Electrophoretic time-of-flight measurements of single DNA molecules with two stacked nanopores.

Electrophoretic transport through a solid-state nanodevice comprised of two stacked nanopore sensors is used to determine the free-solution mobility of DNA molecules based on their "time-of-flight" between the two pores. Mobility measurements are possible at very low (100 pM) DNA concentration and for low as well as high salt concentrations (here 30 mM and 1 M KCl). The mechanism of DNA transport through the device is elucidated by statistical analysis, showing the free-draining nature of the translocating DNA polymers and a barrier-dominated escape through the second pore. Furthermore, consecutive threading of single molecules through the two pores can be used to gain more detailed information on the dynamics of the molecules by correlation analysis, which also provides a direct electrical proof for translocation.

A pore-cavity-pore device to trap and investigate single nanoparticles and DNA molecules in a femtoliter compartment: confined diffusion and narrow escape.

Spatial confinement from the nano- to the microscale is ubiquitous in nature. Striving to understand the behavior of nanoscale objects in confined domains we present a nanofluidic silicon device which consists of two stacked nanopores forming the in/outlets to a pyramidal cavity of micrometer dimensions (10 fL volume). Being electrically addressable, charged objects can be actively loaded into, trapped inside, and unloaded from the "pore-cavity-pore" (PCP) device. When operated passively, confined Brownian motion and the entropy barriers of the nanopores govern the behavior of nano-objects within the PCP device. We present measurements with single fluorescent nanoparticles as well as particle-ensembles and analyze their trajectories and residence times. Experimental data are compared to random walk simulations and analytical theories on confined diffusion and the Brownian escape of nano-objects across entropy barriers. Single particle data corroborate analytical solutions of the narrow escape problem, but ensemble measurements indicate crowding effects even at low particle concentrations. The utilization of the device to trap biomolecules is demonstrated for single λ-DNA molecules.

Multiplexed parallel single transport recordings on nanopore arrays.

We introduce a nanofabricated silicon chip for massively multiplexed analysis of membrane channels and transporters in suspended lipid membranes that does not require any surface modification or organic solvent. Transport processes through single membrane complexes are monitored by fluorescence. The chip consists of an array of well-defined nanopores, addressing an individual pyramidal back-reflecting 30-fL compartment. The setup allows simultaneous analyses of ∼1,000 single transmembrane events in one field of view, observing translocation kinetics of transmembrane complexes.

Fabrication of metallized nanopores in silicon nitride membranes for single-molecule sensing.

The fabrication and characterization of a metallized nanopore structure for the sensing of single molecules is described. Pores of varying diameters (>10 nm) are patterned into free-standing silicon nitride membranes by electron-beam lithography and reactive ion etching. Structural characterization by transmission electron microscopy (TEM) and tomography reveals a conical pore shape with a 40 degrees aperture. Metal films of Ti/Au are vapor deposited and the pore shape and shrinking are studied as a function of evaporated film thickness. TEM tomography analysis confirms metalization of the inner pore walls as well as conservation of the conical pore shape. In electrical measurements of the transpore current in aqueous electrolyte solution, the pores feature very low noise. The applicability of the metallized pores for stochastic sensing is demonstrated in real-time translocation experiments of single lambda-DNA molecules. We observe exceptionally long-lasting current blockades with a fine structure of distinct current levels, suggesting an attractive interaction between the DNA and the PEGylated metallic pore walls.

Electrically facilitated translocations of proteins through silicon nitride nanopores: conjoint and competitive action of diffusion, electrophoresis, and electroosmosis.

Solid-state nanopores bear great potential to be used to probe single proteins; however, the passage of proteins through nanopores was found to be complex, and unexpected translocation behavior with respect to the passage direction, rate, and duration was observed. Here we study the translocation of a model protein (avidin) through silicon nitride nanopores focusing on the electrokinetic effects that facilitate protein transport across the pore. The nanopore zeta potential zeta(pore) and the protein zeta potential zeta(protein) are measured independently as a function of solution pH. Our results reveal that electroosmotic transport may enhance or dominate and reverse electrophoretic transport in nanopores. The translocation behavior is rationalized by accounting for the charging states of the protein and the pore, respectively; the resulting translocation direction can be predicted according to the difference in zeta potentials, zeta(protein) - zeta(pore). When electrophoresis and electroosmosis cancel each other out, diffusion becomes an effective (and bias-independent) mechanism which facilitates protein transport across the pore at a significant rate.

Data analysis of translocation events in nanopore experiments.

Nanopores have become important tools for single molecule experiments, where information about the properties of DNA/RNA or proteins is inferred from current pulses elicited by individual molecules as they traverse a single pore. However, because of necessary electronic filters employed in the measurement technique, the extraction of meaningful information from short pulses is limited. This restricts the use of nanopores for the investigation of small molecules which cross the pore rapidly. Here we present a method which significantly improves the accuracy of the analysis of noise-filtered current pulses. We introduce improved criteria to measure the pulse width and propose a method to evaluate the pulse height from the falling edge of the pulse, which renders the identification of a pulse plateau unnecessary. The new methods are compared to conventional routines and validated by analyzing representative current pulses as well as experimental protein translocation data. It is demonstrated that the pulse properties can be recovered with satisfying accuracy beyond the usual limitations of Bessel filters, i.e., from pulses featuring a width of merely 0.3f(c)(-1) (f(c) being the filter cutoff frequency).

PNA-PEG modified silicon platforms as functional bio-interfaces for applications in DNA microarrays and biosensors.

The synthesis and characterization of two types of silicon-based biofunctional interfaces are reported; each interface bonds a dense layer of poly(ethylene glycol) (PEG(n)) and peptide nucleic acid (PNA) probes. Phosphonate self-assembled monolayers were derivatized with PNA using a maleimido-terminated PEG(45). Similarly, siloxane monolayers were functionalized with PNA using a maleimido-terminated PEG(45) spacer and were subsequently modified with a shorter methoxy-terminated PEG(12) ("back-filling"). The long PEG(45) spacer was used to distance the PNA probe from the surface and to minimize undesirable nonspecific adsorption of DNA analyte. The short PEG(12) "back-filler" was used to provide additional passivation of the surface against nonspecific DNA adsorption. X-ray photoelectron spectroscopic (XPS) analysis near the C 1s and N 1s ionization edges was done to characterize chemical groups formed in the near-surface region, which confirmed binding of PEG and PNA to the phosphonate and silane films. XPS also indicated that additional PEG chains were tethered to the surface during the back-filling process. Fluorescence hybridization experiments were carried out with complementary and noncDNA strands; both phosphonate and siloxane biofunctional surfaces were effective for hybridization of cDNA strands and significantly reduced nonspecific adsorption of the analyte. Spatial patterns were prepared by polydimethylsiloxane (PDMS) micromolding on the PNA-functionalized surfaces; selective hybridization of fluorescently labeled DNA was shown at the PNA functionalized regions, and physisorption at the probe-less PEG-functionalized regions was dramatically reduced. These results show that PNA-PEG derivatized phosphonate monolayers hold promise for the smooth integration of device surface chemistry with semiconductor technology for the fabrication of DNA biosensors. In addition, our results confirm that PNA-PEG derivatized self-assembled carboxyalkylsiloxane films are promising substrates for DNA microarray applications.

Organophosphonate-based PNA-functionalization of silicon nanowires for label-free DNA detection.

We investigated hydroxyalkylphosphonate monolayers as a novel platform for the biofunctionalization of silicon-based field effect sensor devices. This included a detailed study of the thin film properties of organophosphonate films on Si substrates using several surface analysis techniques, including AFM, ellipsometry, contact angle, X-ray photoelectron spectroscopy (XPS), X-ray reflectivity, and current-voltage characteristics in electrolyte solution. Our results indicate the formation of a dense monolayer on the native silicon oxide that has excellent passivation properties. The monolayer was biofunctionalized with 12 mer peptide nucleic acid (PNA) receptor molecules in a two-step procedure using the heterobifunctional linker, 3-maleimidopropionic-acid-N-hydroxysuccinimidester. Successful surface modification with the probe PNA was verified by XPS and contact angle measurements, and hybridization with DNA was determined by fluorescence measurements. Finally, the PNA functionalization protocol was translated to 2 microm long, 100 nm wide Si nanowire field effect devices, which were successfully used for label-free DNA/PNA hybridization detection.