RESUMO
Strains of Penicillium spp. are used for fungi-ripened cheeses and Aspergillus spp. routinely contaminate maize and other crops. Some of these strains can produce toxic secondary metabolites (mycotoxins), including the neurotoxin α-cyclopiazonic acid (CPA). In this work, we developed a homogeneous upconversion-resonance energy transfer (UC-RET) immunoassay for the detection of CPA using a novel epitope mimicking peptide, or mimotope, selected by phage display. CPA-specific antibody was used to isolate mimotopes from a cyclic 7-mer peptide library in consecutive selection rounds. Enrichment of antibody binding phages was achieved, and the analysis of individual phage clones revealed four different mimotope peptide sequences. The mimotope sequence, ACNWWDLTLC, performed best in phage-based immunoassays, surface plasmon resonance binding analyses, and UC-RET-based immunoassays. To develop a homogeneous assay, upconversion nanoparticles (UCNP, type NaYF4:Yb3+, Er3+) were used as energy donors and coated with streptavidin to anchor the synthetic biotinylated mimotope. Alexa Fluor 555, used as an energy acceptor, was conjugated to the anti-CPA antibody fragment. The homogeneous single-step immunoassay could detect CPA in just 5 min and enabled a limit of detection (LOD) of 30 pg mL-1 (1.5 µg kg-1) and an IC50 value of 0.36 ng mL-1. No significant cross-reactivity was observed with other co-produced mycotoxins. Finally, we applied the novel method for the detection of CPA in spiked maize samples using high-performance liquid chromatography coupled to a diode array detector (HPLC-DAD) as a reference method.
Assuntos
Técnicas Biossensoriais , Micotoxinas , Imunoensaio/métodos , Micotoxinas/análise , Peptídeos/química , Transferência de EnergiaRESUMO
Owing to the high carcinogenicity of aflatoxins, these toxic secondary metabolites pose a severe risk to human and animal health and can have major economic implications. Herein, we report the development of a noncompetitive immunoassay for aflatoxins based on a monoclonal capture antibody and a unique anti-immunocomplex (anti-IC) antibody fragment (scFv) isolated from a synthetic antibody repertoire. The anti-IC scFv recognizes the immunocomplex and enables the development of noncompetitive sandwich-type assays despite the small size of the analyte. The single-step assay developed in this work, with a detection limit of 70 pg mL-1, could detect aflatoxins within 15 min. The assay was applied to the analysis of spiked food samples, and the results showed that the method could provide a rapid and simple tool for aflatoxin detection. Moreover, the work demonstrates the potential of anti-IC antibodies and non-competitive immunoassays for the analysis of small molecule contaminants.
Assuntos
Aflatoxinas , Animais , Anticorpos Monoclonais , Imunoensaio/métodosRESUMO
Antibodies are widely employed as biorecognition elements for the detection of a plethora of compounds including food and environmental contaminants, biomarkers, or illicit drugs. They are also applied in therapeutics for the treatment of several disorders. Recent recommendations from the EU on animal protection and the replacement of animal-derived antibodies by non-animal-derived ones have raised a great controversy in the scientific community. The application of recombinant antibodies is expected to achieve a high growth rate in the years to come thanks to their versatility and beneficial characteristics in comparison to monoclonal and polyclonal antibodies, such as stability in harsh conditions, small size, relatively low production costs, and batch-to-batch reproducibility. This review describes the characteristics, advantages, and disadvantages of recombinant antibodies including antigen-binding fragments (Fab), single-chain fragment variable (scFv), and single-domain antibodies (VHH) and their application in food analysis with especial emphasis on the analysis of biotoxins, antibiotics, pesticides, and foodborne pathogens. Although the wide application of recombinant antibodies has been hampered by a number of challenges, this review demonstrates their potential for the sensitive, selective, and rapid detection of food contaminants.
Assuntos
Anticorpos , Análise de Alimentos , Imunoensaio/métodos , Proteínas Recombinantes , Animais , Técnicas BiossensoriaisRESUMO
Mycophenolic acid (MPA) is an immunosuppressant drug commonly used to prevent organ rejection in transplanted patients. MPA monitoring is of great interest due to its small therapeutic window. In this work, a phage-displayed peptide library was used to select cyclic peptides that bind to the MPA-specific recombinant antibody fragment (Fab) and mimic the behavior of MPA. After biopanning, several phage-displayed peptides were isolated and tested to confirm their epitope-mimicking nature in phage-based competitive immunoassays. After identifying the best MPA mimetic (ACEGLYAHWC with a disulfide constrained loop), several immunoassay approaches were tested, and a recombinant fusion protein containing the peptide sequence with a bioluminescent enzyme, NanoLuc, was developed. The recombinant fusion enabled its direct use as the tracer in competitive immunoassays without the need for secondary antibodies or further labeling. A bioluminescent sensor, using streptavidin-coupled magnetic beads for the immobilization of the biotinylated Fab antibody, enabled the detection of MPA with a detection limit of 0.26 ng mL-1 and an IC50 of 2.9 ± 0.5 ng mL-1. The biosensor showed good selectivity toward MPA and was applied to the analysis of the immunosuppressive drug in clinical samples, of both healthy and MPA-treated patients, followed by validation by liquid chromatography coupled to diode array detection.
Assuntos
Ácido Micofenólico , Biblioteca de Peptídeos , Técnicas de Visualização da Superfície Celular , Humanos , Peptídeos , Proteínas RecombinantesRESUMO
Sensitive immunoassays are required for troponin, a low-abundance cardiac biomarker in blood. In contrast to conventional (analog) assays that measure the integrated signal of thousands of molecules, digital assays are based on counting individual biomarker molecules. Photon-upconversion nanoparticles (UCNP) are an excellent nanomaterial for labeling and detecting single biomarker molecules because their unique anti-Stokes emission avoids optical interference, and single nanoparticles can be reliably distinguished from the background signal. Here, the effect of the surface architecture and size of UCNP labels on the performance of upconversion-linked immunosorbent assays (ULISA) is critically assessed. The size, brightness, and surface architecture of UCNP labels are more important for measuring low troponin concentrations in human plasma than changing from an analog to a digital detection mode. Both detection modes result approximately in the same assay sensitivity, reaching a limit of detection (LOD) of 10 pg mL-1 in plasma, which is in the range of troponin concentrations found in the blood of healthy individuals.
Assuntos
Nanopartículas , Humanos , Imunoensaio , Tamanho da Partícula , Fótons , TroponinaRESUMO
Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.
Assuntos
Técnicas Biossensoriais , Nanopartículas , Qualidade dos Alimentos , Raios Infravermelhos , Nanopartículas/toxicidadeRESUMO
Due to increasing food safety standards, the analysis of mycotoxins has become essential in the food industry. In this work, we have developed a competitive upconversion-linked immunosorbent assay (ULISA) for the analysis of zearalenone (ZEA), one of the most frequently encountered mycotoxins in food worldwide. Instead of a toxin-conjugate conventionally used in competitive immunoassays, we designed a ZEA mimicking peptide extended by a biotin-linker and confirmed its excellent suitability to mimic ZEA by nuclear magnetic resonance (NMR) and surface plasmon resonance (SPR) analysis. Upconversion nanoparticles (UCNP, type NaYF4:Yb,Tm) served as background-free optical label for the detection of the peptide mimetic in the competitive ULISA. Streptavidin-conjugated UCNPs were prepared by click reaction using an alkyne-PEG-neridronate linker. The UCNP conjugate clearly outperformed conventional labels such as enzymes or fluorescent dyes. With a limit of detection of 20 pg mL-1 (63 pM), the competitive ULISA is well applicable to the detection of ZEA at the levels set by the European legislation. Moreover, the ULISA is specific for ZEA and its metabolites (α- and ß-zearalenol) without significant cross-reactivity with other related mycotoxins. We detected ZEA in spiked and naturally contaminated maize samples using liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) as a reference method to demonstrate food analysis in real samples.
Assuntos
Técnicas Biossensoriais , Micotoxinas , Zearalenona , Cromatografia Líquida , Contaminação de Alimentos/análise , Imunoensaio , Micotoxinas/análise , Peptídeos , Espectrometria de Massas em Tandem , Zea mays , Zearalenona/análiseRESUMO
The development of a bioluminescent immunosensor is reported for the determination of zearalenone (ZEA) based on a peptide mimetic identified by phage display. The peptide mimetic GW, with a peptide sequence GWWGPYGEIELL, was used to create recombinant fusion proteins with the bioluminescent Gaussia luciferase (GLuc) that were directly used as tracers for toxin detection in a competitive immunoassay without the need for secondary antibodies or further labeling. The bioluminescent sensor, based on protein G-coupled magnetic beads for antibody immobilization, enabled determination of ZEA with a detection limit of 4.2 ng mL-1 (corresponding to 420 µg kg-1 in food samples) and an IC50 value of 11.0 ng mL-1. The sensor performance was evaluated in spiked maize and wheat samples, with recoveries ranging from 87 to 106% (RSD < 20%, n = 3). Finally, the developed method was applied to the analysis of a naturally contaminated reference matrix material and good agreement with the reported concentrations was obtained.Graphical abstract.
Assuntos
Peptidomiméticos/química , Proteínas Recombinantes de Fusão/química , Zearalenona/químicaRESUMO
Phages are bacterial viruses that have gained a significant role in biotechnology owing to their widely studied biology and many advantageous characteristics. Perhaps the best-known application of phages is phage display that refers to the expression of foreign peptides or proteins outside the phage virion as a fusion with one of the phage coat proteins. In 2018, one half of the Nobel prize in chemistry was awarded jointly to George P. Smith and Sir Gregory P. Winter "for the phage display of peptides and antibodies." The outstanding technology has evolved and developed considerably since its first description in 1985, and today phage display is commonly used in a wide variety of disciplines, including drug discovery, enzyme optimization, biomolecular interaction studies, as well as biosensor development. A cornerstone of all biosensors, regardless of the sensor platform or transduction scheme used, is a sensitive and selective bioreceptor, or a recognition element, that can provide specific binding to the target analyte. Many environmentally or pharmacologically interesting target analytes might not have naturally appropriate binding partners for biosensor development, but phage display can facilitate the production of novel receptors beyond known biomolecular interactions, or against toxic or nonimmunogenic targets, making the technology a valuable tool in the quest of new recognition elements for biosensor development.
RESUMO
Mycotoxins can be found as natural contaminants in many foods and feeds, and owing to their toxic effects, it is essential to detect them before they enter the food chain. An interesting approach for the analysis of mycotoxins by competitive immunoassays is the use of epitope-mimicking peptides, or mimotopes, which can replace the toxin conjugates traditionally used in such assays. Mimotopes can be selected from phage-displayed peptide libraries even without any prior knowledge of the antibody-antigen interaction, and after identifying the target specific clones, individual clones can be efficiently amplified in bacteria and used directly in the immunoassay. Following such approach, we have previously selected and identified a dodecapeptide which functions as a mimotope for the mycotoxin fumonisin B1. In this work, we present the development and comparison of various immunoassays based on this mimotope, named A2, which has been used in the phage-displayed format in which it was selected, but also as a fluorescent recombinant fusion protein or as a synthetic peptide. The highest sensitivity was obtained with a magnetic bead-based assay using the synthetic peptide and enzymatic detection which provided a detection limit of 0.029 ng mL-1. Analysis of the binding kinetics by surface plasmon resonance (SPR) further reinforced the suitability of the synthetic peptide for the competitive immunoassays, as this mimotope showed a slightly lower affinity for the target antibody in comparison with the recombinant fusion protein. Graphical abstract.
Assuntos
Fumonisinas/análise , Imunoensaio/métodos , Micotoxinas/análise , Biblioteca de Peptídeos , Peptídeos/química , Técnicas de Visualização da Superfície Celular/métodos , Ensaio de Imunoadsorção Enzimática/métodos , Limite de Detecção , Proteínas Luminescentes/química , Proteínas Recombinantes de Fusão/química , Ressonância de Plasmônio de Superfície/métodosRESUMO
Homogeneous immunoassays represent an attractive alternative to traditional heterogeneous assays due to their simplicity, sensitivity, and speed. On the basis of a previously identified epitope-mimicking peptide, or mimotope, we developed a homogeneous fluorescence quenching immunoassay based on gold nanoparticles (AuNPs) and a recombinant epitope-mimicking fusion protein for the detection of mycotoxin fumonisin B1 (FB1). The fumonisin mimotope was cloned as a fusion protein with a yellow fluorescent protein that could be used directly as the tracer for FB1 detection without the need of labeling or a secondary antibody. Furthermore, owing to the fluorescence quenching ability of AuNPs, a homogeneous immunoassay could be performed in a single step without washing steps to separate the unbound tracer. The homogeneous quenching assay showed negligible matrix effects in 5% wheat extract and high sensitivity for FB1 detection, with a dynamic range from 7.3 to 22.6 ng mL-1, a detection limit of 1.1 ng mL-1, and IC50 value of 12.9 ng mL-1, which was significantly lower than the IC50 value of the previously reported assay using the synthetic counterpart of the same mimotope in a microarray format. The homogeneous assay was demonstrated to be specific for fumonisins B1 and B2, as no significant cross-reactivity with other mycotoxins was observed, and acceptable recoveries (86% for FB1 2000 µg kg-1 and 103% for FB1 4000 µg kg-1), with relative standard deviation less than 6.5%, were reported from spiked wheat samples, proving that the method could provide a valuable tool for simple analysis of mycotoxin-contaminated food samples.
Assuntos
Proteínas de Bactérias/química , Epitopos/química , Fumonisinas/análise , Fumonisinas/química , Ouro/química , Imunoensaio , Proteínas Luminescentes/química , Nanopartículas Metálicas/química , Proteínas de Bactérias/análise , Fluorescência , Proteínas Luminescentes/análiseRESUMO
Label-free optical biosensors are an intriguing option for the analyses of many analytes, as they offer several advantages such as high sensitivity, direct and real-time measurement in addition to multiplexing capabilities. However, development of label-free optical biosensors for small molecules can be challenging as most of them are not naturally chromogenic or fluorescent, and in some cases, the sensor response is related to the size of the analyte. To overcome some of the limitations associated with the analysis of biologically, pharmacologically, or environmentally relevant compounds of low molecular weight, recent advances in the field have improved the detection of these analytes using outstanding methodology, instrumentation, recognition elements, or immobilization strategies. In this review, we aim to introduce some of the latest developments in the field of label-free optical biosensors with the focus on applications with novel innovations to overcome the challenges related to small molecule detection. Optical label-free methods with different transduction schemes, including evanescent wave and optical fiber sensors, surface plasmon resonance, surface-enhanced Raman spectroscopy, and interferometry, using various biorecognition elements, such as antibodies, aptamers, enzymes, and bioinspired molecularly imprinted polymers, are reviewed.
Assuntos
Anticorpos/química , Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais , Enzimas/química , Óptica e Fotônica , Análise Espectral Raman , Ressonância de Plasmônio de SuperfícieRESUMO
Mycotoxins are low molecular weight molecules produced as secondary metabolites by filamentous fungi that can be found as natural contaminants in many foods and feeds. These toxins have been shown to have adverse effects on both human and animal health, and are the cause of significant economic losses worldwide. Sensors for mycotoxin analysis have traditionally applied elements of biological origin for the selective recognition purposes. However, since the 1970s there has been an exponential growth in the use of genetically engineered or synthetic biomimetic recognition elements that allow some of the limitations associated with the use of natural receptors for the analyses of these toxins to be circumvented. This review provides an overview of recent advances in the application of bioinspired recognition elements, including recombinant antibodies, peptides, aptamers, and molecularly imprinted polymers, to the development of sensors for mycotoxins based on different transduction elements. Graphical abstract Novel analytical methods based on bioinspired recognition elements, such as recombinant antibodies, peptides, aptamers, and molecularly imprinted polymers, can improve the detection of mycotoxins and provide better tools than their natural counterparts to ensure food safety.
Assuntos
Técnicas Biossensoriais/métodos , Contaminação de Alimentos/análise , Fungos/química , Micotoxinas/análise , Animais , Anticorpos Imobilizados/química , Aptâmeros de Nucleotídeos/química , Microbiologia de Alimentos , Humanos , Imunoensaio/métodos , Impressão Molecular/métodos , Micotoxinas/isolamento & purificação , Peptídeos/química , Polímeros/química , Proteínas Recombinantes/química , Técnica de Seleção de Aptâmeros/métodosRESUMO
Mimotopes, or epitope mimics, can be applied to competitive immunoassays, for the detection of low molecular weight natural toxicants, as an alternative to toxin-conjugates. In this work, we report the development of a microarray-based immunoassay for the detection of fumonisin B1 using a novel mimotope selected by phage display technology. Fumonisin-specific antibody was used to isolate mimotopes from a 12-mer peptide library in successive selection rounds. Enrichment of antibody binding phages was observed after three panning rounds, and sequence analysis of randomly selected monoclonal phages revealed two conserved peptide sequences. Clone A2, with peptide sequence VTPNDDTFDPFR, showed the best response in enzyme-linked immunosorbent assay (ELISA) in terms of sensitivity and reproducibility and was selected for microarray development. A biotinylated synthetic derivative of this mimotope was immobilized onto epoxy-glass slides, and fumonisin B1 was detected in a competitive binding inhibition assay using the antifumonisin antibody and a labeled secondary antibody. The array showed an IC50 value of 37.1 ± 2.4 ng mL-1 (n = 9), a detection limit of 11.1 ng mL-1, and a dynamic range from 17.3 to 79.6 ng mL-1. Good specificity toward fumonisin B1 and its structural analog, fumonisin B2, was observed, together with negligible cross-reactivity for other mycotoxins produced by the same fungi species. The mimotope microarray was applied to the analysis of fumonisin B1 in spiked maize and wheat samples. The method enabled quantification of the mycotoxin at the levels set by European legislation and holds promise for future adaptation to include other mycotoxins for multiplex detection.
Assuntos
Ensaio de Imunoadsorção Enzimática , Fumonisinas/análise , Análise Serial de Proteínas , Triticum/química , Zea mays/químicaRESUMO
Measurement of changes of pH at various intracellular compartments has potential to solve questions concerning the processing of endocytosed material, regulation of the acidification process, and also acidification of vesicles destined for exocytosis. To monitor these events, the nanosized optical pH probes need to provide ratiometric signals in the optically transparent biological window, target to all relevant intracellular compartments, and to facilitate imaging at subcellular resolution without interference from the biological matrix. To meet these criteria we sensitize the surface conjugated pH sensitive indicator via an upconversion process utilizing an energy transfer from the nanoparticle to the indicator. Live cells were imaged with a scanning confocal microscope equipped with a low-energy 980 nm laser excitation, which facilitated high resolution and penetration depth into the specimen, and low phototoxicity needed for long-term imaging. Our upconversion nanoparticle resonance energy transfer based sensor with polyethylenimine-coating provides high colloidal stability, enhanced cellular uptake, and distribution across cellular compartments. This distribution was modulated with membrane integrity perturbing treatment that resulted into total loss of lysosomal compartments and a dramatic pH shift of endosomal compartments. These nanoprobes are well suited for detection of pH changes in in vitro models with high biological background fluorescence and in in vivo applications, e.g., for the bioimaging of small animal models.
Assuntos
Microscopia Confocal , Nanopartículas/química , Polietilenoimina/química , Linhagem Celular Tumoral , Fluoretos/química , Humanos , Concentração de Íons de Hidrogênio , Nanopartículas/metabolismo , Fótons , Espectrofotometria , Ítrio/químicaRESUMO
Plant-pathogenic Fusarium species, Fusarium verticillioides and Fusarium proliferatum, are the major producers of fumonisins which are one of the most common mycotoxins found in maize. Herein, we report the development of specific and sensitive genosensors for detecting these two closely related Fusarium species in food samples. The sensors are based on species-specific capture and detection probes, which bind to the intergenic spacer region of rDNA (IGS). Oligonucleotide functionalized magnetic microbeads are used to capture the target DNA which is then detected using biotinylated detection probes and a streptavidin-coupled label. The developed genosensors had detection limits of 1.8 pM and 3.0 pM for F. proliferatum and F. verticillioides, respectively, using synthetic DNA targets. Furthermore, the biosensors were used to analyze natural fungal contamination of commercial maize samples. After amplification of the genomic DNA the sensors detected the presence of the fungi, in accordance with previous results obtained with PCR. No cross-reactivity between F. verticillioides and F. proliferatum, or other fungi species tested, was observed. The developed biosensors can provide a valuable tool to evaluate the potential for mycotoxin contamination in conditions where detection of mycotoxins directly is challenging.
Assuntos
Técnicas Biossensoriais , DNA Fúngico/análise , Contaminação de Alimentos/análise , Fusarium/química , Micotoxinas/análise , Especificidade da Espécie , Zea mays/química , Zea mays/microbiologiaRESUMO
Bacteriophage-based bioassays are a promising alternative to traditional antibody-based immunoassays. Bacteriophages, shortened to phages, can be easily conjugated or genetically engineered. Phages are robust, ubiquitous in nature, and harmless to humans. Notably, phages do not usually require inoculation and killing of animals; and thus, the production of phages is simple and economical. In recent years, phage-based biosensors have been developed featuring excellent robustness, sensitivity, and selectivity in combination with the ease of integration into transduction devices. This review provides a critical overview of phage-based bioassays and biosensors developed in the last few years using different interrogation methods such as colorimetric, enzymatic, fluorescence, surface plasmon resonance, quartz crystal microbalance, magnetoelastic, Raman, or electrochemical techniques.
Assuntos
Bacteriófagos/metabolismo , Técnicas Biossensoriais/métodos , Técnicas de Visualização da Superfície Celular/métodos , Animais , Bacteriófagos/química , Bacteriófagos/genética , Técnicas Biossensoriais/instrumentação , Técnicas de Visualização da Superfície Celular/instrumentação , Desenho de Equipamento , Engenharia Genética/métodos , Humanos , Ressonância de Plasmônio de Superfície , TransdutoresRESUMO
We have studied the mechanisms of water-based quenching of the upconversion photoluminescence of upconverting nanophosphors (UCNPs) via luminescence decay measurements for a better understanding of the non-radiative deactivation pathways responsible for the relatively low upconversion luminescence efficiency in aqueous solutions. This included both upconversion luminescence measurements and the direct excitation of emissive energy states of Er(3+) and Yb(3+) dopants in NaYF4:Yb(3+),Er(3+) UCNPs by measuring the decays at 550 and 655 nm upon 380 nm excitation and at 980 nm upon 930 nm excitation, respectively. The luminescence intensities and decays were measured from both bare and silanized NaYF4:Yb(3+),Er(3+) and NaYF4:Yb(3+),Tm(3+) UCNPs in H2O and D2O. The measurements revealed up to 99.9% quenching of the upconversion photoluminescence intensity of both Er(3+) and Tm(3+) doped bare nanophosphors by water. Instead of the multiphonon relaxation of excited energy levels of the activators, the main mechanism of quenching was found to be the multiphonon deactivation of the Yb(3+) sensitizer ion caused by OH-vibrations on the surface of the nanophosphor. Due to the nonlinear nature of upconversion, the quenching of Yb(3+) has a higher order effect on the upconversion emission intensity with the efficient Yb-Yb energy migration in the â¼35 nm nanocrystals making the whole nanophosphor volume susceptible to surface quenching effects. The study underlines the need of efficient surface passivation for the use of UCNPs as labels in bioanalytical applications performed in aqueous solutions.
RESUMO
A generic, cost-effective, and simple method has been developed to fingerprint liquids to differentiate food brands and ingredients. The method is based on a label array using nonspecific long lifetime unstable luminescent lanthanide labels. The interaction between the liquid sample and the label is typically detrimental to the luminescence of the unstable chelate leading to a sample-dependent luminescence-intensity array. The label-array method is a unique approach as the array of unstable chelates is extremely inexpensive to produce and possesses high sensitivity due to spectral as well as unstable structural properties of the lanthanide label. The global method has been applied to distinguish commercial honey and cacao brands to demonstrate its feasibility as honey and cacao are among the most adulterated food products.
Assuntos
Cacau/química , Contaminação de Alimentos/análise , Mel/análise , Elementos da Série dos Lantanídeos/análiseRESUMO
The use of oligonucleotide-protein conjugates enables the development of novel types of bioanalytical assays. However, convenient methods for producing covalent and stoichiometric oligonucleotide-protein conjugates are still rare. Here we demonstrate, for the first time, covalent conjugation of DNA oligonucleotide to Fab fragments with a 1:1 ratio using HaloTag self-labeling technology. The oligonucleotide coupling was carried out while the Fab was attached to protein G matrix, thereby enabling straightforward production of covalent conjugates. Furthermore, it allowed convenient purification of the product because the unreacted components were easily removed before the elution of the high-purity conjugate. The prepared conjugate was employed in a homogeneous immunoassay where prostate-specific antigen was used as a model analyte. Switchable lanthanide luminescence was used for detection, and the obtained limit of detection was 0.27 ng/ml. In the future, the developed method for covalent conjugation and successive purification in protein G column could also be applied for introducing other kinds of modifications to Fab fragments in a simple and site-specific manner.