Experimental and theoretical elucidation of the luminescence quenching mechanism in highly efficient Hg2+ and sulfadiazine sensing by Ln-MOF.

Heavy metal ions and antibiotic contamination have become a major environmental concern worldwide. The development of efficient recognition strategies of these pollutants at ultra-low concentrations in aqueous solutions as well as the elucidation of the intrinsic sensing mechanism are challenging tasks. In this work, unique luminescent Ln-MOF materials (NIIC-3-Ln) were assembled by rational ligand design. Among them, NIIC-3-Tb demonstrated highly selective luminescence quenching response toward Hg2+ and sulfadiazine (SDI) at subnanomolar concentrations in less than 7 s. In addition, a Hg2+ sensing mechanism through chelation was proposed on the basis of single-crystal X-ray diffraction analysis and Hg2+ adsorption study. The interaction mechanism of NIIC-3-Tb with SDI was revealed using a newly developed approach involving a (TD-)DFT based quantification of the charge transfer of a MOF-analyte supramolecular complex model in the ground and excited states. Effect of ultrasonic treatment on the surface morphology important for MOF sensing performance was revealed by gas adsorption experiments. The presented results indicate that NIIC-3-Ln is not only an advanced sensing material for the efficient detection of Hg2+ and SDI at ultra-low concentrations, but also opens up a new approach to study the sensing mechanism at the molecular level at ultra-low concentrations.

Effect of Post-Implantation Heat Treatment Conditions on Photoluminescent Properties of Ion-Synthesized Gallium Oxide Nanocrystals.

A novel and promising way for creating nanomaterials based on gallium oxide is the ion synthesis of Ga2O3 nanocrystals in a SiO2/Si dielectric matrix. The properties of nanocrystals are determined by the conditions of ion synthesis-the parameters of ion irradiation and post-implantation heat treatment. In this work, the light-emitting properties of Ga2O3 nanocrystals were studied depending on the temperature and annealing atmosphere. It was found that annealing at a temperature of 900 °C leads to the appearance of intense luminescence with a maximum at ~480 nm caused by the recombination of donor-acceptor pairs. An increase in luminescence intensity upon annealing in an oxidizing atmosphere is shown. Based on data from photoluminescence excitation spectroscopy and high-resolution transmission electron microscopy, a hypothesis about the possibility of the participation of a quantum-size effect during radiative recombination is proposed. A mechanism for the formation of Ga2O3 nanocrystals during ion synthesis is suggested, which makes it possible to describe the change in the luminescent properties of the synthesized samples with varying conditions of post-implantation heat treatment.

Carbon-Rich Plasma-Deposited Silicon Oxycarbonitride Films Derived from 4-(Trimethylsilyl)morpholine as a Novel Single-Source Precursor.

4-(trimethylsilyl)morpholine O(CH2CH2)2NSi(CH3)3 (TMSM) was investigated as a single-source precursor for SiCNO films synthesis. Optical emission spectroscopy of plasma generated from TMSM/He, TMSM/H2, and TMSM/NH3 gas mixtures revealed the presence of N2, CH, H, CN, and CO species. The last two are suggested to be responsible for the lowering of carbon concentration in the films in comparison with the precursor. The refractive index ranged from 1.5 to 2.0, and bandgap varied from 2.0 to 4.6 eV, which pointed that some of the films can be used as antireflective coatings in silicon photovoltaic cell technologies and dielectric layers in electronic devices.

Multiresponsive luminescent metal-organic framework for cooking oil adulteration detection and gallium(III) sensing.

A new 3D metal-organic framework {[Cd16(tr2btd)10(dcdps)16(H2O)3(EtOH)]∙15DMF}n (MOF 1, tr2btd = 4,7-di(1,2,4-triazol-1-yl)benzo-2,1,3-thiadiazole, H2dcdps = 4,4'-sulfonyldibenzoic acid) was obtained and its luminescent properties were studied. MOF 1 exhibited bright blue-green luminescence with a high quantum yield of 74 % and luminescence quenching response to a toxic natural polyphenol gossypol and luminescence enhancement response to some trivalent metal cations (Fe3+, Cr3+, Al3+ and Ga3+). The limit of gossypol detection was 0.20 µM and the determination was not interfered by the components of the cottonseed oil. The limit of detection of gallium(III) was 1.1 µM. It was demonstrated that MOF 1 may be used for distinguishing between the genuine sunflower oil and oil adulterated by crude cottonseed oil through qualitative luminescent and quantitative visual gossypol determination.

Ln-MOF-Based Hydrogel Films with Tunable Luminescence and Afterglow Behavior for Visual Detection of Ofloxacin and Anti-Counterfeiting Applications.

Highly selective and sensitive quantitative detection of ofloxacin (OFX) at ultralow concentrations in aqueous media and development of new afterglow materials remains a challenge. Herein, a new 2D water-stable lanthanide metal-organic framework (NIIC-2-Tb) is proposed, which exhibits high selectivity towards OFX through the luminescence quenching with the lowest detection limit (1.1 × 10-9 M) reported to date and a fast response within 6 s. In addition, the luminescent detection of OFX by NIIC-2-Tb is not affected by typical components of blood plasma and urine. The excellent sensing effect of NIIC-2-Tb is further utilized to prepare a composite functional sensing carrageenan hydrogel material for the rapid detection of OFX in meat in real time and the first discovery of impressive afterglow in MOF-based hydrogels. This study not only presents novel Ln-MOF materials and Ln-MOF-based hydrogel films for luminescent sensing of OFX, but also demonstrates color-tunable luminescent films with afterglow, which expands the application of composite luminescent materials for detection and anti-counterfeiting.

Synthesis of Novel Phosphorus-Containing Derivatives of 1,3,4-Trimethylglycoluril via the Birum-Oleksyszyn Reaction.

This work presents the synthesis of a new compound, 1-[aryl-(diphenylphosphono)methyl]-3,4,6-trimethylglycolurils, via the interaction of benzaldehyde and its mononitro- and monohydroxyderivatives with 1,3,4-trimethylglycoluril and triphenylphosphite. By varying the reaction conditions and the catalysts, the obtained product yields ranged from satisfactory to good. The diastereomers formed during the reaction were separated by semipreparative HPLC on the C18 stationary phase. The isolated diastereomers were characterized by 1H, 13C, and 31P NMR, and the structures of the diastereomers were confirmed using a single-crystal X-ray crystal structure analysis and quantum chemical calculations.

Exfoliation of 2D Metal-Organic Frameworks: toward Advanced Scalable Materials for Optical Sensing.

Two-dimensional metal-organic frameworks (MOFs) occupy a special place among the large family of functional 2D materials. Even at a monolayer level, 2D MOFs exhibit unique sensing, separation, catalytic, electronic, and conductive properties due to the combination of porosity and organo-inorganic nature. However, lab-to-fab transfer for 2D MOF layers faces the challenge of their scalability, limited by weak interactions between the organic and inorganic building blocks. Here, comparing three top-down approaches to fabricate 2D MOF layers (sonication, freeze-thaw, and mechanical exfoliation), The technological criteria have established for creation of the layers of the thickness up to 1 nm with a record aspect ratio up to 2*10^4:1. The freezing-thaw and mechanical exfoliation are the most optimal approaches; wherein the rate and manufacturability of the mechanical exfoliation rivaling the greatest scalability of 2D MOF layers obtained by freezing-thaw (21300:1 vs 1330:1 aspect ratio), leaving the sonication approach behind (with a record 900:1 aspect ratio) have discovered. The high quality 2D MOF layers with a record aspect ratio demonstrate unique optical sensitivity to solvents of a varied polarity, which opens the way to fabricate scalable and freestanding 2D MOF-based atomically thin chemo-optical sensors by industry-oriented approach.

Laser-Assisted Design of MOF-Derivative Platforms from Nano- to Centimeter Scales for Photonic and Catalytic Applications.

Laser conversion of metal-organic frameworks (MOFs) has recently emerged as a fast and low-energy consumptive approach to create scalable MOF derivatives for catalysis, energy, and optics. However, due to the virtually unlimited MOF structures and tunable laser parameters, the results of their interaction are unpredictable and poorly controlled. Here, we experimentally base a general approach to create nano- to centimeter-scale MOF derivatives with the desired nonlinear optical and catalytic properties. Five three- and two-dimensional MOFs, differing in chemical composition, topology, and thermal resistance, have been selected as precursors. Tuning the laser parameters (i.e., pulse duration from fs to ns and repetition rate from kHz to MHz), we switch between ultrafast nonthermal destruction and thermal decomposition of MOFs. We have established that regardless of the chemical composition and MOF topology, the tuning of the laser parameters allows obtaining a series of structurally different derivatives, and the transition from femtosecond to nanosecond laser regimes ensures the scaling of the derivatives from nano- to centimeter scales. Herein, the thermal resistance of MOFs affects the structure and chemical composition of the resulting derivatives. Finally, we outline the "laser parameters versus MOF structure" space, in which one can create the desired and scalable platforms with nonlinear optical properties from photoluminescence to light control and enhanced catalytic activity.

Electrical Characteristics of CMOS-Compatible SiOx-Based Resistive-Switching Devices.

The electrical characteristics and resistive switching properties of memristive devices have been studied in a wide temperature range. The insulator and electrode materials of these devices (silicon oxide and titanium nitride, respectively) are fully compatible with conventional complementary metal-oxide-semiconductor (CMOS) fabrication processes. Silicon oxide is also obtained through the low-temperature chemical vapor deposition method. It is revealed that the as-fabricated devices do not require electroforming but their resistance state cannot be stored before thermal treatment. After the thermal treatment, the devices exhibit bipolar-type resistive switching with synaptic behavior. The conduction mechanisms in the device stack are associated with the effect of traps in the insulator, which form filaments in the places where the electric field is concentrated. The filaments shortcut the capacitance of the stack to different degrees in the high-resistance state (HRS) and in the low-resistance state (LRS). As a result, the electron transport possesses an activation nature with relatively low values of activation energy in an HRS. On the contrary, Ohm's law and tunneling are observed in an LRS. CMOS-compatible materials and low-temperature fabrication techniques enable the easy integration of the studied resistive-switching devices with traditional analog-digital circuits to implement new-generation hardware neuromorphic systems.

Experimental and Computational Investigation of the Oxime Bond Stereochemistry in c-Jun N-terminal Kinase 3 Inhibitors 11H-Indeno[1,2-b]quinoxalin-11-one Oxime and Tryptanthrin-6-oxime.

11H-Indeno[1,2-b]quinoxalin-11-one oxime (IQ-1) and tryptanthrin-6-oxime are potent c-Jun N-terminal kinase 3 (JNK-3) inhibitors demonstrating neuroprotective, anti-inflammatory and anti-arthritic activity. However, the stereochemical configuration of the oxime carbon-nitrogen double bond (E- or Z-) in these compounds was so far unknown. In this contribution, we report the results of the determination of the double bond configuration in the solid state by single crystal X-ray diffraction and in solution by 1D and 2D NMR techniques and DFT calculations. It was found that both in the solid state and in solution, IQ-1 adopts the E-configuration stabilized by intermolecular hydrogen bonds, in contrast to previously assumed Z-configuration that could be stabilized only by an intramolecular hydrogen bond.

Highly Luminescent Lanthanide Metal-Organic Frameworks with Tunable Color for Nanomolar Detection of Iron(III), Ofloxacin and Gossypol and Anti-counterfeiting Applications.

Solvothermal reaction of 5,5'-(pyridine-2,6-diylbis(oxy))diisophthalic acid (H4 L) with europium(III) or terbium(III) nitrates in acetonitrile-water (1 : 1) at 120 °C gave rise to isostructural 2D coordination polymers, [Ln(HL)(H2 O)3 ]∞ (NIIC-1-Eu and NIIC-1-Tb), the layers of which are composed by eight-coordinated lanthanide(III) ions interconnected by triply deprotonated ligands HL3- . The layers are packed in the crystal without any specific intermolecular interactions between them, allowing the facile preparation of stable water suspensions, in which NIIC-1-Tb exhibited top-performing sensing properties through luminescence quenching effect with exceptionally low detection limits towards Fe3+ (LOD 8.62 nM), ofloxacin (OFX) antibiotic (LOD 3.91 nM) and cotton phytotoxicant gossypol (LOD 2.27 nM). In addition to low detection limit and high selectivity, NIIC-1-Tb features fast sensing response (within 60-90 seconds), making it superior to other MOF-based sensors for metal cations and organic toxicants. The photoluminescence quantum yield of NIIC-1-Tb was 93 %, one of the highest among lanthanide MOFs. Mixed-metal coordination polymers NIIC-1-Eux Tb1-x demonstrated efficient photoluminescence, the color of which could be modulated by the excitation wavelength and time delay for emission monitoring (within 1 millisecond). Furthermore, an original 2D QR-coding scheme was designed for anti-counterfeiting labeling of goods based on unique and tunable emission spectra of NIIC-1-Ln coordination polymers.

Structure and Chemical Composition of Ion-Synthesized Gallium Oxide Nanocrystals in Dielectric Matrices.

The ion-beam synthesis of Ga2O3 nanocrystals in dielectric matrices on silicon is a novel and promising way for creating nanomaterials based on gallium oxide. This research studies the regularities of changes, depending on the synthesis regimes used, in the chemical composition of ion-implanted SiO2/Si and Al2O3/Si samples. It has been shown that the formation of Ga-O chemical bonds occurs even in the absence of thermal annealing. We also found the conditions of ion irradiation and annealing at which the content of oxidized gallium in the stochiometric state of Ga2O3 exceeds 90%. For this structure, the formation of Ga2O3 nanocrystalline inclusions was confirmed by transmission electron microscopy.

Femtosecond Laser-Printed Gold Nanoantennas for Electrically Driven and Bias-Tuned Nanoscale Light Sources Operating in Visible and Infrared Spectral Ranges.

Nanoscale electrically driven light-emitting sources with tunable wavelength represent a milestone for implementation of integrated optoelectronic chips. Plasmonic nanoantennas exhibiting an enhanced local density of optical states (LDOS) and strong Purcell effect hold promise for fabrication of bright nanoscale light emitters. Here, we justify gold parabola-shaped nanobumps and their ordered arrays produced by direct ablation-free femtosecond laser printing as broadband plasmonic light sources electrically excited by a probe of scanning tunneling microscope (STM). I-V curves of the probe-nanoantenna tunnel junction reveal characteristic bias voltages correlating with visible-range localized (0.55 and 0.85 µm) and near-IR (1.65 and 1.87 µm) collective plasmonic modes of these nanoantennas. These multiband resonances confirmed by optical spectroscopy and full-wave simulations provide enhanced LDOS for efficient electrically driven and bias-tuned light emission. Additionally, our studies confirm remarkable applicability of STM for accurate study of optical modes supported by the plasmonic nanoantennas at nanoscale spatial resolution.

Karyotypes and COI Gene Sequences of Chironomus sp. Le1 (Kiknadze and Salova, 1996), Ch. laetus (Belyanina and Filinkova, 1996) and Their Hybrid from the Yamal Peninsula, Arctic Zone of Russia.

The study of the biological diversity of the Arctic zone yields intriguing results. Initial research on the lakes of the Yamal Peninsula resulted in the identification of Chironomus laetus and the hybrid Ch. laetus × Ch. sp. Le1. To avoid misidentification, we used morphological, cytogenetic, and molecular genetic approaches. By cytogenetics, in Ch. sp. Le1, seven banding sequences were found: Le1A1, Le1B1, Le1C1, Le1D1, Le1E1, Le1F1, and Le1G1. The karyotype of Ch. laetus was mapped for the first time; it is the first species with the arm combinations AE BC DF G. We propose the name of a new cytocomplex-"laetus". DNA-barcoding of the COI gene was carried out for Ch. laetus and Ch. laetus × Ch. sp. Le1 for the first time. The estimated genetic distance between the sequences of Ch. laetus and Ch. riihimakiensis is 2.3-2.5%. The high similarity in morphology, banding sequences, and the possibility of hybridization indicate a close relationship between Ch. laetus and Ch. sp. Le1, which is assumed to be the northern variant of Ch. riihimakiensis. Molecular genetic data suggests the presence of a subgroup with Ch. laetus.

Variable Dimensionality of Europium(III) and Terbium(III) Coordination Compounds with a Flexible Hexacarboxylate Ligand.

A reaction between 4,4',4″-(benzene-1,3,5-triyltris(oxy))triphthalic acid (H6L) and lanthanide(III) nitrates (Ln = Eu3+, Tb3+) in water under the same conditions gave a molecular coordination compound [Tb(H4.5L)2(H2O)5]∙6H2O in the case of terbium(III) and a one-dimensional linear coordination polymer {[Eu2(H3L)2(H2O)6]∙8H2O}n in the case of europium(III). The crystal structures of both compounds were established by single-crystal X-ray diffraction, and they were further characterized by powder X-ray diffraction, thermogravimetric analysis and infrared spectroscopy. The compounds demonstrated characteristic lanthanide-centered photoluminescence. The lanthanide-dependent dimensionality of the synthesized compounds, which are the first examples of the coordination compounds of hexacarboxylic acid H6L demonstrates its potential as a linker for new coordination polymers.

Ion-Beam Synthesis of Gallium Oxide Nanocrystals in a SiO2/Si Dielectric Matrix.

A new method for creating nanomaterials based on gallium oxide by ion-beam synthesis of nanocrystals of this compound in a SiO2/Si dielectric matrix has been proposed. The influence of the order of irradiation with ions of phase-forming elements (gallium and oxygen) on the chemical composition of implanted layers is reported. The separation of gallium profiles in the elemental and oxidized states is shown, even in the absence of post-implantation annealing. As a result of annealing, blue photoluminescence, associated with the recombination of donor-acceptor pairs (DAP) in Ga2O3 nanocrystals, appears in the spectrum. The structural characterization by transmission electron microscopy confirms the formation of ß-Ga2O3 nanocrystals. The obtained results open up the possibility of using nanocrystalline gallium oxide inclusions in traditional CMOS technology.

Goldfish as a model for studying the effect of hypernatremia on blood plasma lipoproteins.

AIM: To evaluate the effect of hypernatremia on the organization of blood plasma high density lipoproteins (HDL) in goldfish; to compare the state of hypernatremia in fish and humans; to assess the possible risks and consequences of the effect of hypernatremia on human plasma lipoproteins. METHODS: The fish were acclimated for 20 days at a critical salinity of 11.5 g/L; after that the salt water was gradually "desalinated". The concentration of Na+ and the content of total water were determined in tissues, cells, and body fluids. The HDL organization was assessed by the number of apolipoprotein molecules per particle. The methods of flame spectrophotometry, electrophoresis and MALDI were used. RESULTS: In fresh water, the state of normonatremia was maintained in the fish body; at critical water salinity, the state of hypernatremia. Against the background of hypernatremia, the initial signs of muscle and erythrocyte dehydration appeared in fish, the total water content in the plasma did not change, and HDL disintegrated into small particles, which, upon restoration of normonatremia, were combined into the original large forms. CONCLUSION: In goldfish at the state of normonatremia, large forms of HDL are stable while at the state of hypernatremia, the small forms of HDL are stable. Under conditions of a hypertonic environment and plasma hypernatremia, the breakdown of HDL prevents the loss of water from the fish organism and reduces the threat of their dehydration. Human hypernatremia is characterized by plasma sodium levels comparable to that in goldfish, however accompanied by life-threatening metabolic changes. The results of this study may be useful for assessing the risks of HDL breakdown at hypernatremia and for the development of protocols for the treatment of pathological conditions in humans (Fig. 4, Ref. 45).

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3.

A luminescent coordination polymer with the overall formula {[Zn(tr2btd)(bpdc)]∙DMF}n (where tr2btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr2btd)(bpdc)]∙DMF}n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al3+ solution. Fluorescence titration experiments were carried out and the detection limit for Al3+ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr2btd)(bpdc)]∙DMF}n is a promising probe for sensitive fluorescent Al3+ detection.

Oxidative cross-coupling of secondary phosphine chalcogenides with amino alcohols and aminophenols: aspects of the reaction chemoselectivity.

Secondary phosphine chalcogenides react with primary amino alcohols under mild conditions (room temperature, molar ratio of the initial reagents 1 : 1) in a CCl4/Et3N oxidizing system to chemoselectively deliver amides of chalcogenophosphinic acids with free OH groups. Under similar conditions, mono-cross-coupling between secondary phosphine chalcogenides and 1,2- or 1,3-aminophenols proceeds only with the participation of phenolic hydroxyl to give aminophenylchalcogenophosphinic O-esters. The yields of the synthesized functional amides or esters are 60-85%.

Coordination Polymers Based on Highly Emissive Ligands: Synthesis and Functional Properties.

Coordination polymers are constructed from metal ions and bridging ligands, linking them into solid-state structures extending in one (1D), two (2D) or three dimensions (3D). Two- and three-dimensional coordination polymers with potential voids are often referred to as metal-organic frameworks (MOFs) or porous coordination polymers. Luminescence is an important property of coordination polymers, often playing a key role in their applications. Photophysical properties of the coordination polymers can be associated with intraligand, metal-centered, guest-centered, metal-to-ligand and ligand-to-metal electron transitions. In recent years, a rapid growth of publications devoted to luminescent or fluorescent coordination polymers can be observed. In this review the use of fluorescent ligands, namely, 4,4'-stilbenedicarboxylic acid, 1,3,4-oxadiazole, thiazole, 2,1,3-benzothiadiazole, terpyridine and carbazole derivatives, naphthalene diimides, 4,4',4''-nitrilotribenzoic acid, ruthenium(II) and iridium(III) complexes, boron-dipyrromethene (BODIPY) derivatives, porphyrins, for the construction of coordination polymers are surveyed. Applications of such coordination polymers based on their photophysical properties will be discussed. The review covers the literature published before April 2020.