Hydrophilic Copolymers with Hydroxamic Acid Groups as a Protective Biocompatible Coating of Maghemite Nanoparticles: Synthesis, Physico-Chemical Characterization and MRI Biodistribution Study.

Superparamagnetic iron oxide nanoparticles (SPION) with a "non-fouling" surface represent a versatile group of biocompatible nanomaterials valuable for medical diagnostics, including oncology. In our study we present a synthesis of novel maghemite (γ-Fe2O3) nanoparticles with positive and negative overall surface charge and their coating by copolymer P(HPMA-co-HAO) prepared by RAFT (reversible addition-fragmentation chain-transfer) copolymerization of N-(2-hydroxypropyl)methacrylamide (HPMA) with N-[2-(hydroxyamino)-2-oxo-ethyl]-2-methyl-prop-2-enamide (HAO). Coating was realized via hydroxamic acid groups of the HAO comonomer units with a strong affinity to maghemite. Dynamic light scattering (DLS) demonstrated high colloidal stability of the coated particles in a wide pH range, high ionic strength, and the presence of phosphate buffer (PBS) and serum albumin (BSE). Transmission electron microscopy (TEM) images show a narrow size distribution and spheroid shape. Alternative coatings were prepared by copolymerization of HPMA with methyl 2-(2-methylprop-2-enoylamino)acetate (MMA) and further post-polymerization modification with hydroxamic acid groups, carboxylic acid and primary-amino functionalities. Nevertheless, their colloidal stability was worse in comparison with P(HPMA-co-HAO). Additionally, P(HPMA-co-HAO)-coated nanoparticles were subjected to a bio-distribution study in mice. They were cleared from the blood stream by the liver relatively slowly, and their half-life in the liver depended on their charge; nevertheless, both cationic and anionic particles revealed a much shorter metabolic clearance rate than that of commercially available ferucarbotran.

RGDS-Modified Superporous Poly(2-Hydroxyethyl Methacrylate)-Based Scaffolds as 3D In Vitro Leukemia Model.

Superporous poly(2-hydroxyethyl methacrylate-co-2-aminoethyl methacrylate) (P(HEMA-AEMA)) hydrogel scaffolds are designed for in vitro 3D culturing of leukemic B cells. Hydrogel porosity, which influences cell functions and growth, is introduced by adding ammonium oxalate needle-like crystals in the polymerization mixture. To improve cell vitality, cell-adhesive Arg-Gly-Asp-Ser (RGDS) peptide is immobilized on the N-(γ-maleimidobutyryloxy)succinimide-activated P(HEMA-AEMA) hydrogels via reaction of SH with maleimide groups. This modification is especially suitable for the survival of primary chronic lymphocytic leukemia cells (B-CLLs) in 3D cell culture. No other tested stimuli (interleukin-4, CD40 ligand, or shaking) can further improve B-CLL survival or metabolic activity. Both unmodified and RGDS-modified P(HEMA-AEMA) scaffolds serve as a long-term (70 days) 3D culture platforms for HS-5 and M2-10B4 bone marrow stromal cell lines and MEC-1 and HG-3 B-CLL cell lines, although the adherent cells retain their physiological morphologies, preferably on RGDS-modified hydrogels. Moreover, the porosity of hydrogels allows direct cell lysis, followed by efficient DNA isolation from the 3D-cultured cells. P(HEMA-AEMA)-RGDS thus serves as a suitable 3D in vitro leukemia model that enables molecular and metabolic assays and allows imaging of cell morphology, interactions, and migration by confocal microscopy. Such applications can prospectively assist in testing of drugs to treat this frequently recurring or refractory cancer.

Poly[N-(2-hydroxypropyl)methacrylamide]-Modified Magnetic γ-F2 O3 Nanoparticles Conjugated with Doxorubicin for Glioblastoma Treatment.

With the aim to develop a new anticancer agent, we prepared poly[N-(2-hydroxypropyl)methacrylamide-co-methyl 2-methacrylamidoacetate] [P(HP-MMAA)], which was reacted with hydrazine to poly[N-(2-hydroxypropyl)methacrylamide-co-N-(2-hydrazinyl-2-oxoethyl)methacrylamide] [P(HP-MAH)] to conjugate doxorubicin (Dox) via hydrazone bond. The resulting P(HP-MAH)-Dox conjugate was used as a coating of magnetic γ-Fe2 O3 nanoparticles obtained by the coprecipitation method. In vitro toxicity of various concentrations of Dox, P(HP-MAH)-Dox, and γ-Fe2 O3 @P(HP-MAH)-Dox nanoparticles was determined on somatic healthy cells (human bone marrow stromal cells hMSC), human glioblastoma line (GaMG), and primary human glioblastoma (GBM) cells isolated from GBM patients both at a short and prolonged exposition time (up to 7 days). Due to hydrolysis of the hydrazone bond in acid milieu of tumor cells and Dox release, the γ-Fe2 O3 @P(HP-MAH)-Dox nanoparticles significantly decreased the GaMG and GBM cell growth compared to free Dox and P(HP-MAH)-Dox in low concentration (10 nM), whereas in hMSCs it remained without effect. γ-F2 O3 @PHP nanoparticles alone did not affect the viability of any of the tested cells.

Cytotoxicity of doxorubicin-conjugated poly[N-(2-hydroxypropyl)methacrylamide]-modified γ-Fe2O3 nanoparticles towards human tumor cells.

Doxorubicin-conjugated magnetic nanoparticles containing hydrolyzable hydrazone bonds were developed using a non-toxic poly[N-(2-hydroxypropyl)methacrylamide] (PHPMA) coating, which ensured good colloidal stability in aqueous media and limited internalization by the cells, however, enabled adhesion to the cell surface. While the neat PHPMA-coated particles proved to be non-toxic, doxorubicin-conjugated particles exhibited enhanced cytotoxicity in both drug-sensitive and drug-resistant tumor cells compared to free doxorubicin. The newly developed doxorubicin-conjugated PHPMA-coated magnetic particles seem to be a promising magnetically targeted vehicle for anticancer drug delivery.

Reductively Degradable Poly(2-hydroxyethyl methacrylate) Hydrogels with Oriented Porosity for Tissue Engineering Applications.

Degradable poly(2-hydroxyethyl methacrylate) hydrogels were prepared from a linear copolymer (Mw = 49 kDa) of 2-hydroxyethyl methacrylate (HEMA), 2-(acethylthio)ethyl methacrylate (ATEMA), and zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC). The deprotection of ATEMA thiol groups by triethylamine followed by their gentle oxidation with 2,2'-dithiodipyridine resulted in the formation of reductively degradable polymers with disulfide bridges. Finally, a hydrogel 3D structure with an oriented porosity was obtained by gelation of the polymer in the presence of needle-like sodium acetate crystals. The pore diameter and porosity of resulting poly(2-hydroxyethyl methacrylate-co-2-(acethylthio)ethyl methacrylate-co-2-methacryloyloxyethyl phosphorylcholine) [P(HEMA-ATEMA-MPC)] hydrogels varied between 59 and 65 µm and between 70 and 79.6 vol % according to Hg porosimetry, and complete degradation of these materials was reached in 86 days in 0.33 mmol solution of l-cysteine/L in phosphate buffer. The cross-linked P(HEMA-ATEMA-MPC) hydrogels were evaluated as a possible support for human mesenchymal stem cells (MSCs). No cytotoxicity was found for the un-cross-linked thiol-containing and protected P(HEMA-ATEMA-MPC) chains up to a concentration of 5 and 1 wt % in α-minimum essential medium, respectively.

RGDS- and SIKVAVS-Modified Superporous Poly(2-hydroxyethyl methacrylate) Scaffolds for Tissue Engineering Applications.

Three-dimensional hydrogel supports for mesenchymal and neural stem cells (NSCs) are promising materials for tissue engineering applications such as spinal cord repair. This study involves the preparation and characterization of superporous scaffolds based on a copolymer of 2-hydroxyethyl and 2-aminoethyl methacrylate (HEMA and AEMA) crosslinked with ethylene dimethacrylate. Ammonium oxalate is chosen as a suitable porogen because it consists of needle-like crystals, allowing their parallel arrangement in the polymerization mold. The amino group of AEMA is used to immobilize RGDS and SIKVAVS peptide sequences with an N-γ-maleimidobutyryloxy succinimide ester linker. The amount of the peptide on the scaffold is determined using 125 I radiolabeled SIKVAVS. Both RGDS- and SIKVAVS-modified poly(2-hydroxyethyl methacrylate) scaffolds serve as supports for culturing human mesenchymal stem cells (MSCs) and human fetal NSCs. The RGDS sequence is found to be better for MSC and NSC proliferation and growth than SIKVAVS.

Streptavidin-modified monodispersed magnetic poly(2-hydroxyethyl methacrylate) microspheres as solid support in DNA-based molecular protocols.

Molecular diagnostics may provide tailored and cost efficient treatment for infectious disease and cancer. Rolling circle amplification (RCA) of padlock probes guarantees high specificity to identify nucleic acid targets down to single nucleotide resolution in a multiplex fashion. This makes the assay suitable for molecular analysis of various diseases, and interesting to integrate into automated devices for point-of-care analysis. A critical prerequisite for many molecular assays is (i) target-specific isolation from complex clinical samples and (ii) removal of reagents, inhibitors and contaminants between reaction steps. Efficient solid supports are therefore essential to enable multi-step, multi-analyte protocols. Superparamagnetic micro- and nanoparticles, with large surface area and rapid liquid-phase kinetics, are attractive for multi-step protocols. Recently, streptavidin-modified magnetic monodispersed poly(2-hydroxyethyl methacrylate) (STV-mag.PHEMA) microspheres were developed by multiple swelling polymerization. They are easily separated by a magnet and exhibit low non-specific protein sorption. In this study, the performance and the binding efficiency of STV-mag.PHEMA was addressed by circle-to-circle amplification (C2CA). A lower number of RCA products were detected as compared to the gold standard Dynabeads. Nevertheless, this study was the first to successfully adapt STV-mag.PHEMA microspheres as solid support in a DNA-based protocol, which is an important finding. The STV-mag.PHEMA microspheres were larger with about 16 times less surface area as compared to the Dynabeads, which might partly explain the lower rolling circle product (RCP) count obtained. Further research is currently ongoing comparing particles of similar sizes and optimizing reaction conditions to establish their full utility in the field. Ultimately, low cost and versatile particles are a great resource to facilitate future clinical molecular diagnostics.

Alzheimer's disease biomarkers detection in human samples by efficient capturing through porous magnetic microspheres and labelling with electrocatalytic gold nanoparticles.

A nanobiosensor based on the use of porous magnetic microspheres (PMM) as efficient capturing/pre-concentrating platform is presented for detection of Alzheimer's disease (AD) biomarkers. These PMMs prepared by a multistep swelling polymerization combined with iron oxide precipitation afford carboxyl functional groups suitable for immobilization of antibodies on the particle surface allowing an enhanced efficiency in the capturing of AD biomarkers from human serum samples. The AD biomarkers signaling is produced by gold nanoparticle (AuNP) tags monitored through their electrocatalytic effect towards hydrogen evolution reaction (HER). Novel properties of PMMs in terms of high functionality and high active area available for enhanced catalytic activity of the captured AuNPs electrocatalytic tags are exploited for the first time. A thorough characterization by scanning transmission electron microscope in high angle annular dark field mode (STEM-HAADF) demonstrates the enhanced ability of PMMs to capture a higher quantity of analyte and consequently of electrocatalytic label, when compared with commercially available microspheres. The optimized and characterized PMMs are also applied for the first time for the detection of beta amyloid and ApoE at clinical relevant levels in cerebrospinal fluid (CSF), serum and plasma samples of patients suffering from AD.

SIKVAV-modified highly superporous PHEMA scaffolds with oriented pores for spinal cord injury repair.

The architecture and mechanical properties of a scaffold for spinal cord injury treatment must provide tissue integration as well as effective axonal regeneration. Previous work has demonstrated the cell-adhesive and growth-promoting properties of the SIKVAV (Ser-Ile-Lys-Val-Ala-Val)-modified highly superporous poly(2-hydroxethyl methacrylate) (PHEMA) hydrogels. The aim of the current study was to optimize the porosity and mechanical properties of this type of hydrogel in order to develop a suitable scaffold for the repair of spinal cord tissue. Three types of highly superporous PHEMA hydrogels with oriented pores of ~60 µm diameter, porosities of 57-68% and equivalent stiffness characterized by elasticity moduli in the range 3-45 kPa were implanted into a spinal cord hemisection, and their integration into the host tissue, as well as the extent of axonal ingrowth into the scaffold pores, were histologically evaluated. The best tissue response was found with a SIKVAV-modified PHEMA hydrogel with 68% porosity and a moderate modulus of elasticity (27 kPa in the direction along the pores and 3.6 kPa in the perpendicular direction). When implanted into a spinal cord transection, the hydrogel promoted tissue bridging as well as aligned axonal ingrowth. In conclusion, a prospective oriented scaffold architecture of SIKVAV-modified PHEMA hydrogels has been developed for spinal cord injury repair; however, to develop an effective treatment for spinal cord injury, multiple therapeutic approaches are needed.

Use of specific polysaccharide-immobilized monodisperse poly(glycidyl methacrylate) core-silica shell microspheres for affinity purification of lectins.

Immobilization of polysaccharides (yeast mannan and gum arabic) on the macroporous poly(glycidyl methacrylate) monodisperse microspheres coated with silica (SiO2 )-containing amino groups on the surface was used to prepare affinity sorbents for lectin purification. The efficiency of isolating mannose specific Pisum sativum lectin was demonstrated on sorbent with immobilized yeast mannan and that of galactose specific Glycine hispida lectin on sorbent with immobilized gum arabic. The microspheres with immobilized polysaccharides can be used for selecting an affinity sorbent for purification of other mannose- and galactose-specific lectins. In contrast to yeast mannan, the gum arabic immobilized on the microspheres possesses much narrower specificity and is suitable for purification of only those galactose specific lectins which interact well with l-rhamnose or l-arabinose. The synthesized macroporous particles are capable of immobilizing 50 mg of polysaccharide per 1 g of the matrix, which is 10 times higher than the capacity of epoxy-activated Sepharose 6B. That makes it possible to obtain the same lectin quantity using a column of 10 times smaller volume. Another advantage of novel affinity sorbents comparing corresponding Sepharose gels is the possibility of sorbent drying after use.

Magnetic poly(glycidyl methacrylate) microspheres for protein capture.

The efficient isolation and concentration of protein antigens from complex biological samples is a critical step in several analytical methods, such as mass spectrometry, flow cytometry and immunochemistry. These techniques take advantage of magnetic microspheres as immunosorbents. The focus of this study was on the development of new superparamagnetic polymer microspheres for the specific isolation of the tumor suppressor protein p53. Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres measuring approximately 5 µm and containing carboxyl groups were prepared by multistep swelling polymerization of glycidyl methacrylate (GMA), 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) and ethylene dimethylacrylate (EDMA) as a crosslinker in the presence of cyclohexyl acetate as a porogen. To render the microspheres magnetic, iron oxide was precipitated within their pores; the Fe content in the particles received ∼18 wt%. Nonspecific interactions between the magnetic particles and biological media were minimized by coating the microspheres with poly(ethylene glycol) (PEG) terminated by carboxyl groups. The carboxyl groups of the magnetic PGMA microspheres were conjugated with primary amino groups of mouse monoclonal DO-1 antibody using conventional carbodiimide chemistry. The efficiency of protein p53 capture and the degree of nonspecific adsorption on neat and PEG-coated magnetic microspheres were determined by western blot analysis.

Poly(glycidyl methacrylate)/silver nanocomposite microspheres as a radioiodine scavenger: electrophoretic characterisation of carboxyl- and amine-modified particles.

Silver nanoparticles possess potent antibacterial properties and have extremely high affinities to radioiodine. For several applications, it is essential to anchor the nanoparticles to microparticles or solid surfaces to make them insoluble while retaining their unique properties. This current work is related to the design of anionic and cationic macroporous polymer microspheres based on poly(glycidyl methacrylate) (PGMA) obtained using a multistep swelling polymerisation. According to scanning electron microscopy, the microspheres were monodisperse in size and 4.2 µm in diameter. The presence of the carboxyl and amino groups in the PGMA-COOH and PGMA-NH2 microspheres was confirmed by FT-IR spectroscopy. Capillary electrophoresis (CE) and pressure-assisted capillary electrophoresis (PACE) were used to study the electrophoretic behaviour of both types of microparticles. The electrophoretic mobility of the microparticles was changed into ζ potential using Smoluchowski modelling. Finally, silver-containing microspheres were prepared by reducing silver nitrate in the presence of the microspheres, and they proved effective for scavenging radioiodide ions from a model medium.

The use of new surface-modified poly(2-hydroxyethyl methacrylate) hydrogels in tissue engineering: treatment of the surface with fibronectin subunits versus Ac-CGGASIKVAVS-OH, cysteine, and 2-mercaptoethanol modification.

Superporous poly(2-hydroxyethyl methacrylate) is successfully used as a scaffold material for tissue engineering; however, it lacks functional groups that support cell adhesion. The objective of this study was to investigate the cell-adhesive properties of biomimetic ligands, such as laminin-derived Ac-CGGASIKVAVS-OH (SIKVAV) peptide and fibronectin subunits (Fn), as well as small molecules exemplified by 2-mercaptoethanol (ME) and cysteine (Cys), immobilized on a copolymer of 2-hydroxyethyl methacrylate (HEMA) with 2-aminoethyl methacrylate (AEMA) by a maleimide-thiol coupling reaction. The maleimide group was introduced to the P(HEMA-AEMA) hydrogels by the reaction of their amino groups with N-γ-maleimidobutyryl-oxysuccinimide ester (GMBS). Mesenchymal stem cells (MSCs) were used to investigate the cell adhesive properties of the modified hydrogels. A significantly larger area of cell growth as well as a higher cell density were found on Fn- and SIKVAV-modified hydrogels when compared to the ME- and Cys-modified supports or neat P(HEMA-AEMA). Moreover, Fn-modification strongly stimulated cell proliferation. The ability of MSCs to differentiate into adipocytes and osteoblasts was maintained on both Fn- and SIKVAV-modifications, but it was reduced on ME-modified hydrogels and neat P(HEMA-AEMA). The results show that the immobilization of SIKVAV and Fn-subunits onto superporous P(HEMA-AEMA) hydrogels via a GMBS coupling reaction improves cell adhesive properties. The high proliferative activity observed on Fn-modified hydrogels suggests that the immobilized Fn-subunits maintain their bioactivity and thus represent a promising tool for application in tissue engineering.

Immunocapture of CD133-positive cells from human cancer cell lines by using monodisperse magnetic poly(glycidyl methacrylate) microspheres containing amino groups.

Magnetic poly(glycidyl methacrylate)-based macroporous microspheres with an average particle size of 4.2µm were prepared using a modified multi-step swelling polymerization method and by introducing amino functionality on their surfaces. Antibody molecules were oxidized on their carbohydrate moieties and bound to the amino-containing magnetic microspheres via a site-directed procedure. CD133-positive cells could be effectively captured from human cancer cell lines (HepG2, HCT116, MCF7, and IMR-32) by using magnetic microspheres conjugated to an anti-human CD133 antibody. After further culture, the immunocaptured CD133-expressing cells from IMR-32 proliferated and gradually detached from the magnetic microspheres. Flow-cytometric analysis confirmed the enrichment of CD133-expressing cells by using the antibody-bound magnetic microspheres. Such microspheres suitable for immunocapture are very promising for cancer diagnosis because the CD133-expressing cells in cancer cell lines have been suggested to be cancer stem cells.

Fabrication and characterization of tosyl-activated magnetic and nonmagnetic monodisperse microspheres for use in microfluic-based ferritin immunoassay.

This article describes the preparation of tosyl-activated nonmagnetic poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) [P(HEMA-GMA)] microspheres by dispersion polymerization and tosyl-activated magnetic poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) [P(HEMA-EDMA)] microspheres by multistep swelling polymerization method and precipitation of iron oxide inside the pores. These new approaches show that monodisperse microspheres, 2.3 µm, respectively 4.1 µm, in diameter can be produced in high yields avoiding aggregation and with the advantage of being free of aromatic moieties. To demonstrate their potential for diagnostic applications, both types of microparticles have been coated with capture and detection antibodies (DAs), respectively. Immunoassay protocols have then been developed for the dosage of ferritin using an automated affinity platform combining microchannel chips and electrochemical detection. The assay performance using the above magnetic microspheres has been compared with that obtained with commercial tosyl-activated beads. Finally, the possibility to combine functionalized magnetic and nonmagnetic microspheres has been evaluated in view of amplifying the number of enzymatic labels in the immuno-complex. At a ferritin concentration of 119.6 ng/mL, a signal-to-noise ratio of 150.5 is obtained using 0.2 mg/mL of anti-ferritin-coated P(HEMA-GMA)-DA microspheres against a value of 158.8 using free DA in solution.

Albumin-coated monodisperse magnetic poly(glycidyl methacrylate) microspheres with immobilized antibodies: application to the capture of epithelial cancer cells.

Monodisperse (4 µm) macroporous crosslinked poly(glycidyl methacrylate) (PGMA) microspheres for use in microfluidic immunomagnetic cell sorting, with a specific application to the capture of circulating tumor cells (CTCs), were prepared by multistep swelling polymerization in the presence of cyclohexyl acetate porogen and hydrolyzed and ammonolyzed. Iron oxide was then precipitated in the microspheres to render them magnetic. Repeated precipitation made possible to raise the iron oxide content to more than 30 wt %. To minimize nonspecific adsorption of the microspheres in a microchannel and of cells on the microspheres, they were coated with albumin crosslinked with glutaraldehyde. Antibodies of epithelial cell adhesion molecule (anti-EpCAM) were then immobilized on the albumin-coated magnetic microspheres using the carbodiimide method. Capture of breast cancer MCF7 cells as a model of CTCs by the microspheres with immobilized anti-EpCAM IgG was performed in a batch experiment. Finally, MCF7 cells were captured by the anti-EpCAM-immobilized albumin-coated magnetic microspheres in an Ephesia chip. A very good rejection of lymphocytes was achieved. Thus, albumin-coated monodisperse magnetic PGMA microspheres with immobilized anti-EpCAM seem to be promising for capture of CTCs in a microfluidic device.

Use of magnetic hydrazide-modified polymer microspheres for enrichment of Francisella tularensis glycoproteins.

The field of microbial proteomics has currently experienced a boom in the discovery of glycosylated proteins of various pathogenic bacteria as potential mediators of host-pathogen interactions. The presence of glycoproteins has recently been discovered in a Gram-negative pathogenic bacterium Francisella tularensis, utilizing glycoprotein detection and isolation techniques in combination with mass spectrometry. The isolation of glycoproteins is a prerequisite for their subsequent mass-spectrometric identification. Current glycoprotein isolation/enrichment methods comprise lectin affinity chromatography, aminophenylboronic acid and hydrazide-based enrichment. The use of magnetic microspheres containing functional groups is nowadays among state-of-art separation methodologies owing to an ease of manipulation, a speed of separation, and a minimum of non-specific protein adsorption. In the present study, novel magnetic hydrazide-modified poly(2-hydroxyethyl methacrylate) (PHEMA) microspheres were developed using a multi-step swelling and polymerization method with subsequent precipitation of magnetic iron oxides within the pores of the particles. The microspheres had a regular shape, size of 4 µm and contained 0.18 mmol hydrazide groups per g; the magnetic microspheres were employed for specific enrichment of Francisella tularensis glycoproteins. Effectiveness of the newly prepared magnetic microspheres for glycoprotein enrichment was proved by comparison with commercial hydrazide-functionalized microparticles.

Highly superporous cholesterol-modified poly(2-hydroxyethyl methacrylate) scaffolds for spinal cord injury repair.

Modifications of poly(2-hydroxyethyl methacrylate) (PHEMA) with cholesterol and the introduction of large pores have been developed to create highly superporous hydrogels that promote cell-surface interactions and that can serve as a permissive scaffold for spinal cord injury (SCI) treatment. Highly superporous cholesterol-modified PHEMA scaffolds have been prepared by the bulk radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), cholesterol methacrylate (CHLMA), and ethylene dimethacrylate (EDMA) cross-linking agent in the presence of ammonium oxalate crystals to establish interconnected pores in the scaffold. Moreover, 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) was incorporated in the polymerization recipe and hydrolyzed, thus introducing carboxyl groups in the hydrogel to control its swelling and softness. The hydrogels supported the in vitro adhesion and proliferation of rat mesenchymal stem cells. In an in vivo study of acute rat SCI, hydrogels were implanted to bridge a hemisection cavity. Histological evaluation was done 4 weeks after implantation and revealed the good incorporation of the implanted hydrogels into the surrounding tissue, the progressive infiltration of connective tissue and the ingrowth of neurofilaments, Schwann cells, and blood vessels into the hydrogel pores. The results show that highly superporous cholesterol-modified PHEMA hydrogels have bioadhesive properties and are able to bridge a spinal cord lesion.