Comparing visual inspection methods for parenteral products in hospital pharmacy: between reliability, cost, and operator formation considerations.

INTRODUCTION: The COVID-19 pandemic has led to unforeseen and novel manifestations, as illustrated by the management of drug shortages through the development of hospital production of sterile pharmaceutical preparations (P2S). Visual inspection of P2S is a release control whose methods are described in monographs of the European Pharmacopoeia (2.9.20) and the United States Pharmacopeia (1790). However, these non-automated visual methods require training and proficiency testing of personnel. The main objective of this work was to compare the reliability and speed of analysis of two visual methods and an automated method for detecting visible particles by image analysis in P2S. Furthermore, these methods were used to evaluate sources of particulate contamination during pre-production processes (washing, disinfection, depyrogenation) and production (filling, capping). MATERIALS AND METHODS: Three pharmacy technicians examined 41 clear glass vials of type I, 10 and/or 50 mL through manual visual inspection (MVI), semi-automated (SAVI), and automated (AVI) inspection. The vials were distributed as follows: (i) 16 vials of water for injection containing either glass particles (224 µm or 600 µm), stopper fragments, or textile fibres; (ii) five sterile injectable specialties; (iii) 20 vials of water for injection prepared under different pre-production conditions. RESULTS AND DISCUSSION: MVI and SAVI detected 100% of visible particles compared with 28% for AVI, which showed a deficiency in detecting textile fibres. All three methods correctly analysed P2S that did not contain visible particles. The three methods detected particles in vials maintained under International Organization for Standardization (ISO) 9 pre-production conditions. However, detections by (i) MVI and SAVI, and by (ii) AVI of particles contained in vials maintained under ISO 8 pre-production conditions were deemed satisfactory and unsatisfactory, respectively. CONCLUSION: The importance of visual inspection of P2S requires rapid, sensitive, and reliable detection methods. In this context, MVI and SAVI have proven to be more effective than AVI for a more competitive financial, training, and implementation investment.

Predictive stability, novel HPLC-MS analysis and semi-automatic compounding process for the emergency implementation of a production line of pancuronium in injectable solution.

During the early months of the COVID-19 pandemic, the international medical product supply chain was tight, causing breaks in the availability of neuromuscular blocking agents essential for the treatment of patients in intensive care units. The present study describes the pharmaceutical development of an injectable 2 mg/mL solution of pancuronium bromide (PC) in a very short lapse of time. The sterile solution was compounded into a good manufacturing practice grade A clean room, filtered (0.2 µm) and filled into 10 mL type I glass, manually sealed with bromobutyl rubber stoppers. A novel HPLC-MS stability indicating method for pancuronium quantification and its degradation product was developed and validated. This fast, sensitive and straightforward method was used to study the stability of the formulation using a semi-predictive method, enabling a very fast attribution of a temporary shelf-life, which was confirmed by a classic prospective stability study. The production line and the analytical tools set-up were performed in six weeks and the semi-predictive stability study was conducted in 90 days, allowing us to predict a shelf life, which was successfully confirmed by prospective study. In conclusion, using innovative methods, we were able to rapidly overcome the shortage of a critical drug.

Effects of pro-inflammatory cytokines and cell interactions on cell area and cytoskeleton of rheumatoid arthritis synoviocytes and immune cells.

Rheumatoid synovitis is infiltrated by immune cells that interact with synoviocytes, leading to the pannus formation. Inflammation or cell interaction effects are mainly evaluated with cytokine production, cell proliferation or migration. Few studies interest on cell morphology. Here, the purpose was to deepen some morphological changes of synoviocytes or immune cells under inflammatory conditions. Inflammatory cytokines, IL-17 and TNF that are largely involved in RA pathogenesis, induced a change in synoviocyte morphology, inducing a retracted cell with higher number of pseudopodia. Several morphological parameters decreased in inflammatory conditions: cell confluence, area and motility speed. The same impact on cell morphology was observed in co-culture of synoviocytes and immune cells in inflammatory/non-inflammatory conditions or with cell activation (miming the in vivo situation), affecting both cell types: synoviocytes were retracted and inversely immune cells proliferated, indicating that cell activation induced a morphological change of cells. In contrast, with RA but not control synoviocytes, cell interactions were not sufficient to affect PBMC and synoviocyte morphology. The morphological effect came only from the inflammatory environment. These findings reveal that the inflammatory environment or cell interactions induced massive changes in control synoviocytes, with cell retraction and increase of pseudopodia number, leading to better interactions with other cells. Except in the case of RA, the inflammatory environment was absolutely required for such changes.

Morphological and Mechanical Characterization of Extracellular Vesicles and Parent Human Synoviocytes under Physiological and Inflammatory Conditions.

The morphology of fibroblast-like synoviocytes (FLS) issued from the synovial fluid (SF) of patients suffering from osteoarthritis (OA), rheumatoid arthritis (RA), or from healthy subjects (H), as well as the ultrastructure and mechanical properties of the FLS-secreted extracellular vesicles (EV), were analyzed by confocal microscopy, transmission electron microscopy, atomic force microscopy, and tribological tests. EV released under healthy conditions were constituted of several lipid bilayers surrounding a viscous inner core. This "gel-in" vesicular structure ensured high mechanical resistance of single vesicles and good tribological properties of the lubricant. RA, and to a lesser extent OA, synovial vesicles had altered morphology, corresponding to a "gel-out" situation with vesicles surrounded by a viscous gel, poor mechanical resistance, and poor lubricating qualities. When subjected to inflammatory conditions, healthy cells developed phenotypes similar to that of RA samples, which reinforces the importance of inflammatory processes in the loss of lubricating properties of SF.

Phage Therapy against Staphylococcus aureus: Selection and Optimization of Production Protocols of Novel Broad-Spectrum Silviavirus Phages.

Background: Phage therapy a promising antimicrobial strategy to address antimicrobial resistance for infections caused by the major human pathogen Staphylococcus aureus. Development of therapeutic phages for human use should follow pharmaceutical standards, including selection of strictly lytic bacteriophages with high therapeutic potential and optimization of their production process. Results: Here, we describe three novel Silviavirus phages active against 82% of a large collection of strains (n = 150) representative of various methicillin-susceptible and -resistant S. aureus clones circulating worldwide. We also investigated the optimization of the efficiency and safety of phage amplification protocols. To do so, we selected a well-characterized bacterial strain in order to (i) maximize phage production yields, reaching phage titres of 1011 PFU/mL in only 4 h; and (ii) facilitate phage purity while minimizing the risk of the presence of contaminants originating from the bacterial host; i.e., secreted virulence factors or induced temperate phages. Conclusions: In sum, we propose a quality-by-design approach for the amplification of broad-spectrum anti-S. aureus phages, facilitating the subsequent steps of the manufacturing process; namely, purification and quality control.

Paving the way for phage therapy using novel drug delivery approaches.

Bacterial resistance against antibiotics is an emergent medical issue. The development of novel therapeutic approaches is urgently needed and, in this context, bacteriophages represent a promising strategy to fight multi resistant bacteria. However, for some applications, bacteriophages cannot be used without an appropriate drug delivery system which increases their stability or provides an adequate targeting to the site of infection. This review summarizes the main application routes for bacteriophages and presents the new delivery approaches designed to increase phage's activity. Clinical successes of these formulations are also highlighted. Globally, this work paves the way for the design and optimization of nano and micro delivery systems for phage therapy.

[Viruses for health: Bacteriophages]. / Les virus au service de la santé : les bactériophages.

Bacteriophages are naturally occurring viruses that specifically target bacteria. They are widely distributed in the environment. The concept of phage therapy is to isolate phages, characterize them, cultivate them and then purify them to treat bacterial infections. There is currently a revival of phage therapy, and its implementation presupposes the availability of active phages of pharmaceutical quality. From a regulatory point of view, the status of phages is not yet clearly defined by the authorities. The availability of phages produced by the pharmaceutical industry and through academic development programs such as the PHAGEinLYON program represents a breakthrough in the development of phage therapy. Prosthetic joint infections and digestive diseases seem to be relevant indications, but preclinical studies and randomized clinical trials are now needed to be done.

Title: Les virus au service de la santé : les bactériophages. Abstract: Les bactériophages sont des virus naturels très répandus dans l'environnement qui ciblent spécifiquement les bactéries. Leur utilisation en médecine, connue sous le terme phagothérapie, consiste à les isoler, les caractériser, les cultiver, puis les purifier pour traiter des infections bactériennes. Il existe actuellement un renouveau pour la thérapie phagique, et sa mise en œuvre présuppose de disposer de phages actifs de qualité pharmaceutique. D'un point de vue réglementaire, le statut des phages n'est pas encore clairement défini par les autorités, mais la mise à disposition de phages produits par l'industrie pharmaceutique et les programmes de développement académiques, comme le programme PHAGEinLYON, constituent un tournant dans le déploiement de la phagothérapie.

Past and Future of Phage Therapy and Phage-Derived Proteins in Patients with Bone and Joint Infection.

Phage-derived therapies comprise phage therapy and the use of phage-derived proteins as anti-bacterial therapy. Bacteriophages are natural viruses that target specific bacteria. They were proposed to be used to treat bacterial infections in the 1920s, before the discovery and widespread over-commercialized use of antibiotics. Phage therapy was totally abandoned in Western countries, whereas it is still used in Poland, Georgia and Russia. We review here the history of phage therapy by focusing on bone and joint infection, and on the development of phage therapy in France in this indication. We discuss the rationale of its use in bacterial infection and show the feasibility of phage therapy in the 2020s, based on several patients with complex bone and joint infection who recently received phages as compassionate therapy. Although the status of phage therapy remains to be clarified by health care authorities, obtaining pharmaceutical-grade therapeutic phages (i.e., following good manufacturing practice guidelines or being "GMP-like") targeting bacterial species of concern is essential. Moreover, multidisciplinary clinical expertise has to determine what could be the relevant indications to perform clinical trials. Finally "phage therapy 2.0" has to integrate the following steps: (i) follow the status of phage therapy, that is not settled and defined; (ii) develop in each country a close relationship with the national health care authority; (iii) develop industrial-academic partnerships; (iv) create academic reference centers; (v) identify relevant clinical indications; (vi) use GMP/GMP-like phages with guaranteed quality bioproduction; (vii) start as salvage therapy; (vii) combine with antibiotics and adequate surgery; and (viii) perform clinical trials, to finally (ix) demonstrate in which clinical settings phage therapy provides benefit. Phage-derived proteins such as peptidoglycan hydrolases, polysaccharide depolymerases or lysins are enzymes that also have anti-biofilm activity. In contrast to phages, their development has to follow the classical process of medicinal products. Phage therapy and phage-derived products also have a huge potential to treat biofilm-associated bacterial diseases, and this is of crucial importance in the worldwide spread of antimicrobial resistance.

Formulation of Pickering emulsions for the development of surfactant-free sunscreen creams.

OBJECTIVE: Pickering emulsions are increasingly used in the pharmaceutical and cosmetic fields, especially for topical applications, since these systems require solid particles as emulsifiers instead of surfactants which are known to cause skin irritation. The solid inorganic nanoparticles (TiO2 and ZnO) used as UV filters in sunscreen formulations may also stabilize emulsion droplets, so that the utility of surfactants may be questioned. Surfactant-free sunscreen emulsions solely stabilized by such nanoparticles (NPs) have been studied. METHODS: The ability of these NPs to stabilize o/w emulsions containing a 'model' oil phase, the C12 -C15 alkylbenzoate, has been assessed. ZnO and hydrophilic silica-coated TiO2 NPs widely used in sunscreen products were used together with their mixtures. The emulsification efficiency, the control of droplet size and the stability of o/w Pickering emulsions solely stabilized by NPs were investigated. A ZnO/TiO2 NPs mixture characterized by a theoretical SPF of 45 was finally used as unique emulsifiers to develop a surfactant-free sunscreen emulsion. RESULTS: Stable Pickering emulsions containing 10 up to 60 wt% of C12 -C15 alkyl benzoate were formulated with 2 wt% ZnO in the aqueous phase. The droplet size was controlled by the solid NPs content with respect to oil and the emulsification process. Hydrophilic TiO2 NPs did not allow the stabilization of emulsions. The substitution of TiO2 for ZnO up to 60-70 wt% in a 20/80 o/w emulsion was successfully performed. Finally, a ZnO/TiO2 NP mixture was tested as unique emulsifier system for the formulation of a sunscreen cream. Despite a lower viscosity, the obtained Pickering emulsion was stable and exhibited a photoprotective effect similar to the corresponding surfactant-based sunscreen cream with an in vitro SPF of about 45. CONCLUSION: Surfactant-free Pickering emulsions can be stabilized by the UV-filter nanoparticles for the manufacture of sunscreen products.

OBJECTIFS: Les émulsions de Pickering sont de plus en plus utilisées dans les domaines pharmaceutique et cosmétique, notamment pour les applications topiques, car ces systèmes utilisent des particules solides comme émulsifiants au lieu de tensioactifs qui sont connus pour provoquer des irritations cutanées. Les nanoparticules inorganiques solides (TiO2 et ZnO) utilisées comme filtres UV dans les formulations d'écran solaire peuvent également stabiliser les gouttelettes d'émulsion, de sorte que l'utilité des tensioactifs peut être remise en question. Des émulsions de protection solaire sans tensioactifs et uniquement stabilisées par de telles nanoparticules (NP) ont été étudiées. MÉTHODES: La capacité de ces NP à stabiliser les émulsions H/E contenant une phase huileuse «modèle¼, le benzoate d'alkyle C12 -C15 , a été évaluée. Des NP de ZnO et de TiO2 couvert de silice hydrophile, que l'on trouve largement dans les produits de protection solaire, ont été utilisées séparément et en mélange. L'efficacité d'émulsification, le contrôle de la taille des gouttelettes et la stabilité des émulsions de Pickering H/E uniquement stabilisées par les NP ont été étudiés. Un mélange de NP ZnO/TiO2 caractérisé par un SPF théorique de 45 a finalement été utilisé comme émulsifiant unique pour développer une émulsion de protection solaire sans tensioactif. RÉSULTATS: Des émulsions de Pickering stables contenant 10 à 60% en poids de benzoate d'alkyle C12 -C15 ont été formulées avec 2% en poids de ZnO dans la phase aqueuse. La taille des gouttelettes était contrôlée par la teneur en NP solides par rapport à l'huile et le procédé d'émulsification. Les NP de TiO2 hydrophile n'ont pas permis la stabilisation des émulsions. La substitution des NP de TiO2 par du ZnO jusqu'à 60-70% en poids dans une émulsion 20/80 H/E a été réalisée avec succès. Enfin, un mélange de NP ZnO/TiO2 a été testé en tant que système émulsifiant unique pour la formulation d'une crème solaire. Malgré une viscosité plus faible, l'émulsion de Pickering obtenue était stable et présentait un effet photoprotecteur similaire à la crème solaire à base de tensioactif correspondante avec un SPF in vitro d'environ 45. CONCLUSION: Les émulsions Pickering sans tensioactifs peuvent être stabilisées par les nanoparticules de filtre UV pour la formulation de produits de protection solaire.

Preoperative Topical Estrogen Treatment vs Placebo in 244 Children With Midshaft and Posterior Hypospadias.

PURPOSE: Urethral fistula and dehiscence are common after hypospadias surgery. Preoperative androgens have been considered to reduce these complications although this consideration is not evidence-based. Dermatologists have reported the benefits of topical estrogens on skin healing. We investigated whether the preoperative use of topical promestriene could reduce healing complications in hypospadias surgery. Our primary objective was to demonstrate a reduction of healing complications with promestriene vs placebo. Impact on reoperations and other complications, clinical tolerance, bone growth, and biological systemic effects of the treatment were also considered. METHODS: We conducted a prospective, randomized, placebo-controlled, double-blind, parallel group trial between 2011 and 2015 in 4 French centers. One-stage transverse preputial island flap urethroplasty (onlay urethroplasty) was selected for severe hypospadias. Promestriene or placebo was applied on the penis for 2 months prior to surgery. The primary outcome was the presence of postoperative urethral fistula or dehiscence in the first year postsurgery. For safety reasons, hormonal and anatomical screenings were performed. RESULTS: Out of 241 patients who received surgery, 122 patients were randomized to receive placebo, and 119 patients received promestriene. The primary outcome was unavailable for 11 patients. Healing complications were assessed at 16.4% (19/116) in the placebo vs 14.9% (17/114) in the promestriene arm, and the odds ratio adjusted on center was 0.93 (95% confidence interval 0.45-1.94), P = 0.86. CONCLUSIONS AND RELEVANCE: Although we observed an overall lower risk of complications compared to previous publications, postsurgery complications were not different between promestriene and placebo, because of a lack of power of the study or the inefficacy of promestriene.

Biological Applications and Toxicity Minimization of Semiconductor Quantum Dots.

The extraordinary potential of semiconductor quantum dots (QDs) has resulted in their widespread application in various fields, from engineering technology and the development of laboratory techniques to biomedical imaging and therapeutic strategies. However, the toxicity of QDs remains a concern and has limited their applications in human health. Better understanding of the behavior of QDs as it relates to their composition will enable the exploration of their limitations and development of a strategy to control their toxicity for potential therapeutic applications. Here, we describe approaches to minimize their toxicities according to the specific cell type, organ, or animal species, summarizing recent promising research at the cellular, organ, and whole-organism level.

Minoxidil versus placebo in the treatment of arterial wall hypertrophy in children with Williams Beuren Syndrome: a randomized controlled trial.

BACKGROUND: Insufficient elastin synthesis leads to vascular complications and arterial hypertension in children with Williams-Beuren syndrome. Restoring sufficient quantity of elastin should then result in prevention or inhibition of vascular malformations and improvement in arterial blood pressure. METHODS: The aim of this study was to assess the efficacy and safety of minoxidil on Intima Media Thickness (IMT) on the right common carotid artery after twelve-month treatment in patient with Williams-Beuren syndrome. We performed a randomized placebo controlled double blind trial. All participants were treated for 12 months and followed for 18 months. The principal outcome was assessed by an independent adjudication committee blinded to the allocated treatment groups. RESULTS: The principal outcome was available for 9 patients in the placebo group and 8 patients in the minoxidil group. After 12-month treatment, the IMT in the minoxidil group increased by 0.03 mm (95% CI -0.002, 0.06) compared with 0.01 mm (95%CI - 0.02, 0.04 mm) in the placebo group (p = 0.4). Two serious adverse events unrelated to the treatment occurred, one in the minoxidil and 1 in the placebo group. After 18 months, the IMT increased by 0.07 mm (95% CI 0.04, 0.10 mm) in the minoxidil compared with 0.01 mm (95% CI -0.02, 0.04 mm) in the placebo group (p = 0.008). CONCLUSION: Our results suggest a slight increase after 12 and 18-month follow-up in IMT. More understanding of the biological changes induced by minoxidil should better explain its potential role on elastogenesis in Williams-Beuren syndrome. TRIALS REGISTRATION: US National Institutes of Health Clinical Trial Register (NCT00876200). Registered 3 April 2009 (retrospectively registered).

Production and stability study of a hospital parenteral nutrition solution for neonates.

Standard parenteral nutrition solutions are mixtures comprising interacting components that may degrade themselves over time. The objective of this study was to investigate the physicochemical and microbiological stability of a hospital preparation for parenteral nutrition in neonatology. The analyses were performed throughout the storage of the preparations at 2-8 °C (up to 4 months). The extent of stability was based on the determination of amino acids dosage, visual and physicochemical properties (glucose and electrolytes concentrations, pH and osmolality measurements, particle counting) and microbiological analysis (sterility test). A thermal degradation of ascorbic acid was conducted to evaluate the antioxidant properties of the parenteral mixture. Physicochemical and microbiological controls were found to comply with the specifications. Amino acids showed a good stability throughout the 4months storage except for cysteine, which was progressively degraded to cystine, conferring a yellow coloration to parenteral solutions. Parenteral nutrition standards solutions remain stable for 4 months at 2-8 °C, ensuring safe administration in preterm infants.

Dual 0.02% chlorhexidine digluconate - 0.1% disodium EDTA loaded thermosensitive ocular gel for Acanthamoeba keratitis treatment.

Poor bioavailability and low residence time limit the efficiency of conventional biguanide-based eye drops against Acanthamoeba keratitis. The aim of this work was to formulate an original anti-amoebic thermoreversible ocular gel combining biguanide and metalloproteases inhibitor - chelating agent. Chlorhexidine digluconate (CHX)-ethylenediaminetetraacetic acid disodium salt (Na2EDTA) were compounded in poloxamer 407 saline solution. 0.02% CHX - 0.1% Na2EDTA loaded thermosensitive ocular gel exhibited appropriate pH (5.73 ±â€¯0.06), iso-osmolality (314 ±â€¯5 mOsm/kg), viscosity (ranged between 15 and 25 mPa.s) and thermal gelation (26.5 °C and 33 °C) properties. Bioadhesion of gel was successfully tested onto isolated bovine eyes as well as the assessment of CHX penetration into the cornea. Intracorneal CHX concentration was found greater than trophozoite minimum amoebicidal concentration and minimal cysticidal concentration after 15-min and 2-h ocular exposure, respectively, while any CHX permeation through the cornea was detected (<51 ng/cm2/h). Improvement of CHX ocular bioavailability was attributed to probable solubilization of tear film lipid layer by poloxamer. In vitro efficiency of CHX-Na2EDTA ocular gel was confirmed from the drastic reduction of trophozoite and cyst survival (to 25% and 2%, respectively), confirming the potential of the multicomponent pharmaceutical material strategy for the treatment of Acanthamoeba keratitis.

Live-stream characterization of cadmium-induced cell death using visible CdTe-QDs.

Characterization of cell death currently requires the use of indirect markers, which has largely limited the ability to monitor cell death processes inside the cell. Here, we introduce a new method for the characterization of cell death mechanisms using cadmium telluride quantum dots (CdTe-QDs). Using visible CdTe-QDs with mesenchymal cells (e.g. synoviocytes), live-stream imaging allowed for visualization of cadmium-induced cell death, combining characteristics of apoptosis and autophagy. Initially, similar anti-proliferative effect was observed between 10 µg/ml Cd2+ and CdTe-QDs at 24 h (cell index/cell density ratio decreased from 0.6 to -16.6, p < 0.05) using techniques that do not require the capacity of CdTe-QDs. Apoptosis was confirmed by the quantification of morphological parameters (reduced surface area, increased cell thickness) and positive labeling with annexin V. Autophagy was confirmed by monodansylcadaverine staining, identifying similar autophagic vacuoles with both Cd2+ and CdTe-QD. However, QD imaging allowed for visualization of cadmium elements inside cell structures and their kinetic changes leading to cell death. Cell death characteristics were similar in inflammatory and non-inflammatory environment but were induced up to 4 h earlier in the former. Therefore, live-stream imaging of a visible cytotoxic agent has useful applications not currently possible with indirect methods, including chronological monitoring of cell death.

Long-term stability of gentamicin sulfate-ethylenediaminetetraacetic acid disodium salt (EDTA-Na2) solution for catheter locks.

A lock solution composed of gentamicin sulfate (5 mg/mL) and ethylenediaminetetraacetic acid disodium salt (EDTA-Na2, 30 mg/mL) could fully eradicate in vivo bacterial biofilms in totally implantable venous access ports (TIVAP). In this study, fabrication, conditioning and sterilization processes of antimicrobial lock solution (ALS) were detailed and completed by a stability study. Stability of ALS was conducted for 12 months in vial (25 °C ± 2 °C, 60% ± 5% relative humidity (RH), and at 40 °C ± 2 °C, RH 75% ± 5%) and for 24 h and 72 h in TIVAP (40 °C ± 2 °C, RH 75% ± 5%). A stability indicating HPLC assay with UV detection for simultaneous quantification of gentamicin sulfate and EDTA-Na2 was developed. ALS was assayed by ion-pairing high performance liquid chromatography (HPLC) needing gentamicin derivatization, EDTA-Na2 metallocomplexation of samples and gradient mobile phase. HPLC methods to separate four gentamicin components and EDTA-Na2 were validated. Efficiency of sterility procedure and conditioning of ALS was confirmed by bacterial endotoxins and sterility tests. Physicochemical stability of ALS was determined by visual inspection, osmolality, pH, and sub-visible particle counting. Results confirmed that the stability of ALS in vials was maintained for 12 months and 24 h and 72 h in TIVAP.

Comparison of four different fuller's earth formulations in skin decontamination.

Industrial accidents, wars and terrorist threats are potential sources of skin contamination by highly toxic chemical warfare agents and manufacturing compounds. We have compared the time-dependent adsorption capacity and decontamination efficiency of fuller's earth (FE) for four different formulations for the molecular tracer, 4-cyanophenol (4-CP), in vitro and ex vivo using water decontamination as standard. The adsorption capacity of FE was assessed in vitro for 4-CP aqueous solutions whereas decontamination efficiency was investigated ex vivo by tracking porcine skin 4-CP content using attenuated total reflectance Fourier transform infrared spectroscopy. Decontamination was performed on short time, exposed porcine skin to 4-CP by application of FE: (1) as free powder; (2) loaded on adhesive tape; (3) on powdered glove; or (4) in suspension. Removal rate of 4-CP from aqueous solutions correlates with the amount of FE and its contact time. Decontamination efficiency estimated by the percentage of 4-CP recovery from contaminated porcine skin, achieved 54% with water, ranged between ~60 and 70% with dry FE and reached ~90% with FE suspension. Successful decontamination of the FE suspension, enabling a dramatic reduction of skin contamination after a brief exposure scenario, appears to be rapid, reliable and should be formulated in a new device ready to use for self-application.

Formulation, stability testing, and analytical characterization of melatonin-based preparation for clinical trial.

A new institutional clinical trial assessed the improvement of sleep disorders in 40 children with autism treated by immediate-release melatonin formulation in different regimens (0.5 mg, 2 mg, and 6 mg daily) for one month. The objectives of present study were to (i) prepare low-dose melatonin hard capsules for pediatric use controlled by two complementary methods and (ii) carry out a stability study in order to determine a use-by-date. Validation of preparation process was claimed as ascertained by mass uniformity of hard capsules. Multicomponent analysis by attenuated total reflectance Fourier transformed infrared (ATR-FTIR) of melatonin/microcrystalline cellulose mixture allowed to identify and quantify relative content of active pharmaceutical ingredients and excipients. Absolute melatonin content analysis by high performance liquid chromatography in 0.5 mg and 6 mg melatonin capsules was 93.6%±4.1% and 98.7%±6.9% of theoretical value, respectively. Forced degradation study showed a good separation of melatonin and its degradation products. The capability of the method was 15, confirming a risk of false negative <0.01%. Stability test and dissolution test were compliant over 18 months of storage with European Pharmacopoeia. Preparation of melatonin hard capsules was completed manually and melatonin in hard capsules was stable for 18 months, in spite of low doses of active ingredient. ATR-FTIR offers a real alternative to HPLC for quality control of high-dose melatonin hard capsules before the release of clinical batches.