RESUMO
Levoglucosan (LGA) is a promising chemical platform derived from the pyrolysis of biomass that offers access to a variety of value-added products. We report an efficient route to produce LGA via the pretreatment of biomass with niobium compounds (oxalate, chloride and oxide) followed by fast pyrolysis coupled with gas chromatography-mass spectrometry (Py-GC-MS) at temperatures of 350-600 °C. Catalytic pretreatment reduces the quantity of lignin in the biomass, concentrates the cellulose and enhance LGA formation during fast pyrolysis. The pretreatment also removes alkaline metals, preventing competitive side reactions. The effect of several parameters such as catalyst weight, time, temperature, and solvent, with the optimal pretreatment conditions determined to be 3 (wt.%) niobium oxalate for 1 h at 23 °C in water. Pretreatment increased the LGA yields by 6.40-fold for sugarcane bagasse, 4.15-fold for elephant grass, 4.13-fold for rice husk, 2.86-fold for coffee husk, and 1.86-fold for coconut husk as compared to the raw biomasses. These results indicate that biomass pretreatment using niobium derivates prior fast pyrolysis can be a promising technique for biomass thermochemical conversion in LGA and others important pyrolytic products.
Assuntos
Nióbio , Pirólise , Biomassa , Glucose/análogos & derivados , Temperatura Alta , LigninaRESUMO
The aim of this work was to evaluate simultaneously the effect of produced ethanolic biodiesel from several feedstocks (soybean, crambe, macaw, sunflower, and waste cooking oil) and engine operational conditions (low and high engine speed) during combustion of biodiesel/diesel blends on the N2O, NOx, NO, CO2, and CO emission levels in the atmosphere. The biodiesel samples were prepared in one and/or two reaction steps, according to the acid index of each raw material, by esterification using H2SO4 and/or chemical transesterification using sodium ethoxide, both, through ethanolic route. The quality of the produced biodiesels was confirmed by ASTM/EN specifications. Then, biodiesel/diesel blends were prepared according to the following proportions: 10% (B10), 15% (B15), 25% (B25), and 50% (B50). In general way, all raw materials under combustion at low and high engine speed contributed to the formation of NOx and this effect was more drastically increased as the biodiesel concentration in the blends increases. N2O presented a similar behavior except for blends containing crambe and macaw biodiesel whose emissions were slightly reduced as a function of biodiesel content in these blends. Then, Principal component analysis (PCA) was applied to discriminate the effect of engine operating conditions, biodiesel kind, and biodiesel content in the blends during their combustion on the exhaust emissions. The attained results point to crambe and macaw as more environmentally sustainable feedstocks for biodiesel production because they generate less greenhouse gas emissions. These results are particularly attractive considering that, both, crambe and macaw are non-edible feedstocks with great potential for biodiesel production.
Assuntos
Poluentes Atmosféricos/análise , Atmosfera/química , Biocombustíveis/análise , Monitoramento Ambiental , Emissões de Veículos/análise , Esterificação , Etanol/análogos & derivados , Gases de Efeito EstufaRESUMO
The aim of the present study was to assess the drying kinetic of tucum fruits (epicarp and mesocarp) Astrocaryum aculeatum Meyer at three different temperatures (50, 60, and 70 °C). The physicochemical characterization, water activity, moisture content, including ß-carotene and vitamin C content in-natura and dried fruits were analyzed. The fruit fractions presented high ß-carotene, protein and lipid levels. Fatty acid profile showed oleic acid as the major fatty acid. Different mathematical models were computed to assess the drying process. The Page model was observed to be the best to describe the drying kinetic with the highest correlation coefficient (R2) 0.99 and the least Chi squared (χ2) close to 105 at the studied temperatures. The drying process reduced water activity to desirable levels in all trials and ß-carotene retentions after drying remained at satisfactory levels, fact that resulted in minimum value of 63% and approximately 94% in some cases. Vitamin C retention was comparatively more around 20-40% compared to control.
RESUMO
The aim of this work was to improve sugarcane bagasse thermochemical conversion to pyrolytic sugars production, particularly to levoglucosan. The experiments were carried out evaluating the effect of acid washing with HNO3 (0.1wt.%) followed by H2SO4 addition (0.1, 0.2 and 0.3wt.%) at pyrolysis temperatures of 350, 400, 450, 500, 550 and 600°C was studied by Py-GC/MS. The experimental results showed that HNO3 washing, followed by H2SO4 concentration of 0.2wt.% at 350°C resulted in an increase in levoglucosan yield between 5 and 7 times the yield obtained when the raw bagasse was processed. Thus, these results are very attractive to improve pyrolytic sugars production in sugarcane bagasse by previously acid treatment to pyrolysis technology.
Assuntos
Celulose/química , Ácido Nítrico/química , Saccharum/química , Ácidos Sulfúricos/química , Glucose/análogos & derivados , Glucose/química , TemperaturaRESUMO
This paper reports on a study of the influence of sodium alginate concentration and iron addition on the ion exchange kinetics of calcium alginate ferrogel beads produced by external gelation. The calcium absorption and sodium release of the beads were fitted to Fick's second law for unsteady state diffusion in order to obtain the effective diffusion coefficients of Na(+) and Ca(2+). The dried beads were characterized concerning their thermal stability, particle size distribution and morphology. The gelation kinetics showed that an increase in alginate concentration from 1% to 2% increased the Ca(2+) equilibrium concentration, but presented no effect on Ca(2+) effective diffusion coefficient. Alginate concentration higher than 2% promoted saturation of binding sites at the bead surfaces. The addition of iron promoted faster diffusion of Ca(2+) inside the gel beads and reduced the Ca(2+) equilibrium concentration. Also, iron particles entrapped in the alginate gel beads promoted greater absorption of water compared to pure alginate gel and lower thermal stability of the beads. The main diffusion of Ca(2+) into and Na(+) out from the bead took place during the first 60 min, during which almost 85-90% of the Ca(2+) equilibrium concentration is achieved, indicating that this period is sufficient to produce a Ca-alginate bead with high crosslinking of the polymer network.
Assuntos
Alginatos/química , Troca Iônica , Fenômenos Magnéticos , Alginatos/farmacocinética , Cálcio/química , Ácido Glucurônico/química , Ácido Glucurônico/farmacocinética , Ácidos Hexurônicos/química , Ácidos Hexurônicos/farmacocinética , Ferro/química , Tamanho da Partícula , Polímeros/química , Sódio/química , Termogravimetria/métodosRESUMO
Six fungi strains (M. anisopliae 3935, 4516, 4819, PL57, PL43 and M. flavoviride CG291) were studied regarding their ability to produce an anticancer indolizidine alkaloid. The culture process was carried out in Shaken flask at 26ºC and 200 rpm using three different culture medium containing oat meal extract supplemented with glucose and DL-lysine or Czapek culture medium. The mycelial extracts produced by Metarhizium spp. cultures were directly submitted to electrospray ionization mass spectrometry (ESI-MS) analysis and the highest alkaloid concentration (approximately, 6 mg.L-1) was reached when M. anisopliae 3935 was tested.
O presente trabalho teve como objetivo avaliar diferentes cepas dos fungos M. anisopliae e M. flavoviride ao respeito da sua capacidade de produzir um alcalóide anticancerígeno, por fermentação em frascos erlenmeyers usando três meios de cultura distintos. De seis cepas testadas, quatro foram capazes de produzir o composto de interesse, M. anisopliae 3935, PL57 e PL43 e M. flavoviride CG291, sendo que a maior concentração de alcalóide (aproximadamente, 6 mg.L-1) foi produzida pelo M. anisopliae 3935, contendo um meio constituído de extrato de farinha de aveia, glicose e DL-lisina a 26ºC e 200 rpm.
RESUMO
The influence of extremely low-frequency (ELF) electromagnetic fields on Escherichia coli cultures in submerse fermentation was studied. The fermentation processes were carried out recycling the culture medium externally through a stainless steel tube inserted in a magnetic field generator (solenoid). The exposure time and electromagnetic induction were varied in a range of 1 to 12 h and 0.010 to 0.10 T, respectively, according to a Box-Wilson Central Composite Designs of face centered with five central points. Growth of E. coli could be altered (stimulated or inhibited) under magnetic fieldinduced effects. E. coli cultures exposed at 0.1 T during 6.5 h exhibited changes in its viability compared to unexposed cells, which was 100 times higher than the control. The magnetic field generator associated with the cellular suspension recycle is a new way of magnetic treatment in fermentation processes and could be appropriate to industrial scale up.