Nanoscale Surface and Bulk Electronic Properties of Ti3C2Tx MXene Unraveled by Multimodal X-Ray Spectromicroscopy.

2D layered materials, such as transition metal carbides or nitrides, known as MXenes, offer an ideal platform to investigate charge transfer processes in confined environment, relevant for energy conversion and storage applications. Their rich surface chemistry plays an essential role in the pseudocapacitive behavior of MXenes. However, the local distribution of surface functional groups over single flakes and within few- or multilayered flakes remains unclear. In this work, scanning X-ray microscopy (SXM) is introduced with simultaneous transmission and electron yield detection, enabling multimodal nanoscale chemical imaging with bulk and surface sensitivity, respectively, of individual MXene flakes. The Ti chemical bonding environment is found to significantly vary between few-layered hydrofluoric acid-etched Ti3C2Tx MXenes and multilayered molten salt (MS)-etched Ti3C2Tx MXenes. Postmortem analysis of MS-etched Ti3C2Tx electrodes cycled in a Li-ion battery further illustrates that simultaneous bulk and surface chemical imaging using SXM offers a method well adapted to the characterization of the electrode-electrolyte interactions at the nanoscale.

Tuning the Microenvironment of Water Confined in Ti3C2Tx MXene by Cation Intercalation.

The local microenvironment has recently been found to play a major role in the electrocatalytic activity of nanomaterials. Modulating the microenvironment by adding alkali metal cations into the electrolyte can be used to either suppress hydrogen or oxygen evolution, thereby extending the electrochemical window of energy storage systems, or to tune the selectivity of electrocatalysts. MXenes are a large family of two-dimensional transition metal carbides, nitrides, and carbonitrides that have shown potential for use in electrochemical energy storage applications. Due to their negatively charged surfaces, MXenes can accommodate cations and water molecules between the layers. Nevertheless, the nature of the aqueous microenvironment in the MXene interlayer space is poorly understood. Here, we apply Fourier transform infrared spectroscopy (FTIR) to probe the hydrogen bonding of intercalated water in Ti3C2Tx as a function of intercalated cation and relative humidity. Substantial changes in the FTIR spectra after cation exchange demonstrate that the hydrogen bonding of water molecules confined between the MXene layers is strongly cation-dependent. Furthermore, the IR absorbance of the confined water correlates with resistivity estimated by 4-point probe measurements and interlayer distance calculated from XRD patterns. This work demonstrates that cation intercalation strongly modulates the confined microenvironment, which can be used to tune the activity or selectivity of electrochemical reactions in the interlayer space of MXenes in the future.

Coordinative Stabilization of Single Bismuth Sites in a Carbon-Nitrogen Matrix to Generate Atom-Efficient Catalysts for Electrochemical Nitrate Reduction to Ammonia.

Electrochemical nitrate reduction to ammonia powered by renewable electricity is not only a promising alternative to the established energy-intense and non-ecofriendly Haber-Bosch reaction for ammonia generation but also a future contributor to the ever-more important denitrification schemes. Nevertheless, this reaction is still impeded by the lack of understanding for the underlying reaction mechanism on the molecular scale which is necessary for the rational design of active, selective, and stable electrocatalysts. Herein, a novel single-site bismuth catalyst (Bi-N-C) for nitrate electroreduction is reported to produce ammonia with maximum Faradaic efficiency of 88.7% and at a high rate of 1.38 mg h-1 mgcat -1 at -0.35 V versus reversible hydrogen electrode (RHE). The active center (described as BiN2 C2 ) is uncovered by detailed structural analysis. Coupled density functional theory calculations are applied to analyze the reaction mechanism and potential rate-limiting steps for nitrate reduction based on the BiN2 C2 model. The findings highlight the importance of model catalysts to utilize the potential of nitrate reduction as a new-generation nitrogen-management technology based on the construction of efficient active sites.

Surface-Mediated Charge Transfer of Photogenerated Carriers in Diamond.

Solvated electrons are highly reductive chemical species whose chemical properties remain largely unknown. Diamond materials are proposed as a promising emitter of solvated electrons and visible light excitation would enable solar-driven CO2 or N2 reductions reactions in aqueous medium. But sub-bandgap excitation remains challenging. In this work, the role of surface states on diamond materials for charge separation and emission in both gaseous and aqueous environments from deep UV to visible light excitation is elucidated. Four different X-ray and UV-vis spectroscopy methods are applied to diamond materials with different surface termination, doping and crystallinity. Surface states are found to dominate sub-bandgap charge transfer. However, the surface charge separation is drastically reduced for boron-doped diamond due to a very high density of bulk defects. In a gaseous atmosphere, the oxidized diamond surface maintains a negative electron affinity, allowing charge emission, due to remaining hydrogenated and hydroxylated groups. In an aqueous electrolyte, a photocurrent for illumination down to 3.5 eV is observed for boron-doped nanostructured diamond, independent of the surface termination. This study opens new perspectives on photo-induced interfacial charge transfer processes from metal-free semiconductors such as diamonds.

Low-Volume Reaction Monitoring of Carbon Dot Light Absorbers in Optofluidic Microreactors.

Optical monitoring and screening of photocatalytic batch reactions using cuvettes ex situ is time-consuming, requires substantial amounts of samples, and does not allow the analysis of species with low extinction coefficients. Hollow-core photonic crystal fibers (HC-PCFs) provide an innovative approach for in situ reaction detection using ultraviolet-visible absorption spectroscopy, with the potential for high-throughput automation using extremely low sample volumes with high sensitivity for monitoring of the analyte. HC-PCFs use interference effects to guide light at the center of a microfluidic channel and use this to enhance detection sensitivity. They open the possibility of comprehensively studying photocatalysts to extract structure-activity relationships, which is unfeasible with similar reaction volume, time, and sensitivity in cuvettes. Here, we demonstrate the use of HC-PCF microreactors for the screening of the electron transfer properties of carbon dots (CDs), a nanometer-sized material that is emerging as a homogeneous light absorber in photocatalysis. The CD-driven photoreduction reaction of viologens (XV2+) to the corresponding radical monocation XV•+ is monitored in situ as a model reaction, using a sample volume of 1 µL per measurement and with a detectability of <1 µM. A range of different reaction conditions have been systematically studied, including different types of CDs (i.e., amorphous, graphitic, and graphitic nitrogen-doped CDs), surface chemistry, viologens, and electron donors. Furthermore, the excitation irradiance was varied to study its effect on the photoreduction rate. The findings are correlated with the electron transfer properties of CDs based on their electronic structure characterized by soft X-ray absorption spectroscopy. Optofluidic microreactors with real-time optical detection provide unique insight into the reaction dynamics of photocatalytic systems and could form the basis of future automated catalyst screening platforms, where samples are only available on small scales or at a high cost.

Nanointerfaces: Concepts and Strategies for Optical and X-ray Spectroscopic Characterization.

Interfaces at the nanoscale, also called nanointerfaces, play a fundamental role in physics and chemistry. Probing the chemical and electronic environment at nanointerfaces is essential in order to elucidate chemical processes relevant for applications in a variety of fields. Many spectroscopic techniques have been applied for this purpose, although some approaches are more appropriate than others depending on the type of the nanointerface and the physical properties of the different phases. In this Perspective, we introduce the major concepts to be considered when characterizing nanointerfaces. In particular, the interplay between the characteristic length of the nanointerfaces, and the probing and information depths of different spectroscopy techniques is discussed. Differences between nano- and bulk interfaces are explained and illustrated with chosen examples from optical and X-ray spectroscopies, focusing on solid-liquid nanointerfaces. We hope that this Perspective will help to prepare spectroscopic characterization of nanointerfaces and stimulate interest in the development of new spectroscopic techniques adapted to the nanointerfaces.

Overcoming Diffusion Limitation of Faradaic Processes: Property-Performance Relationships of 2D Conductive Metal-Organic Framework Cu3 (HHTP)2 for Reversible Lithium-Ion Storage.

Faradaic reactions including charge transfer are often accompanied with diffusion limitation inside the bulk. Conductive two-dimensional frameworks (2D MOFs) with a fast ion transport can combine both-charge transfer and fast diffusion inside their porous structure. To study remaining diffusion limitations caused by particle morphology, different synthesis routes of Cu-2,3,6,7,10,11-hexahydroxytriphenylene (Cu3 (HHTP)2 ), a copper-based 2D MOF, are used to obtain flake- and rod-like MOF particles. Both morphologies are systematically characterized and evaluated for redox-active Li+ ion storage. The redox mechanism is investigated by means of X-ray absorption spectroscopy, FTIR spectroscopy and in situ XRD. Both types are compared regarding kinetic properties for Li+ ion storage via cyclic voltammetry and impedance spectroscopy. A significant influence of particle morphology for 2D MOFs on kinetic aspects of electrochemical Li+ ion storage can be observed. This study opens the path for optimization of redox active porous structures to overcome diffusion limitations of Faradaic processes.

Vibrational signature of hydrated protons confined in MXene interlayers.

The hydration structure of protons has been studied for decades in bulk water and protonated clusters due to its importance but has remained elusive in planar confined environments. Two-dimensional (2D) transition metal carbides known as MXenes show extreme capacitance in protic electrolytes, which has attracted attention in the energy storage field. We report here that discrete vibrational modes related to protons intercalated in the 2D slits between Ti3C2Tx MXene layers can be detected using operando infrared spectroscopy. The origin of these modes, not observed for protons in bulk water, is attributed to protons with reduced coordination number in confinement based on Density Functional Theory calculations. This study therefore demonstrates a useful tool for the characterization of chemical species under 2D confinement.

In Situ X-ray Absorption Spectroscopy of Metal/Nitrogen-doped Carbons in Oxygen Electrocatalysis.

Metal/nitrogen-doped carbons (M-N-C) are promising candidates as oxygen electrocatalysts due to their low cost, tunable catalytic activity and selectivity, and well-dispersed morphologies. To improve the electrocatalytic performance of such systems, it is critical to gain a detailed understanding of their structure and properties through advanced characterization. In situ X-ray absorption spectroscopy (XAS) serves as a powerful tool to probe both the active sites and structural evolution of catalytic materials under reaction conditions. In this review, we firstly provide an overview of the fundamental concepts of XAS and then comprehensively review the setup and application of in situ XAS, introducing electrochemical XAS cells, experimental methods, as well as primary functions on catalytic applications. The active sites and the structural evolution of M-N-C catalysts caused by the interplay with electric fields, electrolytes and reactants/intermediates during the oxygen evolution reaction and the oxygen reduction reaction are subsequently discussed in detail. Finally, major challenges and future opportunities in this exciting field are highlighted.

Hydrogen-Bond Restructuring of Water-in-Salt Electrolyte Confined in Ti3C2Tx MXene Monitored by Operando Infrared Spectroscopy.

Highly concentrated water-in-salt aqueous electrolytes exhibit a wider potential window compared to conventional, dilute aqueous electrolytes. Coupled with MXenes, a family of two-dimensional transition metal carbides and nitrides with impressive charge storage capabilities, water-in-salt electrolytes present a potential candidate to replace flammable and toxic organic solvents in electrochemical energy storage devices. A new charge storage mechanism was recently discovered during electrochemical cycling of Ti3C2Tx MXene electrodes in lithium-based water-in-salt electrolytes, attributed to intercalation and deintercalation of solvated Li+ ions at anodic potentials. Nevertheless, direct evidence of the state of Li+ solvation during cycling is still missing. Here, we investigate the hydrogen bonding of water intercalated between MXene layers during electrochemical cycling in a water-in-salt electrolyte with operando infrared spectroscopy. The hydrogen-bonding state of the confined water was found to change significantly as a function of potential and the concentration of Li+ ions in the interlayer space. This study provides fundamentally new insights into the electrolyte structural changes while intercalating Li+ in the MXene interlayer space.

Early dynamics of the emission of solvated electrons from nanodiamonds in water.

Solvated electrons are among the most reductive species in an aqueous environment. Diamond materials have been proposed as a promising source of solvated electrons, but the underlying emission process in water remains elusive so far. Here, we show spectroscopic evidence for the emission of solvated electrons from detonation nanodiamonds upon excitation with both deep ultraviolet (225 nm) and visible (400 nm) light using ultrafast transient absorption. The crucial role of surface termination in the emission process is evidenced by comparing hydrogenated, hydroxylated and carboxylated nanodiamonds. In particular, a transient response that we attribute to solvated electrons is observed on hydrogenated nanodiamonds upon visible light excitation, while it shows a sub-ps recombination due to trap states when excited with deep ultraviolet light. The essential role of surface reconstructions on the nanodiamonds in these processes is proposed based on density functional theory calculations. These results open new perspectives for solar-driven emission of solvated electrons in an aqueous phase using nanodiamonds.

Effects of oxidative adsorbates and cluster formation on the electronic structure of nanodiamonds.

Nanodiamonds (NDs) are modern high-potential materials relevant for applications in biomedicine, photocatalysis, and various other fields. Their electronic surface properties, especially in the liquid phase, are key to their function in the applications, but we show that they are sensitively modified by their interactions with the environment. Two important interaction modes are those with oxidative aqueous adsorbates as well as ND self-aggregation towards the formation of ND clusters. For planar diamond surfaces it is known that the electron density migrates from the diamond towards oxidative adsorbates, which is known as transfer doping. Here, we quantify this effect for highly curved NDs of varying sizes (35-147 C atoms) and surface terminations (H, OH, F), focusing on their interactions with the most abundant aqueous oxidative adsorbates (H3 O+ , O2 , O3 ). We prove that the concept of transfer doping stays valid for the case of the high-curvature NDs and can be tuned via the ND's specific properties. Secondly, we investigate the electronic structures of clusters of NDs which are known to form in particular in aqueous dispersions. Upon cluster formation, we find that the optical gaps of the structures are significantly reduced, which explains why different experimental values were obtained for the optical gap of the same structures, and the cluster's LUMO shapes resemble atom-type orbitals, as in the case of isolated spherical NDs. Our findings have implications for ND applications as photocatalysts or electronic devices, where the specific electronic properties are key to the functionality of the ND material.

Role of Dopants on the Local Electronic Structure of Polymeric Carbon Nitride Photocatalysts.

Polymeric carbon nitride (PCN) is a promising class of materials for solar-to-chemical energy conversion. The increase of the photocatalytic activity of PCN is often achieved by the incorporation of heteroatoms, whose impact on the electronic structure of PCN remains poorly explored. This work reveals that the local electronic structure of PCN is strongly altered by doping with sulfur and iron using X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS). From XAS at the carbon and nitrogen K-edges, sulfur atoms are found to mostly affect carbon atoms, in contrast to iron doping mostly altering nitrogen sites. In RIXS at the nitrogen K-edge, a vibrational progression, affected by iron doping, is evidenced, which is attributed to a vibronic coupling between excited electrons in nitrogen atoms and C-N stretching modes in PCN heterocycling rings. This work opens new perspectives for the characterization of vibronic coupling in polymeric photocatalysts.

Impact of Cation Intercalation on the Electronic Structure of Ti3C2Tx MXenes in Sulfuric Acid.

Intercalation in Ti3C2Tx MXene is essential for a diverse set of applications such as water purification, desalination, electrochemical energy storage, and sensing. The interlayer spacing between the Ti3C2Tx nanosheets can be controlled by cation intercalation; however, the impact of intercalation on the Ti3C2Tx MXene chemical and electronic structures is not well understood. Herein, we characterized the electronic structure of pristine, Li-, Na-, K-, and Mg-intercalated Ti3C2Tx MXenes dispersed initially in water and 10 mM sulfuric acid (H2SO4) using X-ray absorption spectroscopy (XAS). The cation intercalation is found to dramatically influence the chemical environment of Ti atoms. The Ti oxidation of the MXene increases progressively upon intercalation of cations of larger sizes after drying in air, while interestingly a low Ti oxidation is observed for all intercalated MXenes after dispersion in diluted H2SO4. In situ XAS at the Ti L-edge was conducted during electrochemical oxidation to probe the changes in the Ti oxidation state in the presence of different cations in H2SO4 aqueous electrolyte. By applying the sensitivity of the Ti L-edge to probe the oxidation state of Ti atoms, we demonstrate that cation-intercalation and H2SO4 environment significantly alter the Ti3C2Tx surface chemistry.

Uncovering the Charge Transfer between Carbon Dots and Water by In Situ Soft X-ray Absorption Spectroscopy.

Carbon dots (CDs) exhibit outstanding physicochemical properties that render them excellent materials for various applications, often occurring in an aqueous environment, such as light harvesting and fluorescence bioimaging. Here we characterize the electronic structures of CDs and water molecules in aqueous dispersions using in situ X-ray absorption spectroscopy. Three types of CDs with different core structures (amorphous vs graphitic) and compositions (undoped vs nitrogen-doped) were investigated. Depending on the CD core structure, different ionic currents generated upon X-ray irradiation of the CD dispersions at the carbon K-edge were detected, which are interpreted in terms of different charge transfer to the surrounding solvent molecules. The hydrogen bonding networks of water molecules upon interaction with the different CDs were also probed at the oxygen K-edge. Both core graphitization and nitrogen doping were found to endow the CDs with enhanced electron transfer and hydrogen bonding capabilities with the surrounding water molecules.

Theoretical X-ray absorption spectroscopy database analysis for oxidised 2D carbon nanomaterials.

In this work we provide a proof of principle for a theoretical methodology to identify functionalisation patterns in oxidised carbon 2D nanomaterials. The methodology is based on calculating a large number of X-ray absorption spectra of individually excited carbon atoms in different chemical environments using density functional theory. Since each resulting spectrum gives a fingerprint of the local electronic structure surrounding the excited atom, we may relate each spectrum to the functionalisation pattern of that excited atom up to a desired neighbourhood radius. These functionalisation pattern-specific spectra are collected in a database, that allows fast composition of X-ray absorption spectra for arbitrary structures in density functional theory quality. Finally, we present an exemplary application of the database approach to estimate the relative amount of functional groups in two different experimental samples of carbon nanomaterials.

Influence of surface chemistry on optical, chemical and electronic properties of blue luminescent carbon dots.

Carbon dots have attracted much attention due to their unique optical, chemical and electronic properties enabling a wide range of applications. The properties of carbon dots can be effectively adjusted through modifying their chemical composition. However, a major challenge remains in understanding the core and surface contributions to optical and electronic transitions. Here, three blue luminescent carbon dots with carboxyl, amino and hydroxyl groups were comprehensively characterized by UV-vis absorption and emission spectroscopy, synchrotron-based X-ray spectroscopy, and infrared spectroscopy. The influence of the surface functionality on their fluorescence was probed by pH-dependent photoluminescence measurements. Moreover, the hydrogen bonding interactions between water and the surface groups of carbon dots were characterized by infrared spectroscopy. Our results show that both core and surface electronic states of blue luminescent carbon dots contribute to electronic acceptor levels while the chemical nature of the surface groups determines the hydrogen bonding behavior of the carbon dots. This comprehensive spectroscopic study demonstrates that the surface chemistry has a profound influence on the electronic configuration and surface-water interaction of carbon dots, thus affecting their photoluminescence properties.

Probing Interfacial Water on Nanodiamonds in Colloidal Dispersion.

The structure of interfacial water layers around nanoparticles dispersed in an aqueous environment may have a significant impact on their reactivity and on their interaction with biological species. Using transmission soft X-ray absorption spectroscopy in liquid, we demonstrate that the unoccupied electronic states of oxygen atoms from water molecules in aqueous colloidal dispersions of nanodiamonds have a different signature than bulk water. X-ray absorption spectroscopy can thus probe interfacial water molecules in colloidal dispersions. The impacts of nanodiamond surface chemistry and concentration on interfacial water electronic signature are discussed.

Fluorination-dependent molecular orbital occupancy in ring-shaped perfluorocarbons.

Perfluorocarbons are a family of molecules consisting mainly of carbon and fluorine atoms. They have interesting chemical properties and have diverse applications in biomedicine, physical chemistry and polymer science. In this work, carbon K-edge absorption and emission spectra of liquid decalin are presented and compared to perfluorodecalin. A comprehensive picture of the electronic structure of decalin is provided based on soft X-ray absorption and emission spectroscopies. Experimental data are compared to theoretical time-dependent density functional theory for the hydrocarbon, the perfluorocarbon and the stepwise fluorinated derivatives. We observed a molecular orbital change from unoccupied to occupied orbitals for perfluorodecalin, which was induced through the fluorination process.

Impairing the radioresistance of cancer cells by hydrogenated nanodiamonds.

Hydrogenated nanodiamonds (H-NDs) exhibit a negative electron affinity that confers a high reactivity with oxygen species and a positive charge in aqueous solutions. It allows electron emission from H-NDs following irradiation by photons and in consequence may enhance the effects of radiation on cancer cells. By using three human radioresistant cancer cell lines, we showed a potentialization of cytotoxicity after a co-exposure to H-NDs and irradiation; an event occurring through the induction of DNA damage and reactive oxygen species. This occurred together with a decrease in cell impedance, the activation of G1/S, an unlocking of G2 cell cycle check-points and early low cell death rate. At later stage of exposure, persistent increases in heterochromatinization, large γ-H2AX foci and ß-galactosidase activity were detected providing evidence of cells' entrance into senescence. Similar potentialization was observed with neocarzinostatin (NCS), a radiomimetic drug. This original finding underlines a wide clinical potential of H-NDs to intensify radiation effects on radio-resistant cancer cells.