Effect of biofilm thickness on the activity and community composition of phosphorus accumulating bacteria in a moving bed biofilm reactor.

Can biofilms enhance the rates of phosphorus removal in wastewater treatment? In order to narrow the scientific gap on the effect of biofilm thickness on the activity and microbial community of phosphorus-accumulating bacteria, this study investigated biofilms of 30 to 1000 µm thickness in a moving bed biofilm reactor. Measurements on 5 different biofilm carriers showed that biomass-specific phosphorus release and uptake rates increased as a function of biofilm thickness for biofilms thinner than about 110 µm but were lower for thicker biofilms of about 550-1000 µm. The reduced phosphorus uptake and release rates in the thickest biofilms can result from substrate mass transfer limitations whereas the low activity in the thinnest biofilms can be related to a too high turnover rate in the biofilm due to heterotrophic growth. Additionally, the microbial ecology of the different biofilms confirms the observed phosphorus uptake and release rates. The results from the full-length 16S rRNA gene sequencing of the bacterial community showed that the thicker biofilms were characterized by higher relative abundance (40-58%) of potential phosphorus accumulating genera Zoogloea, Acinetobacter, Dechloromonas and Ca. Accumulibacter. In contrast, the thinner biofilms were dominated by the genus Ferribacterium (34-60%), which might be competing with phosphorus-accumulating bacteria as indicated by the relatively high acetate uptake rates in the thinner biofilms. It is concluded that there is an optimal biofilm thickness of 100-500 µm, at which the phosphorus accumulating bacteria have the highest activity.

Characterizing and comparing microbial community and biofilm structure in three nitrifying moving bed biofilm reactors.

This study investigated biofilm establishment, biofilm structure, and microbial community composition of biofilms in three laboratory-scale moving bed biofilm reactors. These reactors were filled with three types of plastic carriers with varied depths of living space for microbial growth. The reactors were operated under the same influent and operational conditions. Along with the operation, the results showed that carriers with grids of 50 µm in height delayed the biofilm development and formed the thinnest biofilm and a carpet-like structure with the lowest α-diversity. In comparison, another two carriers with grids of 200 and 400 µm in height formed thick biofilms and large colonies with more voids and channels. Quantified properties of biofilm thickness, biomass, heterogeneity, portion of the biofilm exposed to the nutrient, and maximum diffusion distance were examined, and the results demonstrated that they almost (except for heterogeneity) strongly correlated to the α-diversity of microbial community. These illustrate that depth of living space, as an important parameter for carrier, could drive the formation of biofilm structure and community composition. It improves understanding of influencing factors on biofilm establishment, structure and its microbial community, and would be helpful for the design of biofilm processes.

Thickness determines microbial community structure and function in nitrifying biofilms via deterministic assembly.

Microbial biofilms are ubiquitous in aquatic environments where they provide important ecosystem functions. A key property believed to influence the community structure and function of biofilms is thickness. However, since biofilm thickness is inextricably linked to external factors such as water flow, temperature, development age and nutrient conditions, its importance is difficult to quantify. Here, we designed an experimental system in a wastewater treatment plant whereby nitrifying biofilms with different thicknesses (50 or 400 µm) were grown in a single reactor, and thus subjected to identical external conditions. The 50 and 400 µm biofilm communities were significantly different. This beta-diversity between biofilms of different thickness was primarily caused by deterministic factors. Turnover (species replacement) contributed more than nestedness (species loss) to the beta-diversity, i.e. the 50 µm communities were not simply a subset of the 400 µm communities. Moreover, the two communities differed in the composition of nitrogen-transforming bacteria and in nitrogen transformation rates. The study illustrates that biofilm thickness alone is a key driver for community composition and ecosystem function, which has implications for biotechnological applications and for our general understanding of biofilm ecology.

The inhibitory effects of reject water on nitrifying populations grown at different biofilm thickness.

Suppression of nitrite oxidizing bacteria (NOB) is of vital importance to achieve successful, energy efficient, mainstream anammox processes for wastewater treatment. In this study, biofilm carriers from a fully nitrifying MBBR system, fed with mainstream wastewater, were temporarily exposed to reject water from sludge dewatering, to evaluate this as a possible strategy to inhibit NOB and achieve nitrite production under realistic conditions. Two different carrier types were compared, in which biofilm thickness was maintained at approximately 400 and 50 µm, respectively, and reject treatment was tested at different exposure time and loading rates. Reject exposure almost always resulted in an increased nitrite production in the thinner biofilm, and overall, nitrifiers growing in the thin biofilm were more sensitive than those grown in the thicker biofilm. The effect from reject exposure remained in the systems for four days after returning to mainstream operation, with nitrite production gradually increasing for three days. Increased concentrations of free ammonia correlated with reject exposure and may be the cause of inhibition, although other factors cannot be excluded.

Evaluating the effect of biofilm thickness on nitrification in moving bed biofilm reactors.

This study evaluates the effect of biofilm thickness on the nitrifying activity in moving bed biofilm reactors (MBBRs) in a controlled environment. In-depth understanding of biofilm properties in MBBRs and their effect on the overall treatment efficiency is the key to optimizing process stability and efficiency. However, evaluating biofilm properties in continuously operated MBBRs can be extremely challenging. This study uses a carrier design which enables comparison of four different biofilm thicknesses, in otherwise equally operated lab-scale MBBRs. The results show that within the studied range (200-500 µm) and specific operation conditions, biofilm thickness alone had no significant effect on the overall ammonium removal. The nitrate production, however, decreased with a decreasing biofilm thickness, and the ratio between nitrite and ammonia-oxidizing activity decreased both with increasing load and decreasing oxygen concentration for all thicknesses. The suggestion that nitratation is disfavoured in thin biofilms is an interesting contribution to the current research being performed on nitrite-oxidizing bacteria inhibition for deammonification applications. By indicating that different groups of bacteria respond differently to biofilm thickness, this study accentuates the importance of further evaluation of these complex systems.

Organic removal activity in biofilm and suspended biomass fractions of MBBR systems.

The moving bed biofilm reactor (MBBR) wastewater treatment process is usually designed based on the assumption that all activity in the process occurs in the biofilm on the MBBR carriers, although there is always some active biomass in the bulk liquid due to biofilm sloughing and, sometimes, free-growing bacteria. In this study the removal of organic matter is evaluated in laboratory-scale MBBR reactors under varying load, hydraulic retention time (HRT), oxygen concentration and volumetric filling degree of carriers in order to determine the heterotrophic activity in the different fractions of the MBBR biomass. The results showed that the heterotrophic conversions in an MBBR can show the same type of diffusion limited dependency on oxygen as nitrification, even for easily degradable substrates such as acetate. The contribution to the removal from the suspended biomass is shown to vary depending on HRT, as the amount of suspended solids changes. The developed method in this report is a useful tool for determining heterotrophic activity in the separate fractions of biomass in MBBRs.