Electrochemomechanical failure in layered oxide cathodes caused by rotational stacking faults.

Electrochemomechanical degradation is one of the most common causes of capacity deterioration in high-energy-density cathodes, particularly intercalation-based layered oxides. Here we reveal the presence of rotational stacking faults (RSFs) in layered lithium transition-metal oxides, arising from specific stacking sequences at different angles, and demonstrate their critical role in determining structural/electrochemical stability. Our combined experiments and calculations show that RSFs facilitate oxygen dimerization and transition-metal migration in layered oxides, fostering microcrack nucleation/propagation concurrently with cumulative electrochemomechanical degradation on cycling. We further show that thermal defect annihilation as a potential solution can suppress RSFs, reducing microcracks and enhancing cyclability in lithium-rich layered cathodes. The common but previously overlooked occurrence of RSFs suggests a new synthesis guideline of high-energy-density layered oxide cathodes.

Design of a trigonal halide superionic conductor by regulating cation order-disorder.

Lithium-metal-halides have emerged as a class of solid electrolytes that can deliver superionic conductivity comparable to that of state-of-the-art sulfide electrolytes, as well as electrochemical stability that is suitable for high-voltage (>4 volt) operations. We show that the superionic conduction in a trigonal halide, such as Li3MCl6 [where metal (M) is Y or Er], is governed by the in-plane lithium percolation paths and stacking interlayer distance. These two factors are inversely correlated with each other by the partial occupancy of M, serving as both a diffusion inhibitor and pillar for maintaining interlayer distance. These findings suggest that a critical range or ordering of M exists in trigonal halides, and we showcase the achievement of high ionic conductivity by adjusting the simple M ratio (per Cl or Li). We provide general design criteria for superionic trigonal halide electrolytes.

Concurrent oxygen reduction and water oxidation at high ionic strength for scalable electrosynthesis of hydrogen peroxide.

Electrosynthesis of hydrogen peroxide via selective two-electron transfer oxygen reduction or water oxidation reactions offers a cleaner, cost-effective alternative to anthraquinone processes. However, it remains a challenge to achieve high Faradaic efficiencies at elevated current densities. Herein, we report that oxygen-deficient Pr1.0Sr1.0Fe0.75Zn0.25O4-δ perovskite oxides rich of oxygen vacancies can favorably bind the reaction intermediates to facilitate selective and efficient two-electron transfer pathways. These oxides exhibited superior Faradic efficiencies (~99%) for oxygen reduction over a wide potential range (0.05 to 0.45 V versus reversible hydrogen electrode) and current densities surpassing 50 mA cm-2 under high ionic strengths. We further found that the oxides perform a high selectivity (~80%) for two-electron transfer water oxidation reaction at a low overpotential (0.39 V). Lastly, we devised a membrane-free electrolyser employing bifunctional electrocatalysts, achieving a record-high Faradaic efficiency of 163.0% at 2.10 V and 50 mA cm-2. This marks the first report of the concurrent oxygen reduction and water oxidation catalysed by efficient bifunctional oxides in a novel membrane-free electrolyser for scalable hydrogen peroxide electrosynthesis.

Slab gliding, a hidden factor that induces irreversibility and redox asymmetry of lithium-rich layered oxide cathodes.

Lithium-rich layered oxides, despite their potential as high-energy-density cathode materials, are impeded by electrochemical performance deterioration upon anionic redox. Although this deterioration is believed to primarily result from structural disordering, our understanding of how it is triggered and/or occurs remains incomplete. Herein, we propose a theoretical picture that clarifies the irreversible transformation and redox asymmetry of lithium-rich layered oxides by introducing a series of global and local dynamic structural evolution processes involving slab gliding and transition-metal migration. We show that slab gliding plays a key role in trigger/initiating the structural disordering and consequent degradation of the anionic redox reaction. We further reveal that the 'concerted disordering mechanism' of slab gliding and transition-metal migration produces spontaneously irreversible/asymmetric lithiation and de-lithiation pathways, causing irreversible structural deterioration and the asymmetry of the anionic redox reaction. Our findings suggest slab gliding as a crucial, yet underexplored, method for achieving a reversible anionic redox reaction.

Antiphase Boundaries as Faceted Metallic Wires in 2D Transition Metal Dichalcogenides.

Antiphase boundaries (APBs) in 2D transition metal dichalcogenides have attracted wide interest as 1D metallic wires embedded in a semiconducting matrix, which could be exploited in fully 2D-integrated circuits. Here, the anisotropic morphologies of APBs (i.e., linear and saw-toothed APBs) in the nanoscale are investigated. The experimental and computational results show that despite their anisotropic nanoscale morphologies, all APBs adopt a predominantly chalcogen-oriented dense structure to maintain the energetically most stable atomic configuration. Moreover, the effect of the nanoscale morphology of an APB on electron transport from two-probe field effect transistor measurements is investigated. A saw-toothed APB has a considerably lower electron mobility than a linear APB, indicating that kinks between facets are the main factors of scattering. The observations contribute to the systematical understanding of the faceted APBs and its impact on electrical transport behavior and it could potentially extend the applications of 2D materials through defect engineering to achieve the desired properties.

Phase Engineering of Transition Metal Dichalcogenides with Unprecedentedly High Phase Purity, Stability, and Scalability via Molten-Metal-Assisted Intercalation.

The crystalline phase of layered transition metal dichalcogenides (TMDs) directly determines their material property. The most thermodynamically stable phase structures in TMDs are the semiconducting 2H and metastable metallic 1T phases. To overcome the low phase purity and instability of 1T-TMDs, which limits the utilization of their intrinsic properties, various synthesis strategies for 1T-TMDs have been proposed in phase-engineering studies. Herein, a facile and scalable synthesis of 1T-phase molybdenum disulfide (MoS2 ) via the molten-metal-assisted intercalation (MMI) approach is introduced, which exploits the capillary action of molten potassium and the difference between the electron affinity of MoS2 and the ionization potential of potassium. Highly reactive molten potassium metal can readily intercalate into the MoS2 interlayers, inducing an efficient phase transition from the 2H to 1T crystal structure. The ionic bonding between the intercalated potassium and sulfur lowers the energy barrier of the 1T-phase transition, enhancing the phase stability of the 1T crystals. Owing to the high purity and stability of the 1T phase, the electrocatalytic performance for the hydrogen evolution reaction is significantly higher in 1T-MoS2 (MMI) than in 2H-MoS2 and even in 1T-MoS2 synthesized using n-butyllithium.

Perovskite Granular Wire Photodetectors with Ultrahigh Photodetectivity.

Control over the morphology and crystallinity of metal halide perovskite materials is of key importance to enable high-performance optoelectronics. Here, a simple yet effective template-free self-assembly synthesis of perovskite granular wires with ultrahigh photodetectivity (3.17 × 1015 Jones) is reported. The 1D self-assembly of perovskite grains is driven by differences in the surface interaction energies of the granular facets. The superb photodetecting performance originates from extremely low dark current engendered by energetic barriers featuring unique band-edge modulation along the long axis of wire. Flexible photodetector arrays, fabricated by selectively placing perovskite granular wires onto pre-patterned electrode arrays on a transparent polymer substrate, show independently addressable photonic signal mapping with remarkably high detectivity, photoconductive gain, and responsivity. The "self-assembled nanograin engineering" strategy developed in this study provides a viable method for the development of high-performance perovskite photodetectors and can be extended to other integrated optoelectronic systems.

The Electromagnetic Absorption of a Na-Ethylenediamine Graphite Intercalation Compound.

A sodium-ethylenediamine graphite intercalation compound (Na(ethylenediamine)C15: "GIC") made from graphite flakes was used to study the microwave absorption performance of a GIC for the first time. Compared with the pristine graphite flakes, the neighboring layers in this GIC are pillared by Na(ethylenediamine)+ and possess a larger layer distance and improved electrical conductivity. Owing to the electrical conductivity of this GIC, only half of the loading content, compared to graphite flakes, is needed to achieve an outstanding absorption of -75.6 dB at 9.25 GHz (10.0 wt % GIC in paraffin in a 4.0 mm thick sample), but for graphite, 20.0 wt % is required for an absorption of -37.6 dB.

Atomically dispersed Pt-N4 sites as efficient and selective electrocatalysts for the chlorine evolution reaction.

Chlorine evolution reaction (CER) is a critical anode reaction in chlor-alkali electrolysis. Although precious metal-based mixed metal oxides (MMOs) have been widely used as CER catalysts, they suffer from the concomitant generation of oxygen during the CER. Herein, we demonstrate that atomically dispersed Pt-N4 sites doped on a carbon nanotube (Pt1/CNT) can catalyse the CER with excellent activity and selectivity. The Pt1/CNT catalyst shows superior CER activity to a Pt nanoparticle-based catalyst and a commercial Ru/Ir-based MMO catalyst. Notably, Pt1/CNT exhibits near 100% CER selectivity even in acidic media, with low Cl- concentrations (0.1 M), as well as in neutral media, whereas the MMO catalyst shows substantially lower CER selectivity. In situ electrochemical X-ray absorption spectroscopy reveals the direct adsorption of Cl- on Pt-N4 sites during the CER. Density functional theory calculations suggest the PtN4C12 site as the most plausible active site structure for the CER.

Chemically induced transformation of chemical vapour deposition grown bilayer graphene into fluorinated single-layer diamond.

Notwithstanding the numerous density functional studies on the chemically induced transformation of multilayer graphene into a diamond-like film carried out to date, a comprehensive convincing experimental proof of such a conversion is still lacking. We show that the fluorination of graphene sheets in Bernal (AB)-stacked bilayer graphene grown by chemical vapour deposition on a single-crystal CuNi(111) surface triggers the formation of interlayer carbon-carbon bonds, resulting in a fluorinated diamond monolayer ('F-diamane'). Induced by fluorine chemisorption, the phase transition from (AB)-stacked bilayer graphene to single-layer diamond was studied and verified by X-ray photoelectron, UV photoelectron, Raman, UV-Vis and electron energy loss spectroscopies, transmission electron microscopy and density functional theory calculations.

A Ternary Ni46 Co40 Fe14 Nanoalloy-Based Oxygen Electrocatalyst for Highly Efficient Rechargeable Zinc-Air Batteries.

Replacing noble-metal-based oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts is the key to developing efficient Zn-air batteries (ZABs). Here, a homogeneous ternary Ni46 Co40 Fe14 nanoalloy with a size distribution of 30-60 nm dispersed in a carbon matrix (denoted as C@NCF-900) as a highly efficient bifunctional electrocatalyst produced via supercritical reaction and subsequent heat treatment at 900 °C is reported. Among all the transition-metal-based electrocatalysts, the C@NCF-900 exhibits the highest ORR performance in terms of half-wave potential (0.93 V) in 0.1 m KOH. Moreover, C@NCF-900 exhibits negligible activity decay after 10 000 voltage cycles with minor reduction (0.006 V). In ZABs, C@NCF-900 outperforms the mixture of Pt/C 20 wt% and IrO2 , cycled over 100 h under 58% depth of discharge condition. Furthermore, density functional theory (DFT) calculations and in situ X-ray absorption spectroscopy strongly support the active sites and site-selective reaction as a plausible ORR/OER mechanism of C@NCF-900.

Molecular Viscosity Sensors with Two Rotators for Optimizing the Fluorescence Intensity-Contrast Trade-Off.

A series of fluorescent molecular rotors obtained by introducing two rotational groups ("rotators"), which exhibit different rotational and electron-donating abilities, are discussed. Whereas the control molecular rotor, PH, includes a single rotator (the widely used phenyl group), the PO molecular rotors consist of two rotators (a phenyl group and an alkoxy group), which exhibit simultaneous strongly electron-donating and easy rotational abilities. Compared with the control rotor PH, PO molecular rotors exhibited one order of magnitude higher quantum yield (fluorescence intensity) and simultaneously exhibited significantly higher fluorescence contrast. These properties are directly related to the strong electron-donating ability and low energy barrier of rotation of the alkoxy group, as confirmed by dynamic fluorescence experiments and quantum chemical calculations. The PO molecular rotors exhibited two fluorescence relaxation pathways, whereas the PH molecular rotor exhibited a single fluorescence relaxation pathway. Cellular fluorescence imaging with PO molecular rotors for mapping cellular viscosity was successfully demonstrated.

Wafer-Scale and Wrinkle-Free Epitaxial Growth of Single-Orientated Multilayer Hexagonal Boron Nitride on Sapphire.

Large-scale growth of high-quality hexagonal boron nitride has been a challenge in two-dimensional-material-based electronics. Herein, we present wafer-scale and wrinkle-free epitaxial growth of multilayer hexagonal boron nitride on a sapphire substrate by using high-temperature and low-pressure chemical vapor deposition. Microscopic and spectroscopic investigations and theoretical calculations reveal that synthesized hexagonal boron nitride has a single rotational orientation with AA' stacking order. A facile method for transferring hexagonal boron nitride onto other target substrates was developed, which provides the opportunity for using hexagonal boron nitride as a substrate in practical electronic circuits. A graphene field effect transistor fabricated on our hexagonal boron nitride sheets shows clear quantum oscillation and highly improved carrier mobility because the ultraflatness of the hexagonal boron nitride surface can reduce the substrate-induced degradation of the carrier mobility of two-dimensional materials.

Direct exfoliation and dispersion of two-dimensional materials in pure water via temperature control.

The high-volume synthesis of two-dimensional (2D) materials in the form of platelets is desirable for various applications. While water is considered an ideal dispersion medium, due to its abundance and low cost, the hydrophobicity of platelet surfaces has prohibited its widespread use. Here we exfoliate 2D materials directly in pure water without using any chemicals or surfactants. In order to exfoliate and disperse the materials in water, we elevate the temperature of the sonication bath, and introduce energy via the dissipation of sonic waves. Storage stability greater than one month is achieved through the maintenance of high temperatures, and through atomic and molecular level simulations, we further discover that good solubility in water is maintained due to the presence of platelet surface charges as a result of edge functionalization or intrinsic polarity. Finally, we demonstrate inkjet printing on hard and flexible substrates as a potential application of water-dispersed 2D materials.

The Jak2 small molecule inhibitor, G6, reduces the tumorigenic potential of T98G glioblastoma cells in vitro and in vivo.

Glioblastoma multiforme (GBM) is the most common and the most aggressive form of primary brain tumor. Jak2 is a non-receptor tyrosine kinase that is involved in proliferative signaling through its association with various cell surface receptors. Hyperactive Jak2 signaling has been implicated in numerous hematological disorders as well as in various solid tumors including GBM. Our lab has developed a Jak2 small molecule inhibitor known as G6. It exhibits potent efficacy in vitro and in several in vivo models of Jak2-mediated hematological disease. Here, we hypothesized that G6 would inhibit the pathogenic growth of GBM cells expressing hyperactive Jak2. To test this, we screened several GBM cell lines and found that T98G cells express readily detectable levels of active Jak2. We found that G6 treatment of these cells reduced the phosphorylation of Jak2 and STAT3, in a dose-dependent manner. In addition, G6 treatment reduced the migratory potential, invasive potential, clonogenic growth potential, and overall viability of these cells. The effect of G6 was due to its direct suppression of Jak2 function and not via off-target kinases, as these effects were recapitulated in T98G cells that received Jak2 specific shRNA. G6 also significantly increased the levels of caspase-dependent apoptosis in T98G cells, when compared to cells that were treated with vehicle control. Lastly, when T98G cells were injected into nude mice, G6 treatment significantly reduced tumor volume and this was concomitant with significantly decreased levels of phospho-Jak2 and phospho-STAT3 within the tumors themselves. Furthermore, tumors harvested from mice that received G6 had significantly less vimentin protein levels when compared to tumors from mice that received vehicle control solution. Overall, these combined in vitro and in vivo results indicate that G6 may be a viable therapeutic option against GBM exhibiting hyperactivation of Jak2.

Elevated levels of mast cells are involved in pruritus associated with polycythemia vera in JAK2V617F transgenic mice.

Pruritus occurs frequently in patients with polycythemia vera (PV), and the pathophysiology of PV-associated pruritus is unclear. We have previously demonstrated that transgenic mice expressing JAK2V617F displayed clear PV-like phenotypes. In the current study, we found frequent occurrence of pruritus with aged JAK2V617F transgenic mice and further investigated the underlying mechanisms by studying mast cells, key players in allergic reactions and anaphylaxis. Massive accumulations of mast cells were observed in the skin of pruritic JAK2V617F transgenic mice. In vitro culture yielded much higher mast cell counts from the bone marrow, spleen, peripheral blood, and peritoneal cavity of JAK2V617F transgenic mice than from controls. Cultured mast cells from JAK2V617F transgenic mice exhibited enhanced proliferative signals, relative resistance to cell death upon growth factor deprivation, and a growth advantage over control cells under suboptimal growth conditions. However, these mast cells displayed normal morphology and contained normal levels of mast cell proteases before and after degranulation. Finally, the JAK2 inhibitor G6 effectively reduced mast cell numbers and alleviated pruritus in JAK2V617F transgenic mice. Collectively, these data demonstrate that mast cells are involved in PV-associated pruritogenesis and that JAK2 inhibitors are potential antipruritus drugs.

Conditional deletion of Jak2 reveals an essential role in hematopoiesis throughout mouse ontogeny: implications for Jak2 inhibition in humans.

Germline deletion of Jak2 in mice results in embryonic lethality at E12.5 due to impaired hematopoiesis. However, the role that Jak2 might play in late gestation and postnatal life is unknown. To understand this, we utilized a conditional knockout approach that allowed for the deletion of Jak2 at various stages of prenatal and postnatal life. Specifically, Jak2 was deleted beginning at either mid/late gestation (E12.5), at postnatal day 4 (PN4), or at ∼2 months of age. Deletion of Jak2 beginning at E12.5 resulted in embryonic death characterized by a lack of hematopoiesis. Deletion beginning at PN4 was also lethal due to a lack of erythropoiesis. Deletion of Jak2 in young adults was characterized by blood cytopenias, abnormal erythrocyte morphology, decreased marrow hematopoietic potential, and splenic atrophy. However, death was observed in only 20% of the mutants. Further analysis of these mice suggested that the increased survivability was due to an incomplete deletion of Jak2 and subsequent re-population of Jak2 expressing cells, as conditional deletion in mice having one floxed Jak2 allele and one null allele resulted in a more severe phenotype and subsequent death of all animals. We found that the deletion of Jak2 in the young adults had a differential effect on hematopoietic lineages; specifically, conditional Jak2 deletion in young adults severely impaired erythropoiesis and thrombopoiesis, modestly affected granulopoiesis and monocytopoiesis, and had no effect on lymphopoiesis. Interestingly, while the hematopoietic organs of these mutant animals were severely affected by the deletion of Jak2, we found that the hearts, kidneys, lungs, and brains of these same mice were histologically normal. From this, we conclude that Jak2 plays an essential and non-redundant role in hematopoiesis during both prenatal and postnatal life and this has direct implications regarding the inhibition of Jak2 in humans.

The small molecule inhibitor G6 significantly reduces bone marrow fibrosis and the mutant burden in a mouse model of Jak2-mediated myelofibrosis.

Philadelphia chromosome-negative myeloproliferative neoplasms, including polycythemia vera, essential thrombocytosis, and myelofibrosis, are disorders characterized by abnormal hematopoiesis. Among these myeloproliferative neoplasms, myelofibrosis has the most unfavorable prognosis. Furthermore, currently available therapies for myelofibrosis have little to no efficacy in the bone marrow and hence, are palliative. We recently developed a Janus kinase 2 (Jak2) small molecule inhibitor called G6 and found that it exhibits marked efficacy in a xenograft model of Jak2-V617F-mediated hyperplasia and a transgenic mouse model of Jak2-V617F-mediated polycythemia vera/essential thrombocytosis. However, its efficacy in Jak2-mediated myelofibrosis has not previously been examined. Here, we hypothesized that G6 would be efficacious in Jak2-V617F-mediated myelofibrosis. To test this, mice expressing the human Jak2-V617F cDNA under the control of the vav promoter were administered G6 or vehicle control solution, and efficacy was determined by measuring parameters within the peripheral blood, liver, spleen, and bone marrow. We found that G6 significantly reduced extramedullary hematopoiesis in the liver and splenomegaly. In the bone marrow, G6 significantly reduced pathogenic Jak/STAT signaling by 53%, megakaryocytic hyperplasia by 70%, and the Jak2 mutant burden by 68%. Furthermore, G6 significantly improved the myeloid to erythroid ratio and significantly reversed the myelofibrosis. Collectively, these results indicate that G6 is efficacious in Jak2-V617F-mediated myelofibrosis, and given its bone marrow efficacy, it may alter the natural history of this disease.

Identification of novel SAR properties of the Jak2 small molecule inhibitor G6: significance of the para-hydroxyl orientation.

In this study, we analyzed the structure-activity relationship properties of the small molecule Jak2 inhibitor G6. We synthesized a set of derivatives containing the native para-hydroxyl structure or an alternative meta-hydroxyl structure and examined their Jak2 inhibitory properties. We found that the para-hydroxyl derivative known as NB15 had excellent Jak2 inhibitory properties in silico, in vitro, and ex vivo when compared with meta-hydroxyl derivatives. These results indicate that NB15 is a potent derivative of the Jak2 inhibitor G6, and that maintaining the para-hydroxyl orientation of G6 is critical for its Jak2 inhibitory potential.

A46, a benzothiophene-derived compound, suppresses Jak2-mediated pathologic cell growth.

Hyperkinetic Jak2 tyrosine kinase signaling has been implicated in several hematological disorders, including myeloproliferative neoplasms. Effective Jak2 inhibitors can have significant therapeutic potential. Here, using structure-based virtual screening, we identified a benzothiophene-derived Jak2 inhibitor named A46. We hypothesized that this compound would inhibit Jak2-V617F-mediated pathologic cell growth. To test this, A46 was analyzed for its ability to inhibit recombinant Jak2 protein catalysis; suppress Jak2-mediated pathogenic cell growth in vitro; inhibit the aberrant ex vivo growth of Jak2-V617F-expressing primary human bone marrow cells; and inhibit Jak2-mediated pathogenesis in vivo. To this end, we found that A46 selectively inhibited Jak2-V617F protein when compared to wild-type Jak2 protein. The drug also selectively inhibited the proliferation of Jak2-V617F-expressing cells in both a time- and dose-dependent manner, and this correlated with decreased Jak2 and signal transducers and activators of transcription 5 phosphorylation within treated cells. The Jak2-V617F cell growth inhibition correlated with an induction of cell cycle arrest and promotion of apoptosis. A46 also inhibited the pathologic growth of primary Jak2-V617F-expressing bone marrow cells ex vivo. Lastly, using a mouse model of Jak2-V617F-mediated myeloproliferative neoplasia. A46 significantly reduced the splenomegaly and megakaryocytic hyperplasia in the spleens of treated mice and the levels of interleukin-6 in the plasma. Collectively, our data demonstrate that the benzothiophene-based compound, A46, suppresses Jak2-mediated pathogenesis, thereby making it a potential candidate drug against Jak2-mediated disorders.