RESUMO
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO2 emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH2 , and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm-3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).
RESUMO
The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO2 drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02â g cm-3 ), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25-35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32â g g-1 ), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials.
RESUMO
Here, we report the design, synthesis, and functional testing of enzyme-powered porous micromotors built from a metal-organic framework (MOF). We began by subjecting a presynthesized microporous UiO-type MOF to ozonolysis, to confer it with mesopores sufficiently large to adsorb and host the enzyme catalase (size: 6-10 nm). We then encapsulated catalase inside the mesopores, observing that they are hosted in those mesopores located at the subsurface of the MOF crystals. In the presence of H2O2 fuel, MOF motors (or MOFtors) exhibit jet-like propulsion enabled by enzymatic generation of oxygen bubbles. Moreover, thanks to their hierarchical pore system, the MOFtors retain sufficient free space for adsorption of additional targeted species, which we validated by testing a MOFtor for removal of rhodamine B during self-propulsion.
Assuntos
Biocatálise , Catalase/metabolismo , Estruturas Metalorgânicas/química , PorosidadeRESUMO
Herein, we describe a new class of porous composites comprising metal-organic framework (MOF) crystals confined in single spherical matrices made of packed covalent-organic framework (COF) nanocrystals. These MOF@COF composites are synthesized through a two-step method of spray-drying and subsequent amorphous (imine-based polymer)-to-crystalline (imine-based COF) transformation. This transformation around the MOF crystals generates micro- and mesopores at the MOF/COF interface that provide far superior porosity compared to that of the constituent MOF and COF components added together. We report that water sorption in these new pores occurs within the same pressure window as in the COF pores. Our new MOF@COF composites, with their additional pores at the MOF/COF interface, should have implications for the development of new composites.
RESUMO
Herein is reported the preparation of nanostructured mesoporous supported films, in this case, titanium dioxide nanoparticles on silicon wafer, according to a new approach taking place in two consecutive deposition steps: (i) coating of a homogeneous and continuous layer of a surfactant on the selected support and (ii) building up of a second layer of the fresh metal-oxide gel precursor, followed by thermal treatment to generate porosity. This approach represents an alternative way to soft-template procedures, as for instance, the largely applied evaporation-induced self-assembly (EISA) method, which typically consists of a single-step deposition of the mixture of gel precursor and surfactant used as a soft template to create porosity. The main advantage of the procedure reported here compared to the EISA method is the possibility of reaching tunable textural characteristics along the growing film (pore size, shape, and distribution of pores) by using gels with nanoparticles preformed at different stages via a simple regulation of the residence time of the precursors deposited on the support containing the surfactant.
RESUMO
Herein, we exploit the well-known swelling behaviour of metal-organic frameworks (MOFs) to create a self-folding polymer film. Namely, we show that incorporating crystals of the flexible MOF MIL-88A into a polyvinylidene difluoride (PVDF) matrix affords a polymer composite film that undergoes reversible shape transformations upon exposure to polar solvents and vapours. Since the self-folding properties of this film correlate directly with the swelling properties of the MIL-88A crystals, it selectively bends to certain solvents and its degree of folding can be controlled by controlling the relative humidity. Moreover, it shows a shape-memory effect at relative humidity values from 60 % to 90 %. As proof of concept, we demonstrate that these composite films can lift cargo and can be used to assemble 3D structures from 2D patterns. Our strategy is a straightforward method for designing autonomous soft materials with folding properties that can be tuned by judicious choice of the constituent flexible MOF.
RESUMO
Self-assembly of particles into long-range, three-dimensional, ordered superstructures is crucial for the design of a variety of materials, including plasmonic sensing materials, energy or gas storage systems, catalysts and photonic crystals. Here, we have combined experimental and simulation data to show that truncated rhombic dodecahedral particles of the metal-organic framework (MOF) ZIF-8 can self-assemble into millimetre-sized superstructures with an underlying three-dimensional rhombohedral lattice that behave as photonic crystals. Those superstructures feature a photonic bandgap that can be tuned by controlling the size of the ZIF-8 particles and is also responsive to the adsorption of guest substances in the micropores of the ZIF-8 particles. In addition, superstructures with different lattices can also be assembled by tuning the truncation of ZIF-8 particles, or by using octahedral UiO-66 MOF particles instead. These well-ordered, sub-micrometre-sized superstructures might ultimately facilitate the design of three-dimensional photonic materials for applications in sensing.
RESUMO
Here, a two-step method is reported that enables imparting new functionalities to covalent organic frameworks (COFs) by nanoparticle confinement. The direct reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in the presence of a variety of metallic/metal-oxide nanoparticles resulted in embedding of the nanoparticles in amorphous and non-porous imine-linked polymer organic spheres (NP@a-1). Post-treatment reactions of NP@a-1 with acetic acid under reflux led to crystalline and porous imine-based COF-hybrid spheres (NP@c-1). Interestingly, Au@c-1 and Pd@c-1 were found to be catalytically active.
RESUMO
Materials with surfaces that can be switched from high/superhydrophobicity to superhydrophilicity are useful for myriad applications. Herein, we report a metal-organic framework (MOF) assembled from ZnII ions, 1,4-benzenedicarboxylate, and a hydrophobic carborane-based linker. The MOF crystal-surface can be switched between hydrophobic and superhydrophilic through a chemical treatment to remove some of the building blocks.
RESUMO
Herein we report a study on water adsorption/desorption-triggered single-crystal to single-crystal transformations in a MOF, by single-crystal and humidity-controlled powder X-ray diffraction and water-sorption measurements. We identified a gate-opening effect at a relative humidity of 85% upon water adsorption, and a gate-closure effect at a relative humidity of 55 to 77% upon water desorption. This reversible breathing effect between the "open" and the "closed" structures of the MOF involves the cleavage and formation of several coordination bonds.
RESUMO
Biomimetic silica particles can be synthesized as a nanosized material within minutes in a process mimicked from living organisms such as diatoms and sponges. In this work, we have studied the effect of bovine serum albumin (BSA) as a template to direct the synthesis of silica nanoparticles (NPs) with the potential to associate proteins on its surface. Our approach enables the formation of spheres with different physicochemical properties. Particles using BSA as a protein template were smaller (â¼250-380 nm) and were more monodisperse than those lacking the proteic core (â¼700-1000 nm) as seen by dynamic light scattering (DLS), scanning electron microscopy (SEM), and environmental scanning electron microscopy (ESEM) analysis. The absence of BSA during synthesis produced silica nanoparticles without any porosity that was detectable by nitrogen adsorption, whereas particles containing BSA developed porosity in the range of 4 to 5 nm which collapsed on the removal of BSA, thus producing smaller pores. These results were in accordance with the pore size calculated by high-resolution transmission electron microscopy (HTEM). The reproducibility of the BSA-templated nanoparticle properties was determined by analyzing four batches of independent synthesizing experiments that maintained their properties. The high positive superficial charge of the nanoparticles facilitated adsorption under mild conditions of a range of proteins from an E. coli extract and a commercial preparation of laccase from Trametes versicolor. All of the proteins were quantitatively desorbed. Experiments conducted showed the reusability of the particles as supports for the ionic adsorption of the biomolecules. The protein loading capacity of the BSA-based biomimetic particles was determined using laccase as 98.7 ± 6.6 mg·g(-1) of particles.
Assuntos
Materiais Biomiméticos/química , Nanopartículas/química , Soroalbumina Bovina/química , Dióxido de Silício/química , Animais , Bovinos , Fenômenos Químicos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The present work refers to clay-graphene nanomaterials prepared by a green way using caramel from sucrose and two types of natural clays (montmorillonite and sepiolite) as precursors, with the aim of evaluating their potential use in hydrogen storage. The impregnation of the clay substrates by caramel in aqueous media, followed by a thermal treatment in the absence of oxygen of these clay-caramel intermediates gives rise to graphene-like materials, which remain strongly bound to the silicate support. The nature of the resulting materials was characterized by different techniques such as XRD, Raman spectroscopy and TEM, as well as by adsorption isotherms of N2, CO2 and H2O. These carbon-clay nanocomposites can act as adsorbents for hydrogen storage, achieving, at 298 K and 20 MPa, over 0.1 wt% of hydrogen adsorption excess related to the total mass of the system, and a maximum value close to 0.4 wt% of hydrogen specifically related to the carbon mass. The very high isosteric heat for hydrogen sorption determined from adsorption isotherms at different temperatures (14.5 kJ mol(-1)) fits well with the theoretical values available for hydrogen storage on materials that show a strong stabilization of the H2 molecule upon adsorption.
RESUMO
This work reports on the synthesis of nanosheets of layered titanosilicate JDF-L1 supported on commercial E-type glass fibers with the aim of developing novel nanoarchitectures useful as robust and easy to handle hydrogen adsorbents. The preparation of those materials is carried out by hydrothermal reaction from the corresponding gel precursor in the presence of the glass support. Because of the basic character of the synthesis media, silica from the silicate-based glass fibers can be involved in the reaction, cementing its associated titanosilicate and giving rise to strong linkages on the support with the result of very stable heterostructures. The nanoarchitectures built up by this approach promote the growth and disposition of the titanosilicate nanosheets as a house-of-cards radially distributed around the fiber axis. Such an open arrangement represents suitable geometry for potential uses in adsorption and catalytic applications where the active surface has to be available. The content of the titanosilicate crystalline phase in the system represents about 12 wt %, and this percentage of the adsorbent fraction can achieve, at 298 K and 20 MPa, 0.14 wt % hydrogen adsorption with respect to the total mass of the system. Following postsynthesis treatments, small amounts of Pd (<0.1 wt %) have been incorporated into the resulting nanoarchitectures in order to improve their hydrogen adsorption capacity. In this way, Pd-layered titanosilicate supported on glass fibers has been tested as a hydrogen adsorbent at diverse pressures and temperatures, giving rise to values around 0.46 wt % at 298 K and 20 MPa. A mechanism of hydrogen spillover involving the titanosilicate framework and the Pd nanoparticules has been proposed to explain the high increase in the hydrogen uptake capacity after the incorporation of Pd into the nanoarchitecture.