Extremity high-grade sarcomas in elderly patients, are they candidates for surgery? Experience in a sarcoma referral center.

The number of elderly patients diagnosed with cancer is increasing. However, knowledge regarding cancer in elderly patients is very scarce. The aim of this study is to analyze the differences in management and outcomes of high-grade extremity sarcomas between elderly and middle-aged patients. Two cohorts were made (> 70 and 30/50 years old) among patients treated in a multidisciplinary unit of a national reference center between 2011 and 2017 with a minimum of 2 years of follow-up. The management and outcomes between these two cohorts were compared. Seventy patients were included, 34 young patients and 36 elderly patients. The only difference between the treatment schemes was the chemotherapy used, 67.6% of the young patients received chemotherapy versus 16.7% of the elderly patients (p = 0.000015). There were no differences either in the overall survival or the progression-free survival between groups at 1 and 2-year follow-up. Deceases for other causes were nearly exclusive of elderly patients at a median of 45.57 months. Surgery is the treatment of choice for sarcomas in both elderly and young patients having similar results in terms of progression-free survival, overall survival, and surgery outcomes. The use of chemotherapy is the only difference in the treatment schemes between both groups. In the elderly patient with minimal or no comorbidity and good functional reserve, surgical curative treatment should be chosen. As for frail elderly patients, the therapeutic objectives must be focused mainly on quality of life and palliation of symptoms.

A new surgical technique for sutureless partial nephrectomy: renal sutureless device.

BACKGROUND: Several factors impact the preservation of renal function after partial nephrectomy. Warm ischemia time is the main modifiable surgical factor. Renorrhaphy represents the key of hemostasia, but it is associated with increase of warm ischemia time and complications. The aim of this study was to describe our initial surgical experience with a new surgical technique for sutureless partial nephrectomy, based on the application of our own developed renal-sutureless-device-RSD. METHODS: Between 2020-2021, 10 patients diagnosed with renal cell carcinoma stage cT1a-b cN0M0 with an exophytic component were operated using renal-sutureless-device-RSD. Surgical technique of sutureless partial nephrectomy with renal-sutureless-device-RSD is described in a step-by-step fashion. Clinical data was collected in a dedicated database. Presurgical, intraoperative, postoperative variables, pathology and functional results were evaluated. Medians and ranges of values for selected variables were reported as descriptive statistics. RESULTS: Partial nephrectomy was carried out with the use of renal-sutureless-device-RSD without renorrhaphy in all cases (70%cT1a-30%cT1b). Median tumor size was 3.15 cm (IQR: 2.5-4.5). R.E.N.A.L Score had a range between 4a-10. Median surgical time was 97.5 minutes (IQR 75-105). Renal artery clamping was only required in 4 cases, with a median warm ischemia time of 12.5 minutes (IQR 10-15). No blood transfusion, intraoperative and postoperative complications were noted. Free-of-disease margin rate achieved was 90%. Median length of stay was 2 days (IQR 2-2). Laboratory data on hemoglobin and hematocrit levels, as well as renal function tests, remained stable after partial nephrectomy. CONCLUSIONS: Our initial experience suggests that a sutureless PN using the RSD device is feasible and safe. Further investigation is needed to determine the clinical benefit of this technique.

HoloLens 1 vs. HoloLens 2: Improvements in the New Model for Orthopedic Oncological Interventions.

This work analyzed the use of Microsoft HoloLens 2 in orthopedic oncological surgeries and compares it to its predecessor (Microsoft HoloLens 1). Specifically, we developed two equivalent applications, one for each device, and evaluated the augmented reality (AR) projection accuracy in an experimental scenario using phantoms based on two patients. We achieved automatic registration between virtual and real worlds using patient-specific surgical guides on each phantom. They contained a small adaptor for a 3D-printed AR marker, the characteristic patterns of which were easily recognized using both Microsoft HoloLens devices. The newest model improved the AR projection accuracy by almost 25%, and both of them yielded an RMSE below 3 mm. After ascertaining the enhancement of the second model in this aspect, we went a step further with Microsoft HoloLens 2 and tested it during the surgical intervention of one of the patients. During this experience, we collected the surgeons' feedback in terms of comfortability, usability, and ergonomics. Our goal was to estimate whether the improved technical features of the newest model facilitate its implementation in actual surgical scenarios. All of the results point to Microsoft HoloLens 2 being better in all the aspects affecting surgical interventions and support its use in future experiences.

Technique tip: 3D printing surgical guide for pes cavus midfoot osteotomy.

BACKGROUND: Pes cavus can be defined as an abnormal elevation of the longitudinal arches, which is often secondary to a muscle imbalance. This deformity affects the foot's three dimensions (3D) and our osteotomies are usually planned on a lateral (two-dimension) X-ray. Are we really considering all the spatial components of the deformity? The aim of this study is to present a technique tip to identify the apical plane of the pes cavus deformity and perform a midfoot dorsal-based wedge resection osteotomy by using customized 3D printed surgical guides. METHODS: Three patients underwent the presented technique, all for the indication of symptomatic neuromuscular pes cavus with both anterior and posterior deformity. RESULTS: 3D-printed patient-specific guides help the surgeon to minimize human error, improving intraoperative accuracy, while reducing surgical time and intraoperative X-ray exposure. CONCLUSIONS: Closing wedge midfoot osteotomy to correct anterior pes cavus may be an interesting indication to use customized 3D printed surgical guides.

Augmented Reality as a Tool to Guide PSI Placement in Pelvic Tumor Resections.

Patient-specific instruments (PSIs) have become a valuable tool for osteotomy guidance in complex surgical scenarios such as pelvic tumor resection. They provide similar accuracy to surgical navigation systems but are generally more convenient and faster. However, their correct placement can become challenging in some anatomical regions, and it cannot be verified objectively during the intervention. Incorrect installations can result in high deviations from the planned osteotomy, increasing the risk of positive resection margins. In this work, we propose to use augmented reality (AR) to guide and verify PSIs placement. We designed an experiment to assess the accuracy provided by the system using a smartphone and the HoloLens 2 and compared the results with the conventional freehand method. The results showed significant differences, where AR guidance prevented high osteotomy deviations, reducing maximal deviation of 54.03 mm for freehand placements to less than 5 mm with AR guidance. The experiment was performed in two versions of a plastic three-dimensional (3D) printed phantom, one including a silicone layer to simulate tissue, providing more realism. We also studied how differences in shape and location of PSIs affect their accuracy, concluding that those with smaller sizes and a homogeneous target surface are more prone to errors. Our study presents promising results that prove AR's potential to overcome the present limitations of PSIs conveniently and effectively.

Conceptual evolution of 3D printing in orthopedic surgery and traumatology: from "do it yourself" to "point of care manufacturing".

BACKGROUND: 3D printing technology in hospitals facilitates production models such as point-of-care manufacturing. Orthopedic Surgery and Traumatology is the specialty that can most benefit from the advantages of these tools. The purpose of this study is to present the results of the integration of 3D printing technology in a Department of Orthopedic Surgery and Traumatology and to identify the productive model of the point-of-care manufacturing as a paradigm of personalized medicine. METHODS: Observational, descriptive, retrospective and monocentric study of a total of 623 additive manufacturing processes carried out in a Department of Orthopedic Surgery and Traumatology from November 2015 to March 2020. Variables such as product type, utility, time or materials for manufacture were analyzed. RESULTS: The areas of expertise that have performed more processes are Traumatology, Reconstructive and Orthopedic Oncology. Pre-operative planning is their primary use. Working and 3D printing hours, as well as the amount of 3D printing material used, vary according to the type of product or material delivered to perform the process. The most commonly used 3D printing material for manufacturing is polylactic acid, although biocompatible resin has been used to produce surgical guides. In addition, the hospital has worked on the co-design of customized implants with manufacturing companies. CONCLUSIONS: The integration of 3D printing in a Department of Orthopedic Surgery and Traumatology allows identifying the conceptual evolution from "Do-It-Yourself" to "POC manufacturing".

Point-of-care manufacturing: a single university hospital's initial experience.

BACKGROUND: The integration of 3D printing technology in hospitals is evolving toward production models such as point-of-care manufacturing. This study aims to present the results of the integration of 3D printing technology in a manufacturing university hospital. METHODS: Observational, descriptive, retrospective, and monocentric study of 907 instances of 3D printing from November 2015 to March 2020. Variables such as product type, utility, time, or manufacturing materials were analyzed. RESULTS: Orthopedic Surgery and Traumatology, Oral and Maxillofacial Surgery, and Gynecology and Obstetrics are the medical specialties that have manufactured the largest number of processes. Working and printing time, as well as the amount of printing material, is different for different types of products and input data. The most common printing material was polylactic acid, although biocompatible resin was introduced to produce surgical guides. In addition, the hospital has worked on the co-design of custom-made implants with manufacturing companies and has also participated in tissue bio-printing projects. CONCLUSIONS: The integration of 3D printing in a university hospital allows identifying the conceptual evolution to "point-of-care manufacturing."

Combining Augmented Reality and 3D Printing to Improve Surgical Workflows in Orthopedic Oncology: Smartphone Application and Clinical Evaluation.

During the last decade, orthopedic oncology has experienced the benefits of computerized medical imaging to reduce human dependency, improving accuracy and clinical outcomes. However, traditional surgical navigation systems do not always adapt properly to this kind of interventions. Augmented reality (AR) and three-dimensional (3D) printing are technologies lately introduced in the surgical environment with promising results. Here we present an innovative solution combining 3D printing and AR in orthopedic oncological surgery. A new surgical workflow is proposed, including 3D printed models and a novel AR-based smartphone application (app). This app can display the patient's anatomy and the tumor's location. A 3D-printed reference marker, designed to fit in a unique position of the affected bone tissue, enables automatic registration. The system has been evaluated in terms of visualization accuracy and usability during the whole surgical workflow. Experiments on six realistic phantoms provided a visualization error below 3 mm. The AR system was tested in two clinical cases during surgical planning, patient communication, and surgical intervention. These results and the positive feedback obtained from surgeons and patients suggest that the combination of AR and 3D printing can improve efficacy, accuracy, and patients' experience.

Application of 3D printing and distributed manufacturing during the first-wave of COVID-19 pandemic. Our experience at a third-level university hospital.

BACKGROUND: 3D printing and distributed manufacturing represent a paradigm shift in the health system that is becoming critical during the COVID-19 pandemic. University hospitals are also taking on the role of manufacturers of custom-made solutions thanks to 3D printing technology. CASE PRESENTATION: We present a monocentric observational case study regarding the distributed manufacturing of three groups of products during the period of the COVID-19 pandemic from 14 March to 10 May 2020: personal protective equipment, ventilatory support, and diagnostic and consumable products. Networking during this period has enabled the delivery of a total of 17,276 units of products manufactured using 3D printing technology. The most manufactured product was the face shields and ear savers, while the one that achieved the greatest clinical impact was the mechanical ventilation adapters and swabs. The products were manufactured by individuals in 57.3% of the cases, and our hospital acted as the main delivery node in a hub with 10 other hospitals. The main advantage of this production model is the fast response to stock needs, being able to adapt almost in real time. CONCLUSIONS: The role of 3D printing in the hospital environment allows the reconciliation of in-house and distributed manufacturing with traditional production, providing custom-made adaptation of the specifications, as well as maximum efficiency in the working and availability of resources, which is of special importance at critical times for health systems such as the current COVID-19 pandemic.

Patient-specific desktop 3D-printed guides for pelvic tumour resection surgery: a precision study on cadavers.

PURPOSE: 3D-printed patient-specific instruments have become a useful tool to improve accuracy in pelvic tumour resections. However, their correct placement can be challenging in some regions due to the morphology of the bone, so it is essential to be aware of the possible placement errors in each region. In this study, we characterize these errors in common pelvic osteotomies. METHODS: We conducted an experiment with 9 cadaveric specimens, for which we acquired a pre-operative computed tomography scan. Small PSIs were designed for each case following a realistic surgical approach for four regions of the pelvis: iliac crest (C), supra-acetabular (S), ischial (I), and pubic (P). Final surgical placement was based on a post-operative scan. The resulting positions were compared with pre-operative planning, obtaining translations, rotations, and maximum osteotomy deviations in a local reference frame defined based on the bone's morphology. RESULTS: Mean translations and rotations in the direction of the osteotomy plane were as follows: C = 5.3 mm, 6.7°; S = 1.8 mm, 5.1°; I = 1.5 mm, 3.4°; P = 1.8 mm, 3.5°. Mean translations in the remaining axes were below 2 mm. Maximum osteotomy deviations (75% of cases) were below 11.8 mm in C (7.8 mm for half-length), 7.8 mm in S (5.5 mm for half-length), 5.5 mm in I, and 3.7 mm in P. CONCLUSION: We have characterized placement errors for small PSIs in four regions of the pelvis. Our results show high errors in C and S PSIs in the direction of the resection plane's normal, and thus large osteotomy deviations. Deviations in short osteotomies in S, I and P and placement errors in the remaining directions were low. The PSIs used in this study are biocompatible and can be produced with a desktop 3D printer, thus minimizing manufacturing cost.

Combining Augmented Reality and 3D Printing to Display Patient Models on a Smartphone.

Augmented reality (AR) has great potential in education, training, and surgical guidance in the medical field. Its combination with three-dimensional (3D) printing (3DP) opens new possibilities in clinical applications. Although these technologies have grown exponentially in recent years, their adoption by physicians is still limited, since they require extensive knowledge of engineering and software development. Therefore, the purpose of this protocol is to describe a step-by-step methodology enabling inexperienced users to create a smartphone app, which combines AR and 3DP for the visualization of anatomical 3D models of patients with a 3D-printed reference marker. The protocol describes how to create 3D virtual models of a patient's anatomy derived from 3D medical images. It then explains how to perform positioning of the 3D models with respect to marker references. Also provided are instructions for how to 3D print the required tools and models. Finally, steps to deploy the app are provided. The protocol is based on free and multi-platform software and can be applied to any medical imaging modality or patient. An alternative approach is described to provide automatic registration between a 3D-printed model created from a patient's anatomy and the projected holograms. As an example, a clinical case of a patient suffering from distal leg sarcoma is provided to illustrate the methodology. It is expected that this protocol will accelerate the adoption of AR and 3DP technologies by medical professionals.

Craniosynostosis surgery: workflow based on virtual surgical planning, intraoperative navigation and 3D printed patient-specific guides and templates.

Craniosynostosis must often be corrected using surgery, by which the affected bone tissue is remodeled. Nowadays, surgical reconstruction relies mostly on the subjective judgement of the surgeon to best restore normal skull shape, since remodeled bone is manually placed and fixed. Slight variations can compromise the cosmetic outcome. The objective of this study was to describe and evaluate a novel workflow for patient-specific correction of craniosynostosis based on intraoperative navigation and 3D printing. The workflow was followed in five patients with craniosynostosis. Virtual surgical planning was performed, and patient-specific cutting guides and templates were designed and manufactured. These guides and templates were used to control osteotomies and bone remodeling. An intraoperative navigation system based on optical tracking made it possible to follow preoperative virtual planning in the operating room through real-time positioning and 3D visualization. Navigation accuracy was estimated using intraoperative surface scanning as the gold-standard. An average error of 0.62 mm and 0.64 mm was obtained in the remodeled frontal region and supraorbital bar, respectively. Intraoperative navigation is an accurate and reproducible technique for correction of craniosynostosis that enables optimal translation of the preoperative plan to the operating room.

Patient-Specific Instrument Can Improve Functional and Radiographic Results during Learning Curve for Oxford Unicompartmental Knee Arthroplasty.

The true value of use of patient-specific instrumentation (PSI) systems by inexperienced surgeons during their learning curve to improve the clinical and radiographic outcome of unicompartmental knee arthroplasty (UKA) has not been previously studied. Fifty patients with a mean age of 64.3 years undergoing surgery for Oxford UKA were prospectively divided into two groups. Twenty-five patients were operated on by a surgeon with no prior experience in UKA using a PSI system and the other 25 patients by an experienced surgeon using a conventional procedure. Patients were scored using joint range of motion (ROM), the Knee Society Score (KSS), the Knee Injury and Osteoarthritis Outcome Score (KOOS), and the 12-item Short-Form (SF-12) before and 3 months and 2 years after surgery. Impact of use of PSI was measured by comparing clinical and radiographic outcome, complications, and implant survival. No evidence of poorer clinical outcome was seen in any subscale of KSS, KOOS, and SF-12 for inexperienced surgeons using PSI (p = 0.45, p = 0.32, and p = 0.61, respectively). No difference was found between the two procedures in precision of radiographic alignment of components (p = 0.53). No complication occurred in any group. PSI may improve precision of component alignment during the learning curve of surgeons, thus achieving functional results similar to those of more experienced surgeons using a conventional procedure.

Augmented reality in computer-assisted interventions based on patient-specific 3D printed reference.

Augmented reality (AR) can be an interesting technology for clinical scenarios as an alternative to conventional surgical navigation. However, the registration between augmented data and real-world spaces is a limiting factor. In this study, the authors propose a method based on desktop three-dimensional (3D) printing to create patient-specific tools containing a visual pattern that enables automatic registration. This specific tool fits on the patient only in the location it was designed for, avoiding placement errors. This solution has been developed as a software application running on Microsoft HoloLens. The workflow was validated on a 3D printed phantom replicating the anatomy of a patient presenting an extraosseous Ewing's sarcoma, and then tested during the actual surgical intervention. The application allowed physicians to visualise the skin, bone and tumour location overlaid on the phantom and patient. This workflow could be extended to many clinical applications in the surgical field and also for training and simulation, in cases where hard body structures are involved. Although the authors have tested their workflow on AR head mounted display, they believe that a similar approach can be applied to other devices such as tablets or smartphones.

Three dimensional-printed patient-specific cutting guides for femoral varization osteotomy: Do it yourself.

INTRODUCTION: In valgus knees of young patients, opening-wedge distal femoral osteotomy is a valid treatment option for axial corrections. It allows the surgeon to achieve accurate correction, which is directly related to the functional outcome and survivorship of the osteotomy. This study presents a new technique based on three-dimensional (3D)-printed cutting guides for opening-wedge distal femoral osteotomies, in which pre-operative planning and intraoperative executional accuracy play a major role. MATERIAL AND METHODS: Pursuing axial correction accuracy, 3D-printed patient-specific positioning guides and wedge spacers were both created and used by the surgeon to implement the femoral osteotomy. The proposed technique was performed in 12 consecutive patients (cases). The results were compared with 20 patients (controls) in which opening-wedge distal femoral osteotomies were performed following the traditional technique. Accuracy of the axial correction, surgical time, fluoroscopic time and costs were measured. RESULTS: More accurate axial correction with reduced surgical time (32min less), intraoperative fluoroscopic images (59 images less) and costs (estimated €412 less) were achieved with the use of the customized guides when compared with the traditional technique. DISCUSSION: Accurate correction of the axial alignment of the limb is a critical step in survivorship of the osteotomy. Improving the technique to enhance accuracy focused on this issue. CONCLUSIONS: The use of patient-customized cutting guides minimised human error; therefore, surgical time was reduced and accurate axial correction was achieved. The surgeon mastered all steps in a do-it-yourself philosophy style.

Intraoperative radiotherapy for extremity soft-tissue sarcomas: can long-term local control be achieved?

BACKGROUND: Intraoperative electron-beam radiation therapy (IOERT) during limb-sparing surgery has the advantage of delivering a single high boost dose to sarcoma residues and surgical bed area near to radiosensitive structures with limited toxicity. Retrospective studies have suggested that IOERT may improve local control compared to standard radiotherapy and we aimed to demonstrate this theory. Therefore, we performed an observational prospective study to determine (1) if it is possible to achieve high local control by adding IOERT to external-beam radiation therapy (EBRT) in extremity soft-tissue sarcomas (STS), (2) if it is possible to improve long-term survival rates, and (3) if toxicity could be reduced with IOERT MATERIALS AND METHODS: From 1995-2003, 39 patients with extremity STS were treated with IOERT and postoperative radiotherapy. The median follow-up time was 13.2 years (0.7-19). Complications, locoregional control and survival rates were collected. RESULTS: Actuarial local control was attained in 32 of 39 patients (82%). Control was achieved in 88% of patients with primary disease and in 50% of those with recurrent tumors (p = 0.01). Local control was shown in 93% of patients with negative margins and in 50% of those with positive margins (p = 0.002). Limb-sparing was achieved in 32 patients (82%). The overall survival rate was 64%. 13% of patients had grade ≥3 acute toxicity, and 12% developed grade ≥3 chronic toxicity. CONCLUSION: IOERT used as a boost to EBRT provides high local control and limb-sparing rates in patients with STS of the extremities, with less toxicity than EBRT alone.

Ultra-Minimally Invasive Ultrasound-Guided Carpal Tunnel Release: A Randomized Clinical Trial.

OBJECTIVES: The purpose of this study was to compare the outcomes of 1-mm ultra-minimally invasive ultrasound-guided carpal tunnel release and 2-cm blind mini-open carpal tunnel release. METHODS: We conducted a single-center individual parallel-group controlled-superiority randomized control trial in an ambulatory office-based setting at a third-level referral hospital. Eligible participants had clinical signs of primary carpal tunnel syndrome and positive electrodiagnostic test results and were followed for 12 months. Independent outcome assessors were blinded. Patients were randomized by concealed allocation (1:1) by an independent blocked computer-generated list. The postoperative score on the Quick-Disabilities of the Arm, Shoulder, and Hand (QuickDASH) questionnaire was the primary variable. Grip strength and time for discontinuation of oral analgesics, complete wrist flexion-extension, relief of paresthesia, and return to normal daily activities (including work) were assessed. RESULTS: Ninety-two of 128 eligible patients were randomly allocated and analyzed. QuickDASH scores were 2.2 to 3.3 times significantly lower in the ultra-minimally invasive group for the first 6 months: 23.6 [95% confidence interval (CI), 20.5, 27.4] versus 52.6 [95% CI, 49.4, 57.0] at the first week and 4.09 [95% CI, 1.5, 7.1] versus 13.0 [95% CI, 9.4, 18.9] at 6 months. Return to normal daily activities occurred significantly sooner in the ultra-minimally invasive group: 4.9 [95% CI, 3.2, 6.5] versus 25.4 [95% CI, 18.2, 32.6] days. CONCLUSIONS: Ultra-minimally invasive carpal tunnel release provides earlier functional return and less postoperative morbidity with the same neurologic recovery as mini-open carpal tunnel release for patients with symptomatic primary carpal tunnel syndrome.

3D Surgical Printing Cutting Guides for Open-Wedge High Tibial Osteotomy: Do It Yourself.

Opening wedge osteotomy has recently gained popularity, thanks to the recent implementation of locking plates, which have shown equivalent stability with greater reproducibility, accuracy, and longevity than the closing wedge techniques and a lower prosthetic conversion rate. We present a new "do-it-yourself" cutting guides system for tibial opening osteotomy. Using a conventional computed tomography digital image, a positioning guide and wedge spacers were printed in three dimensions (3D) for implementing the osteotomy and obtaining the planned correction. The surgeon makes the whole process in a do-it-yourself style. This new technique was used in eight cases. Previous opening osteotomies with the standard technique were used as control (20 cases). Surgical time, fluoroscopic time, and accuracy of the axial correction were measured. The use of a custom positioning guide reduced the surgical (31 minutes less) and fluoroscopic times (6.9 times less) while achieving a high-axis correction accuracy compared with the standard technique. Digitally planned and executed osteotomies under 3D printed osteotomy positioning guides help the surgeon to minimize human error while reducing surgical time. The reproducibility of this technique is very robust, allowing a transfer of the steps planned in a virtual environment to the operating table.

[Infections in the surgical management of pelvic ring fractures]. / Infecciones en el manejo quirúrgico de las fracturas del anillo pélvico.

BACKGROUND: Infections that occur after the surgical management of pelvic fractures may involve potentially devastating complications. The broader approaches involving soft tissue dissection and a long operative time may increase the infection rate when compared with more conservative approaches. This incidence may be reduced with a better understanding of the approaches, lymph node sparing and antibiotic use. The purpose of this study is to assess the incidence and severity of local infections in a series of adult patients with pelvic ring lesions treated surgically. MATERIAL AND METHODS: This is a prospective observational descriptive study. A total of 49 patients operated on by a single surgeon from 2004 to 2008 were included. RESULTS: Forty-four patients (90%) had no signs of infection during the treatment period. In the remaining 5 cases (10%), 5 episodes of infection were documented. CONCLUSIONS: The identification of a local postoperative infection warrants an aggressive and urgent assessment of the patient. The devitalized tissue should be removed and empiric antibiotic therapy should be instituted after taking culture samples. A deep infection rate after pelvic fixation ranging from 0 to 10% has been published. The prevalence is higher among the surgical teams with less expertise. The incidence rate in our review was similar to the one reported in the literature.