Telessaúde no Brasil: uma revisão de escopo / Telehealth in Brazil: a scoping review / Telesalud en Brasil: una revisión de alcance

Este artigo buscou conhecer o desenvolvimento da telessaúde no Brasil, desde a sua efetivação e ampliação a partir das publicações científicas sobre o tema pela implementação do Programa Nacional de Telessaúde Brasil Redes em 2007. Esta é uma revisão de escopo de estudos indexados nas bases Medical Literature Analysis and Retrieval System Online (Medline), Literatura Latino-Americana e do Caribe em Ciências da Saúde (Lilacs) e Scientific Electronic Library Online (SciELO) de 2007 a 2022 que abordaram ações de telessaúde. Incluíram-se 177 estudos, publicados majoritariamente nos anos de 2021 e 2020. Ações de telessaúde foram realizadas especialmente nas regiões Sudeste e Sul, sendo o telediagnóstico e teleconsultoria as mais realizadas. A medicina foi a área em que as ações de telessaúde foram mais frequentes (54,80%), focadas principalmente na saúde em geral e na cardiologia (38,42% e 19,21% respectivamente). Conclui-se que a telessaúde no Brasil tem avançado, especialmente após a pandemia da covid-19, que deflagrou a necessidade da ampliação desses serviços. As regiões Sudeste e Sul têm ofertado o maior número de serviços, sendo o telediagnóstico e a teleconsultoria os mais frequentes, especialmente na atenção primária.

This scoping review discusses the development of telehealth in Brazil from its implementation by the Brasil Redes National Telehealth Program in 2007 and expansion based on scientific publications on the topic indexed on the Medical Literature Analysis and Retrieval System Online (Medline), Latin American and Caribbean Health Sciences Literature (Lilacs) and Scientific Electronic Library Online (SciELO) from 2007 to 2022. A total of 177 studies were included, mostly published in 2021 and 2020. Telehealth actions were conducted especially in Southeastern and Southern Brazil, mostly by telediagnosis and teleconsultation. Telehealth actions were most frequent in medicine (54.80%), mainly focused on General Health and cardiology (38.42% and 19.21%, respectively). Telehealth in Brazil has advanced, especially after the COVID-19 pandemic, as it triggered the need to expand these services. Southeastern and Southern Brazil have offered the largest number of services, with telediagnosis and teleconsultation in primary care being the most frequent.

Este estudio pretendió comprender el desarrollo de la telesalud en Brasil desde la implementación y expansión de publicaciones científicas sobre la implementación del Programa Nacional de Telesalud Brasil Redes en 2007. Esta es una revisión de alcance de estudios indexados en las siguientes bases de datos: Medical Literature Analysis and Retrievel System Online (Medline), Literatura Latinoamericana y del Caribe en Ciencias de la Salud (Lilacs) y Scientific Electronic Library Online (SciELO), publicados entre 2007 y 2022, que abordaron acciones de telesalud. Se incluyeron 177 estudios, en su mayoría publicados en los años 2020 y 2021. Se realizaron acciones de telesalud especialmente en las regiones Sudeste y Sur, y entre las más realizadas se destacaron el telediagnóstico y la teleconsulta. La medicina fue el área en que se concentraron las acciones de telesalud más frecuentes (54,80%), enfocadas principalmente en salud general y cardiología (38,42% y 19,21%, respectivamente). Se concluyó que hubo un avance en la telesalud en Brasil, especialmente con la pandemia del COVID-19, ya que despertó la necesidad de ampliar estos servicios. Las regiones Sudeste y Sur han ofrecido la mayor cantidad de servicios, y el telediagnóstico y la teleconsulta fueron los más frecuentes, especialmente en la atención primaria.

Effect of high irradiance and short exposure times on the depth of cure of six bulk-fill resin composites.

This study examined the effect of high irradiance and short exposure times on the depth of cure of six resin-based composites (RBCs). Bluephase PowerCure and the Valo X light-curing units (LCUs) were used to photocure bulk-fill RBCs for their recommended exposure times: Admira Fusion x-tra (AFX/20s), Aura Bulk Fill (ABF/20s), Filtek One Bulk Fill (FOB/20s), Opus Bulk Fill APS (OBF/30s), Tetric EvoCeram Bulk Fill (TEC/10s) and Tetric PowerFill (TPF/10s). In addition, all bulk-fill RBCs were tested for depth of cure with one short 3 s exposure time from the Bluephase PowerCure or the Valo X in the Xtra Power mode. The RBCs (n = 10 per RBC) were inserted into a 4 mm diameter metal mold and covered by a polyester strip before being photocured. After 24 h of storage, uncured RBC was scraped away to determine the depth of cure of the RBCs. None of the RBCs achieved a 4 mm depth of cure. The depth of cure of TEC and TPF was unaffected by the exposure times (recommended or short) when using the Valo X. The depth of cure of AFX/20s, AFX/Xtra Power, ABF/Xtra Power, FOB/Xtra Power, and OBF/30s RBCs was greater when using Valo X compared to the Bluephase PowerCure. It was concluded that short exposure times can reduce depth of cure and should only be used for some RBCs.

Ultraviolet C as a method of disinfecting medical silicone used in facial prostheses: An in vitro study - Part 2.

STATEMENT OF PROBLEM: Disinfection is an important factor in preserving facial prostheses and maintaining tissue health. However, whether disinfection with ultraviolet C is an effective disinfection method is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effectiveness of irradiation with different exposure durations of an ultraviolet-C light-emitting diode in the disinfection of the silicone (A-588-1; Factor II) used in facial prostheses. MATERIAL AND METHODS: A total of 216 specimens were prepared, contaminated by multispecies biofilm, and divided into 9 groups (n=24) for different treatments: chlorhexidine 0.12% (G CHG), ultraviolet-C light-emitting diode for 5 minutes (G UVC5), ultraviolet-C light-emitting diode for 10 minutes (G UVC10), ultraviolet-C light-emitting diode for 20 minutes (G UVC20), their respective untreated controls (Gcontrol CHG, Gcontrol UVC5, Gcontrol UVC10, Gcontrol UVC20), and dimethyl sulfoxide (G DMSO) as the negative control. Cell viability was measured by using the methyl tetrazolium salt (MTT) method. Two statistical analyses were performed. First, a 2×3 ANOVA was carried out to compare the control groups (Gcontrol UVC5, Gcontrol UVC10, and Gcontrol UVC20) and the experimental groups of UV-C LED light with different exposure durations (G UVC5, G UVC10, and G UVC20). The second analysis was performed using generalized linear models to compare the optical density of the groups (G UVC5, G UVC10, G UVC20, G CHG, and G DMSO). RESULTS: Cell viability results demonstrated a microbial reduction after exposure to the ultraviolet-C light-emitting diode for 20 minutes (G UVC20) compared with untreated controls (P<.05). The 5- and 10-minute exposures were statistically similar to their respective control groups (P>.05). The 20 minutes exposure had the lowest average optical density value, being statistically different from the 5-minute exposure (P<.05). A 20-minute exposure to the ultraviolet-C light-emitting diode (G UVC20) was similarly effective when compared with the standard disinfection treatment (G CHG) and dimethyl sulfoxide (G DMSO) (P>.05). CONCLUSIONS: Irradiation with an ultraviolet-C light-emitting diode for 20 minutes decreased the in vitro microbial cell viability on the medical silicone used in facial prostheses.

Biomechanical and histomorphometric analysis of osseodensification drilling versus conventional technique: a systematic review and meta-analysis.

OBJECTIVES: This systematic review aimed to search the literature for the answer to the following questions. In human studies: Does the osseodensification technique increase the resonance frequency analysis given in implant stability quotient value and the insertion torque value compared to the conventional technique? In animal studies: Does the osseodensification technique increase implant stability quotient, bone-to-implant contact, and bone area fraction occupancy values over the conventional technique? DATA SOURCES: A search for studies was carried out in eight databases until August 2021. Out of the 447 publications found, 11 were included. RESULTS: In human studies, osseodensification technique showed better results for implant stability quotient values with a summarized median difference of 8.57. As for secondary stability, there was no significant difference, with summarized median difference of 4.49 in favor of the osseodensification technique. In animal studies, all results were favorable to the osseodensification technique. Regarding insertion torque, bone-to-implant contact, and bone area fraction occupancy between counterclockwise osseodensification technique vs conventional, the mean difference was 46.79 for insertion torque, 2.17 for bone-to-implant contact, and 2.11 for bone area fraction occupancy. High heterogeneity was observed between the studies. The risk of bias in humans was moderate in three studies and low in one; and in animal studies, four presented moderate risk, two low risk, and one high risk. The certainty of evidence ranged from low to moderate. CONCLUSION: The osseodensification technique showed improvement concerning the resonance frequency and the insertion torque value of implants in human studies. In addition, it increased the values of bone-to-implant contact, bone area fraction occupancy, and implant stability quotient in animal studies, when compared to the conventional technique.

Epidemiology and severity of traumatic dental injuries in permanent teeth: A 20-year retrospective study.

This study aimed to assess the traumatic dental injuries (TDIs) in permanent dentition among patients who attended at the outpatient clinic of a Brazilian dental school, during the last 20 years, and to investigate factors associated with the severity of these injuries. Clinical records of patients who attended a specialized center for dental trauma care in Brazil presenting at least one TDI in a permanent tooth, between the years 2000 and 2019, were reviewed. The data recorded were sex, age, affected arch, etiology, number, and type of the teeth affected, and classification and severity of the TDIs. The diagnosis and classification of the TDIs were based on the guidelines of the International Association of Dental Traumatology (IADT). The severity of each patient's injuries was defined as mild, moderate, or severe. Descriptive statistics, chi-square and multinomial regression analyses were used to evaluate the results. The significance level was set at 5%. A total of 837 clinical records were included, totaling 2357 teeth. Males were more prevalent than females. The patients' age ranged from 5 to 71 years. The most common traumas were avulsion (n=512) and uncomplicated enamel-dentin fracture (n=488). Univariate analyses showed that there was a statistically significant association between age group (p=0.004), etiology (p=0.000) and number of teeth affected (p=0.000) with severity of dental trauma. In conclusion, TDIs that occurred in Piracicaba and region are epidemiologically similar to those found worldwide, and that more severe injuries are related to age range, etiology and number of teeth affected.

Factors associated with the proportion of abnormal results in screening mammograms: ecological study.

OBJECTIVE: To analyze the factors associated with the proportion of abnormal results in screening mammograms. METHODS: Ecological study, with data from DATASUS/SISCAN, Atlas Brasil do Desenvolvimento Humano, Fundação SEADE, and Sistema e-Gestor, from 2016 to 2019, of women aged 50 to 69 years in the 645 municipalities of São Paulo (Brazil). Independent variables were associated with the outcome: proportion of unsatisfactory coverage of abnormal test results (Breast Imaging Reporting and Data System - BI-RADS® 0, 4 and 5 proportion >10% of tests performed). Multiple Poisson regression was used. RESULTS: Higher proportion of screening mammography (PR=1.20; 95%CI: 1.00;1.45), higher percentage of poor (PR=1.20; 95%CI: 1.07;1.36), low (PR=1.57; 95%CI: 1.38;1.78) and medium coverage of the Family Health Strategy (ESF) (PR=1.30; 95%CI: 1.09;1.52) were associated to the outcome. CONCLUSION: Socioeconomic and FHS coverage factors mediate the proportion of mammograms with abnormal results in public health services. Therefore, they are important aspects in the fight against breast cancer.

Epidemiology and severity of traumatic dental injuries in permanent teeth: A 20-year retrospective study

Abstract This study aimed to assess the traumatic dental injuries (TDIs) in permanent dentition among patients who attended at the outpatient clinic of a Brazilian dental school, during the last 20 years, and to investigate factors associated with the severity of these injuries. Clinical records of patients who attended a specialized center for dental trauma care in Brazil presenting at least one TDI in a permanent tooth, between the years 2000 and 2019, were reviewed. The data recorded were sex, age, affected arch, etiology, number, and type of the teeth affected, and classification and severity of the TDIs. The diagnosis and classification of the TDIs were based on the guidelines of the International Association of Dental Traumatology (IADT). The severity of each patient's injuries was defined as mild, moderate, or severe. Descriptive statistics, chi-square and multinomial regression analyses were used to evaluate the results. The significance level was set at 5%. A total of 837 clinical records were included, totaling 2357 teeth. Males were more prevalent than females. The patients' age ranged from 5 to 71 years. The most common traumas were avulsion (n=512) and uncomplicated enamel-dentin fracture (n=488). Univariate analyses showed that there was a statistically significant association between age group (p=0.004), etiology (p=0.000) and number of teeth affected (p=0.000) with severity of dental trauma. In conclusion, TDIs that occurred in Piracicaba and region are epidemiologically similar to those found worldwide, and that more severe injuries are related to age range, etiology and number of teeth affected.

Resumo Esse estudo objetivou avaliar as injúrias dentárias traumáticas (IDTs) na dentição permanente entre os pacientes que compareceram ao ambulatório de uma faculdade de odontologia brasileira, durante os últimos 20 anos, e investigar fatores associados à severidade dessas lesões. Os registros clínicos dos pacientes que compareceram a um centro especializado de atendimento em traumatismo dentário no Brasil apresentando pelo menos uma IDT em dente permanente, entre os anos de 2000 e 2019, foram revisados. Os dados registrados foram sexo, idade, arco dental afetado, etiologia, número e tipo dos dentes afetados, e classificação e severidade das IDTs. O diagnóstico e a classificação das IDTs foram baseados nas diretrizes da Associação Internacional de Traumatologia Dentária (AITD). A gravidade das lesões de cada paciente foi definida como leve, moderada ou severa. Estatísticas descritivas, teste qui-quadrado e análises de regressão multinomial foram usadas para avaliar os resultados. O nível de significância foi fixado em 5%. Um total de 837 registros clínicos foi incluído, totalizando 2357 dentes. O sexo masculino foi mais prevalente que o feminino. A idade dos pacientes variou de 5 a 71 anos. Os traumas mais comuns foram avulsão (n=512) e fratura não-complicada do esmalte-dentina (n=488). As análises univariadas mostraram que houve associação estatisticamente significativa entre a faixa etária (p=0,004), etiologia (p=0,000) e número de dentes afetados (p=0,000) com a gravidade do traumatismo dentário. Em conclusão, as IDTs que ocorreram em Piracicaba e região são epidemiologicamente semelhantes aos encontrados em todo o mundo, e que lesões mais graves estão relacionadas à faixa etária, etiologia e número de dentes afetados.

Interaction of different concentrations of 10-MDP and GPDM on the zirconia bonding.

OBJECTIVES: To analyze the influence of different concentrations of 10-MDP and GPDM used, combined or not, on the bonding to zirconia. METHODS: Specimens of zirconia and a resin-composite (7 mm length, 1 mm width, and 1 mm thick) were obtained. The experimental groups were obtained according to the functional monomer (10-MDP and GPDM) and the concentrations (3 %, 5 %, and 8 %). For the groups with combined 10-MDP and GPDM, the agents were used with a proportion of 50 %/50 % wt until reaching the 3 %, 5 % and 8 % concentrations. All monomers were diluted in ethanol to obtain the primers. Two control groups were established: ethanol (negative control) and a commercial reference Monobond N (positive control). The zirconia surface treatment was performed with the primer application followed by the bonding to a resin-composite sample with a light-curing resin cement. Twenty-four hours after the adhesive procedure, a microtensile test was performed and the failure pattern of each sample was analysed with a stereoscopic magnifying glass. Data were analysed by a two-way ANOVA and Dunnet test. RESULTS: All experimental primers presented a higher bond strength than the negative control (ethanol). Excepting the 8 % GPDM primer, all groups presented statistically similar bond strength compared to the positive control, with a predominance of adhesive failure. SIGNIFICANCE: 10-MDP, GPDM, and the combination of both for the concentrations tested promote an effective chemical bonding to zirconia. However, using 10-MDP and GPDM in the same primer has no synergistic effect.

Influence of alveolar bone height on the biomechanical behavior of roots restored with custom-made posts-and-cores.

OBJETIVE: This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth. MATERIALS AND METHODS: Bovine roots were endodontically treated and divided into eight groups (n = 10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.000 cycles/50 N/1.2 Hz). Compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were described as percentages. Stress distribution was analyzed by finite element analysis. RESULTS: Significant diferences were found for alveolar bone height (P < 0.0001): normal alveolar bone groups showed higher mean values of compression force resistance compared to alveolar bone loss groups, while no significant differences were found for post type (P = 0.4551), and there was no double interaction between them (P = 0.5837). Reparable fractures were more predominant in normal alveolar bone groups, especially in the milled glass fiber and PEEK post-and-core groups. Stress distribution was similar in groups with prefabricated glass fiber posts and milled PEEK posts-and-cores, and the alveolar bone loss condition significantly increased stress concentration and strain values, mainly on apical dentin. CONCLUSIONS: Alveolar bone loss due to physiological aging and/or periodontal disease may lead to increased risk of restored tooth failure, although milled glass fiber and PEEK posts-and-cores provide more reparable fractures. CLINICAL SIGNIFICANCE: Custom-made glass fiber and PEEK post-and-cores are interesting options, since they enable clinicians to work with a single-body post-and-core system that avoid several materials interfaces and fits well in the root canal provided promising results to improve the failure behavior of restored roots, as they offer more reparable fractures even in situations of alveolar bone loss.

Impact of neuroinflammation on epigenetic transcriptional control of Sonic Hedgehog members in the central nervous system.

Sonic Hedgehog (Shh) signaling plays a critical role during central nervous system (CNS) development, and its dysregulation leads to neurological disorders. Nevertheless, little is known about Shh signaling regulation in the adult brain. Here, we investigated the contribution of DNA methylation on the transcriptional control of Shh signaling pathway members and its basal distribution impact on the brain, as well as its modulation by inflammation. The methylation status of the promoter regions of these members and the transcriptional profile of DNA-modifying enzymes (DNA Methyltransferases - DNMTs and Tet Methylcytosine Dioxygenase - TETs) were investigated in a murine model of neuroinflammation by qPCR. We showed that, in the adult brain, methylation in the CpG promoter regions of the Shh signaling pathway members was critical to determine the endogenous differential transcriptional pattern observed between distinct brain regions. We also found that neuroinflammation differentially modulates gene expression of DNA-modifying enzymes. This study reveals the basal transcriptional profile of DNMTs and TETs enzymes in the CNS and demonstrates the effect of neuroinflammation on the transcriptional control of members of the Shh Signaling pathway in the adult brain.

Effects of gastric acid and mechanical toothbrushing in CAD-CAM restorative materials: Mechanical properties, surface topography, and biofilm adhesion.

OBJECTIVE: To evaluate the effects of simulated gastric acid erosion combined with mechanical toothbrushing abrasion on the mechanical properties, surface topography, and biofilm adhesion of different CAD/CAM materials. MATERIAL AND METHODS: Specimens of zirconia-reinforced lithium silicate glass-ceramic (ZLS), polymer-infiltrated ceramic network (PICN), feldspathic glass-ceramic (FE), and two nanoceramic resins (RK, RG), were submitted to the following challenges: erosion (E), abrasion (A), erosion combined with abrasion (E + A), or remained untreated (control - C). After challenges, flexural strength was evaluated, while microhardness (KHN) and surface roughness (Ra) were tested before and after treatments. The biofilm adhesion (Streptococcus mutans ATCC 700610, Streptococcus sanguinis ATCC 10556 e Candida albicans MYA 2876) was determined by the counting of colonies forming units per milliliters (UFC/mL) after erosive and abrasive challenges. RESULTS: FE showed the lowest flexural strengths, while ZLS and RG exhibited the highest, while PICN and RK, had intermediate values. PICN, ZLS, and FE showed lower microhardness after E and E + A challenges than polymer-based materials (RG and RK). FE surface roughness increased after E and E + A challenges and after A and E + A challenges for RK. Biofilm formation after erosive/abrasive challenges was higher on ZLS than FE, RK, and RG, but no different than PICN. RK and RG exhibited the lowest biofilm formation among the groups. Furthermore, E + A challenges held significant changes in the surface of the materials, which were more severe on the surface of glass ceramics and hybrid materials. CONCLUSION: Erosive challenges combined with abrasion negatively influenced the mechanical properties and surface topography of most CAD/CAM materials and increased the biofilm adhesion on ZLS. Besides, the severity of the damage is related to the type and composition of each material.

Biomechanical behavior of weakened roots restored with custom-made post-and-cores of glass fiber and polyetheretherketone.

PURPOSE: To evaluate the influence of post type and mechanical aging on compression force resistance, fracture pattern, and stress distribution in weakened roots. MATERIALS AND METHODS: Bovine roots were endodontically treated and widened-and randomly divided into 8 groups (n = 10) according to post type (prefabricated glass fiber post and customized anatomic glass fiber post, milled glass fiber post-and-core, and milled polyetheretherketone post-and-core) and mechanical aging (without and with mechanical aging). Three hundred thousand cycles of mechanical fatigue were performed and compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were reported and stress distribution was analyzed by finite elements analysis. RESULTS: There was a significant effect of post type (p = 0.032) and mechanical aging (p = 0.009), but no double interaction (p = 0.879). Higher values were recorded in the milled glass fiber and polyetheretherketone post-and-core groups compared to the prefabricated glass fiber post groups, and no significant difference was found among anatomic glass fiber post groups and other groups. Reparable fractures were predominant in the milled glass fiber and polyetheretherketone post-and-core groups. Prefabricated glass fiber posts and milled polyetheretherketone post-and-cores showed similar stress distribution. CONCLUSIONS: Post type and mechanical aging influence the compression force resistance and fracture pattern of weakened roots. Milled glass fiber and polyetheretherketone post-and-cores exhibited higher compression force resistance and more reparable fractures compared to prefabricated glass fiber posts. Prefabricated glass fiber posts and milled polyetheretherketone post-and-cores showed similar stress distribution.

Factors associated with the proportion of abnormal results in screening mammograms: ecological study / Factores asociados a la proporción de resultados alterados en mamografías de tamizaje: estudio ecológico / Fatores associados a proporção de resultados alterados nas mamografias de rastreamento: estudo ecológico

ABSTRACT Objective: To analyze the factors associated with the proportion of abnormal results in screening mammograms. Methods: Ecological study, with data from DATASUS/SISCAN, Atlas Brasil do Desenvolvimento Humano, Fundação SEADE, and Sistema e-Gestor, from 2016 to 2019, of women aged 50 to 69 years in the 645 municipalities of São Paulo (Brazil). Independent variables were associated with the outcome: proportion of unsatisfactory coverage of abnormal test results (Breast Imaging Reporting and Data System - BI-RADS® 0, 4 and 5 proportion >10% of tests performed). Multiple Poisson regression was used. Results: Higher proportion of screening mammography (PR=1.20; 95%CI: 1.00;1.45), higher percentage of poor (PR=1.20; 95%CI: 1.07;1.36), low (PR=1.57; 95%CI: 1.38;1.78) and medium coverage of the Family Health Strategy (ESF) (PR=1.30; 95%CI: 1.09;1.52) were associated to the outcome. Conclusion: Socioeconomic and FHS coverage factors mediate the proportion of mammograms with abnormal results in public health services. Therefore, they are important aspects in the fight against breast cancer.

RESUMEN Objetivo: Analizar los factores asociados a la proporción de resultados alterados en las mamografías de tamizaje. Métodos: Estudio ecológico, con datos de DATASUS/SISCAN, Atlas Brasil do Desenvolvimento Humano, Fundação SEADE y Sistema e-Gestor, de 2016 a 2019, de mujeres de 50 a 69 años en los 645 municipios de São Paulo (Brasil). Las variables independientes se asociaron con el resultado: proporción de cobertura insatisfactoria de resultados de pruebas alteradas (BreastImagingReporting and Data System - BI-RADS® 0, 4 y 5 proporción >10% de pruebas realizadas). Se utilizó la regresión de Poisson múltiple. Resultados: Mayor proporción de mamografía de tamizaje (RP=1,20; IC95%: 1,00;1,45), mayor porcentaje de mala (RP=1,20; IC95%: 1,07;1,36), baja (RP=1,57; IC95%: 1,38) ;1,78) y cobertura media de la Estrategia Salud de la Familia (ESF) (RP=1,30; IC95%: 1,09;1,52) se asociaron al desenlace. Conclusión: Factores socioeconómicos y de cobertura de la ESF median la proporción de mamografías alteradas en el servicio público. Por lo tanto, son aspectos importantes en la lucha contra CM.

RESUMO Objetivo: Analisar os fatores associados aproporção de resultados alterados nas mamografias de rastreamento. Métodos: Estudo ecológico, com dados do DATASUS/SISCAN, Atlas Brasil do Desenvolvimento Humano, Fundação SEADE, e Sistema e-Gestor, de 2016 a 2019, de mulheres de 50 a 69 anos dos 645 municípios de São Paulo (Brasil).Variáveis independentes foram associadas ao desfecho: proporção de cobertura insatisfatória de resultados de exames alterados (proporção Breast Imaging Reporting and Data System - BI-RADS® 0, 4 e 5 >10% dos exames realizados). Utilizou-se regressão múltipla de Poisson. Resultados: Maior proporção de mamografia de rastreamento (RP=1,20; IC95%: 1,00;1,45), maior porcentagem de pobres (RP=1,20; IC95%: 1,07;1,36), baixa (RP= 1,57; IC95%: 1,38;1,78) e média cobertura de Estratégia Saúde da Família (ESF) (RP=1,30; IC95%: 1,09;1,52) foram associados ao desfecho. Conclusão: Fatores socioeconômicos e de cobertura da ESF medeiam a proporção de mamografias alteradas no serviço público. Portanto, são aspectos importantes no combate ao câncer de mama.

Spectrophotometric analysis of internal bleaching of traumatized teeth with coronal discoloration following regenerative endodontic procedures

Aim: The objective of this study was to describe a case series concerning internal bleaching of anterior traumatized teeth that underwent regenerative endodontic procedures (REP). Methods: Seven non-vital maxillary anterior teeth discolored after regenerative endodontic procedures were included and divided into two groups according to the medication protocol used in the REP: (1) Triple antibiotic paste (TAP) group (n=4); (2) Calcium hydroxide and 2% chlorhexidine gel (HC+CHX) (n=3). The bleaching technique used was walking bleach, where sodium perborate associated with distilled water was used. Bleaching agent was replaced weekly until the darkened tooth was slightly lighter than the adjacent tooth. The color was recorded with the aid of a digital spectrophotometer in two moments (T1: prior the first session of bleaching, T2: fourteen days after the last session of bleaching). The change in color after the procedure (ΔE) was calculated and reported in a descriptive analysis. Results: The ΔE for all teeth showed color differences exceeding the perceptibility threshold (ΔE > 3.7). Both groups showed similar ΔE (TAP: 18.3 ± 11.5; HC+CHX: 14 ± 11.2) at the end of the treatment. The average number of sessions needed to achieve satisfactory results was 1.7 ± 0.6 for HC+CHX group and 2.3 ± 0.5 for TAP group. Conclusion: Internal bleaching with sodium perborate associated with distilled water is effective in treating discolored teeth after regenerative endodontic procedures

Comparative Evaluation of Bulk-Fill Composite Resins: Knoop Microhardness, Diametral Tensile Strength and Degree of Conversion.

Purpose: Bulk-fill composite resins were developed to reduce time and facilitate the restorative procedure. However, considering their recent introduction on the market and the new formulations, their performance still requires evaluation. This study aimed to evaluate Knoop microhardness (KHN), diametral tensile strength (DTS) and degree of conversion (DC) of three Bulk-Fill composite resins and a conventional one. Materials and Methods: Sixty samples (n = 15; 8 mm ø x 4 mm height) were confectioned using a mold. Filtek Bulk-Fill (FBF), Tetric N-Ceram Bulk-Fill (TNC) and SonicFill 2 (SF2) were placed in 4 mm increments, and Filtek Z350 (FZ350) was placed in 2 mm increments. The KHN of top and bottom surfaces were tested using Knoop Hardness tester at 10 gf/10s. The DTS was tested under compressive load at 1.0 mm/min. The DC was measured by Fourier Transform Infrared (FTIR) spectroscopy. Differences in DTS and DC were analyzed by ANOVA and Tukey post hoc test. For KHN, Kruskal-Wallis and Wilcoxon tests were performed at α = 0.05. Results: Top surfaces of all composite resins had higher KHN than bottom surfaces. At top and bottom surfaces, FZ350 showed higher KHN than TNC and SF2. The highest DTS was obtained by FBF, followed by FZ350 and SF2. The highest DC was obtained by SF2, the lowest one was obtained by FBF. Conclusion: From Bulk-Fill composite resins, FBF presented the best KHN and DTS results. The SF2 showed the best DC. Further studies are required to ensure whether these differences can negatively influence the behavior of in vivo restorations.

TiO2 nanotube-containing glass ionomer cements display reduced aluminum release rates.

Titanium dioxide nanotubes (TiO2-nts) were incorporated into a glass ionomer cement (GIC) with improved mechanical properties and antibacterial activity. The aims of the present in vitro study were to define the elemental characterization, aluminum (Al) release rate, and initial working time for GIC reinforced with TiO2-nts, in an experimental caries model. TiO2-nts were incorporated into GIC powder components at 5% by weight, and compared with unblended GIC. Experimental approaches used energy-dispersive spectrometry (EDS), atomic absorption spectrophotometry (AAS), and brightness loss to define surface element properties, Al release rates, and initial working time, respectively. Statistical analysis was performed by 2-way ANOVA, Tukey's test, generalized linear models, and Student's t test (a = 0.05). EDS data analysis revealed that TiO2-nts incorporated into GIC had no significant impact on the typical elemental composition of GICs in an in vitro caries model. Regarding the demineralizing solution, GIC with TiO2-nt significantly decreased the Al release rate, compared with the control group (p < 0.0001). Moreover, TiO2-nt incorporated into GIC did not alter the initial working time of the material (p > 0.05). These findings add information to our scientific body of knowledge concerning the potential impact of TiO2-nt on the performance of conventional GICs.

PEEK and fiberglass intra-radicular posts: influence of resin cement and mechanical cycling on push-out bond strength.

OBJECTIVES: To evaluate the bond strength of four types of posts (pre-fabricated fiberglass post, fiberglass post anatomized with composite resin, milled fiberglass post, and milled polyetheretherketone (PEEK) post), and two types of resin cements (conventional and self-adhesive) by assessing immediate bond strength and post-mechanical aging at each root third. MATERIALS AND METHODS: Bovine endodontically treated roots (16 groups, n = 8) were prepared and the posts were produced and luted; the specimens of aging groups were cycled (300,000 cycles under 50 N load at 1.2 Hz frequency); six slices of each root were obtained; push-out test was performed by using a universal testing machine (500 N load at 1 mm/min cross speed); fracture pattern was classified into five levels. The statistical analyses used were three-way ANOVA, Tukey's test (for bond strength), and Fisher's test (for fracture pattern) (α < 0.05). RESULTS: Differences were found between the cements for posts (conventional: p < 0.001; self-adhesive: p = 0.002), whereas no difference was found for root region (p = 0.941; p = 0.056, respectively); analysis of each root showed significant differences for cements (p < 0.001), posts (p < 0.001), and mechanical cycling (p = 0.001); in terms of double interaction, differences were found for posts and mechanical cycling (p = 0.005); no other interactions were observed (double or triple); the fracture pattern showed difference between the groups for both cements. CONCLUSIONS: Milled PEEK posts seem to be a good clinical option, but they require improvement of CAD-CAM technology and advances towards their adhesion. CLINICAL RELEVANCE: Milled posts are promising and can reduce clinical time for rehabilitation of extensively destroyed teeth.

Influence of Adhesion Promoter Primers on Polymerization Kinetics and Long-term Bond Strength of Composite Cements to Zirconia.

PURPOSE: To investigate the influence of primers on polymerization kinetics of resin-based luting and its effect on the microhardness and bond strength to zirconia. Materials and Methods: Panavia V5 (PV; Kuraray Noritake) with Tooth Primer (TPprimer; Kuraray Noritake) or Clearfil Ceramic Primer (CPprimer; Kuraray Noritake), and RelyX Ultimate (RU; 3M Oral Care) with Scotchbond Universal (SUadhesive; 3M Oral Care) were evaluated. Polymerization kinetics of luting materials with or without primers (TPprimer or SUadhesive) were evaluated using Fourier transform near-infrared (FT-NIR) spectroscopy in self- and dual-curing modes (n = 5). Microhardness of luting materials was evaluated after 1, 12, and 24 h (n = 5). Shear bond strengths to zirconia ceramics (Katana Zirconia, Kuraray Noritake; and Lava Esthetic, 3M Oral Care) after 24 h and 1 year (n = 8) were assessed to determine the effect of the following surface treatments: no treatment, non-thermal atmospheric plasma, primer (CPprimer or SUadhesive), and the combination of plasma + primers. Statistical analyses were performed at a 5% significance level. RESULTS: PV achieved a significantly higher degree of conversion (DC) when TPprimer was used, while there was no increase in conversion for RU combined with SUadhesive. Light activation significantly improved polymerization, which also produced greater microhardness. CPprimer and SUadhesive significantly improved immediate bond strength to zirconia ceramics. However, after 1 year, only SUadhesive with RU was able to maintain the bond strength. Plasma surface treatment did not improve bonding to zirconia. CONCLUSION: The use of primers improved the DC for PV only. Light curing produced higher conversion and microhardness for both resin-based luting materials. Bond strength to zirconia was improved when primers were used. However, only RU demonstrated reliable long-term adhesion to zirconia.

The association of inadequate lip coverage and malocclusion with dental trauma in Brazilian children and adolescents - A systematic review and meta-analysis.

BACKGROUND/AIM: Dental trauma (DT) occurs frequently in children and adolescents. Therefore, understanding the factors associated with its occurrence in these age groups is important to establish specific preventive measures. The aim of this study was to investigate the relationships of lip coverage, overjet, and open bite to dental trauma in Brazilian children and adolescents. MATERIAL AND METHODS: The review protocol was registered in the PROSPERO database (CRD42020156290) and the bibliographic search was performed in nine electronic databases until July 2020. The studies included were observational, performed in Brazil, with healthy children and adolescents (0-19 years old), and without the restriction of date or language. Two reviewers assessed the individual risk of bias of the eligible studies with a standardized checklist. The meta-analyses were stratified by dentition stage and age range using fixed or random effects, odds ratio (OR) as the effect measure, and 95% confidence interval. The heterogeneity across studies was assessed with the I² test and the GRADE approach assessed the certainty of evidence. RESULTS: The search presented 2493 initial results, from which 55 met the eligibility criteria and were included. Most studies (67%) presented a low risk of bias and were published between 2000 and 2019. Children and adolescents with inadequate lip coverage are 1.86-2.36 times more likely to suffer from DT, while those with increased overjet are 1.94-3.11 times more likely. Children with primary dentitions and anterior open bites are 1.76 (95% CI: 1.20-2.59) times more likely to suffer from DT. The certainty of evidence varied from very low to moderate. CONCLUSIONS: Inadequate lip coverage, increased overjet, and anterior open bite are associated with the occurrence of dental trauma in Brazilian children and adolescents.

Chemomechanical preparation influences the microbial community and the levels of LPS, LTA and cytokines in combined endodontic-periodontal lesions: A clinical study.

BACKGROUND: This study was conducted to compare the microbiomes, the levels of lipopolysaccharides (LPS), lipoteichoic acid (LTA), and cytokines (interleukin [IL]-1ß and tumor necrosis factor-alpha [TNF-α]), before and after chemomechanical preparation (CMP) of the root canals (RC) and their associated periodontal pockets (PP) in teeth with combined EPL. MATERIALS: Samples were taken from 10 RC and PP, before and after CMP. The microbiomes (next-generation sequencing, V3-V4 hypervariable region of the 16S rRNA gene), microbiome diversity (bioinformatics analyses), LPS (limulus amebocyte lysate), LTA, IL-1ß, and TNF-α (ELISA) were evaluated. A statistical analysis was performed with significance level set at 5%. RESULTS: The most abundant phyla in both sites were Firmicutes and Proteobacteria. Comparative studies of bacterial genera species revealed that some increased and others decreased after CMP at both sites. A 3% reduction in Gram-negative bacteria (RC) and a 4% increase in Gram-positive bacteria (PP) were detected. LPS levels were 4.4 times higher in PP than in the RC. LTA was detected in all samples investigated. Higher levels of IL-1ß and TNF-α were detected in both sites at baseline. After CMP, LPS, LTA, IL-1ß and TNF-α were reduced in both sites. CONCLUSION: The microbial community in the RC and PP in teeth with combined EPL indicated a similarity between both sites. CMP effectively reduced the microbial load and the LPS levels from teeth with EPL, and consequently diminished the cytokine levels. The reduction in LTA levels in the RC and PP proved challenging.