Design and fabrication of bimetallic plasmonic colloids through cold nanowelding.

The integration of Au and Ag into nanoalloys has emerged as an intriguing strategy to further tailor and boost the plasmonic properties of optical substrates. Conventional approaches for fabricating these materials via chemical reductions of metal salts in solution suffer from some limitations, such as the possibility of retaining the original morphology of the monometallic substrate. Spontaneous nanowelding at room temperature has emerged as an alternative route to tailor Au/Ag nanomaterials. Herein, we perform a thorough study on the cold-welding process of silver nanoparticles onto gold substrates to gain a better understanding of the role of different variables in enabling the formation of well-defined bimetallic structures that retain the original gold substrate morphology. To this end, we systematically varied the size of silver nanoparticles, dimensions and geometries of gold substrates, solvent polarity and structural nature of the polymeric coating. A wide range of optical and microscopy techniques have been used to provide a complementary and detailed description of the nanowelding process. We believe this extensive study will provide valuable insights into the optimal design and engineering of bimetallic plasmonic Ag/Au structures for application in nanodevices.

Widefield SERS for High-Throughput Nanoparticle Screening.

Surface-enhanced Raman scattering (SERS) imaging is a powerful technology with unprecedent potential for ultrasensitive chemical analysis. Point-by-point scanning and often excessively long spectral acquisition-times hamper the broad exploitation of the full analytical potential of SERS. Here, we introduce large-scale SERS particle screening (LSSPS), a multiplexed widefield screening approach to particle characterization, which is 500-1000 times faster than typical confocal Raman implementations. Beyond its higher throughput, LSSPS simultaneously quantifies both the sample's Raman and Rayleigh scattering to directly quantify the fraction of SERS-active particles which allows for an unprecedented correlation of SERS activity with particle size. .

Silver melamine thin film as a flexible platform for SERS analysis.

New SERS detection platforms are required for the quick and easy preparation of sensing devices for food, agriculture, and environmental science. For quantitative sensing, it is important that a sensing material, in addition to efficient sensing, provides extraction and concentration of the target molecules such as toxic pesticides or healthy vitamins. We design such films adopting the Liesegang rings formation process that includes the reaction-diffusion of silver nitrate and melamine followed by the precipitation of different intermediates and their reduction by light in a pectin medium. Surprisingly, we find that the presence of melamine provides an excellent substrate for the extraction of pollutants at the solid-liquid interface giving rise to a powerful but easy and fast method for the quantification of fruits' quality. The complex silver and melamine containing films show high sensitivity even at relatively low silver concentrations.

Spontaneous and stimulated electron-photon interactions in nanoscale plasmonic near fields.

The interplay between free electrons, light, and matter offers unique prospects for space, time, and energy resolved optical material characterization, structured light generation, and quantum information processing. Here, we study the nanoscale features of spontaneous and stimulated electron-photon interactions mediated by localized surface plasmon resonances at the tips of a gold nanostar using electron energy-loss spectroscopy (EELS), cathodoluminescence spectroscopy (CL), and photon-induced near-field electron microscopy (PINEM). Supported by numerical electromagnetic boundary-element method (BEM) calculations, we show that the different coupling mechanisms probed by EELS, CL, and PINEM feature the same spatial dependence on the electric field distribution of the tip modes. However, the electron-photon interaction strength is found to vary with the incident electron velocity, as determined by the spatial Fourier transform of the electric near-field component parallel to the electron trajectory. For the tightly confined plasmonic tip resonances, our calculations suggest an optimum coupling velocity at electron energies as low as a few keV. Our results are discussed in the context of more complex geometries supporting multiple modes with spatial and spectral overlap. We provide fundamental insights into spontaneous and stimulated electron-light-matter interactions with key implications for research on (quantum) coherent optical phenomena at the nanoscale.

Gold-spiked coating of silver particles through cold nanowelding.

Herein, we present a method to obtain particles composed of a segregated alloy of silver coated with gold. These particles are achieved through the controlled Ostwald ripening of small gold nanoparticles (NPs) on the surfaces of larger silver particles. The prepared segregated nanoalloyed colloids benefit from the advantages of gold and silver with none of their drawbacks. These platforms provide optical efficiencies which are superior to those of silver with the chemical resistance and biocompatibility of gold.

Positively-charged plasmonic nanostructures for SERS sensing applications.

Surface-enhanced Raman (SERS) spectroscopy has been establishing itself as an ultrasensitive analytical technique with a cross-disciplinary range of applications, which scientific growth is triggered by the continuous improvement in the design of advanced plasmonic materials with enhanced multifunctional abilities and tailorable surface chemistry. In this regard, conventional synthetic procedures yield negatively-charged plasmonic materials which can hamper the adhesion of negatively-charged species. To tackle this issue, metallic surfaces have been modified via diverse procedures with a broad array of surface ligands to impart positive charges. Cationic amines have been preferred because of their ability to retain a positive zeta potential even at alkaline pH as well as due to their wide accessibility in terms of structural features and cost. In this review, we will describe and discuss the different approaches for generating positively-charged plasmonic platforms and their applications in SERS sensing.

Fabrication of Plasmonic Supercrystals and Their SERS Enhancing Properties.

Supercrystals, made of ordered plasmonic nanoparticles (NPs) in close contact, turn out as efficient SERS substrates. However, the production of highly homogeneous structures implies precise control over a multitude of parameters including quality of the building blocks, solvent evaporation rate, and surface chemistry interactions. To pursue this goal, different approaches using templates to self-assembly NPs have been developed in recent years. Here, we review the most common procedures employing two different substrates, planar and patterned templates. Several approaches and strategies are described showing the optical properties of the resulted supercrystals and their behavior as SERS substrates.

Surface-enhanced Raman scattering holography.

Nanometric probes based on surface-enhanced Raman scattering (SERS) are promising candidates for all-optical environmental, biological and technological sensing applications with intrinsic quantitative molecular specificity. However, the effectiveness of SERS probes depends on a delicate trade-off between particle size, stability and brightness that has so far hindered their wide application in SERS imaging methodologies. In this Article, we introduce holographic Raman microscopy, which allows single-shot three-dimensional single-particle localization. We validate our approach by simultaneously performing Fourier transform Raman spectroscopy of individual SERS nanoparticles and Raman holography, using shearing interferometry to extract both the phase and the amplitude of wide-field Raman images and ultimately localize and track single SERS nanoparticles inside living cells in three dimensions. Our results represent a step towards multiplexed single-shot three-dimensional concentration mapping in many different scenarios, including live cell and tissue interrogation and complex anti-counterfeiting applications.

Fabrication and SERS properties of complex and organized nanoparticle plasmonic clusters stable in solution.

SERS activity can be increased by the formation of hot spots at the interparticle junctions of plasmonic nanoparticles in very close proximity, dramatically improving the enhancement factors in comparison with isolated nanoparticles. Controlling the number and geometrical architecture of hot spots, while endowing the clusters with colloidal stability, results in feasible optical sensors, able to provide quantitative SERS responses. Here, we review the approaches proposed to date to produce colloidal stable clusters, focusing on the control of the coordination number of nanoparticle assemblies and interparticle gaps. Clusters of spherical nanoparticles of the same size and rods of the same size are described to subsequently outline core-satellite constructs of nanoparticles of different sizes. Besides, purification processes for nanoparticle clusters are revised to provide efficient production in high yields.

Fabrication of Hybrid Silver Microstructures from Vermiculite Templates as SERS Substrates.

There is great interest in developing complex, 3D plasmonic materials with unusual structural properties. This can be achieved via template-assisted approaches exploiting scaffold elements to engineer unique plasmonic substrates, which would be otherwise impossible to synthesize. Herein, we present a novel, simple, and low-cost template-assisted method for producing interconnected 3-D silver microstructures by utilizing vermiculite, a well-known silicate, as both in-situ reductant and template for silver growth. The silicate network of the vermiculite can be easily removed by dissolution with hydrofluoric acid, which, simultaneously, leads to the formation of a magnesium fluoride skeleton supporting a plasmonically active silver film. Optical, morphological, and chemical properties of the materials were extensively investigated, revealing, for example, that hybrid silver microstructures can be exploited as valuable SERS substrates over a broad spectral range of excitation wavelengths.

Nanoparticle-based mobile biosensors for the rapid detection of sepsis biomarkers in whole blood.

Detecting small variations in the levels of IL-6 is crucial for the early diagnosis of sepsis. To be useful in clinical decision-making, this requires detecting IL-6 rapidly in whole blood and with portable readers. Here we introduce immunosensors made of filter paper that use plasmonic nanoprobes to detect IL-6 rapidly in unprocessed blood with an unmodified smartphone. Key aspects of the biosensor fabrication were optimized in order to reduce the assay time without losing sensitivity. This included testing three bioconjugation routes for protein attachment to nanoprobes using gold nanoparticles covered with carboxylate or amine moieties, or polyvinylpyrrolidone (PVP), as starting materials, and using alternating layers of polyelectrolytes to bind the capture antibody to the paper substrate. Smartphone-based signal quantification was achieved with a custom-made app featuring a unique augmented reality guidance system that circumvents the need for smartphone attachments and automates all the steps involved in color quantification. The biosensors were able to detect IL-6 with a limit of detection of 0.1 pg mL-1 and a total assay time within 17 min. They could also detect an increase in IL-6 of only 12.5 pg mL-1 over basal levels in whole blood with 99% confidence. The high sensitivity and rapid turnaround time afforded by the optimized biosensors and the fully automated real-time densitometry app make our biosensors well suited for emergency healthcare situations such as the identification of potential sepsis cases.

Boosting the analytical properties of gold nanostars by single particle confinement into yolk porous silica shells.

Herein we illustrate an effective protocol to boost the optical enhancing properties of gold nanostars. By coating single nanostars with a mesoporous silica layer of the appropriate size (yolk capsules), to localize them under optical microscopy, it is possible to enumerate single particles and design SERS quantitative methods with minute amounts of metallic particles.

Three-Dimensional Surface-Enhanced Raman Scattering Platforms: Large-Scale Plasmonic Hotspots for New Applications in Sensing, Microreaction, and Data Storage.

Surface-enhanced Raman scattering (SERS) is a molecular-specific spectroscopic technique that provides up to 1010-fold enhancement of signature Raman fingerprints using nanometer-scale 0D to 2D platforms. Over the past decades, 3D SERS platforms with additional plasmonic materials in the z-axis have been fabricated at sub-micrometer to centimeter scale, achieving higher hotspot density in all x, y, and z spatial directions and higher tolerance to laser misalignment. Moreover, the flexibility to construct platforms in arbitrary sizes and 3D shapes creates attractive applications besides traditional SERS sensing. In this Account, we introduce our library of substrate-based and substrate-less 3D plasmonic platforms, with an emphasis on their non-sensing applications as microlaboratories and data storage labels. We aim to provide a scientific synopsis on these high-potential yet currently overlooked applications of SERS and ignite new scientific discoveries and technology development in 3D SERS platforms to tackle real-world issues. One highlight of our substrate-based SERS platforms is multilayered platforms built from micrometer-thick assemblies of plasmonic particles, which can achieve up to 1011 enhancement factor. As an alternative, constructing 3D hotspots on non-plasmonic supports significantly reduces waste of plasmonic materials while allowing high flexibility in structural design. We then introduce our emerging substrate-less plasmonic capsules including liquid marbles and colloidosomes, which we further incorporate the latter within an aerosol to form centimeter-scale SERS-active plasmonic cloud, the world's largest 3D SERS platform to date. We then discuss the various emerging applications arising only from these 3D platforms, in the fields of sensing, microreactions, and data storage. An important novel sensing application is the stand-off detection of airborne analytes that are several meters away, made feasible with aerosolized plasmonic clouds. We also describe plasmonic capsules as excellent miniature lab-in-droplets that can simultaneously provide in situ monitoring at the molecular level during reaction, owing to their ultrasensitive 3D plasmonic shells. We highlight the emergence of 3D SERS-based data storage platforms with 10-100-fold higher storage density than 2D platforms, featuring a new approach in the development of level 3 security (L3S) anti-counterfeiting labels. Ultimately, we recognize that 3D SERS research can only be developed further when its sensing capabilities are concurrently strengthened. With this vision, we foresee the creation of highly applicable 3D SERS platforms that excel in both sensing and non-sensing areas, providing modern solutions in the ongoing Fourth Industrial Revolution.

Extraordinarily transparent compact metallic metamaterials.

The design of achromatic optical components requires materials with high transparency and low dispersion. We show that although metals are highly opaque, densely packed arrays of metallic nanoparticles can be more transparent to infrared radiation than dielectrics such as germanium, even when the arrays are over 75% metal by volume. Such arrays form effective dielectrics that are virtually dispersion-free over ultra-broadband ranges of wavelengths from microns up to millimeters or more. Furthermore, the local refractive indices may be tuned by altering the size, shape, and spacing of the nanoparticles, allowing the design of gradient-index lenses that guide and focus light on the microscale. The electric field is also strongly concentrated in the gaps between the metallic nanoparticles, and the simultaneous focusing and squeezing of the electric field produces strong 'doubly-enhanced' hotspots which could boost measurements made using infrared spectroscopy and other non-linear processes over a broad range of frequencies.

Modular assembly of plasmonic core-satellite structures as highly brilliant SERS-encoded nanoparticles.

Herein, we present a fabrication approach that produces homogeneous core-satellite SERS encoded particles with minimal interparticle gaps (<2-3 nm) and maximum particle loading, while positioning the encoding agents at the gaps. Integration of plasmonic building blocks of different sizes, shapes, compositions, surface chemistries or encoding agents is achieved in a modular fashion with minimal modification of the general synthetic protocol. These materials present an outstanding optical performance with homogeneous enhancement factors over 4 orders of magnitude as compared with classical SERS encoded particles, which allows their use as single particle labels.

Surface Modifications of Nanoparticles for Stability in Biological Fluids.

Due to the high surface: volume ratio and the extraordinary properties arising from the nanoscale (optical, electric, magnetic, etc.), nanoparticles (NPs) are excellent candidates for multiple applications. In this context, nanoscience is opening a wide range of modern technologies in biological and biomedical fields, among others. However, one of the main drawbacks that still delays its fast evolution and effectiveness is related to the behavior of nanomaterials in the presence of biological fluids. Unfortunately, biological fluids are characterized by high ionic strengths which usually induce NP aggregation. Besides this problem, the high content in biomacromolecules—such as lipids, sugars, nucleic acids and, especially, proteins—also affects NP stability and its viability for some applications due to, for example, the formation of the protein corona around the NPs. Here, we will review the most common strategies to achieve stable NPs dispersions in high ionic strength fluids and, also, antifouling strategies to avoid the protein adsorption.

Silver-Assisted Synthesis of Gold Nanorods: the Relation between Silver Additive and Iodide Impurities.

Seed-mediated methods employing cetyltrimethylammonium bromide (CTAB) as a surfactant, and silver salts as additives, are the most common synthetic strategies for high-yield productions of quality Au nanorods. However, the mechanism of these reactions is not yet fully understood and, importantly, significant lab-to-lab reproducibility issues still affect these protocols. In this study, the direct correlation between the hidden content of iodide impurities in CTAB reagents, which can drastically differ from different suppliers or batches, and the optimal concentration of silver required to maximize the nanorods yield is demonstrated. As a result, high-quality nanorods are obtained at different iodide contents. These results are interpreted based on the different concentrations of CTAB and cetyltrimethylammonium iodide (CTAI) complexes with Ag+ and Au+ metal ions in the growth solution, and their different binding affinity and reduction potential on distinct crystallographic planes. Notably, the exhaustive conversion of CTAI-Au+ to CTAI-Ag+ appears to be the key condition for maximizing the nanorod yield.

Plasmon Tunability of Gold Nanostars at the Tip Apexes.

Herein, we present an optimized bottom-up approach to fabricate homogeneous Au nanostars with plasmon resonances fully tunable between the red and the infrared. The synthetic method relies on the kinetic control of the reaction upon optimization of the reactant concentrations (i.e., gold seeds, reducing agent, and gold salt). Optical enhancing properties of the obtained materials are demonstrated by using SERS with visible and infrared lasers.

Smelling, Seeing, Tasting-Old Senses for New Sensing.

The senses are the physiological mechanisms of perception that enable an organism to interact with the surrounding media. For centuries, humans have utilized these senses in science; vision and olfaction have been used the most extensively in laboratories followed by gustation and somatosensation, whereas audition has only rarely been employed. Most of these applications of senses were developed spontaneously based on the natural behavior of the chemistry of the reactants producing changes in scent, taste, or color. In recent years, by exploiting the outstanding properties of nanoparticles, many groups have demonstrated alternative sensing scenarios where the detection limits are remarkably improved, enabling the recognition of hazardous substances by mere sight, smell, or taste. Such alternative sensing approaches can be divided into two main groups: (i) methods that identify a single analyte by engineering a reaction that promotes a change in color or the generation of a characteristic scent, and (ii) methods that emulate or even improve mammalian senses, especially those related to taste and smell. In this Perspective, we discuss the context of each technology, present prominent examples, and evaluate the complexities, potential pitfalls, and opportunities presented by different re-engineering strategies.

Surface-Enhanced Raman Scattering Surface Selection Rules for the Proteomic Liquid Biopsy in Real Samples: Efficient Detection of the Oncoprotein c-MYC.

Blood-based biomarkers (liquid biopsy) offer extremely valuable tools for the noninvasive diagnosis and monitoring of tumors. The protein c-MYC, a transcription factor that has been shown to be deregulated in up to 70% of human cancers, can be used as a robust proteomic signature for cancer. Herein, we developed a rapid, highly specific, and sensitive surface-enhanced Raman scattering (SERS) assay for the quantification of c-MYC in real blood samples. The sensing scheme relies on the use of specifically designed hybrid plasmonic materials and their bioderivatization with a selective peptidic receptor modified with a SERS transducer. Peptide/c-MYC recognition events translate into measurable alterations of the SERS spectra associated with a molecular reorientation of the transducer, in agreement with the surface selection rules. The efficiency of the sensor is demonstrated in cellular lines, healthy donors and a cancer patient.