Immature bovine cartilage wear is due to fatigue failure from repetitive compressive forces and not reciprocating frictional forces.

OBJECTIVE: Wear of articular cartilage is not well understood. We hypothesize that cartilage wears due to fatigue failure in repetitive compression instead of reciprocating friction. DESIGN: This study compares reciprocating sliding of immature bovine articular cartilage against glass in two testing configurations: (1) a stationary contact area configuration (SCA), which results in static compression, interstitial fluid depressurization, and increasing friction coefficient during reciprocating sliding, and (2) a migrating contact area configuration (MCA), which maintains pressurization and low friction while producing repetitive compressive loading in addition to reciprocating sliding. Contact pressure, sliding duration, and sliding distance were controlled to be similar between test groups. RESULTS: SCA tests exhibited an average friction coefficient of µ=0.084±0.032, while MCA tests exhibited a lower average friction coefficient of µ=0.020±0.008 (p<10-4). Despite the lower friction, MCA cartilage samples exhibited clear surface damage with a significantly greater average surface deviation from a fitted plane after wear testing (Rq=0.125±0.095 mm) than cartilage samples slid in a SCA configuration (Rq=0.044±0.017 mm, p=0.002), which showed minimal signs of wear. Polarized light microscopy confirmed that delamination damage occurred between the superficial and middle zones of the articular cartilage in MCA samples. CONCLUSIONS: The greatest wear was observed in the group with lowest friction coefficient, subjected to cyclical instead of static compression, implying that friction is not the primary driver of cartilage wear. Delamination between superficial and middle zones implies the main mode of wear is fatigue failure under cyclical compression, not fatigue or abrasion due to reciprocating frictional sliding.

Early detection of Brucella canis via quantitative polymerase chain reaction analysis.

Canine brucellosis is a reportable zoonotic disease that can lead to canine reproductive losses and human infection through contact with infected urine or other genitourinary secretions. Although many locations require testing and euthanasia of positive dogs, current diagnosis is limited by the time required for seroconversion, for example, presence of B. canis-specific antibodies. The goal of this study was to determine the diagnostic ability of Brucella canis-specific quantitative polymerase chain reaction (qPCR) assay to detect B. canis in field samples prior to serological positivity for faster diagnosis and prevention of transmission within kennels or in households. Two kennels, one of which was located in the owner's home, were sampled following observation of suggestive clinical signs and positive serology of at least one dog. Specimens obtained were comparatively analysed via serology and qPCR analysis. 107 dogs were analysed for B. canis infection via qPCR: 105 via whole-blood samples, 65 via vaginal swab, six via urine and seven via genitourinary tract tissue taken at necropsy. Forty-five dogs were found to be infected with canine brucellosis via qPCR, of which 22 (48.89%) were seropositive. A statistically significant number (P = 0.0228) of qPCR-positive dogs, 5/25 (20.00%), seroconverted within a 30-day interval after initial serologic testing. As compared to serology, qPCR analysis of DNA from vaginal swabs had a sensitivity of 92.31% and specificity of 51.92%, and qPCR analysis of DNA from whole-blood samples had a sensitivity of 16.67% and specificity of 100%. B. canis outer membrane protein 25 DNA qPCR from non-invasive vaginal swab and urine samples provided early detection of B. canis infection in dogs prior to detection of antibodies. This assay provides a critical tool to decrease zoonotic spread of canine brucellosis, its associated clinical presentation(s), and emotional and economic repercussions.

Postoperative follow-up: tracking compliance and complications.

The focus of ambulatory surgery is wellness. For the ambulatory surgery client, most of postoperative recovery occurs at home, away from close nursing supervision. Postoperative follow-up is essential after discharge to track the client's compliance with discharge instructions and to identify complications. This presents a unique challenge and opportunity for nurses to evaluate the effectiveness of their teaching, identify quality improvement issues, and detect complications early during the recovery period.

Rapid screening for peripheral neuropathy: a field study with the Optacon.

The modified Optacon, a simple battery-powered device that measures fingertip vibration sensation, was used by para-professionals to screen 257 acrylamide-exposed individuals. Consistent data were obtained on repeated testing of individuals, and there was an age-related linear decrease in vibration sensitivity within the population. Subclinical peripheral neuropathy was detected in two individuals, one acrylamide-related and the other nutritional-alcoholic. This study establishes the use of the modified Optacon as a screening device for some types of peripheral nerve dysfunction.