Distal Humerus Morphological Analysis of Chinese Individuals: A Statistical Shape Modeling Approach.

OBJECTIVE: A detailed analysis of the morphology of distal humeral articulation can help in the creation of anatomic prostheses of hemiarthroplasty. This study used statistical shape modeling to evaluate the 3D morphology of the distal humerus in healthy Chinese individuals and to investigate the proper articular morphology differences. METHODS: A statistical shape model (SSM) of the distal humerus was created using CT scans of 106 survey-confirmed nonpathologic elbows. In addition, the articular components of each principal component (PC) were selected and fitted on the mean mode. The Euclidean point-to-mesh distance of articular modes was calculated as a measurement the proper change in the morphology of the articulation. RESULTS: The first seven PCs jointly accounted for 80.9% of the total variation (44.4%, 12.2%, 7.9%, 5.9%, 4.1%, 3.4% and 3%, respectively). In the mean model, the distance between the medial and lateral epicondyles was 57.4 mm, the width of the articulation was 42.1 mm, and the angle of the transepicondylar line (TEL) and C line was 4.8°. The articular surface differences of the first PC were significant (RMS: 1.43 mm in the -3 SD model and 2.38 mm in the +3 SD model), whereas under other conditions, the differences were not remarkable despite the maximum deformation not exceeding 1 mm. CONCLUSION: A novel method (SSM) was used to evaluate the 3D morphology of the distal humerus in healthy Chinese individuals and investigate the proper articular shape differences. We found the proper shape of articular surface basically transformed into one variation pattern which was relevant to the bone size, even though the morphology of distal humerus possessed complicated variation modes. The findings of this study can be helpful to design the next generation of elbow hemiarthroplasty in the future.

Establishment of a rabbit's model for modified Capanna technique.

BACKGROUND: Massive bone allograft with an intramedullary vascularized fibula (Capanna technique) represents one of the most widely used methods for the reconstruction of massive bone defect. However, the mechanisms, healing process, and underlying influential factors were poorly understood due to the lack of suitable experimental animal models. METHODS: Critical-sized defects (CSD) in bone were constructed in the proximal tibia of 24 rabbits and randomly divided into two groups. Allogeneic bone segments of the same size as CSDs were obtained from another 12 rabbits and then inactivated. In group Ⅰ, an ipsilateral pedicled vascularized fibula was dissociated and transferred into the intramedullary cavity of allograft to assemble a composite for CSD reconstruction (Capanna technique), while group Ⅱ received a reconstruction with allogeneic bone alone. Radiographic evaluation was performed every week after the operation to assess union status. All animals were sacrificed at 16th week, and the specimens were histologically analyzed. RESULTS: All animals survived without severe intraoperative complications. There was one rabbit (8.33%) in group Ⅰ developed a postoperative infection and died, while three rabbits (25%) had postoperative complications in group Ⅱ (two died of infection and one died of internal fixation fracture). Radiographically, the mean time to union at the allograft-host junction in group Ⅰ was 12.8 ± 1.80 weeks, significantly shorter than in group II (>15.18±1.12 weeks; p<0.001). The grade of graft union of group Ⅰ was significantly higher than that of group Ⅱ both at 8th and 16th week (8th week: p = 0.035; 16th week: p = 0.033). Fully bone union at the junctions was histologically confirmed in all specimens in group Ⅰ and 66.67% (8/12) in group Ⅱ. CONCLUSION: Combined allograft and intramedullary vascularized fibula transfer in rabbit's tibia represent an ideal model that accurately simulates the Capanna technique for CSD reconstruction.

Comparative effectiveness of PEEK rods versus titanium alloy rods in cervical fusion in a new sheep model.

BACKGROUND: Pedicle screw and rod instrumentation based on titanium can produce satisfying strength and stiffness for spinal fusion. However, excessive stiffness produced by titanium rods may cause stress shielding. Thus, polyetheretherketone (PEEK) rods with a low modulus of elasticity were introduced as substitutes for titanium rods. The purpose of this paper is to compare the effectiveness of PEEK rods versus titanium alloy rods in anterior spinal fusion with a new sheep model. METHODS: Sheep models of anterior-posterior cervical fusion were innovatively adopted in our study. Twenty-four sheep were randomly divided into a control group and a treatment group that received anterior-posterior cervical fixation with titanium rods or PEEK rods, respectively. Then, surgical segments were harvested and assessed by X-ray, micro-CT and histological examination to evaluate the efficiency of bone fusion. RESULTS: No complications related to fixation were found during the research process. The results of the X-ray showed a stronger spinal fusion in the PEEK rod groups than in the titanium rod group at 12 weeks postoperatively, and both groups underwent bone fusion at 24 weeks postoperatively. The results of micro-CT showed that fixation with PEEK rods achieved better bone ingrowth at an early postoperative stage (12 weeks) compared to fixation with titanium rods (bone volume fraction (BVF): 20.26 ± 4.36% vs 14.48 ± 3.49%, p < 0.05). The same trend was detected in the histological analysis, where the mineralized bone fraction in the experiment group (21.01 ± 3.48%) was significantly higher than that in the control group (16.73 ± 2.95%). In addition, better osseointegration was found in the experiment group at the early postoperative stage at 12 weeks (bone apposition (BA): 16.22 ± 3.24% vs 11.67 ± 3.63%, p < 0.05). However, there were no significant differences at 24 weeks postoperatively. CONCLUSION: PEEK rods can be used safely in a sheep model of anterior-posterior cervical fixation. Compared to traditional titanium rods, earlier and more evident bone fusion was found in the PEEK rods group. These slides can be retrieved under Electronic Supplementary Material.

Landscape of RNAs in human lumbar disc degeneration.

Accumulating evidence indicates noncoding RNAs (ncRNAs) fine-tune gene expression with mysterious machinery. We conducted a combination of mRNA, miRNA, circRNA, LncRNA microarray analyses on 10 adults' lumbar discs. Moreover, we performed additional global exploration on RNA interacting machinery in terms of in silico computational pipeline. Here we show the landscape of RNAs in human lumbar discs. In general, the RNA-abundant landscape comprises 14,635 mRNAs (37.93%), 2,059 miRNAs (5.34%), 18,995 LncRNAs (49.23%) and 2,894 (7.5%) circRNAs. Chromosome 1 contributes for RNA transcription at most (10%). Bi-directional transcription contributes evenly for RNA biogenesis, in terms of 5' to 3' and 3' to 5'. Despite the majority of circRNAs are exonic, antisense (1.49%), intergenic (0.035%), intragenic (1.69%), and intronic (6.29%) circRNAs should not be ignored. A single miRNA could interact with a multitude of circRNAs. Notably, CDR1as or ciRS-7 harbors 66 consecutive binding sites for miR-7-5p (previous miR-7), evidencing our pipeline. The majority of binding sites are perfect-matched (78.95%). Collectively, global landscape of RNAs sheds novel insights on RNA interacting mechanisms in human intervertebral disc degeneration.

Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature.

BACKGROUND: Although modular prosthesis is commercially available to meet requirements in most limb salvage surgeries, customized prosthesis is still needed. In contrast to traditional complicated procedures, rapid prototyping (RP) technique can directly manufacture customized titanium prosthesis. The objectives of this study were to describe the workflow of this technique and show the follow-up results of patients. METHODS: Three patients with clavicle Ewing's sarcoma (ES), scapular ES, and pelvic chondrosarcoma (CS) were scanned by computer tomography (CT). The images were segmented and reconstructed for preoperative planning and prosthesis design. Then, the data of prosthesis were imported into an electron beam melting system to manufacture implants. These three patients received prosthesis implantation after tumor excision. They were followed up to evaluate survival rate, functional outcome, and complications. RESULTS: All patients were alive with no evidence of disease. The Musculoskeletal Tumor Society (MSTS) scores were 93, 73, and 90 % for patients with clavicle ES, scapular ES, and pelvic CS, respectively. No surgical complications including limb length discrepancy, screw loosening, and implant breakage were observed in current study. CONCLUSIONS: Electron beam melting (EBM) is a useful method to directly manufacture customized titanium prostheses. It might improve the effectiveness of limb salvage surgery for sarcomas in unusual sites.

Noncoding RNAs in human intervertebral disc degeneration: An integrated microarray study.

Accumulating evidence indicates that noncoding RNAs play important roles in a multitude of biological processes. The striking findings of miRNAs (microRNAs) and lncRNAs (long noncoding RNAs) as members of noncoding RNAs open up an exciting era in the studies of gene regulation. More recently, the reports of circRNAs (circular RNAs) add fuel to the noncoding RNAs research. Human intervertebral disc degeneration (IDD) is a main cause of low back pain as a disabling spinal disease. We have addressed the expression profiles if miRNAs, lncRNAs and mRNAs in IDD (Wang et al., J Pathology, 2011 and Wan et al., Arthritis Res Ther, 2014). Furthermore, we thoroughly analysed noncoding RNAs, including miRNAs, lncRNAs and circRNAs in IDD using the very same samples. Here we delineate in detail the contents of the aforementioned microarray analyses. Microarray and sample annotation data were deposited in GEO under accession number GSE67567 as SuperSeries. The integrated analyses of these noncoding RNAs will shed a novel light on coding-noncoding regulatory machinery.

Three-dimensional virtual bone bank system for selecting massive bone allograft in orthopaedic oncology.

PURPOSE: Although structural bone allografts have been used for years to treat large defects caused by tumour or trauma, selecting the most appropriate allograft is still challenging. The objectives of this study were to: (1) describe the establishment of a visual bone bank system and workflow of allograft selection, and (2) show mid-term follow-up results of patients after allograft implantation. METHODS: Allografts were scanned and stored in Digital Imaging and Communications in Medicine (DICOM) files. Then, image segmentation was conducted and 3D model reconstructed to establish a visual bone bank system. Based on the volume registration method, allografts were selected after a careful matching process. From November 2010 to June 2013, with the help of the Computer-assisted Orthopaedic Surgery (CAOS) navigation system, the allografts were implanted in 14 patients to fill defects after tumour resection. RESULTS: By combining the virtual bone bank and CAOS, selection time was reduced and matching accuracy was increased. After 27.5 months of follow-up, the mean Musculoskeletal Tumor Society (MSTS) 93 functional score was 25.7 ± 1.1 points. Except for two patients with pulmonary metastases, 12 patents were alive without evidence of disease at the time this report was written. CONCLUSIONS: The virtual bone bank system was helpful for allograft selection, tumour excision and bone reconstruction, thereby improving the safety and effectiveness of limb-salvage surgery.

[Use of four kinds of three-dimensional printing guide plate in bone tumor resection and reconstruction operation].

OBJECTIVE: To explore the effectiveness of excision and reconstruction of bone tumor by using operation guide plate made by variety of three-dimensional (3-D) printing techniques, and to compare the advantages and disadvantages of different 3-D printing techniques in the manufacture and application of operation guide plate. METHODS: Between September 2012 and January 2014, 31 patients with bone tumor underwent excision and reconstruction of bone tumor by using operation guide plate. There were 19 males and 12 females, aged 6-67 years (median, 23 years). The disease duration ranged from 15 days to 12 months (median, 2 months). There were 13 cases of malignant tumor and 18 cases of benign tumor. The tumor located in the femur (9 cases), the spine (7 cases), the tibia (6 cases), the pelvis (5 cases), the humerus (3 cases), and the fibula (1 case). Four kinds of 3-D printing technique were used in processing operation guide plate: fused deposition modeling (FDM) in 9 cases, stereo lithography appearance (SLA) in 14 cases, 3-D printing technique in 5 cases, and selective laser sintering (SLS) in 3 cases; the materials included ABS resin, photosensitive resin, plaster, and aluminum alloy, respectively. Before operation, all patients underwent thin layer CT scanning (0.625 mm) in addition to conventional imaging. The data were collected for tumor resection design, and operation guide plate was designed on the basis of excision plan. Preoperatively, the operation guide plates were made by 3-D printing equipment. After sterilization, the guide plates were used for excision and reconstruction of bone tumor. The time of plates processing cycle was recorded to analyse the efficiency of 4 kinds of 3-D printing techniques. The time for design and operation and intraoperative fluoroscopy frequency were recorded. Twenty-eight patients underwent similar operations during the same period as the control group. RESULTS: The processing time of operation guide plate was (19.3 +/- 6.5) hours in FDM, (5.2 +/- 1.3) hours in SLA, (8.6 +/- 1.9) hours in 3-D printing technique, and (51.7 +/- 12.9) hours in SLS. The preoperative design and operation guide plate were successfully made, which was used for excision and reconstruction of bone tumor in 31 cases. Except 3 failures (operation guide plate fracture), the resection and reconstruction operations followed the preoperative design in the other 28 cases. The patients had longer design time, shorter operation time, and less fluoroscopy frequency than the patients of the control group, showing significant differences (P < 0.05). The follow-up time was 1-12 months (mean, 3.7 months). Postoperative X-ray and CT showed complete tumor resection and stable reconstruction. CONCLUSION: 3-D printing operation guide plates are well adapted to the requirements of individual operation for bone tumor resection and reconstruction. The 4 kinds of 3-D printing techniques have their own advantages and should be chosen according to the need of operation.

A canine model of femoral head osteonecrosis induced by an ethanol injection navigated by a novel template.

There is no consensus on how to establish models of osteonecrosis of the femoral head (ONFH) in large mammals. The aim of this study was to investigate the effectiveness of a novel canine model of ONFH, induced by a navigated injection of absolute ethanol. Using three-dimensional reconstruction and rapid prototyping manufacturing techniques, a new template was designed and processed to navigate the ethanol injection. The femoral heads of 18 adult dogs were injected with ethanol. Macroscopic, X-ray and histological examinations were performed at 3, 6, and 9 weeks after the operation. Further, computed tomography (CT), magnetic resonance imaging (MRI), and radionuclide scans were performed 6 weeks postoperatively. Three weeks after the operation, the femoral heads showed evidence of osteonecrosis including increasing numbers of empty lacunae, decreased hematopoietic cells, and destroyed adipose tissue in the medullary cavity, which increased in severity at the subsequent follow-up evaluations at 6 and 9 weeks. Fractured trabeculae and fibrous tissue were noted 9 weeks postoperatively. Image analysis also revealed evidence of osteonecrosis, such as several osteopenic areas with sclerotic rims on the X-ray, several areas of low bone mineral density with sclerosis on the CT scan, increased uptake of the nuclide species in MRI, and an inhomogeneous long T2 signal on the radioisotopic images. Ethanol injection navigated by our novel template was successful in establishing a canine model of ONFH. This model can be used to test new treatment modalities for human ONFH.