The Influence of Progressive Static Load on the Ability of Dental Implants to Withstand Overloading Forces: An Experimental Study in Dogs.

PURPOSE: To examine the effect of controlled progressive orthodontic loading on bone around implants subjected to overloading forces. MATERIALS AND METHODS: Bilateral edentulous alveolar ridges were created in the posterior maxilla of five beagle dogs and left to heal for an 8-week period, after which 40 implants were placed. In the overloading group (OL), 16 implants were inserted and left to osseointegrate for 16 weeks; impressions were made, and metal crowns were mounted on with supraocclusal contacts with the antagonist teeth. Implants were exposed to dynamic overloading for 16 weeks. In the progressive loading + overloading group (PL+OL), 16 implants were left to osseointegrate for 8 weeks, and custom abutment cores were fabricated and coupled by pairs with Ni-Ti orthodontic springs. Ascending static forces of 100g, 200g, and 300g were each applied for a 3-week period, for a total 9-week progressive loading period. Thereafter, metal crowns with supraocclusal contacts were adapted, and a 16-week overloading protocol for implants was followed as for the overloading group. In the unloaded control group (UL), eight implants were inserted and left uncovered and unloaded for 32 weeks, that is, until the end of the experimental period, at which point all 40 implants were removed with the surrounding bone. Histologic, histomorphometric, and statistical analysis followed. RESULTS: Higher bone-to-implant contact percentage was reported for the OL group (P = .006) and PL+OL group (P < .001) compared with the UL group. Between the OL and PL+OL groups, the addition of progressive loading did not increase the bone-to-implant contact percentage (P = .225). Bone density 1 mm and 2 mm distant to the threads did not differ significantly between the three groups. Significantly lower crestal bone resorption was detected around OL group implants (P = .006) and PL+OL group implants (P = .004) compared with the UL group implants. The implant success rate was 87.5% for the UL group, 67.5% for the OL group, and 87.5% for the PL+OL group. CONCLUSION: The application of controlled progressive orthodontic loading on osseointegrated implants preceding overloading forces did not increase bone-to-implant contact. When applied, overloading significantly increased bone-to-implant contact compared with the unloaded implants. A significantly higher implant success rate was reported in the PL+OL group compared with the OL group.

Nodular granulomatous glossitis as the sole clinical sign in canine leishmaniosis.

A 5.5-year-old, intact male Rottweiler dog was admitted with a history of multifocal nodular tongue lesions which progressively deteriorated during the previous year. Physical examination revealed several reddish nodules with central depression on the surface of the tongue in an otherwise healthy dog. Clinicopathologic abnormalities included eosinophilia and hyperproteinemia. Lingual nodule cytopathology, histopathology, and immunohistochemistry revealed Leishmania spp. amastigotes and a severe granulomatous glossitis. The dog was also seroreactive to L infantum antigens by an indirect immunofluorescence assay. Clinical reevaluation 3 months after the institution of treatment with allopurinol and miltefosine indicated that the nodular lesions had completely regressed. In endemic areas, lingual nodular lesions may rarely be the sole clinical sign of canine leishmaniosis. Standard medical treatment may provide an excellent prognosis.

Evaluation of autogenous PRGF+ß-TCP with or without a collagen membrane on bone formation and implant osseointegration in large size bone defects. A preclinical in vivo study.

OBJECTIVES: The aim of this study was to evaluate whether the adjunctive use of a collagen membrane enhances bone formation and implant osseointegration in non-contained defects grafted with chair-side prepared autologous platelet-rich growth factor (PRGF) adsorbed on a ß-TCP particulate carrier. MATERIALS AND METHODS: Large box-type defects (10 × 6 mm; W × D) were prepared in the edentulated and completely healed mandibles of six Beagles dogs. An implant with moderately rough surface was placed in the center of each defect leaving the coronal 6 mm of the implant not covered with bone. The remaining defect space was then filled out with chair-side prepared autologous PRGF adsorbed on ß-TCP particles and either covered with a collagen membrane (PRGF/ß-TCP+CM) (6 defects) or left without a membrane (PRGF/ß-TCP) (5 defects). RESULTS: Histology 4 months post-op showed new lamellar and woven bone formation encompassing almost entirely the defect and limited residual ß-TCP particles. Extent of osseointegration of the previously exposed portion of the implants varied, but in general was limited. Within the defect, new mineralized bone (%) averaged 43.2 ± 9.86 vs. 39.9 ± 13.7 in the PRGF/ß-TCP+CM and PRGF/ß-TCP group (P = 0.22) and relative mineralized bone-to-implant contact (%) averaged 26.2 ± 16.45 vs. 35.91 ± 24.45, respectively (P = 0.5). First, bone-to-implant contact from the implant top was 4.1 ± 1.5 and 3.2 ± 2.3 (P = 0.9), in the PRGF/ß-TCP+CM and PRGF/ß-TCP group, respectively. CONCLUSIONS: Implantation of chair-side prepared autologous PRGF adsorbed on a ß-TCP carrier in non-contained peri-implant defects resulted in large amounts of bone regeneration, but osseointegration was limited. Provisions for GBR with a collagen membrane did not significantly enhance bone regeneration or implant osseointegration.

Bone reactions around dental implants subjected to progressive static load: an experimental study in dogs.

OBJECTIVE: To evaluate histologically and histomorphometrically, the peri-implant bone reaction around implants subjected to controlled progressive orthodontic loading. MATERIALS AND METHODS: In three beagle dogs, bilateral edentulous flat alveolar ridges were created in the maxillary area posterior to the canines. After 8 weeks of healing, 24 implants (Biomet 3i) were inserted in the edentulous sites. Two experimental groups were created. Progressive loading group: Twelve implants were left to heal for 8 weeks uncovered, and abutments were adapted and connected by pairs with Ni-Ti orthodontic springs. A gradual static force of 100, 200 and 300 g was applied for a 3-week period each. Thus, a total progressive loading period of 9 weeks was exercised. Unloaded control group: Twelve implants were left to heal undisturbed. At the end of the experimental period, all implants of both groups were removed with the surrounding bone. Histologic and histomorphometric analyses were performed, and the following parameters were measured: bone-to-implant contact, bone density 1 and 2 mm distant to the implant threads and crestal bone resorption. Median regression models are used for statistical analysis. RESULTS: Implants of the progressive loading group exhibited significantly higher percentage of bone-to-implant contact compared to the unloaded control implants (P = 0.018). Bone density 1 and 2 mm distant to the threads was found to be the same between the two groups (P = 0.734 and P = 0.961, respectively). Crestal bone resorption did not differ between loaded and unloaded implants (P = 0.813). CONCLUSION: The application of progressive loading by controlled orthodontic force on osseointegrated implants provoked significant increase in the percentage of bone-to-implant contact of the low-density bone of the dog maxilla.

Dentinogenic responses after direct pulp capping of miniature swine teeth with Biodentine.

INTRODUCTION: The aim of this study was to evaluate pulpal responses after experimental direct pulp capping of mechanically exposed teeth with a new calcium silicate-based dentin replacement material. METHODS: Thirty-four anterior and posterior teeth of 3 miniature swine were used. Class V or I cavities were prepared on the buccal or occlusal surfaces, respectively. Pulpal exposures were further performed using a round carbide bur 0.8 mm in diameter. Exposures were treated with white MTA Angelus (Angelus, Londrina, PR, Brazil) or Biodentine (Septodont, Saint Maur des Fosses, France), and the cavities were further restored with Biodentine. The pulpal tissue responses were histologically assessed at postoperative periods of 3 and 8 weeks. Data were statistically analyzed using the Kruskal Wallis and the Mann-Whitney U tests. RESULTS: Inflammatory infiltration or pulp tissue necrosis was not found in any of the specimens. All teeth showed mineralized matrix formation in the form of a complete hard tissue bridge composed of osteodentin or osteodentin followed by a discontinuous or continuous reparative dentin zone. A significantly higher thickness of the hard tissue bridge was found in the group of teeth treated with Biodentine at both 3 and 8 weeks. A number of teeth, which were under root development at the onset of the experimental procedures, exhibited ectopic pulp calcification. CONCLUSIONS: The application of both calcium silicate-based materials in direct contact with the mechanically exposed pulp of healthy miniature swine teeth led to pulp repair with complete hard tissue bridge formation. The thickness of hard tissue bridges was significantly higher after pulp capping with Biodentine.

Experimental formation of dentin-like structure in the root canal implant model using cryopreserved swine dental pulp progenitor cells.

OBJECTIVES: The purpose of the present study was to present histological and immunohistochemical evidence showing the regenerative capacity of swine dental pulp stem cells (S-DPSCs) seeded on organic or synthetic scaffolds and implanted as hybrid root implants in the jaw bone of minipigs. METHODS: Immature permanent incisor teeth and unerupted premolars at the early root-forming stage were extracted from three 7-month-old minipigs, and mesenchymal stem/progenitor cells were isolated from dental pulp. Cells were cryopreserved in liquid nitrogen. A year later, new permanent incisor and premolar teeth were extracted; pulp tissue was removed; and pieces of root canals of the extracted teeth, containing collagen or Poly(lactic-co-glycolic acid) scaffolds seeded with the autologous cryopreserved DPSCs, were implanted into the fresh post-extraction socket of the mini pig jaw. The resulting constructs were harvested after 6 and 10 weeks and evaluated by histological and immunohistochemical analyses. RESULTS: Six weeks postoperatively, the central canal space of the root implants showed degrading scaffold material. New extracellular matrix had been deposited in a polar predentin-like pattern on the canal dentinal walls by cuboidal nonpolarized cells. Ten weeks postoperatively, newly formed organic matrix had been consistently deposited on the canal walls. The presence of a continuous layer of polarized cells showing typical columnar morphology adjacent to the newly deposited organic matrix was evident. CONCLUSIONS: The interactions of S-DPSCs with the dentin matrix of roots implanted in the jawbone of minipigs constitute a model to study in vivo organization and differentiation potential of DPSCs.

Periradicular Tissue Responses to Biologically Active Molecules or MTA When Applied in Furcal Perforation of Dogs' Teeth.

The aim of this study was the comparative evaluation of inflammatory reactions and tissue responses to four growth factors, or mineral trioxide aggregate (MTA), or a zinc-oxide-eugenol-based cement (IRM) as controls, when used for the repair of furcal perforations in dogs' teeth. Results showed significantly higher inflammatory cell response in the transforming growth factorß1 (TGFß1) and zinc-oxide-eugenol-based cement (IRM) groups and higher rates of epithelial proliferation in the TGFß1, basic fibroblast growth factor (bFGF), and insulin growth factor-I (IGF-I) groups compared to the MTA. Significantly higher rates of bone formation were found in the control groups compared to the osteogenic protein-1 (OP-1). Significantly higher rates of cementum formation were observed in the IGF-I and bFGF groups compared to the IRM. None of the biologically active molecules can be suggested for repairing furcal perforations, despite the fact that growth factors exerted a clear stimulatory effect on cementum formation and inhibited collagen capsule formation. MTA exhibited better results than the growth factors.

Bone regeneration using beta-tricalcium phosphate in a calcium sulfate matrix.

The aim of the study was the histomorphometric comparison of the osteogenic potential of beta-tricalcium phosphate (beta-TCP) alone or in a calcium sulfate matrix. Three round defects, 10 mm (diameter) x 5 mm (depth), were created on each iliac crest of 4 dogs. The defects were divided into 3 groups. Ten defects were filled with beta-TCP in a calcium sulfate (CS) matrix (Fortoss Vital; group A), 10 defects were filled with beta-TCP alone (Fortoss Resorb; group B), and 4 defects were left ungrafted to heal spontaneously (group C). All defects were left to heal for 4 months without the use of a barrier membrane. Histologic evaluation and morphometric analysis of undecalcified slides was performed using the areas of regenerated bone and graft remnants. All sites exhibited uneventful healing. In group A sites (beta-TCP/CS), complete bone formation was observed in all specimens, graft granules dominated the area, and a thin bridge of cortical bone was covering the defect. Group B (beta-TCP) defects were partially filled with new bone, the graft particles still dominated the area, while the outer cortex was not restored. In the ungrafted sites (group C), incomplete new bone formation was observed. The outer dense cortical layer was restored in a lower level, near the base of the defect. The statistical analysis revealed that the mean percentage of new bone regeneration in group A was higher than in group B (49.38% and 40.31%, respectively). A statistically significant difference existed between the 2 groups. The beta-TCP/CS group exhibited significantly higher new bone regeneration according to a marginal probability value (P = .004 < .05). The use of beta-TCP in a CS matrix produced significantly more vital new bone fill and preserved bone dimensions compared with the use of beta-TCP alone.

Pulpal responses after application of current adhesive systems to deep cavities.

The aim of the present study was to evaluate comparatively the pulpal tissue reactions of four adhesive systems placed in experimental cavities of healthy dog's teeth. Class V cavities with a mean value of remaining dentin thickness (RDT) ranging between 0.55 +/- 0.30-0.68 +/- 0.38 mm were prepared. The cavities were treated with the following adhesive systems: Etch and Prime 3.0 (EP), Single Bond (SB), Clearfil SE Bond (CSE), and Prompt L-Pop (PLP). The pulpal tissue responses to dentin adhesives were assessed histopathologically at postoperative periods of 7, 21, and 65 days, and the results were subjected to statistical analysis. A significantly greater adverse inflammatory response was observed with the materials EP and PLP, while a significantly lesser degree of disorganization in the odontoblastic zone was found with the materials SB and CSE, in the postoperative period of 65 days. In addition, a thicker predentin zone was observed where SB material was applied. Application of the selected adhesive systems to non-exposed cavities, with an RDT, which ranged between the above-mentioned rates, was correlated with slight to moderate inflammation and odontoblast reduction depending on the materials used as well as upon the RDT.

Osseointegration of Osseotite and machined-surfaced titanium implants in membrane-covered critical-sized defects: a histologic and histometric study in dogs.

The texture of an implant's surface can influence the rate and extent of bone fixation as expressed by the amount of linear bone-to-implant contact (BIC). The purpose of this study was to compare the bone density and linear BIC between Osseotite and machined-surface implants placed in bony defects without graft material and covered by a membrane. Thirty 2 mm diameter, 10 mm length custom implants were prepared for this study having a 'split surface,' with one side having the acid-etched surface and the opposite side having a machined surface. Defects were created in the iliac wing of three adult mongrel dogs where a 6-mm-diameter drill was used to generate a 5-mm-deep defect. The implants were inserted into the center of the defect with 5 mm secured into the bone leaving 5 mm free in the defect with a 2 mm gap between the implant and surrounding bone. Expanded polytetrafluroethelyene membranes were placed over the defect sites stabilized with Biotack pins. The healing times were 2, 3, and 5 months. Histologic and histometric analysis showed significantly lower BIC in the defect region as compared with the portion of implant placed into native bone for both implant surfaces in all groups. There was no difference in BIC values at 2- and 5-month periods between the two surfaces in the regenerated area, while BIC values for Osseotite surfaces were significantly higher than the machined surfaces at 3 months' healing time. Changes in bone density, observed between the three groups, affected correspondingly the BIC values in both implant surfaces, the effect being more pronounced in the Osseotite surface.

Osseointegration of Osseotite and machined titanium implants in autogenous bone graft. A histologic and histomorphometric study in dogs.

It has been shown that a roughened implant surface results in a higher percentage of bone to implant contact (%BIC) than a machined one. A modified implant surface using a dual thermo-acid etching process (Osseotite) has been introduced and evaluated clinically, mechanically and histologically. The aim of the present study was the histological evaluation of the %BIC between the Osseotite or machined surfaces and the autogenous bone graft. Twenty-two custom-made split-type 10-mm-long implants having two opposing surfaces (Osseotite and machined) were placed between the cranial and caudal dorsal iliac spine at the iliac wing of two adult mongrel dogs. An artificial bone defect was created leaving a 2 mm empty space around the coronal 5 mm of the implants, while the apical 5 mm was stabilized in the existing basal bone. The defects around the implants were filled with particulate autogenous bone graft, covered by an Osseoquest membrane, and left to heal for 5 months. All inserted implants showed a complete integration in the bone tissue. It was found that the resulting %BIC at the Osseotite surface was significantly higher than at the machined one in both regenerated (46.44+/-15.81% vs. 28.59+/-12.04%) and basal bone areas (32.32+/-15.09% vs. 17.25+/-7.40%). The findings of this study imply that the use of autogenous bone graft resulted in significantly higher %BIC values in the regenerated area than in the basal bone area itself, for both implant surfaces.