Ultrahigh-Q AlGaAs-on-insulator microresonators for integrated nonlinear photonics.

Aluminum gallium arsenide (AlGaAs) and related III-V semiconductors have excellent optoelectronic properties. They also possess strong material nonlinearity as well as high refractive indices. In view of these properties, AlGaAs is a promising candidate for integrated photonics, including both linear and nonlinear devices, passive and active devices, and associated applications. Low propagation loss is essential for integrated photonics, particularly in nonlinear applications. However, achieving low-loss and high-confinement AlGaAs photonic integrated circuits poses a challenge. Here we show an effective reduction of surface-roughness-induced scattering loss in fully etched high-confinement AlGaAs-on-insulator nanowaveguides by using a heterogeneous wafer-bonding approach and optimizing fabrication techniques. We demonstrate ultrahigh-quality AlGaAs microring resonators and realize quality factors up to 3.52 × 106 and finesses as high as 1.4 × 104. We also show ultra-efficient frequency comb generations in those resonators and achieve record-low threshold powers on the order of ∼20 µW and ∼120 µW for the resonators with 1 THz and 90 GHz free-spectral ranges, respectively. Our result paves the way for the implementation of AlGaAs as a novel integrated material platform specifically for nonlinear photonics and opens a new window for chip-based efficiency-demanding practical applications.

Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators.

Recent advances in nonlinear optics have revolutionized integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials feature much higher nonlinear coefficients and convenience in active integration, they have suffered from high waveguide losses that prevent the realization of efficient nonlinear processes on-chip. Here, we challenge this status quo and demonstrate a low loss AlGaAs-on-insulator platform with anomalous dispersion and quality (Q) factors beyond 1.5 × 106. Such a high quality factor, combined with high nonlinear coefficient and small mode volume, enabled us to demonstrate a Kerr frequency comb threshold of only ∼36 µW in a resonator with a 1 THz free spectral range, ∼100 times lower compared to that in previous semiconductor platforms. Moreover, combs with broad spans (>250 nm) have been generated with a pump power of ∼300 µW, which is lower than the threshold power of state-of the-art dielectric micro combs. A soliton-step transition has also been observed for the first time in an AlGaAs resonator.

Improved second harmonic performance in periodically poled LNOI waveguides through engineering of lateral leakage.

In this contribution, we investigate the impact of lateral leakage for linear and nonlinear optical waveguides in lithium niobate on an insulator (LNOI). Silicon nitride (SiN) loaded and direct patterned lithium niobate cross-sections are investigated. We show that lateral leakage can take place for the TE mode in LNOI ridge waveguides (X-cut lithium niobate), due to the birefringence of the material. This work gives guidelines for designing waveguides in LNOI that do not suffer from the lateral leakage effect. By applying these design considerations, we avoided the lateral leakage effect at the second harmonic wavelength of a nonlinear optical waveguide in LNOI and demonstrate a peak second harmonic generation conversion efficiency of ~1160% W-1cm-2.

Low loss (Al)GaAs on an insulator waveguide platform.

In this Letter, we demonstrate a low loss gallium arsenide and aluminum gallium arsenide on an insulator platform by heterogenous integration. The resonators on this platform exhibit record high quality factors up to 1.5×106, corresponding to a propagation loss ∼0.4 dB/cm. For the first time, to the best of our knowledge, the loss of integrated III-V semiconductor on insulator waveguides becomes comparable with that of the silicon-on-insulator waveguides. This Letter should have a significant impact on photonic integrated circuits (PICs) and become an essential building block for the evolving nonlinear PICs and integrated quantum photonic systems in the future.

On-wafer probing-kit for RF characterization of silicon photonic integrated transceivers.

A wafer-level and high-efficiency radio frequency (RF) testing of a photonic device is highly desired in the fabrication and characterization of large-scale photonic integration circuits. In this work, we propose on-wafer probing kit designs, and demonstrate a damage-free, self-calibrated RF characterization of an integrated silicon photonic transceiver with a heterodyne mixing approach. Reduced or even free of fiber coupling off chip operation can be achieved with the on-wafer probing-kit to extract the frequency responses of broadband modulators and photodetectors in the photonic integration transceiver, with no requirement of electro-optical or opto-electrical calibration. A proof-of-concept probing kit is designed and fabricated with an on-chip electroabsorption modulator (EAM) and photodetectors by heterogeneously integrated III-V material on silicon substrate. On-wafer RF measurements with the self-calibration method are experimentally demonstrated with an accuracy analysis compared with the conventional swept-frequency method. The on-wafer and full-electrical test nature of the probing kit significantly advances performance monitoring of photonic integration circuits during chip fabrication, and promisingly offers predictable outcome and yield analysis before packaging.

Heterogeneous integration of lithium niobate and silicon nitride waveguides for wafer-scale photonic integrated circuits on silicon.

An ideal photonic integrated circuit for nonlinear photonic applications requires high optical nonlinearities and low loss. This work demonstrates a heterogeneous platform by bonding lithium niobate (LN) thin films onto a silicon nitride (Si3N4) waveguide layer on silicon. It not only provides large second- and third-order nonlinear coefficients, but also shows low propagation loss in both the Si3N4 and the LN-Si3N4 waveguides. The tapers enable low-loss-mode transitions between these two waveguides. This platform is essential for various on-chip applications, e.g., modulators, frequency conversions, and quantum communications.

Highly linear heterogeneous-integrated Mach-Zehnder interferometer modulators on Si.

In this paper we demonstrate highly linear Mach-Zehnder interferometer modulators utilizing heterogeneous integration on a Si substrate (HS-MZM). A record high dynamic range was achieved for silicon devices, obtained using hybrid III-V/Si phase modulation sections and single drive push-pull operation, demonstrating a spurious free dynamic range (SFDR) of 112 dB∙Hz2/3 at 10 GHz, comparable to commercial Lithium Niobate MZMs.