Biodegradable starch foams reinforced by food-chain side streams.

Biodegradable starch foam trays offer an eco-friendly substitute for petroleum-based single-use packaging, notably polystyrene foams. However, they lack flexibility, tensile strength, and water-sensitivity, addressable through lignocellulosic reinforcement. This study aimed to develop biodegradable starch foam trays filled with different food-chain side streams for sustainable alternative packaging. Corncob, soybean straw, cassava peel, araucaria seed hull, yerba mate stalks and yerba mate leaves petiole were collected, dried and ground to <250 µm. The trays were filled with 13 % (w/w) of each food-chain side streams and produced by hot molding. The trays morphology, moisture, water activity (aw), thickness, bulk density, tensile strength, elongation at break, Young's modulus, bending strength, maximum deflection, and sorption isotherms were investigated. Reinforcements slightly increased the foams bulk density, reduced the tensile strength and maximum deflection and while bending strength increased from 0.20 MPa to 1.17-1.80 MPa. The elasticity modulus decreased by adding any filling, that resulted in ductility improvement; however, these packaging have moisture-sensitive material especially for aw higher than 0.52, which drives the use recommendation for dry products storage or shipping/transport. The biodegradable starch foam trays filled with side streams were successfully produced and offer excellent alternative to petroleum-based packaging low-density material with bending strength improved.

Efficient Anthocyanin Recovery from Black Bean Hulls Using Eutectic Mixtures: A Sustainable Approach for Natural Dye Development.

There is a growing interest in exploring new natural sources of colorants. This study aimed to extract anthocyanins from broken black bean hulls (Phaseolus vulgaris L.) by modifying water with a eutectic mixture (choline chloride:citric acid (ChCl:Ca)). Ultrasound-assisted extraction (UAE) was employed and optimized in terms of temperature (30-70 °C), ultrasound power (150-450 W), and eutectic mixture concentration in water (1-9% (w/v)), resulting in an optimal condition of 66 °C, 420 W, and 8.2% (w/v), respectively. The main quantified anthocyanins were delphinidin-3-O-glycoside, petunidin-3-O-glycoside, and malvidin-3-O-glycoside. The half-life of the anthocyanins at 60 °C increased twelvefold in the eutectic mixture extract compared to the control, and when exposed to light, the half-life was 10 times longer, indicating greater resistance of anthocyanins in the extracted eutectic mixture. Additionally, the extracts were concentrated through centrifuge-assisted cryoconcentration, with the initial cycle almost double the extract value, making this result more favorable regarding green metrics. The first concentration cycle, which showed vibrant colors of anthocyanins, was selected to analyze the color change at different pH levels. In general, the technology that uses eutectic mixtures as water modifiers followed by cryoconcentration proved to be efficient for use as indicators in packaging, both in quantity and quality of anthocyanins.

Critical Issues on the Surface Functionalization of Plasmonic Au-Ag/TiO2 Thin Films with Thiolated Oligonucleotide-Based Biorecognition Elements.

This work reports on the surface functionalization of a nanomaterial supporting localized surface plasmon resonances (LSPRs) with (synthetic) thiolated oligonucleotide-based biorecognition elements, envisaging the development of selective LSPR-based DNA biosensors. The LSPR thin-film transducers are composed of noble metal nanoparticles (NPs) embedded in a TiO2 dielectric matrix, produced cost-effectively and sustainably by magnetron sputtering. The study focused on the immobilization kinetics of thiolated oligonucleotide probes as biorecognition elements, followed by the evaluation of hybridization events with the target probe. The interaction between the thiolated oligonucleotide probe and the transducer's surface was assessed by monitoring the LSPR signal with successive additions of probe solution through a microfluidic device. The device was specifically designed and fabricated for this work and adapted to a high-resolution LSPR spectroscopy system with portable characteristics. Benefiting from the synergetic characteristics of Ag and Au in the form of bimetallic nanoparticles, the Au-Ag/TiO2 thin film proved to be more sensitive to thiolated oligonucleotide binding events. Despite the successful surface functionalization with the biorecognition element, the detection of complementary oligonucleotides revealed electrostatic repulsion and steric hindrance, which hindered hybridization with the target oligonucleotide. This study points to an effect that is still poorly described in the literature and affects the design of LSPR biosensors based on nanoplasmonic thin films.

Dietary Polyphenols: What is the Estimated Intake in Population Studies With Adults and Elderly People?

Estimates of dietary intake of polyphenols have been limited to specific samples from certain population groups, and different databases have been used to quantify the levels of these compounds, which makes it difficult to compare results. PURPOSE OF REVIEW: This review collated estimates of polyphenol intake from population studies including adults and elderly from different parts of the world by using a single database: Phenol-Explorer. RECENT FINDINGS: Through seven population-based studies performed in five different countries, it was possible to identify that Brazil was the country with the lowest intake of polyphenols, whereas Poland had the highest dietary intake. The most ingested subclasses of polyphenols in different countries were phenolic acids and flavonoids, and non-alcoholic beverages (coffee, tea, and orange juice) were the foods that most contributed to the intake of polyphenols. Despite the attempt to standardize this study to obtain worldwide intake estimates that could be comparable, gaps were found regarding the assessment of food consumption, standardization to obtain the polyphenol content of foods in Phenol-Explorer, calculation in aglycone equivalents, and caloric adjustment of the estimates. There is a need for more studies on the dietary polyphenols intake of representative samples of populations from different countries to collate more data on the quantities consumed and the main contributing foods.

Changes in motor evoked potentials after erector spinae block in scoliosis surgery-when to take pre-incision baseline recordings?

Multimodal intraoperative neurophysiological monitoring (IONM) is highly valuable in scoliosis surgeries for monitoring spinal cord function, particularly during instrumentation. Accurate timing of baseline recordings of TcMEP and SSEP is crucial, as any changes observed during surgery and instrumentation are compared to these baseline recordings. However, the impact of ultrasound-guided erector spinae block (USG-ESPB) on SSEP and TcMEP is not well-studied in scoliosis surgery. In this report, we present two cases of scoliosis surgery where bilateral two-level USG-ESPB using different concentrations of ropivacaine (0.375% and 0.2%) resulted in a transient and significant deterioration of TcMEP, occurring 3 minutes after the block and lasting for 20 minutes. Remarkably, SSEPs remained unchanged during this period. These findings suggest that USG-ESPB may produce TcMEP changes, highlighting the importance of carefully considering the timing of baseline TcMEP acquisition in scoliosis surgery.

Hydrogel properties of non-conventional starches from guabiju, pinhão, and uvaia seeds.

The physicochemical properties of starch vary depending on the botanical sources, thereby influencing the gelatinisation/retrogradation properties and subsequently affecting the hydrogels characteristics. This study aimed to assess the influence of botanical sources influence on starch and hydrogel properties using non-conventional starch derived from guabiju, pinhão, and uvaia seeds. Hydrogels were prepared by starch gelatinisation followed by 6 h ageing period at room temperature (20 ± 2 °C) and subjected to five freeze-thaw cycles. Pinhão starch exhibited a higher viscosity peak and breakdown, along with a lower final viscosity and setback, compared to guabiju and uvaia starches. The significantly different pasting properties influenced the porous microstructure, water absorption (p-value: 0.01), and resistance of the hydrogels (p-value: 0.01). The guabiju starch hydrogels showed a uniform pore structure without cavities, whereas pinhão and uvaia starch hydrogels exhibited agglomerated and spongy pore structures. Furthermore, the guabiju starch hydrogel demonstrated the lowest water absorption (4.56 g/g) and the highest compression resistance (1448.50 g) among all the studied starch hydrogels. In contrast, the pinhão starch hydrogel showed the highest water absorption (7.43 g/; p-value: 0.01) among all studied starch hydrogels. The hardness of uvaia starch hydrogel did not differ significantly from the guabiju and pinhão starch hydrogel. The different non-conventional starches reveal important variations in the hydrogels characteristics. This provides insights into how amylose and amylopectin interact and present alternatives for using these unique starch-based hydrogels in diverse applications.

Yerba Mate (Ilex paraguariensis) Processing and Extraction: Retention of Bioactive Compounds.

Ilex paraguariensis is a native tree from South America known for the presence of bioactive compounds, and its processed leaves are consumed as hot and cold infusions. After harvest (step 1), the leaves are subjected to flame blanching to inactive the enzymes (step 2), followed by drying and milling (step 3). The impacts of I. paraguariensis processing on leaf composition were investigated by extracting the major compounds (chlorogenic and isochlorogenic acids (3-CQA, 4-CQA, 5-CQA, 3,4-DQA, 3,5-DQA and 4,5-DQA), p-coumaric acid, caffeine and rutin) using different ratios of ethanol and water as extraction solvent (EW 25:75, 50:50, and 75:25 (w/w)). The solvent ratio of EW 50:50 was more effective in extracting the chlorogenic acids isomers, with retention of chlorogenic acids of 3463, 9485, and 9516 µg mL- 1 for steps 1, 2, and 3, respectively. Rutin and p-coumaric acid exhibited similar behavior with the increment of processing steps; however, p-coumaric acid was only detected in steps 2 and 3 for the solvent ratios EW 50:50 and 25:50. The caffeine extraction from I. paraguariensis varied from 936 to 1170 µg mL- 1 for all processing steps, with emphasis on its concentration extracted in step 1. The evolution of processing steps led to a higher retention of phenolic compounds from I. paraguariensis, which was not observed when using different solvent ratios, and the solvent ratio EW 50:50 was more effective for the extraction of chlorogenic acids. The successful extraction of chlorogenic acids from I. paraguariensis in this study proved to be a promising alternative for the use of yerba mate beyond the cuia cup.

Technical note: pre-positioning lower limb SSEP during semi-sitting positioning in posterior fossa surgery- does it matter?

Intra-operative monitoring has been a crucial tool in modern neurosurgery as it allows to optimize surgical outcome whilst reducing neurological deficits. Somatosensory evoked potentials are routinely monitored in most spinal and brain surgeries due to providing invaluable information regarding the functional integrity of sensory pathways. The use of this neurophysiological technique is particular useful when positioning patients in semi-sitting position during posterior fossa surgery. However, there is general agreement within the intra-operative neuromonitoring community that either upper or lower limb SSEPs monitoring typically suffice. Nonetheless, we report a case study of a patient in whom lower limb SSEPs were independently affected from upper limb SSEPs during positioning. In this respect, we suggest that both upper and lower limb SSEPs monitoring should be considered during semi-sitting positioning in patients undergoing posterior fossa surgery.

After the Knife: A Detailed Roadmap for Vestibular Schwannoma Resection in the Semi-Sitting Position - How I do it.

BACKGROUND: Vestibular schwannoma surgery remains a neurosurgical challenge, with known risks, dependent on a number of factors, from patient selection to surgical experience of the team. The semi-sitting position has gained popularity as an alternative to the traditional supine position for vestibular schwannoma resection due to potential advantages such as improved surgical exposure due to clearer surgical field and anatomical orientation. However, there is a lack of standardized protocols for performing the procedure in the semi-sitting position, leading to variations in surgical techniques and outcomes. METHODS: In this study, we aimed to establish a standardized approach for vestibular schwannoma resection using the semi-sitting position. Initiating after final position for semi-sitting, the authors have divided the surgical steps into five major parts for improved understanding and replication. Surgical techniques were analyzed through one hundred steps to identify commonalities, determining the optimal procedural steps for the semi-sitting position using surgical video for visual conceptualization. RESULTS: The analysis described one hundred steps for vestibular schwannoma resection in the semi-sitting position, with visual demonstration of the various parts of the procedure through surgical videos. Specific recommendations for each step were outlined, including appropriate approach, monitoring strategies, and tumor and posterior fossa structures manipulation. Five major parts of the procedure were identified, leading to a reproducible standardization of the surgical procedure of vestibular schwannoma resection in the semi-sitting position. CONCLUSIONS: This study provides a comprehensive standardized protocol for the semi-sitting procedure in vestibular schwannoma resection. By establishing a consistent approach, surgeons can minimize variations in surgical techniques and improve patient outcomes. The identified steps and recommendations can serve as a valuable resource for surgical teams involved in vestibular schwannoma resection and facilitate the dissemination and reproducibility of best practices.

Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments.

Biofouling is the major factor that limits long-term monitoring studies with automated optical instruments. Protection of the sensing areas, surfaces, and structural housing of the sensors must be considered to deliver reliable data without the need for cleaning or maintenance. In this work, we present the design and field validation of different techniques for biofouling protection based on different housing materials, biocides, and transparent coatings. Six optical turbidity probes were built using polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), PLA with copper filament, ABS coated with PDMS, ABS coated with epoxy and ABS assembled with a system for in situ chlorine production. The probes were deployed in the sea for 48 days and their anti-biofouling efficiency was evaluated using the results of the field experiment, visual inspections, and calibration signal loss after the tests. The PLA and ABS were used as samplers without fouling protection. The probe with chlorine production outperformed the other techniques, providing reliable data during the in situ experiment. The copper probe had lower performance but still retarded the biological growth. The techniques based on transparent coatings, epoxy, and PDMS did not prevent biofilm formation and suffered mostly from micro-biofouling.

Before the Knife: A Detailed Step-by-Step Description of an Optimized Semi-Sitting Position in Posterior Fossa Surgery.

BACKGROUND: In an ample armamentarium in neurosurgery, the semi-sitting position has produced debate regarding its benefits and risks. Although the position is apparently intuitive, many have abandoned its use since its initial inception, because of reported complexity and potential complications, leading to impracticality. However, through standardization, it has been shown not only to be safe but to carry with it many advantages, including less risk of secondary neurovascular injuries and better visualization of the surgical field. As with any surgical technical nuance, the semi-sitting position has advantages and disadvantages that must be weighed before the decision is made to adopt it or not, not only in a case-by-case scenario but also from a departmental standpoint. As we attempt to show, the advantages from a standardized approach for the semi-sitting position in experienced institutions may be more than sufficient to significantly outweigh the disadvantages, making it the preferable option for most, although not all, posterior fossa surgical interventions. METHODS: In the present study, we aim to elaborate a straightforward narrative of the steps before incision, in an attempt to simplify the complexity of the position, alleviating its disadvantages and exponentially concentrating on its benefits. In nearly 100 steps, we carefully describe the points that culminate with the skin incision, initiating the intraoperative part of the procedure. Each step, therefore, is detailed in full, not in an effort to create a strict manual of the semi-sitting position but rather to facilitate understanding and put the technique into effect in a real-life scenario, thus simplifying what some depict as complex and time consuming. CONCLUSIONS: Although several of the steps described are also relevant and integral parts of other surgical positioning, we intend to create a protocol, in a stepwise fashion, to allow facilitated following, to be easily implemented in departments with different levels of experience. The steps comprise nursing care through to electrophysiologic and anesthesiologic approaches, along with neurosurgical cooperation, making it a team approach, not only to avoid position-related complications but also to optimize preoperative standardization, constructing a safe, efficient, and patient-centered scenario, to set the best possible stage for the next step: the intraoperative part of the intervention.

Fruit pomace as a promising source to obtain biocompounds with antibacterial activity.

The demand for natural compounds to replace synthetic additives has aroused the interest of different sectors of society, especially the scientific community, due to their safety, biocompatibility, biodegradability and low toxicity. Alternative sources for antimicrobial compounds have been explored, such as fruit pomace. These by-products have essential compounds in their composition with different potential for application in food and packaging. In this context, this review systematizes the use of pomace from different fruits as a source of antibacterial compounds. Also, it summarizes the extraction methods and the applications of these compounds. Grape pomace, cranberry, and apple extracts are the most explored for antibacterial control, especially against genus Listeria, Salmonella, Staphylococcus, and Escherichia. In addition, phenolic acids, anthocyanins, flavonoids, and proanthocyanins are the main compounds identified in the studied fruit pomace extracts. In the reviewed articles, the biocompounds recovery is performed by methods with the absence of high temperatures (>80 °C); in some studies, the solid-liquid extraction method at mild temperatures (<30 °C) was well explored, using ethanol and water as solvent. The use of fruit processing by-products for bacterial control highlights the possibility of favoring the three pillars of sustainability (social, economic, and environmental) in the food industry.

Pandemic-Related Impairment in the Monitoring of Patients With Hypertension and Diabetes and the Development of a Digital Solution for the Community Health Worker: Quasiexperimental and Implementation Study.

BACKGROUND: The restrictions imposed by the COVID-19 pandemic reduced health service access by patients with chronic diseases. The discontinuity of care is a cause of great concern, mainly in vulnerable regions. OBJECTIVE: This study aimed to assess the impact of the COVID-19 pandemic on people with hypertension and diabetes mellitus (DM) regarding the frequency of consultations and whether their disease was kept under control. The study also aimed to develop and implement a digital solution to improve monitoring at home. METHODS: This is a multimethodological study. A quasiexperimental evaluation assessed the impact of the pandemic on the frequency of consultations and control of patients with hypertension and DM in 34 primary health care centers in 10 municipalities. Then, an implementation study developed an app with a decision support system (DSS) for community health workers (CHWs) to identify and address at-risk patients with uncontrolled hypertension or DM. An expert panel assessment evaluated feasibility, usability, and utility of the software. RESULTS: Of 5070 patients, 4810 (94.87%) had hypertension, 1371 (27.04%) had DM, and 1111 (21.91%) had both diseases. There was a significant reduction in the weekly number of consultations (107, IQR 60.0-153.0 before vs 20.0, IQR 7.0-29.0 after social restriction; P<.001). Only 15.23% (772/5070) of all patients returned for a consultation during the pandemic. Individuals with hypertension had lower systolic (120.0, IQR 120.0-140.0 mm Hg) and diastolic (80.0, IQR 80.0-80.0 mm Hg) blood pressure than those who did not return (130.0, IQR 120.0-140.0 mm Hg and 80.0, IQR 80.0-90.0 mm Hg, respectively; P<.001). Also, those who returned had a higher proportion of controlled hypertension (64.3% vs 52.8%). For DM, there were no differences in glycohemoglobin levels. Concerning the DSS, the experts agreed that the CHWs can easily incorporate it into their routines and the app can identify patients at risk and improve treatment. CONCLUSIONS: The COVID-19 pandemic caused a significant drop in the number of consultations for patients with hypertension and DM in primary care. A DSS for CHW has proved to be feasible, useful, and easily incorporated into their routines.

Micropigmentação Dérmica na Reconstrução do Complexo Aréolo-papilar: Revisão Integrativa da Literatura / Dermal Micropigmentation for the Nipple-areolar Complex Reconstruction: Integrative Literature Review / Micropigmentación Dérmica en la Reconstrucción del Complejo Areola-papilar: Revisión Integradora de la Literatura

Introdução: A micropigmentação dérmica comumente conhecida como tatuagem é uma técnica de reconstrução do complexo aréolo- -papilar desde 1986. Objetivo: Identificar na literatura científica evidências sobre a prática de micropigmentação dérmica à reconstrução do complexo aréolo-papilar em mulheres tratadas por câncer de mama. Método: Revisão integrativa com busca nas bases de dados PubMed, SciELO e LILACS. A partir dos critérios de elegibilidade, foram selecionados 14 artigos. A revisão foi relatada segundo os critérios do PRISMA e o nível de evidência classificado segundo o Centro para Medicina Baseada em Evidências de Oxford. Resultados: Na literatura consultada, 71,4% dos estudos são de nível quatro de evidência. Foram sintetizados os achados em quatro categorias: 1) micropigmentação dérmica como método de escolha; 2) período recomendado para realização da micropigmentação; 3) etapas da micropigmentação dérmica; 4) reações esperadas e adversas da micropigmentação. Conclusão: A micropigmentação dérmica é uma técnica que tem proporcionado benefícios psicossociais para as mulheres e oferece à paciente uma aréola com aspecto próximo ao natural, por meio de um procedimento seguro, rápido, raramente doloroso e com baixo risco de complicações, quando garantidas as medidas de biossegurança. As decisões no processo devem ser baseadas por evidências e tomadas em conjunto com as pacientes, respeitando desejos e informando riscos e benefícios

Introduction: Since 1986, dermal micropigmentation commonly known as tattooing has been a technique for reconstruction of the nipple-areola complex. Objective: To identify scientific evidence in the literature on the practice of dermal micropigmentation for reconstruction of the nipple-areola complex in women treated for breast cancer. Method: Integrative review upon search in the databases PubMed, SciELO and LILACS resulting in 14 articles selected according to the eligibility criteria. The review was reported according to PRISMA criteria, and the level of evidence classified according to the Oxford Center for Evidence-Based Medicine criteria. Results: 71.4% of the studies presented level four of evidence. The findings were synthesized in four categories: 1) dermal micropigmentation as the method of choice; 2) recommended period for micropigmentation; 3) steps of dermal micropigmentation; 4) expected and adverse reactions from micropigmentation. Conclusion: Dermal micropigmentation is a technique that has provided psychosocial benefits for women and offers the patient an areola with a natural appearance through a safe, fast, rarely painful procedure with low risk of complications, if biosafety measures are in place. Decisions in the process should be evidence-based and taken together with patients, respecting their wishes and sharing risks and benefits

Introducción: La micropigmentación dérmica comúnmente conocida como tatuaje ha sido una técnica para reconstruir el complejo areola-pezón desde 1986. Objetivo: Identificar evidencia en la literatura científica sobre la práctica de la micropigmentación dérmica para la reconstrucción del complejo areola-pezón en mujeres tratadas por cáncer de mama. Método: Revisión integrativa con búsqueda en bases de datos PubMed, SciELO y LILACS. Con base en los criterios de elegibilidad, se seleccionaron 14 artículos. La revisión se informó de acuerdo con los criterios PRISMA y el nivel de evidencia clasificado de acuerdo con el Centro de Medicina basada en la evidencia de Oxford. Resultados: En la literatura consultada, el 71,4% de los estudios tienen nivel de evidencia cuatro. Fueron sintetizados los hallazgos en cuatro categorías: 1) micropigmentación dérmica como método de elección; 2) período recomendado de micropigmentación; 3) pasos de micropigmentación dérmica; 4) reacciones adversas y esperadas por micropigmentación. Conclusión: La micropigmentación dérmica es una técnica que ha brindado beneficios psicosociales para la mujer y ofrece a la paciente una areola con apariencia natural, a través de un procedimiento seguro, rápido, rara vez doloroso y con bajo riesgo de complicaciones, cuando las medidas de bioseguridad están garantizadas. Las decisiones en el proceso deben basarse en pruebas y tomarse junto con los pacientes, respetando los deseos e informando los riesgos y beneficios

Impact of COVID-19 on the Mental Health of Medical Students in Portugal.

(1) Background: The purpose of this article is to assess the impact of the COVID-19 pandemic on the mental health of medical students in Portugal in the period after returning to face-to-face classes during the COVID-19 pandemic, in the 2020/2021 academic year. (2) Methods: We conducted an observational, descriptive, and cross-sectional study, between December 2020 and February 2021 with a representative sample of Portuguese medical students (n = 649), applying an anonymous questionnaire which was composed by a sociodemographic characterization, The Brief Symptoms Inventory-18, The Fear of COVID-19 Scale and the Negative Impact Assessment Scale. For statistical processing, Statistical Package for Social Sciences (SPSS ©) was used. (3) Results: 65.3% of participants said that self-perceived relevant anxiety symptoms, and around 10% said that they had a physical or a mental illness diagnosis. Significant differences (p < 0.05) were found for Fear of COVID-19, Somatization, Anxiety and Overall Mental Health, indicating that women, students from the 1st and last years of training had higher scores. Age, year of training, Fear of COVID-19 and Negative Impact of COVID-19 were significant predictors of overall mental health. (4) Conclusion: In our sample of Portuguese medical students, age, year of training, but mostly fear of COVID-19 and the negative impact of COVID-19 contributed to mental health symptoms.

PtOEP-PDMS-Based Optical Oxygen Sensor.

The advanced and widespread use of microfluidic devices, which are usually fabricated in polydimethylsiloxane (PDMS), requires the integration of many sensors, always compatible with microfluidic fabrication processes. Moreover, current limitations of the existing optical and electrochemical oxygen sensors regarding long-term stability due to sensor degradation, biofouling, fabrication processes and cost have led to the development of new approaches. Thus, this manuscript reports the development, fabrication and characterization of a low-cost and highly sensitive dissolved oxygen optical sensor based on a membrane of PDMS doped with platinum octaethylporphyrin (PtOEP) film, fabricated using standard microfluidic materials and processes. The excellent mechanical and chemical properties (high permeability to oxygen, anti-biofouling characteristics) of PDMS result in membranes with superior sensitivity compared with other matrix materials. The wide use of PtOEP in sensing applications, due to its advantage of being easily synthesized using microtechnologies, its strong phosphorescence at room temperature with a quantum yield close to 50%, its excellent Strokes Shift as well as its relatively long lifetime (75 µs), provide the suitable conditions for the development of a miniaturized luminescence optical oxygen sensor allowing long-term applications. The influence of the PDMS film thickness (0.1-2.5 mm) and the PtOEP concentration (363, 545, 727 ppm) in luminescent properties are presented. This enables to achieve low detection levels in a gas media range from 0.5% up to 20%, and in liquid media from 0.5 mg/L up to 3.3 mg/L at 1 atm, 25 °C. As a result, we propose a simple and cost-effective system based on a LED membrane photodiode system to detect low oxygen concentrations for in situ applications.

Carioca bean starch upon synergic modification: characteristics and films properties.

BACKGROUND: The use of damaged beans for starch isolation comprises an end-use alternative for a product that is not accepted by the consumer. For that reason, isolation and modification of Carioca bean starch should be explored and evaluated as a suitable source for biodegradable material. The present study aimed to evaluate the synergism of physical and chemical modifications on Carioca bean starch with respect to improving the properties of biodegradable films. A heat-moisture treatment (HMT) followed by oxidation by sodium hypochlorite was performed and vice versa. RESULTS: Synergism was noted in the starch properties compared to the single modification. When the oxidation was applied first, a higher amylose and carbonyl content was noted. HMT, isolated and as a second modification, caused a more pronounced effect on viscosity profile than the oxidized starch, with an increase in paste temperature and a decrease in viscosity, breakdown and final viscosity. CONCLUSION: The results obtained in the present study reflect a decrease in water vapor permeability, although a higher tensile strength was noted when oxidation was applied, as a single and as a first modification. © 2020 Society of Chemical Industry.

Development and Implementation of a Decision Support System to Improve Control of Hypertension and Diabetes in a Resource-Constrained Area in Brazil: Mixed Methods Study.

BACKGROUND: The low levels of control of hypertension and diabetes mellitus are a challenge that requires innovative strategies to surpass barriers of low sources, distance, and quality of health care. OBJECTIVE: The aim of this study is to develop a clinical decision support system (CDSS) for diabetes and hypertension management in primary care, to implement it in a resource-constrained region, and to evaluate its usability and health care practitioner satisfaction. METHODS: This mixed methods study is a substudy of HealthRise Brazil Project, a multinational study designed to implement pilot programs to improve screening, diagnosis, management, and control of hypertension and diabetes among underserved communities. Following the identification of gaps in usual care, a team of clinicians established the software functional requirements. Recommendations from evidence-based guidelines were reviewed and organized into a decision algorithm, which bases the CDSS reminders and suggestions. Following pretesting and expert panel assessment, pilot testing was conducted in a quasi-experimental study, which included 34 primary care units of 10 municipalities in a resource-constrained area in Brazil. A Likert-scale questionnaire evaluating perceived feasibility, usability, and utility of the application and professionals' satisfaction was applied after 6 months. In the end-line assessment, 2 focus groups with primary care physicians and nurses were performed. RESULTS: A total of 159 reminders and suggestions were created and implemented for the CDSS. At the 6-month assessment, there were 1939 patients registered in the application database and 2160 consultations were performed by primary care teams. Of the 96 health care professionals who were invited for the usability assessment, 26% (25/96) were physicians, 46% (44/96) were nurses, and 28% (27/96) were other health professionals. The questionnaire included 24 items on impressions of feasibility, usability, utility, and satisfaction, and presented global Cronbach α of .93. As for feasibility, all professionals agreed (median scores of 4 or 5) that the application could be used in primary care settings and it could be easily incorporated in work routines, but physicians claimed that the application might have caused significant delays in daily routines. As for usability, overall evaluation was good and it was claimed that the application was easy to understand and use. All professionals agreed that the application was useful (score 4 or 5) to promote prevention, assist treatment, and might improve patient care, and they were overall satisfied with the application (median scores between 4 and 5). In the end-line assessment, there were 4211 patients (94.82% [3993/4211] with hypertension and 24.41% [1028/4211] with diabetes) registered in the application's database and 7960 consultations were performed by primary health care teams. The 17 participants of the focus groups were consistent to affirm they were very satisfied with the CDSS. CONCLUSIONS: The CDSS was applicable in the context of primary health care settings in low-income regions, with good user satisfaction and potential to improve adherence to evidence-based practices.

Bioactive Compounds from Jambolan (Syzygium cumini (L.)) Extract Concentrated by Ultra- and Nanofiltration: a Potential Natural Antioxidant for Food.

Jambolan is an unexplored fruit rich in bioactive compounds like anthocyanins, catechin, and gallic acid. Thus, the extraction of bioactive compounds allows adding value to the fruit. In this context, the present study reports the recovery and concentration of jambolan fruit extract by ultra and nanofiltration for the first time. Acidified water was used to extract polyphenols from the pulp and peel of jambolan. The extracts were concentrated using ultrafiltration and nanofiltration membranes with nominal molecular weight cut-off ranging from 180 to 4000 g mol-1. Total monomeric anthocyanin, total phenolic compounds, and antioxidant capacity were analyzed. Phenolic compounds were quantified, and anthocyanins were identified by high-performance liquid chromatography coupled to diode-array detection and mass spectrometry (HPLC-DAD-MS). Concentration factors higher than 4.0 were obtained for anthocyanins, gallic acid, and catechin after nanofiltration of the extracts. Other compounds such as epicatechin, p-Coumaric acid, and ferulic acid were quantified in the concentrated extract, and the main anthocyanins identified were 3,5-diglucoside: petunidin, malvidin, and delphinidin. Therefore, jambolan extract showed a high potential to be used as a natural dye and antioxidant in food products.

Red araçá pulp microencapsulation by hydrolyzed pinhão starch, and tara and arabic gums.

BACKGROUND: Red araçá is a Brazilian native species whose fruits are rich in phenolic acids, flavonoids, anthocyanins, and carotenoids. To preserve the properties of compounds during processing, red araçá pulp (RAP) was encapsulated by hydrolyzed pinhão starch (PS), tara gum (TG), and arabic gum (AG) in different blends in equal proportions, serving as a coating material. RESULTS: Fresh RAP had a gallic acid equivalent of 3098 mg per 100 g of dry weight, 156.29 µg ß-carotene per gram of dry weight, total anthocyanins of 18 mg per 100 g of dry weight and exhibited high antioxidant activity. The highest encapsulation efficiency achieved with the PS, TG, and AG blend was 80.4% for the total carotenoids, and that for the total anthocyanins was 76% with the TG and AG blend. Only one step of antioxidant activity degradation was identified, and the carrier system PSTG was efficient at maintaining the antioxidant activity, with half-life of 23.60-37.27 days. CONCLUSION: The use of PS alone as a coating material or associated with TG and AG gums resulted in improved retention of bioactive compounds, these being an excellent alternative coating material since they improved the stability of the antioxidant activity of RAP. © 2020 Society of Chemical Industry.