Motor Interaction Control Based on Muscle Force Model and Depth Reinforcement Strategy.

The current motion interaction model has the problems of insufficient motion fidelity and lack of self-adaptation to complex environments. To address this problem, this study proposed to construct a human motion control model based on the muscle force model and stage particle swarm, and based on this, this study utilized the deep deterministic gradient strategy algorithm to construct a motion interaction control model based on the muscle force model and the deep reinforcement strategy. Empirical analysis of the human motion control model proposed in this study revealed that the joint trajectory correlation and muscle activity correlation of the model were higher than those of other comparative models, and its joint trajectory correlation was up to 0.90, and its muscle activity correlation was up to 0.84. In addition, this study validated the effectiveness of the motion interaction control model using the depth reinforcement strategy and found that in the mixed-obstacle environment, the model's desired results were obtained by training 1.1 × 103 times, and the walking distance was 423 m, which was better than other models. In summary, the proposed motor interaction control model using the muscle force model and deep reinforcement strategy has higher motion fidelity and can realize autonomous decision making and adaptive control in the face of complex environments. It can provide a theoretical reference for improving the effect of motion control and realizing intelligent motion interaction.

The Relationship between Perceived Organizational Support, Work Engagement, Organizational Citizenship Behavior, and Customer Orientation in the Public Sports Organizations Context.

As sports activities have recently become socio-culturally important in South Korea, the roles and functions of public sports organizations are attracting attention. In this situation, perceived organizational support is considered one of the significant variables to explain the attitudes and behaviors of employees within the organizations. Hence, the purpose of this study is to investigate the relationship between perceived organizational support of public sports organizations, work engagement, organizational citizenship behavior, and customer orientation and examine the mediating effect of work engagement. This study collected data from 248 employees working for public sports organizations, and data were analyzed with SPSS 26.0 and AMOS 26.0. The results showed the following. (1) Perceived organizational support has a significant positive effect on work engagement but does not affect organizational citizenship behavior and customer orientation. (2) Work engagement significantly positively affects organizational citizenship behavior and customer orientation. (3) Work engagement has been shown to fully mediate the relationship between perceived organizational support, organizational citizenship behavior, and customer orientation. This study suggests that public sports organizations need an efficient support strategy that can maximize employees' work engagement. For example, organizations should increase their sense of unity with employees and understand the importance of their work to strengthen perceived organizational support. Lastly, organizations need to create an environment where employees can devote themselves to and focus on their work.

Assessing heatwave effects on disabled persons in South Korea.

This study investigated the risk of heatwaves for people with disabilities and other socioeconomic attributes using Health Care Bigdata in South Korea. The Health Care Bigdata provides detailed information on heat-related illness (HRI) patients in 2011-2020 from seven major cities. We employed the Distributed Lag Nonlinear Model (DLNM) to measure heat waves' relative risk. Our findings are four-fold. First, the relative risk (RR) of disabled people was 5.075 (95% confidence interval 4.476-5.674), significantly surpassing that of non-disabled people, 3.296 (2.517-4.075). Second, among various personal characteristics studied, disability influenced RR the most, exceeding impacts from elderly (4.457: 3.748-5.166), low-income (3.909: 3.004-4.813), and outdoor (4.052: 2.940-5.164). Third, the disabled young group (5.305: 4.414-6.195) was more vulnerable than the non-disabled elderly group (4.287: 3.576-4.999). Lastly, no significant difference in relative risk was observed between the mild (4.413: 3.855-4.971) and severe disabled groups (4.013: 3.121-4.905).

Stress Effect in the Knee Joint Based on the Fibular Osteotomy Level and Varus Deformity: A Finite Element Analysis Study.

Proximal fibular osteotomy (PFO) was found to relieve pain and improve knee function in patients with medial compartment knee osteoarthritis (OA). Therapy redistributes the load applied from the inside to the outside and alleviates the load applied on the inside through fibula osteotomy. Therefore, the clinical effect of fibular osteotomy using the finite element (FE) method was evaluated to calculate the exact change in stress inside a knee joint with varus deformity. Using CT and MRI images of a patient's lower extremities, 3D models of the bone, cartilage, meniscus, and ligaments were constructed. The varus angle, representing the inward angulation of the knee, was increased by applying a force ratio in the medial and lateral directions. The results showed that performing proximal fibular osteotomy led to a significant reduction in stress in the medial direction of the meniscus and cartilage. The stress reduction in the lateral direction was relatively minor. In conclusion, the study demonstrated that proximal fibular osteotomy effectively relieves stress and redistributes the load in the knee joints of patients with medial compartment knee osteoarthritis. The findings emphasize the importance of considering force distribution and the position of fibular osteotomy to achieve optimal clinical outcomes.

Ultra-low-crosstalk multicore fiber-integrated pump-signal combiner for a core-pumped EDFA.

Fiber-integrated, submersible-qualified, core-pumped, multicore EDFAs are indispensable for space-division-multiplexing envisioned for the next generation of submarine communication lines. Here we demonstrate a fully packaged, 63-dB counter-propagating crosstalk, and 70-dB-return-loss four-core pump-signal-combiner. This enables core-pumping of a four-core EDFA.

Ultra-dense, 1152-core, broadband multicore fiber link deployed in a metro network.

We have designed, developed, and deployed the world's first ultra-dense space division-multiplexing multicore fiber link in a conduit of a metro network. In a 10-mm-diameter fiber optic-cable, 288 4-core multicore fibers are arranged in 24 200-µm spiderweb collapsible ribbons. The multicore fibers are fusion-spliced to 576 fanout devices which provide conventional single-core interfaces at patch panels at both ends of the link.

Impact of COVID-19 infection on sports performance of elite university athletes.

BACKGROUND: Cardiopulmonary functions of athletes can be affected by the Coronavirus disease 2019 (COVID-19). This study aimed to investigate athletes' pattern of returning to sports after COVID-19, their experience of COVID-19-associated symptoms, and the disturbance in sports performance caused by the symptoms. METHODS: Elite university athletes who were infected with COVID-19 in 2022 were recruited for the survey and the data for 226 respondents were analyzed. Information about COVID-19 infection and the degree of disturbance in ordinary training and competition was collected. Their returning pattern to sports, the prevalence of COVID-19 symptoms, the degree of disturbance in sports by related symptoms, and factors associated with disturbance in sports and fatigue were analyzed. RESULTS: Results showed that 53.5% of the analyzed athletes returned to ordinary training immediately after quarantine, while 61.5% experienced disturbance in ordinary training, and 30.9% experienced that in competition. Most prevalent COVID-19 symptoms were lack of energy, easy fatiguability and cough. Disturbance in ordinary training and competition were mainly related to generalized, cardiologic, and respiratory symptoms. Women and those with severe and generalized symptoms had significantly higher odds of experiencing disturbance in training. Those with cognitive symptoms had higher odds of being "fatigue case." CONCLUSIONS: More than half of the athletes returned immediately to sports after the legal quarantine period of COVID-19 infection and experienced disturbance in ordinary training by related symptoms. Prevalent COVID-19 symptoms and the associated factors causing disturbance in sports and fatigue case were also revealed. This study will be helpful to establish the safe return guidelines essential for athletes after COVID-19.

Analysis of time-dependent effects of ambient temperatures on health by vulnerable groups in Korea in 1999-2018.

This study compared the relative risks of heat days on mortalities by vulnerable groups (elderly, single-person households, less-educated) in the past decade (1999-2008) and the recent decade (2009-2018) in four cities, Seoul, Incheon, Daegu, and Gwangju, in Korea. It has been known that the health impacts of heatwaves have gradually decreased over time due to socio-economic development, climate adaptation, and acclimatization. Contrary to general perception, we found that the recent relative risk of mortality caused by heat days has increased among vulnerable groups. It may associate with recent increasing trends of severe heat days due to climate change. The increasing relative risk was more significant in single-person households and less-educated groups than in the elderly. It implies that the impacts of climate change-induced severe heat days have been and will be concentrated on vulnerable groups. It suggests that social polarization and social isolation should be addressed to reduce heatwave impacts. Furthermore, this study shows the necessity of customized heatwave policies, which consider the characteristics of vulnerable groups.

Development of a human-friendly visual inspection method for painted vehicle bodies.

Visual inspections performed in the final stage of the vehicle manufacturing process are crucial for assuring the quality of painted vehicle bodies. However, lengthy visual inspections can cause fatigue and discomfort of the eyes, which may adversely affect inspection accuracy and efficiency. This study developed a new human-friendly visual inspection method for the detection of defects (e.g., scar and dent) on vehicle bodies, and compared its performance to a conventional inspection method in terms of critical fusion frequency (Hz, indirect measure of eye fatigue), defect detectability (%), and subjective satisfaction score (7-point Likert scale). The new method was devised to project bright-dark linear stripes onto the surface of the vehicle body and created emergent features (distorted stripes) where a defect existed. The critical fusion frequency of the new method decreased slightly (3.7%) after a 30-minute visual inspection task, whereas that of the conventional method dropped substantially (11.0%), which implied more severe eye fatigue. Additionally, the new method had significantly higher defect detectability (92.1%) and satisfaction score (5.8 points) than those (73.4% and 3.5 points) of the conventional method.

Usefulness of hand grip strength to estimate other physical fitness parameters in older adults.

This study aimed to reveal the status of physical fitness (PF) levels and determine whether hand grip strength (HGS) could be used to estimate other PF parameters in older adults from large population data. A total of 46,269 participants aged ≥ 65 years who participated in the 2019 National Fitness Award Project in South Korea were included in the analysis. Of the participants, 6.8% had the highest level of overall physical fitness, while 48.9% had the lowest level. The proportion of overall PF levels differed significantly according to age groups. Significant associations between HGS and other PF parameters (30-s chair stand test, 2-min or 6-min walk test, sit-and-reach test, 3-m backwards walk test, and Figure-of-8 walk test) were noted and the group with low HGS (< 28 kg for men and < 18 kg for women) had significantly higher odds of having the lowest level of overall PF (odds ratio: 5.232 in men and 6.351 in women), after adjusting for age and body mass index. HGS could estimate muscular strength and endurance, aerobic fitness, flexibility, balance skills, and coordination skills, as well as overall PF level in older adults, and could be used as a substitute test for their PF level in limited situations.

The short-term effectiveness of scapular focused taping on scapular movement in tennis players with shoulder pain: A within-subject comparison.

This study aimed to investigate the short-term effectiveness of scapular focused taping (SFT) on scapular position and kinematics during the tennis serve among professional players with and without shoulder pain. The cohort included 7 players who had no history of non-shoulder pain (NSP) and 6 players with shoulder pain (SP). All participants performed tennis flat serves while the Qualisys motion capture system recorded three-dimensional scapular kinematic data according to the International Society of Biomechanics recommendations. SFT was applied to the participants' torso aligned with the lower trapezius, and the same movements were repeated. In the SP group, the scapula was tilted more posteriorly after the application of SFT as compared to before at ball release and maximally externally rotated humerothoracic joint during tennis serve (t = -5.081, P = .004 and t = -2.623, P = .047, respectively). In the NSP group, the scapula was tilted more posteriorly with SFT as compared to without at first 75% timing of the cocking phase and maximally externally rotated humerothoracic joint (t = -3.733, P = .010 and t = -2.510, P = .046, respectively). And the SP group exhibited a more rotated scapula externally after the application of SFT as compared to before at Ball impact (t = 5.283, P = .003). SFT had a positive immediate effect on the scapular posterior tilting and external rotation during certain phases of the tennis serve among tennis athletes with and without shoulder pain. These findings may help clinicians and sports practitioners to prevent and rehabilitate shoulder injuries for overhead athletes. Level of evidence: Level III; Case-Control Design; Comparative Study.

Shape suitability and mechanical safety of customised hip implants: Three-dimensional printed acetabular cup for hip arthroplasty.

Background: Owing to an increase in the number of hip arthroplasty surgeries, the number of implant replacement surgeries is increasing rapidly as well. This necessitates the study of hip joint conditions. Therefore, Paprosky defined a classification system to indicate the degree of damage to the hip joint. In this study, a customised hip implant suitable for Paprosky classification Type ⅡC and over was designed. The shape, suitability, and mechanical safety of the worst-case model for the implant were evaluated. Materials and methods: To identify the implant size depending on states over Type ⅡC acetabulum bone loss, a size range was selected and a customised implant was designed according to the computed tomography data within the size range. The implant was designed for the flange, hook, and flattened model types. The worst-case selection test was conducted using finite element analysis. The von Mises stresses of the flange, hook, and flattened models were found as 76.223, 136.99, and 80.791 MPa, respectively. Therefore, the hook-type model was selected as the worst case for the mechanical performance test. Results: A bending test was conducted on the hook-type model without fracture and failure at 5344.56 N. The proposed customised implant was found suitable for Type ⅢA acetabulum bone loss, whereas the shape suitability and mechanical safety were verified for the worst case. Conclusion: The shape of a customised implant suitable for Paprosky ⅢA type was designed. The shape suitability and mechanical safety were evaluated using finite element method analysis and bending tests. Clinical validation is required through subsequent clinical evaluation.

Preconditioning process for dermal tissue decellularization using electroporation with sonication.

Decellularization to produce bioscaffolds composed of the extracellular matrix (ECM) uses enzymatic, chemical and physical methods to remove antigens and cellular components from tissues. Effective decellularization methods depend on the characteristics of tissues, and in particular, tissues with dense, complex structure and abundant lipid content are difficult to completely decellularize. Our study enables future research on the development of methods and treatments for fabricating bioscaffolds via decellularization of complex and rigid skin tissues, which are not commonly considered for decellularization to date as their structural and functional characteristics could not be preserved after severe decellularization. In this study, decellularization of human dermal tissue was done by a combination of both chemical (0.05% trypsin-EDTA, 2% SDS and 1% Triton X-100) and physical methods (electroporation and sonication). After decellularization, the content of DNA remaining in the tissue was quantitatively confirmed, and the structural change of the tissue and the retention and distribution of ECM components were evaluated through histological and histochemical analysis, respectively. Conditions of the chemical pretreatment that increase the efficiency of physical stimulation as well as decellularization, and conditions for electroporation and sonication without the use of detergents, unlike the methods performed in previous studies, were established to enable the complete decellularization of the skin tissue. The combinatorial decellularization treatment formed micropores in the lipid bilayers of the skin tissues while removing all cell and cellular residues without affecting the ECM properties. Therefore, this procedure can be widely used to fabricate bioscaffolds by decellularizing biological tissues with dense and complex structures.

Evaluating the validity of lightweight talar replacement designs: rational models and topologically optimized models.

BACKGROUND: Total talar replacement is normally stable and satisfactory. We studied a rational scaffold talus model for each size range created through topology optimization (TO) and comparatively evaluated a topologically optimized scaffold bone talus model using a finite element analysis (FEA). We hypothesized that the rational scaffold would be more effective for application to the actual model than the topologically optimized scaffold. METHODS: Size specification for the rational model was performed via TO and inner scaffold simplification. The load condition for worst-case selection reflected the peak point according to the ground reaction force tendency, and the load directions "plantar 10°" (P10), "dorsi 5°" (D5), and "dorsi 10°" (D10) were applied to select worst-case scenarios among the P10, D5, and D10 positions (total nine ranges) of respective size specifications. FEA was performed on each representative specification-standard model, reflecting a load of 5340 N. Among the small bone models selected as the worst-case, an arbitrary size was selected, and the validity of the standard model was evaluated. The standard model was applied to the rational structure during validity evaluation, and the TO model reflecting the internal structure derived by the TO of the arbitrary model was implemented. RESULT: In worst-case selection, the highest peak von Mises stress (PVMS) was calculated from the minimum D5 model (532.11 MPa). Thereafter, FEA revealed peak von Mises stress levels of 218.01 MPa and 565.35 MPa in the rational and topologically optimized models, respectively, confirming that the rational model yielded lower peak von Mises stress. The weight of the minimum model was reduced from 1106 g to 965.4 g after weight reduction through rational scaffold application. CONCLUSION: The rational inner-scaffold-design method is safer than topologically optimized scaffold design, and three types of rational scaffold, according to each size range, confirmed that all sizes of the talus within the anatomical dimension could be covered, which was a valid result in the total talar replacement design. Accordingly, we conclude that an implant design meeting the clinical design requirements, including patient customization, weight reduction, and mechanical stability, should be possible by applying a rational inner scaffold without performing TO design. The scaffold model weight was lower than that of the solid model, and the safety was also verified through FEA.

Pulsed Electrical Stimulation Enhances Consistency of Directional Migration of Adipose-Derived Stem Cells.

Electrical stimulation is a well-known strategy for regulating cell behavior, both in pathological and physiological processes such as wound healing, tissue regeneration, and embryonic development. Electrotaxis is the directional migration of cells toward the cathode or anode when subjected to electrical stimulation. In this study, we investigated the conditions for enhanced directional migration of electrically stimulated adipose-derived stem cells (ADSCs) during prolonged culture, using a customized agar-salt electrotaxis chamber. Exposure of ADSCs to a 1200 µA electric current for 3 h, followed by cessation of stimulation for 6 h and resumed stimulation for a further 3 h, increased directional cell migration toward the anode without inducing cell death. Moreover, Golgi polarization maintained the direction of polarity parallel to the direction of cell movement. Herein, we demonstrated that a pulsed electric current is sufficient to trigger directional migration of ADSCs in long-term culture while maintaining cell viability.

Optimal relative workload for managing low-injury risk in lower extremities of female field hockey players: A retrospective observational study.

ABSTRACT: Our study aimed to investigate the relative workload that is related to the injury in lower extremities of female field hockey players and to identify the optimal ratio of acute to chronic workloads (ACWR) depending on the playing position to manage low risk of sports-related injuries.Data were collected using a global positioning systems unit on a full-time basis and during competition among 52 players who were enrolled in Korea National Team. The ACWR was calculated by dividing the most recent 1 week workload by the prior 4 weeks workload. Injury risk was calculated for each category from very low to very high based on a z-score.In striker and midfielder, the injury risk was the lowest in the moderate-low category of total distance covered, meters per minute (MpM), repeated high-intensity effort bouts, and acceleration bouts, and the moderate-high category of high-intensity running distance (HID). The injury risk of a defender was the lowest in the moderate-low category of HID and MpM.The ACWR in total distance covered, MpM, repeated high-intensity effort bouts, and acceleration bouts should stay within the moderate-low category in striker and midfielder positions and HID and MpM in defender positions in order to manage low-risk of non-contact and soft tissue injuries in female field hockey players.

Tonsil-derived mesenchymal stem cells incorporated in reactive oxygen species-releasing hydrogel promote bone formation by increasing the translocation of cell surface GRP78.

Controlling the senescence of mesenchymal stem cells (MSCs) is essential for improving the efficacy of MSC-based therapies. Here, a model of MSC senescence was established by replicative subculture in tonsil-derived MSCs (TMSCs) using senescence-associated ß-galactosidase, telomere-length related genes, stemness, and mitochondrial metabolism. Using transcriptomic and proteomic analyses, we identified glucose-regulated protein 78 (GRP78) as a unique MSC senescence marker. With increasing cell passage number, GRP78 gradually translocated from the cell surface and cytosol to the (peri)nuclear region of TMSCs. A gelatin-based hydrogel releasing a sustained, low level of reactive oxygen species (ROS-hydrogel) was used to improve TMSC quiescence and self-renewal. TMSCs expressing cell surface-specific GRP78 (csGRP78+), collected by magnetic sorting, showed better stem cell function and higher mitochondrial metabolism than unsorted cells. Implantation of csGRP78+ cells embedded in ROS-hydrogel in rats with calvarial defects resulted in increased bone regeneration. Thus, csGRP78 is a promising biomarker of senescent TMSCs, and the combined use of csGRP78+ cells and ROS-hydrogel improved the regenerative capacity of TMSCs by regulating GRP78 translocation.

A collagen-AS/εPLL bilayered artificial substitute regulates anti-inflammation and infection for initial inflamed wound healing.

Despite the development of advanced tissue engineering substitutes, inflammation is still a significant problem that can arise from inflamed burn injuries, chronic wounds, or microbial diseases. Although topical wound dressing accelerates healing by minimizing or preventing the consequences of skin inflammation, there remains a need for the development of a novel substitute scaffold that can effectively eliminate immoderate inflammation and infection in the initial phase of the healing meachanism. In this study, an artificial skin substitute scaffold fabricated with asiaticoside (AS) and epsilon-poly-L-lysine (εPLL) was prepared. Upon the release of these bioactive compounds, they accelerate wound healing and inhibit any bacterial infection at the wound site. We determined whether AS and εPLL exhibit anti-inflammatory and bactericidal effects through different mechanisms. Collectively, the collagen-AS/εPLL artificial skin substitute could be a significant therapeutic agent for scar-less rapid wound healing (without infection and inflammation) of initially-inflamed full-thickness wounds.

Sterilization of sealed PVDF pouches containing decellularized scaffold by electrical stimulation.

A terminal sterilization process for tissue engineering products, such as allografts and biomaterials is necessary to ensure complete removal of pathogenic microorganisms such as the bacteria, fungi, and viruses. However, it can be difficult to sterilize allografts and artificial tissue models packaged in wet conditions without deformation. In this study, we investigated the sterilization effects of electrical stimulation (ES) and assessed its suitability by evaluating sterility assurance levels in pouches at a constant current. Stability of polyvinylidene fluoride pouches was determined by a sterility test performed after exposure to five microorganisms (Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans) for 5 days; the sterility test was also performed with decellularized human dermal tissues inoculated with the five microorganisms. Sterilization using ES inactivated microorganisms both inside and outside of sealed pouches and caused no damage to the packaged tissue. Our results support the development of a novel system that involves ES sterilization for packaging of implantable biomaterials and human derived materials.

Analysis on Effectiveness of Impact Based Heatwave Warning Considering Severity and Likelihood of Health Impacts in Seoul, Korea.

Many countries are operating a heatwave warning system (HWWS) to mitigate the impact of heatwaves on human health. The level of heatwave warning is normally determined by using the threshold temperature of heat-related morbidity or mortality. However, morbidity and mortality threshold temperatures have not been used together to account for the severity of health impacts. In this study, we developed a heatwave warning system with two different warning levels: Level-1 and Level-2, by analyzing the severity and likelihood of heat-related morbidity and mortality using the generalized additive model. The study particularly focuses on the cases in Seoul, South Korea, between 2011 and 2018. The study found that the threshold temperature for heat-related morbidity and mortality are 30 °C and 33 °C, respectively. Approximately 73.1% of heat-related patients visited hospitals when temperature was between 30 °C and 33 °C. We validated the developed HWWS by using both the threshold temperatures of morbidity and mortality. The area under curves (AUCs) of the proposed model were 0.74 and 0.86 at Level-1 and Level-2, respectively. On the other hand, the AUCs of the model using only the mortality threshold were 0.60 and 0.86 at Level-1 and Level-2, respectively. The AUCs of the model using only the morbidity threshold were 0.73 and 0.78 at Level-1 and Level-2, respectively. The results suggest that the updated HWWS can help to reduce the impact of heatwaves, particularly on vulnerable groups, by providing the customized information. This also indicates that the HWWS could effectively mitigate the risk of morbidity and mortality.