Rapid and conformal coating of polymer resins by airbrushing for continuous and high-speed roll-to-roll nanopatterning: parametric quality controls and extended applications.

We present a facile and scalable coating method based on controlled airbrushing, which is suitable for conformal resin coating in continuous roll-to-roll (R2R) nanoimprint lithography (NIL) process. By controlling the concentration of UV-curable polymeric resin with mixing the volatile solvent and its airbrushing time, the coated resin film thickness can be readily tuned. After R2R NIL using a flexible nanoscale line pattern (nanograting) mold is conducted upon the airbrushed resin film, a large-area uniform nanograting pattern is fabricated with controlled residual layer thickness (RLT) based on the initial film thickness. We investigate the faithful airbrushing condition that can reliably create the uniform thin films as well as various nanopatterns with controlled morphologies. Using more diluted resin and shorter airbrushing time can reduce the RLTs favourably for many applications, yet is apt to induce the nanoscale pores and discontinued lines. We also discuss how to further improve the quality and scalability of resin airbrushing and its potential applications particularly requiring high-speed and conformal coating on highly topographic and flexible surfaces.

Influence of Aggregate Coated with Modified Sulfur on the Properties of Cement Concrete.

This paper proposes the mixing design of concrete having modified sulfur-coated aggregate (MSCA) to enhance the durability of Portland cement concrete. The mechanical properties and durability of the proposed MSCA concrete were evaluated experimentally. Melting-modified sulfur was mixed with aggregate in order to coat the aggregate surface at a speed of 20 rpm for 120 s. The MSCA with modified sulfur corresponding to 5% of the cement weight did not significantly affect the flexural strength in a prism concrete beam specimen, regardless of the water-cement ratio (W/C). However, a dosage of more than 7.5% decreased the flexural strength. On the other hand, the MSCA considerably improved the resistance to the sulfuric acid and the freezing-thawing, regardless of the sulfur dosage in the MSCA. The coating modified sulfur of 5% dosage consequently led to good results for the mechanical properties and durability of MSCA concrete.

Comparison of conventional lateral cephalograms with corresponding CBCT radiographs.

PURPOSE: This study was performed to assess the compatibility of cone beam computed tomography (CBCT) synthesized cephalograms with conventional cephalograms, and to find a method for obtaining normative values for three-dimensional (3D) assessments. MATERIALS AND METHODS: The sample group consisted of 10 adults with normal occlusion and well-balanced faces. They were imaged using conventional and CBCT cephalograms. The CBCT cephalograms were synthesized from the CBCT data using OnDemand 3D software. Twenty-one angular and 12 linear measurements from each imaging modality were compared and analyzed using paired-t test. RESULTS: The linear measurements between the two imaging modalities were not statistically different (p>0.05) except for the U1 to facial plane distance. The angular measurements between the two imaging modalities were not statistically different (p>0.05) with the exception of the gonial angle, ANB difference, and facial convexity. CONCLUSION: Two-dimensional cephalometric norms could be readily used for 3D quantitative assessment, if corrected for lateral cephalogram distortion.