RESUMO
INTRODUCTION: Metallic and elastomeric ligatures are widely used in orthodontics to secure the archwire within the bracket slots, but elastomeric ligatures have traditionally been associated with increased microbial colonization, which could adversely affect periodontal health. AIM: This systematic review compares the periodontal effects of elastomeric and steel ligatures used for orthodontic fixed appliances. METHODS: Unrestricted literature search of 7 databases (MEDLINE, Scopus, Web of Science, Embase, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and Virtual Health Library) up to July 2023 were performed for randomized / non-randomized clinical studies on humans comparing the two ligation methods during fixed-appliance therapy. After duplicate study selection, data extraction, and risk-of-bias assessment with the Risk of Bias (RoB) 2 or the Risk Of Bias In Non-randomized Studies - of Interventions (ROBINS-I) tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) and their 95% confidence intervals (CIs) were carried out, followed by assessment of certainty of existing evidence with the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach. RESULTS: A total of 11 studies (3 randomized / 8 non-randomized) with 354 patients (mean age 14.7 years and 42% male) were included. No statistically significant differences were seen for plaque index (5 studies; SMD = 0.48; 95% CI = -0.03 to 1.00; P = 0.07), gingival index (2 studies; MD = 0.01; 95% CI = -0.14 to 0.16; P = 0.89), probing pocket depth (2 studies; MD = 0; 95% CI = -0.17 to 0.16; P = 0.97), or Streptococcus mutans counts (4 studies; SMD = 0.40; 95% CI=-0.41 to 1.20; P = 0.21). Elastomeric ligatures were associated with moderately increased total bacterial load (3 studies; SMD = 0.43; 95% CI = 0.10 to 0.76; P = 0.03). Confidence in these estimates was low in all instances due to the inclusion of non-randomized studies with high risk of bias. CONCLUSIONS: Existing low quality evidence indicates that ligature method does not seem to influence the periodontal health during fixed treatment, even if elastomeric ligatures are associated with a moderate increase of bacterial load. REGISTRATION: PROSPERO (CRD42023444383).
Assuntos
Elastômeros , Aparelhos Ortodônticos Fixos , Humanos , Aço , Índice Periodontal , Braquetes Ortodônticos , LigaduraRESUMO
BACKGROUND: The aim of the present study was to investigate qualitatively and quantitatively the elution of substances from polyester-urethane (Invisalign™) aligners and resin composite attachments (Tetric EvoFlow) in vivo. METHODS: Patients (n = 11) treated with the aligners and attachments (16 per patient, without other composite restorations) for an average of 20 months, who were planned for attachment removed were enrolled in the study. Patients were instructed to rinse with 50 mL of distilled water upon entry and the rinsing solution was collected (before removal). Then, the attachments were removed with low-speed tungsten carbide burs for adhesive residue removal, a thorough water rinsing was performed immediately after the grinding process to discard grinding particle residues, and subsequently, after a second water-rinsing the solution was collected for analysis (after removal). The rinsing solutions were analyzed for targeted (LC-MS/MS: Bis-GMA, DCDMA, UDMA, BPA) and untargeted (LC-HRMS: screening of leached species and their degradation products) compounds. RESULTS: Targeted analysis revealed a significant reduction in BPA after attachment removal (4 times lower). Bis-GMA, DCDMA, UDMA were below the detection limit before removal but were all detectable after removal with Bis-GMA and UDMA at quantifiable levels. Untargeted analysis reviled the presence of mono-methacrylate transformation products of Bis-GMA (Bis-GMA-M1) and UDMA (UDMA-M1), UDMA without methacrylate moieties (UDMA-M2), and 4-(dimethylamino) benzoic acid (DMAB), the degradation product of the photo-initiator ethyl-4-(dimethylamino) benzoate (EDMAB), all after attachment removal. Several amino acids and endogenous metabolites were also found both before and after removal. CONCLUSIONS: Elevated levels of BPA were traced instantaneously in patients treated with Invisalign™ and flowable resin composite attachments for the testing period. BPA was reduced after attachment removal, but residual monomers and resin degradation products were found after removal. Alternative resin formulations and attachment materials may be utilized to reduce eluents.
Assuntos
Resinas Compostas , Metacrilatos , Poliuretanos , Humanos , Poliuretanos/química , Resinas Compostas/química , Feminino , Masculino , Metacrilatos/química , Saliva/química , Bis-Fenol A-Glicidil Metacrilato/química , Adulto , Aparelhos Ortodônticos Removíveis , Poliésteres/química , para-Aminobenzoatos/análise , Adulto Jovem , Adolescente , Técnicas de Movimentação Dentária/instrumentação , Técnicas de Movimentação Dentária/métodos , Espectrometria de Massas em Tandem , Cromatografia LíquidaRESUMO
BACKGROUND: Craniofacial skeletal discrepancies have been associated with upper airway dimensions. OBJECTIVE: To identify differences in upper airway volume across different sagittal and vertical skeletal patterns. SEARCH METHODS: Unrestricted literature searches in eight databases/registers for human studies until May 2023. SELECTION CRITERIA: Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology. DATA COLLECTION AND ANALYSIS: Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach. RESULTS: Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total pharyngeal airway volume, with Class II having decreased airway volume (-2256.06 mm3; 95% Confidence Interval [CI] -3201.61 to -1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (-1716.77 mm3; 95% CI -3296.42 to -137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA. CONCLUSIONS: Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children-adult patients, and incomplete reporting. CLINICAL TRIAL REGISTRATION: PROSPERO (CRD42022366928).
Assuntos
Metanálise em Rede , Faringe , Humanos , Faringe/diagnóstico por imagem , Faringe/anatomia & histologia , Imageamento Tridimensional/métodos , Ossos Faciais/anatomia & histologia , Ossos Faciais/diagnóstico por imagem , Má Oclusão/diagnóstico por imagem , Má Oclusão/patologiaRESUMO
AIM: Two-phase treatment for children with Class II malocclusion with several functional appliances is still performed by many orthodontists, while the Activator and the Bionator appliances are two of the most popular ones. Aim of this study was to compare the skeletal and dentoalveolar effects of treatment with these two appliances. METHODS: Class II children treated with Activator or Bionator in the first phase, followed by a phase of fixed appliances were included. Skeletal and dentoalveolar parameters were assessed from lateral cephalograms and analysed with linear regressions at 5%. RESULTS: A total of 89 patients (mean age 10.0 years; 47% female) were included. During the first phase, Bionator increased less the SNB (difference in mean treatment-induced changes [MD] -0.7°; 95% confidence interval [CI] -1.3 to -0.2°; P=0.01) and decreased less the ANB angle (MD 0.6°; 95% CI 0 to 1.1°; P=0.03) compared to Activator. Activator slightly increased the facial axis and Bionator reduced it (MD -1.6°; 95% CI -2.3 to -0.8°; P<0.001). Compared to Activator, the Bionator retroclined more the upper incisors (MD -2.4°; 95% CI -4.6 to -0.2°; P=0.03) and increased more the interincisal angle (MD 2.9°; 95% CI 0.5 to 5.4°; P=0.02). After the second phase (6.2 years after baseline), the only differences were a reduced facial axis (MD -1.3°; 95% CI -2.2 to -0.3°; P=0.008) and an increased maxillary rotation (MD 0.9°; 95% CI 0 to 1.8°; P=0.04) with Bionator compared to Activator. CONCLUSION: Similar dentoalveolar effects were seen overall with two-phase treatment with either appliance, with Bionator being associated with more vertical increase compared to Activator.
Assuntos
Aparelhos Ativadores , Cefalometria , Má Oclusão Classe II de Angle , Maxila , Aparelhos Ortodônticos Fixos , Humanos , Má Oclusão Classe II de Angle/terapia , Feminino , Masculino , Criança , Estudos Retrospectivos , Mandíbula , Resultado do Tratamento , Desenho de Aparelho Ortodôntico , Aparelhos Ortodônticos Funcionais , Incisivo , Sela Túrcica , Osso Nasal , Ortodontia Corretiva/instrumentação , Ortodontia Corretiva/métodosRESUMO
OBJECTIVE: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic. METHODS: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"-slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post-debond (T3) and analysed statistically at 5%. RESULTS: A total of 157 patients were included (56.7% female; 11.6-year-old at T1), 16.6% of which were treated with premolars extractions. Non-extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P = .04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P > .05) or the first permanent molar (0.06 mm; P > .05). No overall significant differences in absolute relapse were seen between extraction and non-extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%-confidence interval 0.08-0.88; P = .003). CONCLUSION: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse.
Assuntos
Recidiva , Humanos , Feminino , Estudos Longitudinais , Estudos Retrospectivos , Masculino , Criança , Sobremordida/terapia , Aparelhos Ortodônticos Fixos , Adolescente , Extração Dentária , Ortodontia Corretiva/métodosRESUMO
PURPOSE: The purpose of this study was to assess differences in the fundamental mechanical properties of resin-made three-dimensional (3D) printed orthodontic aligners according to the printing orientation. METHODS: Twenty resin 3D-printed dumbbell-shaped specimens and 20 orthodontic aligners were fabricated and postcured in nitrogen. Half of the specimens and aligners were built in horizontal (H), the other half in vertical (V) directions. The dumbbell-shaped specimens were loaded in a tensile testing machine, while parts of the aligners were embedded in acrylic resin, ground, polished, and then underwent instrumented indentation testing (IIT). Mechanical properties that were assessed included the yield strength (YS), breaking strength (BS), plastic strain (ε), Martens hardness (HM), indentation modulus (EIT), elastic index (ηIT), and indentation relaxation (RIT). Data were analyzed statistically with independent ttests or Mann-Whitney tests at αâ¯= 5%. RESULTS: No significant differences were found between specimens or aligners printed either in a horizontal or a vertical direction (Pâ¯> 0.05 in all instances). Overall, the 3D-printed aligners showed acceptable mechanical propertied in terms of YS (mean 19.2â¯MPa; standard deviation [SD] 1.7â¯MPa), BS (mean 19.6â¯MPa; SD 1.2â¯MPa), ε (mean 77%; SD 11%), HM (median 89.0â¯N/mm2; interquartile range [IQR] 84.5-90.0 NN/m2), EIT (median 2670.5â¯MPa; IQR 2645.0-2726.0â¯MPa), ηIT (median 27.5%; IQR 25.9-28.1%), and RIT (mean 65.1%; SD 3.5%). CONCLUSION: Printing direction seemed to have no effect on the mechanical properties of 3D-printed resin aligners, which are promising for orthodontic use.
RESUMO
INTRODUCTION: This study aimed to discover the genetic and environmental factors that contribute to the mandibular development of untreated monozygotic and dizygotic twins. MATERIAL AND METHODS: The sample, taken from the Forsyth Moorrees Twin Study, included 52 untreated monozygotic twins (36 male, 16 female) and 46 untreated dizygotic twins (23 male, 23 female). At the ages of 12 and 17, lateral cephalograms were collected and traced to assess total mandibular length, mandibular ramus length, mandibular corpus length, gonial angle, SNB, and bony chin prominence. The genetic and environmental components of variation were assessed using multilevel mixed-effects structural equation modelling. RESULTS: At 12 years of age, high additive genetic influences were observed for total mandibular length (74%), gonial angle (76%), SNB (41%), and bony chin prominence (64%), whereas strong dominant genetic components were observed for corpus length (72%), and mandibular ramus length was under unique environment influence (54%). At 17 years of age, only total mandibular length (45%), ramus length (53%), gonial angle (76%), and bony chin prominence (68%) were under strong additive genetic control, while the remainder were under strong dominant genetic control. CONCLUSIONS: Although monozygotic and dizygotic twins share at least a portion of their DNA, additive, dominant, or environmental components were discovered during adolescence. Nonetheless, by the age of 17, the majority of the mandibular traits are under either additive or dominant genetic impact.
Assuntos
Gêmeos Dizigóticos , Gêmeos Monozigóticos , Adolescente , Feminino , Humanos , Masculino , Meio Ambiente , Mandíbula , Estudos Retrospectivos , Gêmeos Dizigóticos/genética , Gêmeos Monozigóticos/genética , Estudos de CoortesRESUMO
BACKGROUND: Cervical headgear (cHG) has been shown to be effective in Class II correction both with dental and orthopaedic effects but has traditionally been associated with vertical adverse effects in terms of posterior mandibular rotation. OBJECTIVE: To assess the treatment effects of cHG treatment in the vertical dimension. SEARCH METHODS: Unrestricted literature search of five databases up to May 2023. SELECTION CRITERIA: Randomized/non-randomized clinical studies comparing cHG to untreated controls, high-pull headgear (hp-HG), cHG adjuncts, or other Class II treatment alternatives (functional appliances or distalisers). DATA COLLECTION AND ANALYSIS: After duplicate study selection, data extraction, and risk-of-bias assessment according to Cochrane, random-effects meta-analyses of mean differences (MD)/standardized mean diffences (SMD) and their 95% confidence intervals (CIs) were performed, followed by meta-regressions, sensitivity analyses, and assessment of certainty on existed evidence. RESULTS: Two randomized/16 non-randomized studies (12 retrospective/4 prospective) involving 1094 patients (mean age 10.9 years and 46% male) were included. Compared to natural growth, cHG treatment was not associated on average with increases in mandibular (eight studies; SMD 0.22; 95% CI -0.06, 0.49; P = 0.11) or maxillary plane angle (seven studies; SMD 0.81; 95% CI -0.34, 1.95; P=0.14). Observed changes translate to MDs of 0.48° (95% CI -0.13, 1.07°) and 1.22° (95% CI -0.51, 2.94°) in the SN-ML and SN-NL angles, respectively. No significant differences were seen in y-axis, facial axis angle, or posterior face height (P > 0.05). Similarly, no significant differences were found between cHG treatment and (i) addition of a lower utility arch, (ii) hp-HG treatment, and (iii) removable functional appliance treatment (P > 0.05 for all). Meta-regressions of patient age, sex, or duration and sensitivity analyses showed relative robustness, while our confidence in these estimates was low to very low due to the risk of bias, inconsistency, and imprecision. CONCLUSIONS: cHG on average is not consistently associated with posterior rotation of the jaws or a consistent increase in vertical facial dimensions among Class II patients. REGISTRATION: PROSPERO registration (CRD42022374603).
Assuntos
Má Oclusão Classe II de Angle , Ortodontia Corretiva , Humanos , Masculino , Criança , Feminino , Estudos Retrospectivos , Estudos Prospectivos , Ortodontia Corretiva/métodos , Má Oclusão Classe II de Angle/terapia , Maxila , Aparelhos de Tração Extrabucal , CefalometriaRESUMO
OBJECTIVES: Three-dimensional (3D)-printed aligners present a promising orthodontic treatment modality, whose clinical success largely depends on the material's mechanical properties. The aim of this study was to evaluate the mechanical properties of resin-made 3D-printed aligners and assess the effect of two different post-curing conditions. MATERIALS AND METHODS: Forty dumbbell-shaped specimens and 40 resin aligners were 3D-printed and divided into four equal groups according to post-curing conditions: presence or absence of oxygen during post-curing and water heat treatment at 85°C for 15 s or none. Samples from the central incisor of the aligner (nâ =â 5/group) were studied by Attenuated Total Reflection Fourier-transform infrared spectroscopy (ATR-FTIR). The dumbbell-shaped specimens were loaded up to fracture under tensile mode and yield strength, ultimate tensile strength, elastic and plastic strain were calculated. The first mandibular molar area from 3D-printed aligners (nâ =â 10/group) was cut and embedded in acrylic resin and then underwent metallographic grinding and polishing followed by instrumented indentation testing to determine the following mechanical properties: Martens hardness, indentation modulus, elastic index, and indentation relaxation. After descriptive statistics, differences according to each post-curing protocol, as well as their combination, were analyzed with linear regression modeling at a 5% significance level. RESULTS: All groups showed identical ATR-FTIR spectra, while no statistically significant effects were seen for either post-curing protocol (N2 presence and heat treatment) or their combination (Pâ >â .05 in all instances). CONCLUSIONS: The mechanical properties of 3D-printed resin aligners were not considerably affected either by post-curing in N2 atmosphere or heat treatment.
Assuntos
Temperatura Alta , Dente , Humanos , Dureza , Impressão Tridimensional , Teste de Materiais , Propriedades de SuperfícieRESUMO
This review covers aspects of orthodontic materials, appliance fabrication and bonding, crossing scientific fields and presenting recent advances in science and technology. Its purpose is to familiarize the reader with developments on these issues, indicate possible future applications of such pioneering approaches, and report the current status in orthodontics. The first section of this review covers shape-memory polymer wires, several misconceptions arising from the recent introduction of novel three-dimensional (3D)-printed aligners (mistakenly termed shape-memory polymers only because they present a certain degree of rebound capacity, as most non-stiff alloys or polymers do), frictionless surfaces enabling resistance-less sliding, self-healing materials for effective handling of fractured plastic/ceramic brackets, self-cleaning materials to minimize microbial attachment or plaque build-up on orthodontic appliances, elastomers with reduced force relaxation and extended stretching capacity to address the problem of inadequate force application during wire-engagement in the bracket slot, biomimetic (non-etching mediated) adhesive attachment to surfaces based on the model of the gecko and the mussel, and command-debond adhesives as options for an atraumatic debonding. This review's second section deals with the recent and largely unsubstantiated application of 3D-printed alloys and polymers in orthodontics and aspects of planning, material fabrication, and appliance design.
RESUMO
BACKGROUND: Maxillary incisor and canine teeth are commonly impacted and require multidisciplinary treatment to accommodate them in the dental arch. OBJECTIVES: To assess the periodontal outcomes of impacted maxillary central incisor and canine teeth, which have been successfully aligned in the arch following surgical exposure and orthodontic traction with fixed appliance therapy. SEARCH METHODS: Systematic literature searches without restrictions were undertaken in eight databases. SELECTION CRITERIA: Studies reporting surgical interventions in combination with orthodontic traction with fixed appliance therapy to align impacted maxillary incisors or canines published up to January 2023. DATA COLLECTION: Duplicate independent study selection, data extraction, and risk of bias assessment. ANALYSIS: Random-effects meta-analyses of aggregate data. RESULTS: Twenty-three studies (21 retrospective and 2 prospective) were included in the final analysis. Three studies reported outcomes for maxillary central incisors and 20 reported outcomes for maxillary canines. For maxillary central incisors, all three studies were rated as being at moderate risk of bias. For maxillary canines, 17 studies and 1 study were rated at moderate and high risk of bias, respectively. Both prospective studies were rated at a low risk of bias. Meta-analyses comparing aligned impacted maxillary canines to their non-impacted contralateral counterparts found the former had increased Plaque Index scores (mean difference [MD] 0.19; 95% confidence interval [CI] 0.03, 0.35; P = 0.03), increased clinical attachment loss (MD 0.40 mm; 95% CI 0.17, 0.63; P = 0.01), increased pocket probing depth (MD 0.18 mm; 95% CI 0.07, 0.28; P = 0.001), increased bone loss (MD 0.51 mm; 95% CI 0.31, 0.72; P < 0.001), and reduced keratinized gingival width (MD -0.31 mm; 95% CI -0.61, -0.01; P = 0.04). CONCLUSIONS: Limited evidence suggests that surgical exposure and orthodontic alignment of impacted maxillary central incisor or canine teeth, results in modest adverse effects in the periodontium. These findings should be viewed with caution as our certainty for these outcomes is very low to low due to the bias and heterogeneity. Further well-conducted studies reporting patient centred outcomes are required. REGISTRATION: PROSPERO (CRD42020225639).
Assuntos
Dente Canino , Dente Impactado , Humanos , Incisivo , Estudos Prospectivos , Estudos Retrospectivos , Dente Impactado/cirurgiaRESUMO
PURPOSE: Aim of the present study was to assess the relative distribution of occlusal forces after orthodontic treatment and during the first 3 months of the retention phase using a computerized occlusal analysis system (T-Scan, Tekscan Inc., Norwood, MA, USA). MATERIALS AND METHODS: A total of 52 patients were included in this prospective cohort study and underwent analysis of occlusal forces on the level of tooth, jaw-half, and -quadrant during a 3-month period. Furthermore, differences between three retention protocols (group I: removable appliances in both jaws; group II: fixed 3-3 lingual retainers in both jaws; group III: removable appliance in the maxilla and fixed 3-3 lingual retainer in mandible) were assessed with Wilcoxon signed-rank tests at 5%. RESULTS: Directly after debonding, measured forces distribution were similar to published references for untreated samples. In the following, no significant difference was found between retention protocols II and III with regard to the asymmetry of the anterior occlusal forces. Both groups maintained an asymmetric force distribution in the anterior segment during the study period. There was also no difference between groups II and III in the distribution of occlusal forces for the posterior segments. Both retention concepts kept the symmetrical distribution of occlusal forces stable over the observation period. The retention concept of group I demonstrated a symmetrical distribution of occlusal forces in the anterior segment after debonding and this remained stable during the 3month period. In the posterior segment, no improvement of the initially asymmetric masticatory force distribution could be observed. CONCLUSIONS: All three studied retention protocols showed stability in retaining their original symmetrical or asymmetrical occlusal force distribution posteriorly/anteriorly during the 3month observation period. Therefore, an even distribution of occlusal forces should be the aim of the finishing phase, as no relative benefit of any single retention scheme in terms of post-debond improvement during the retention phase was seen.
RESUMO
Introduction Orthodontic service provision relies on good organisational systems for high standards of patient care and safety. Human factors (HFs) are non-technical skills associated with communication, leadership and teamwork, important for safe patient care. This investigation explored attitudes and understanding of HFs within orthodontic clinical training in the United Kingdom.Materials and methods A questionnaire-based qualitative and quantitative analysis including members of the orthodontic clinical team was undertaken at two teaching centres. A modified Operating Rooms Managements Attitudes questionnaire was used with a 5-point Likert scale. Participants indicated agreement or disagreement with statements around nine themes: leadership structure; confidence assertion; information sharing; stress; fatigue; teamwork; work values; error-procedural compliance; and organisational climate. Internal consistency among themes was assessed with Cronbach's alpha and differences in responses with chi-squared tests at 5%.Results In total, 80 responses were received from 96 invitees. Positive attitudes towards teamwork, error-procedural compliance, and organisational climate were found. Orthodontic consultants, trainees, and nurses recognised that human error is not a sign of incompetence. Stress and fatigue were less acknowledged by consultants and trainee groups. Trainees, nurses and therapists valued information sharing over the consultant group. Orthodontic trainees and nurse responses suggested further training might be required in leadership structure, confidence assertion, and work values.Conclusions Differences in attitudes and understanding of HFs within different professional groups in the orthodontic team exist.
RESUMO
INTRODUCTION: A failure of maxillary incisor eruption is commonly attributed to the presence of a supernumerary tooth. This systematic review aimed to assess the percentage of impacted maxillary incisors that successfully erupt after surgical removal of supernumerary teeth with or without other interventions. METHODS: Systematic literature searches without restrictions were undertaken in 8 databases for studies reporting any intervention aimed at facilitating incisor eruption, including surgical removal of the supernumerary alone or in conjunction with additional interventions published up to September 2022. After duplicate study selection, data extraction, and risk of bias assessment according to the risk of bias in nonrandomized studies of interventions and Newcastle-Ottawa scale, random-effects meta-analyses of aggregate data were conducted. RESULTS: Fifteen studies (14 retrospective and 1 prospective) were included with 1058 participants (68.9% male; mean age, 9.1 years). The pooled eruption prevalence for removal of the supernumerary tooth with space creation or removal of the supernumerary tooth with orthodontic traction was significantly higher at 82.4% (95% confidence interval [CI], 65.5-93.2) and 96.9% (95% CI, 83.8-99.9) respectively, compared with removal of an associated supernumerary only (57.6%; 95% CI, 47.8-67.0). The odds of successful eruption of an impacted maxillary incisor after removal of a supernumerary were more favorable if the obstruction was removed in the deciduous dentition (odds ratio [OR], 0.42; 95% CI, 0.20-0.90; P = 0.02); if the supernumeraries were conical (OR, 2.91; 95% CI, 1.98-4.28; P <0.001); if the incisor was in the correct position (OR, 2.19; 95% CI, 1.14-4.20; P = 0.02), at the level of the gingival third (OR 0.07; 95% CI, <0.01-0.97; P = 0.04) and had incomplete root formation (OR, 9.02; 95% CI, 2.04-39.78; P = 0.004). Delaying removal of the supernumerary tooth 12 months after the expected eruption time of the maxillary incisor (OR, 0.33; 95% CI, 0.10-1.03; P = 0.05) and waiting >6 months for spontaneous eruption after removal of the obstacle (OR, 0.13; 95% CI, 0.03-0.50; P = 0.003) was associated with worse odds for eruption. CONCLUSIONS: Limited evidence indicated that the adjunctive use of orthodontic measures and removal of supernumerary teeth might be associated with greater odds of successfull impacted incisor eruption than removal of the supernumerary tooth alone. Certain characteristics related to supernumerary type and the position or developmental stage of the incisor may also influence successful eruption after removal of the supernumerary. However, these findings should be viewed with caution as our certainty is very low to low because of bias and heterogeneity. Further well-conducted and reported studies are required. The results of this systematic review have been used to inform and justify the iMAC Trial.
Assuntos
Dente Impactado , Dente Supranumerário , Humanos , Masculino , Criança , Feminino , Incisivo/cirurgia , Dente Supranumerário/complicações , Dente Supranumerário/cirurgia , Estudos Retrospectivos , Estudos Prospectivos , Dente Impactado/cirurgia , Erupção Dentária , Maxila/cirurgiaRESUMO
INTRODUCTION: This study aimed to evaluate changes in palatal shape after orthodontic treatment from a borderline sample of extraction and nonextraction patients with a Class I relationship. METHODS: A borderline sample regarding premolar extractions was obtained through discriminant analysis and comprised 30 nonextraction and 23 extraction patients. The digital dental casts of these patients were digitized with 3 curves and 239 landmarks placed on the hard palate. Procrustes superimposition and principal component analysis were implemented to assess group shape variability patterns. RESULTS: The success of the discriminant analysis in identifying a borderline sample regarding the extraction modality was validated using geometric morphometrics. Concerning palatal shape, no sexual dimorphism was found (P = 0.78). The first 6 principal components that were statistically significant accounted for 79.2% of the total shape variance. Palatal changes were 61% more pronounced in the extraction group, which exhibited a decrease in palatal length (P = 0.02; 10,000 permutations). In contrast, the nonextraction group showed an increase in the palatal width (P <0.001; 10,000 permutations). Intergroup comparisons indicated that the nonextraction group exhibited longer palates, whereas the extraction group exhibited higher palates (P = 0.02; 10,000 permutations). CONCLUSIONS: Considerable changes in palatal shape were seen for the nonextraction and extraction treatment group, with the latter exhibiting more pronounced changes, mainly in terms of palatal length. Further investigations are needed to clarify the clinical significance of the palatal shape changes in borderline patients after extraction and nonextraction treatment.
Assuntos
Palato , Extração Dentária , Humanos , Cefalometria , Dente Pré-Molar/cirurgiaRESUMO
OBJECTIVE: To assess the pain profile of patients in the levelling/alignment phase of orthodontic treatment, as reported from randomized clinical trials. MATERIALS AND METHODS: Five databases were searched in September 2022 for randomized clinical trials assessing pain during levelling/alignment with a visual analogue scale (VAS). After duplicate study selection, data extraction, and risk-of-bias assessment, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression, and certainty analyses. RESULTS: A total of 37 randomized trials including 2277 patients (40.3% male; mean age 17.5 years) were identified. Data indicated quick pain initiation after insertion of orthodontic appliances (n = 6; average = 12.4 mm VAS), a quick increase to a peak at day 1 (n = 29; average = 42.4 mm), and gradually daily decrease the first week until its end (n = 23; average = 9.0 mm). Every second patient reported analgesic use at least once this week (n = 8; 54.5%), with peak analgesic use at 6 h post-insertion (n = 2; 62.3%). Patients reported reduced pain in the evening compared to morning (n = 3; MD = - 3.0 mm; 95%CI = - 5.3, - 0.6; P = 0.01) and increased pain during chewing (n = 2; MD = 19.2 mm; 95% CI = 7.9, 30.4; P < 0.001) or occlusion of the back teeth (n = 2; MD = 12.4 mm; 95% CI = 1.4, 23.4; P = 0.3), while non-consistent effects were seen for patient age, sex, irregularity, or analgesic use. Subgroup analyses indicated increased pain among extraction cases and during treatment of the lower (rather than the upper) arch, while certainty around estimates was moderate to high. CONCLUSIONS: Evidence indicated a specific pain profile during orthodontic levelling/alignment, without signs of consistent patient-related influencing factors.
Assuntos
Aparelhos Ortodônticos Fixos , Dor , Humanos , Masculino , Adolescente , Feminino , Ensaios Clínicos Controlados Aleatórios como Assunto , Analgésicos/uso terapêuticoRESUMO
PURPOSE: Orthodontic treatment involving premolar extractions might improve the angulation of lower third molars, which are the teeth most often impacted. This study analyzes the impact of first/second lower premolar extraction during orthodontic therapy on the angulation of mandibular third molars. METHODS: A total of 120 patients treated non-extraction (nâ¯= 40), with extraction of first (nâ¯= 40), or second lower premolars (nâ¯= 40) were included. The mesiodistal angulation of lower third molars relative to the adjacent tooth and their developmental stage were evaluated from posttreatment orthopantomograms. Between-group differences were statistically evaluated at a significance level of 0.05. RESULTS: The orthopantomograms of 120 patients (51% female) with a median age of 15.2 years at the time of debonding were evaluated after a mean treatment duration time of 2.9 years. No difference (Pâ¯> 0.05) was seen between the average angulation of the lower third molars of the right (meanâ¯= 24.4°, standard deviation [SD] 13.6°) and the left side (meanâ¯= 23.6°, SD 14.1°). No differences in the angulation of the lower third molar were found between the non-extraction and extraction groups for the right (Pâ¯= 0.44) or the left side (Pâ¯= 0.22). Likewise, no differences were found when comparing the first and second premolars for the right (Pâ¯= 0.26) or the left side (Pâ¯= 0.10). Premolar extraction was associated with an advanced root development stage of the right third molar (odds ratio 7.1; 95% confidence interval 1.1-48.1; Pâ¯= 0.04), with no differences between extraction of the first or second premolar (Pâ¯= 0.10). CONCLUSION: Orthodontic treatment involving premolars extractions might be associated with a small acceleration in root development, but not with the angulation, of lower third molars.
RESUMO
OBJECTIVES: Three-dimensional (3D) printing technology is a promising manufacturing technique for fabricating ceramic brackets. The aim of this research was to assess fundamental mechanical properties of in-office, 3D printed ceramic brackets. MATERIALS AND METHODS: 3D-printed zirconia brackets, commercially available polycrystalline alumina ceramic brackets (Clarity, 3 M St. Paul, MN) and 3D-printed customized polycrystalline alumina ceramic ones (LightForce™, Burlington, Massachusetts) were included in this study. Seven 3D printed zirconia brackets and equal number of ceramic ones from each manufacturer underwent metallographic grinding and polishing followed by Vickers indentation testing. Hardness (HV) and fracture toughness (K1c) were estimated by measuring impression average diagonal length and crack length, respectively. After descriptive statistics calculation, group differences were analysed with 1 Way ANOVA and Holm Sidak post hoc multiple comparison test at significance level α = .05. RESULTS: Statistically significant differences were found among the materials tested with respect to hardness and fracture toughness. The 3D-printed zirconia proved to be less hard (1261 ± 39 vs 2000 ± 49 vs 1840 ± 38) but more resistant to crack propagation (K1c = 6.62 ± 0.61 vs 5.30 ± 0.48 vs 4.44 ± 0.30 MPa m1/2 ) than the alumina brackets (Clarity and Light Force respectivelty). Significant differences were observed between the 3D printed and the commercially available polycrystalline alumina ceramic brackets but to a lesser extent. CONCLUSIONS: Under the limitations of this study, the 3D printed zirconia bracket tested is characterized by mechanical properties associated with advantageous orthodontic fixed appliances traits regarding clinically relevant parameters.
Assuntos
Óxido de Alumínio , Cerâmica , Dureza , Teste de Materiais , Óxido de Alumínio/química , Propriedades de SuperfícieRESUMO
PURPOSE: To identify clinically relevant factors for changes in axial angulation of incisors during routine fixed appliance orthodontic treatment. METHODS: A total of 106 patients (grades 1-2 of IOTN, 64 females, 42 males; mean age: 15.5 years) from a private practice and treated with metal or ceramic brackets were included in this retrospective cohort study. The axial angulation of the upper and lower incisors was measured on lateral cephalograms before insertion of the first rectangular 0.016 × 0.022-in NiTi archwire (T0) and at the end of treatment about 8 weeks after insertion of the working 0.019 × 0.025-in stainless steel archwire (T1). Treatment-related changes according to bracket type, initial situation, premolar extraction, angle class, and skeletal vertical configuration were analyzed. RESULTS: Although statistically significant treatment-related changes were seen for both the upper incisors (+ 1.3°) and the lower incisors (- 5.2°), only in ten patients (9.4%) was the prescribed torque value of 17° for the upper incisors and in no patient for the lower incisors achieved. A negative association between the induced change of axial angulation of incisors and the initial values was detected for the upper incisors as well as for the lower incisors. A comparison of the angle classes revealed significant differences in incisor changes. At the end of therapy, only a slight change for the upper central incisors in patients in angle class I cases and a significantly greater change in patients with angle class II/2 was observed. Cases with premolar extraction ended with lower axial angulation of the incisor than cases without extraction. The individual analysis of possible influencing factors also revealed an association with the vertical skeletal configuration. CONCLUSIONS: For the first time, the presented data show clinically relevant influencing factors for incisor axial angulation changes of the upper and lower incisors in relation to the torque value of the applied brackets in the course of routine clinical practice. For the orthodontist, it remains mandatory to decide whether a customized system must be individualized in order to achieve individual therapy goals.
Assuntos
Incisivo , Braquetes Ortodônticos , Masculino , Feminino , Humanos , Adolescente , Estudos Retrospectivos , Desenho de Aparelho Ortodôntico , Aparelhos Ortodônticos Fixos , Torque , Fios OrtodônticosRESUMO
INTRODUCTION: Space closure is a challenging and time-consuming phase of orthodontic treatment with fixed appliances. This systematic review evaluated canine retraction duration using fixed appliances after maxillary first premolar extraction. METHODS: Unrestricted systematic literature searches were conducted in 8 databases for randomized clinical trials, assessing the duration and rate of maxillary canine retraction using fixed appliances with or without treatment adjuncts published up to July 2021. Study selection, data extraction, and risk of bias evaluation were conducted independently and in duplicate. Random-effects meta-analyses of average rates or mean differences (MD) and 95% confidence intervals (CI) were conducted at α = 5%, followed by sensitivity and Grading of Recommendations Assessment, Development, and Evaluation analysis. RESULTS: Fifty randomized clinical trials (6 parallel and 44 split-mouth designs) covering 811 participants (mean age 19.9 years; 34% male) were included. The estimated average pooled duration to achieve complete canine retraction was 4.98 months (2 trials; 95% CI, -2.9 to 12.88 months). Pooled average canine retraction was 0.97 mm at months 0-1 (23 trials; 95% CI, 0.79-1.16), 1.83 mm at months 0-2 (20 trials; 95% CI, 1.52-2.14), 2.44 mm at months 0-3 (23 trials; 95% CI, 2.10-2.79), 3.49 mm at months 0-4 (6 trials; 95% CI, 1.81-5.17) and 4.25 mm at months 0-5 (2 trials; 95% CI, 0.36-8.14). Surgically-assisted orthodontics was associated with greater canine retraction at all time points: months 0-1 (10 trials; MD, 0.52 mm; P = 0.004), months 0-2 (8 trials; MD, 0.53 mm; P = 0.04), months 0-3 (8 trials; MD, 0.67 mm; P = 0.01), and months 0-4 (3 trials; MD, 1.13 mm; P = 0.01), whereas subgroup analyses indicated significant effects of anchorage reinforcement method and bracket slot size on canine retraction. CONCLUSIONS: The average time to achieve complete retraction of the maxillary canine using fixed appliances was around 5.0 months. Most studies used split-mouth randomization to investigate canine retraction for around 1-3 months, with substantial heterogeneity across studies. At 3 months of treatment, high-quality evidence supported greater canine retraction with surgically-assisted orthodontics.