In vivo prostate cancer detection and grading using restriction spectrum imaging-MRI.

BACKGROUND: Magnetic resonance imaging (MRI) is emerging as a robust, noninvasive method for detecting and characterizing prostate cancer (PCa), but limitations remain in its ability to distinguish cancerous from non-cancerous tissue. We evaluated the performance of a novel MRI technique, restriction spectrum imaging (RSI-MRI), to quantitatively detect and grade PCa compared with current standard-of-care MRI. METHODS: In a retrospective evaluation of 33 patients with biopsy-proven PCa who underwent RSI-MRI and standard MRI before radical prostatectomy, receiver-operating characteristic (ROC) curves were performed for RSI-MRI and each quantitative MRI term, with area under the ROC curve (AUC) used to compare each term's ability to differentiate between PCa and normal prostate. Spearman rank-order correlations were performed to assess each term's ability to predict PCa grade in the radical prostatectomy specimens. RESULTS: RSI-MRI demonstrated superior differentiation of PCa from normal tissue, with AUC of 0.94 and 0.85 for RSI-MRI and conventional diffusion MRI, respectively (P=0.04). RSI-MRI also demonstrated superior performance in predicting PCa aggressiveness, with Spearman rank-order correlation coefficients of 0.53 (P=0.002) and -0.42 (P=0.01) for RSI-MRI and conventional diffusion MRI, respectively, with tumor grade. CONCLUSIONS: RSI-MRI significantly improves upon current noninvasive PCa imaging and may potentially enhance its diagnosis and characterization.

Novel technique for characterizing prostate cancer utilizing MRI restriction spectrum imaging: proof of principle and initial clinical experience with extraprostatic extension.

BACKGROUND: Standard magnetic resonance imaging (MRI) of the prostate lacks sensitivity in the diagnosis and staging of prostate cancer (PCa). To improve the operating characteristics of prostate MRI in the detection and characterization of PCa, we developed a novel, enhanced MRI diffusion technique using restriction spectrum imaging (RSI-MRI). METHODS: We compared the efficacy of our novel RSI-MRI technique with standard MRI for detecting extraprostatic extension (EPE) among 28 PCa patients who underwent MRI and RSI-MRI prior to radical prostatectomy, 10 with histologically proven pT3 disease. RSI cellularity maps isolating the restricted isotropic water fraction were reconstructed based on all b-values and then standardized across the sample with z-score maps. Distortion correction of the RSI maps was performed using the alternating phase-encode technique. RESULTS: 27 patients were evaluated, excluding one patient where distortion could not be performed. Preoperative standard MRI correctly identified extraprostatic the extension in two of the nine pT3 (22%) patients, whereas RSI-MRI identified EPE in eight of nine (89%) patients. RSI-MRI correctly identified pT2 disease in the remaining 18 patients. CONCLUSIONS: In this proof of principle study, we conclude that our novel RSI-MRI technology is feasible and shows promise for substantially improving PCa imaging. Further translational studies of prostate RSI-MRI in the diagnosis and staging of PCa are indicated.

Reduction of spectral interferences using ultraclean gold nanowire arrays in the LDI-MS analysis of a model peptide.

The surface chemistry of gold nanowires (AuNWs) has been systematically assessed in terms of contamination and cleaning processes. The nanomaterial's surface quality was correlated to its performance in the matrix-free laser desorption ionization mass spectrometry (LDI-MS) analysis of low molecular weight analytes. Arrays of AuNWs were deposited on glass slides by means of the lithographically patterned nanowire electrodeposition technique. AuNWs were then characterized in terms of surface chemical composition and morphology using X-ray photoelectron spectroscopy, scanning electron microscopy and atomic force microscopy. AuNWs were subjected to a series of well-known cleaning procedures with the aim of producing the best performing surfaces for the LDI-MS detection of leucine enkephalin, chosen as a model analyte with a molar mass below 1,000 g/mol. Prolonged cyclic voltammetry in 2 M sulfuric acid and, most of all, oxygen plasma cleaning for 5 min provided the best results in terms of simpler (interference-free) and more intense mass spectrometry spectra of the reference compound. The analyte always ionized as the sodiated adduct, and leucine enkephalin limits of detection of 0.5 and 2.5 pmol were estimated for the positive and negative analysis modes, respectively. This study points out the tight correlation existing between the chemical status of the nanostructure surface and the AuNW-assisted LDI-MS performance in terms of reproducibility of spectra, intensity of analyte ions and reduction of interferences.

Topological classification and enumeration of RNA structures by genus.

To an RNA pseudoknot structure is naturally associated a topological surface, which has its associated genus, and structures can thus be classified by the genus. Based on earlier work of Harer-Zagier, we compute the generating function Dg,σ (z) = ∑n dg,σ (n)zn for the number dg,σ (n) of those structures of fixed genus g and minimum stack size σ with n nucleotides so that no two consecutive nucleotides are basepaired and show that Dg,σ (z) is algebraic. In particular, we prove that dg,2(n) ∼ kg n3(g−1/2 )γ n2, where γ2 ≈ 1.9685. Thus, for stack size at least two, the genus only enters through the sub-exponential factor, and the slow growth rate compared to the number of RNA molecules implies the existence of neutral networks of distinct molecules with the same structure of any genus. Certain RNA structures called shapes are shown to be in natural one-to-one correspondence with the cells in the Penner-Strebel decomposition of Riemann's moduli space of a surface of genus g with one boundary component, thus providing a link between RNA enumerative problems and the geometry of Riemann's moduli space.

Monitoring of hemodynamic changes induced in the healthy breast through inspired gas stimuli with MR-guided diffuse optical imaging.

PURPOSE: The modulation of tissue hemodynamics has important clinical value in medicine for both tumor diagnosis and therapy. As an oncological tool, increasing tissue oxygenation via modulation of inspired gas has been proposed as a method to improve cancer therapy and determine radiation sensitivity. As a radiological tool, inducing changes in tissue total hemoglobin may provide a means to detect and characterize malignant tumors by providing information about tissue vascular function. The ability to change and measure tissue hemoglobin and oxygenation concentrations in the healthy breast during administration of three different types of modulated gas stimuli (oxygen/ carbogen, air/carbogen, and air/oxygen) was investigated. METHODS: Subjects breathed combinations of gases which were modulated in time. MR-guided diffuse optical tomography measured total hemoglobin and oxygen saturation in the breast every 30 s during the 16 min breathing stimulus. Metrics of maximum correlation and phase lag were calculated by cross correlating the measured hemodynamics with the stimulus. These results were compared to an air/air control to determine the hemodynamic changes compared to the baseline physiology. RESULTS: This study demonstrated that a gas stimulus consisting of alternating oxygen/carbogen induced the largest and most robust hemodynamic response in healthy breast parenchyma relative to the changes that occurred during the breathing of room air. This stimulus caused increases in total hemoglobin and oxygen saturation during the carbogen phase of gas inhalation, and decreases during the oxygen phase. These findings are consistent with the theory that oxygen acts as a vasoconstrictor, while carbogen acts as a vasodilator. However, difficulties in inducing a consistent change in tissue hemoglobin and oxygenation were observed because of variability in intersubject physiology, especially during the air/oxygen or air/carbogen modulated breathing protocols. CONCLUSIONS: MR-guided diffuse optical imaging is a unique tool that can measure tissue hemodynamics in the breast during modulated breathing. This technique may have utility in determining the therapeutic potential of pretreatment tissue oxygenation or in investigating vascular function. Future gas modulation studies in the breast should use a combination of oxygen and carbogen as the functional stimulus. Additionally, control measures of subject physiology during air breathing are critical for robust measurements.

The use of infliximab for treatment of hospitalized patients with acute severe ulcerative colitis.

BACKGROUND/AIM: The use of infliximab in severe ulcerative colitis (UC) is established; however, its role in severe acute UC requires clarification. The present multicentre case series evaluated infliximab in hospitalized patients with steroid-refractory severe UC. METHODS: Patients from six hospitals were retrospectively evaluated. Data collection included demographics, duration of disease and previous treatments. The primary end point was response to in-hospital infliximab; defined as discharge without colectomy. RESULTS: Twenty-one patients (median age 26 years) were admitted between May 2006 and May 2008 with severe UC requiring intravenous steroids and given infliximab (median time to infusion eight days). Sixteen (76%) patients were discharged home without colectomy; three of these underwent colectomy at a later date. Of the remaining 13 patients (62%), all but two did not require further courses of steroids; six patients had infliximab as a bridge to azathioprine and seven patients were maintained on regular infliximab. Five patients required in-hospital colectomy after the initial infliximab. CONCLUSIONS: In this real-life experience of infliximab in patients with steroid-refractory severe UC, infliximab appears to be a viable rescue therapy. The majority of patients were discharged without surgery and 62% maintained response either as a bridge to azathioprine or maintenance infliximab.

Synthesis of PbTe nanowire arrays using lithographically patterned nanowire electrodeposition.

We describe the preparation by electrodeposition of arrays of lead telluride (PbTe) nanowires using the lithographically patterned nanowire electrodeposition (LPNE) method. PbTe nanowires had a rectangular cross-section with adjustable width and height ranging between 60-400 nm (w) and 20-100 nm (h). The characterization of these nanowire arrays using X-ray diffraction, transmission electron microscopy and electron diffraction, scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy (XPS) is reported. PbTe nanowires were electrodeposited using a cyclic electrodeposition-stripping technique that produced polycrystalline, stoichiometric, face-centered cubic PbTe with a mean grain diameter of 10-20 nm. These nanowires were more than 1 mm in length and two additional processing steps permitted their suspension across 25 microm air gaps microfabricated on these surfaces. The LPNE synthesis of lithographically patterned PbTe nanowires was carried out in unfiltered laboratory air. Nanowires with lengths of 70-100 microm showed an electrical resistivity comparable to bulk PbTe. XPS reveals that exposure of PbTe nanowires to air causes the formation on the nanowire surface of approximately one monolayer of a mixed lead oxide and tellurium oxide within a few minutes.

Review and clinical perspectives for the use of infliximab in ulcerative colitis.

Infliximab is a chimeric, monoclonal anti-tumour necrosis factor-alpha antibody. It has been previously demonstrated to be an effective treatment for patients with Crohn's disease who do not achieve the desired response with conventional treatments. Although the etiology of ulcerative colitis (UC) differs from that of Crohn's disease, randomized controlled trials have demonstrated that infliximab is also beneficial for the treatment of moderate to severe UC in patients who are either intolerant of or refractory to immunosuppressant agents or steroids, or those who are steroid-dependent. A review of the literature is followed by practical recommendations regarding infliximab that address the needs of clinicians and UC patients. Where there is a lack of evidence-based information, the expert panel provides its combined opinion derived from the members' clinical experiences.

Electrodeposited submicron thermocouples with microsecond response times.

We describe a procedure for preparing submicron scale silver-nickel thermocouples (TCs) using electrochemical step edge decoration on graphite surfaces. Each fabrication operation produced ensembles of 2-20 TCs with diameters in the 1.0 microm to 500 nm range. These "sub-mum TCs" (SMTCs) produced linear voltage versus temperature output over the range from 20 to 100 degrees C characterized by a Seebeck coefficient of 20 +/- 1 microV/degrees C, equal to the 21 microV/degrees C that is theoretically expected for a junction between these two metals. The time response of SMTCs was evaluated using two different laser-heating methods and compared with the smallest mechanically robust commercially available type J TCs. Electrochemical etching of the silver wire introduced constrictions at grain boundaries that reduced the thermal mass of the junction without altering its integrity or its overall diameter, producing a decrease of the measured rise time for SMTCs up to 96%.

Physical vapor deposition of one-dimensional nanoparticle arrays on graphite: seeding the electrodeposition of gold nanowires.

One-dimensional (1D) ensembles of 2-15 nm diameter gold nanoparticles were prepared using physical vapor deposition (PVD) on highly oriented pyrolytic graphite (HOPG) basal plane surfaces. These 1D Au nanoparticle ensembles (NPEs) were prepared by depositing gold (0.2-0.6 nm/s) at an equivalent thickness of 3-4 nm onto HOPG surfaces at 670-690 K. Under these conditions, vapor-deposited gold nucleated selectively at the linear step edge defects present on these HOPG surfaces with virtually no nucleation of gold particles on terraces. The number density of 2-15 nm diameter gold particles at step edges was 30-40 microm-1. These 1D NPEs were up to a millimeter in length and organized into parallel arrays on the HOPG surface, following the organization of step edges. Surprisingly, the deposition of more gold by PVD did not lead to the formation of continuous gold nanowires at step edges under the range of sample temperature or deposition flux we have investigated. Instead, these 1D Au NPEs were used as nucleation templates for the preparation by electrodeposition of gold nanowires. The electrodeposition of gold occurred selectively on PVD gold nanoparticles over the potential range from 700-640 mV vs SCE, and after optimization of the electrodeposition parameters continuous gold nanowires as small as 80-90 nm in diameter and several micrometers in length were obtained.

The Mg2+ and Mg(2+)-nucleotide-regulated channel-kinase TRPM7.

TRPM7 is a member of the melastatin-related subfamily of TRP channels and represents a protein that contains both an ion channel and a kinase domain. The protein is ubiquitously expressed and represents the only ion channel known that is essential for cellular viability. TRPM7 is a divalent cation-selective ion channel that is permeable to Ca2+ and Mg2+, but also conducts essential metals such as Zn2+, Mn2+, and Co2+, as well as nonphysiologic or toxic metals such as Ni2+, Cd2+, Ba2+, and Sr2+. The channel is constitutively open but strongly downregulated by intracellular levels of Mg2+ and MgATP and other Mg-nucleotides. Reducing the cellular levels of these regulators leads to activation of TRPM7-mediated currents that exhibit a characteristic nonlinear current-voltage relationship with pronounced outward rectification due to divalent influx at physiologically negative voltages and monovalent outward fluxes at positive voltages. TRPM7 channel activity is also actively regulated following receptor-mediated changes in cyclic AMP (cAMP) and protein kinase A activity. This regulation as well as that by Mg-nucleotides requires a functional endogenous kinase domain. The function of the kinase domain is not completely understood, but may involve autophosphorylation of TRPM7 as well as phosphorylation of other target proteins such as annexin and myosin IIA heavy chain. Based on these properties, TRPM7 is currently believed to represent a ubiquitous homeostatic mechanism that regulates Ca2+ and Mg2+ fluxes based on the metabolic state of the cell. Physiologically, the channel may serve as a regulated transport mechanism for these ions that could affect cell adhesion, cell growth and proliferation, and even cell death under pathological stress such as anoxia.

Bismuth telluride (Bi2Te3) nanowires: synthesis by cyclic electrodeposition/stripping, thinning by electrooxidation, and electrical power generation.

Nanowires composed of the thermoelectric material Bi2Te3 were synthesized on highly oriented pyrolytic graphite (HOPG) electrodes using the electrochemical step edge decoration (ESED) method. Nanowire synthesis was initiated by applying a voltage pulse of -0.75 V versus SCE for 5 ms to an HOPG electrode in an aqueous solution containing both Bi3+ and TeO22-, thereby producing nuclei at the step edges. Bi2Te3 was electrodeposited onto these nuclei using a cyclic electrodeposition-stripping scheme that involved the electrodeposition of bismuth-rich Bi2Te3 on a negative-going voltammetric scan (to -0.05 V) and the subsequent anodic stripping of excess bismuth from these nanowires during a positive-going scan (to +0.35 V). When this cycle was repeated 10-50 times, Bi2Te3 nanowires in the 100-300-nm-diameter range were obtained. These nanowires were narrowly dispersed in diameter (RSDdia = 10-20%), were more than 100 microm in length, and were organized into parallel arrays containing hundreds of wires. Smaller nanowires, with diameters down to 30 nm, were obtained by electrooxidizing 150-nm-diameter Bi2Te3 nanowires at +0.37 V under conditions of kinetic control. This oxidation process unexpectedly improved the uniformity of Bi2Te3 nanowires, and X-ray photoelectron spectroscopy (XPS) shows that these nanowires retain a Bi2Te3 core but also have a thin surface layer composed of Bi and Te oxides. The ability of Bi2Te3 nanowires to generate electrical power was assessed by transferring ensembles of these nanowires onto cyanoacrylate-coated glass surfaces and evaporating 4-point nickel contacts. A dimensionless figure of merit, ZT, ranging from 0 to 0.85 was measured for fresh samples that were less than 1 day old. XPS reveals that Bi2Te3 nanowires are oxidized within a week to Bi2O3 and TeO2. These oxides may interfere with the application by evaporation of electrical contacts to these nanowires.

Lithographically patterned nanowire electrodeposition.

Nanowire fabrication methods can be classified either as 'top down', involving photo- or electron-beam lithography, or 'bottom up', involving the synthesis of nanowires from molecular precursors. Lithographically patterned nanowire electrodeposition (LPNE) combines attributes of photolithography with the versatility of bottom-up electrochemical synthesis. Photolithography defines the position of a sacrificial nickel nanoband electrode, which is recessed into a horizontal trench. This trench acts as a 'nanoform' to define the thickness of an incipient nanowire during its electrodeposition. The electrodeposition duration determines the width of the nanowire. Removal of the photoresist and nickel exposes a polycrystalline nanowire--composed of gold, platinum or palladium--characterized by thickness and width that can be independently controlled down to 18 and 40 nm, respectively. Metal nanowires prepared by LPNE may have applications in chemical sensing and optical signal processing, and as interconnects in nanoelectronic devices.

CRACM1 is a plasma membrane protein essential for store-operated Ca2+ entry.

Store-operated Ca2+ entry is mediated by Ca2+ release-activated Ca2+ (CRAC) channels following Ca2+ release from intracellular stores. We performed a genome-wide RNA interference (RNAi) screen in Drosophila cells to identify proteins that inhibit store-operated Ca2+ influx. A secondary patch-clamp screen identified CRACM1 and CRACM2 (CRAC modulators 1 and 2) as modulators of Drosophila CRAC currents. We characterized the human ortholog of CRACM1, a plasma membrane-resident protein encoded by gene FLJ14466. Although overexpression of CRACM1 did not affect CRAC currents, RNAi-mediated knockdown disrupted its activation. CRACM1 could be the CRAC channel itself, a subunit of it, or a component of the CRAC signaling machinery.

Shrinking nanowires by kinetically controlled electrooxidation.

Nanowires composed of antimony, gold, and bismuth telluride (Bi2Te3) were reduced in diameter by electrooxidation in aqueous solutions. When electrooxidation was carried out using low current densities (Jox < 150 microA cm(-2)), the mean wire diameter decreased in direct proportion to the oxidation time, as expected for a kinetically controlled process. Under these conditions, the diameter uniformity of nanowires remained constant as wires were shrunk from initial diameters of more than 120 nm to less than 40 nm, for Sb and Bi2Te3, and less than 60 nm for Au. Oxidized nanowires remained continuous for more than 100 microm. Electrooxidation at higher current densities rapidly introduced breaks into these nanowires. Electrochemical wire growth and shrinking by electrooxidation were integrated into a single electrochemical experiment that allowed the final mean diameter of nanowires to be specified with a precision of 5-10 nm.

Shape- and size-selective electrochemical synthesis of dispersed silver(I) oxide colloids.

Silver(I) oxide (Ag2O) micro- and nanoparticles were electrochemically synthesized by anodizing a sacrificial silver wire in a basic aqueous sulfate solution. Ag2O particles were released from the silver electrode surface during synthesis producing a visible sol "stream". The composition of these particles was established using selected area electron diffraction, X-ray diffraction, and X-ray photoelectron spectroscopy. The shape of Ag2O crystallites could be adjusted using the potential of the silver wire generator electrode. The generation of a dispersed Ag2O sol and the observed shape selectivity are both explained by a two-step mechanism involving the anodic dissolution of silver metal, Ag0 --> Ag+(aq) + 1e-, followed by the precipitation of Ag2O particles, 2Ag+ + 2OH- --> Ag2O(s) + H2O. Within 100 mV of the voltage threshold for particle growth, cubic particles with a depression in each face ("hopper crystals") were produced. The application of more positive voltages resulted in the generation of 8-fold symmetric "flower"-shaped particles formed as a consequence of fast growth in the <111> crystallographic direction. The diameter of flower particles was adjustable from 250 nm to 1.8 microm using the growth duration at constant potential.

Reversible resistance modulation in mesoscopic silver wires induced by exposure to amine vapor.

Ensembles of silver nanowires (AgNEs) with diameters ranging from 200 nm to 1.0 microm have been prepared by electrochemical step edge decoration. These AgNEs showed a rapid (< 5 s), reversible increase in resistance upon exposure to the vapor of ammonia, trimethylamine, and pyridine. The amplitude of the resistance change was up to +3000% (DeltaR/Ro)-more than 2 orders of magnitude larger than can be explained based on boundary layer scattering effects. We experimentally probe the mechanism for this resistance modulation in the case of ammonia, and we propose a model to describe it. Conductive tip atomic force microscopy was used to probe individual sections of nanowires in AgNEs; these data revealed that the resistance change caused by NH(3) exposure was concentrated within a minority (approximately 10%) of the 5-microm wire segments that were probed--not uniformly distributed along each nanowire. All AgNEs showed a temperature dependence of their resistance, alpha, that was smaller than expected for silver metal. Highly sensitive AgNEs sometimes showed a negative alpha, characteristic of semiconductors, but negative alpha values were never observed for AgNEs with a low sensitivity to NH3. AgNEs did not respond to hydrocarbons, O2, H2O, N2, CO, or Ar, but a large (DeltaR/Ro > |-50%|) irreversible decrease in resistance was seen upon exposures to acids including HCl, HNO3, and H2SO4. Based on these and other data, we propose a model in which oxidized constrictions in silver nanowires limit the conductivity of the wire and provide a means for "gating" conduction based on the protonation state of the oxide surface.

Molybdenum disulfide nanowires and nanoribbons by electrochemical/chemical synthesis.

Molybdenum disulfide nanowires and nanoribbons have been synthesized by a two-step, electrochemical/chemical synthetic method. In the first step, MoO(x) wires (a mixture of MoO(2) and MoO(3)) were electrodeposited size-selectively by electrochemical step-edge decoration on a highly oriented pyrolytic graphite (HOPG) surface. Then, MoO(x) precursor wires were converted to MoS(2) by exposure to H(2)S either at 500-700 degrees C, producing "low-temperature" or LT MoS(2) nanowires that were predominantly 2H phase, or above 800 degrees C producing "high-temperature" or HT MoS(2) ribbons that were predominantly 3R phase. The majority of these MoS(2) wires and ribbons were more than 50 microm in length and were organized into parallel arrays containing hundreds of wires or ribbons. MoS(2) nanostructures were characterized by X-ray photoelectron spectroscopy, scanning and transmission electron microscopy, selected area electron diffraction, X-ray diffraction, UV-visible absorption spectrometry, and Raman spectroscopy. HT and LT MoS(2) nanowires were structurally distinct: LT MoS(2) wires were hemicylindrical in shape and nearly identical in diameter to the MoO(x) precursor wires from which they were derived. LT MoS(2) wires were polycrystalline, and the internal structure consisted of many interwoven, multilayer strands of MoS(2); HT MoS(2) ribbons were 50-800 nm in width and 3-100 nm thick, composed of planar crystallites of 3R-MoS(2). These layers grew in van der Waals contact with the HOPG surface so that the c-axis of the 3R-MoS(2) unit cell was oriented perpendicular to the plane of the graphite surface. Arrays of MoS(2) wires and ribbons could be cleanly separated from the HOPG surface and transferred to glass for electrical and optical characterization. Optical absorption measurements of HT MoS(2) nanoribbons reveal a direct gap near 1.95 eV and two exciton peaks, A1 and B1, characteristic of 3R-MoS(2). These exciton peaks shifted to higher energy by up to 80 meV as the wire thickness was decreased to 7 nm (eleven MoS(2) layers). The energy shifts were proportional to 1/ L( parallel)(2), and the effective masses were calculated. Current versus voltage curves for both LT and HT MoS(2) nanostructures were probed as a function of temperature from -33 degrees C to 47 degrees C. Conduction was ohmic and mainly governed by the grain boundaries residing along the wires. The thermal activation barrier was found to be related to the degree of order of the crystallites and can be tuned from 126 meV for LT nanowires to 26 meV for HT nanoribbons.

Multimode detection of hydrogen gas using palladium-covered silicon micro-channels.

Palladium was electrodeposited onto lithographically patterned Si(100) "micro-channels" with dimensions of 2 microm (width) x 100 microm (length). The properties of these Pd-covered Si micro-channels for detecting dihydrogen gas were then evaluated. Pd electrodeposition was carried out under conditions favoring an instantaneous nucleation and growth mechanism. This strategy produced size-similar Pd particles at a coverage of (4-6) x 10(9) cm(-2) within the confines of the Si micro-channel. When the mean particle radius, ro, was smaller than a critical value (ro < rc = 70-85 nm), each Pd particle was well separated on the surface from adjacent particles, on average, and no response to H2 gas attributable to the micro-channel was observed. As Pd particles were grown larger, to a mean radius of ro approximately equal to rc, adjacent particles on the surface touched and the electrical resistance of the micro-channel dropped by several orders of magnitude. These "type 2" H2 sensors exhibited a rapid (< 1 s), reversible decrease in their resistance in response to exposure to H2 above 0.5%, but a minimum resistance was observed at 1-2%, and a resistance increase was seen at higher H2 concentration. This complex behavior resulted from the existence of three mechanisms for charge transport across the micro-channel. If still larger quantities of Pd were deposited, the Pd particle ensemble coalesced into an electrically continuous film. These "type 3" sensors became more resistive in the presence of H2, not more conductive as seen for sensors of types 1 and 2, but the amplitude of this response was smaller than seen for type 2 sensors.

Palladium mesowire arrays for fast hydrogen sensors and hydrogen-actuated switches.

Arrays of mesoscopic palladium wires prepared by electrodeposition form the basis for hydrogen sensors and hydrogen-actuated switches that exhibit a response time ranging from 20 ms to 5 s, depending on the hydrogen concentration. These devices were constructed by electrodepositing palladium mesowires on a highly oriented pyrolytic graphite surface and then transferring these mesowires to a cyanoacrylate film supported on a glass slide. The application of silver contacts to the ends of 10-100 mesowires, arrayed electrically in parallel, produced sensors and switches that exhibited a high conductivity state in the presence of hydrogen and a low conductivity state in the absence of hydrogen. After an initial exposure to hydrogen, 15-50 nanoscopic gaps are formed in each mesowire. These nanoscopic gaps or "break junctions" close in the presence of hydrogen gas and reopen in its absence as hydrogen is reversibly occluded by the palladium grains in each wire, and the palladium lattice expands and contracts by several percent. The change in resistance for sensors and switches was related to the hydrogen concentration over a range from 1 to 10%.