Preliminary exploration of direct mercury speciation in solid samples by using thermal release coupled to electrothermal atomic absorption spectrometry.

It is known that monitoring of mercury and notably its species is very important to assess their impact and distribution in the environment. In this regard, the development of a methodology for mercury speciation in natural and man-made media is of particular importance. There are a variety of studies in this area associated with the application of thermal release in combination with electrothermal atomic absorption detection for direct mercury speciation in solid samples without preliminary extraction of analytes. Nevertheless, a number of issues remain that hinder its practical application as a reliable analytical method. However, in order to achieve progress in this field, it is necessary to understand the features of the evaporation process itself. The goal of this work is to study the thermal behavior of the most common mercury species in order to eliminate the gaps in this approach. At this stage, studies were carried out using pure substances and their mixtures as a starting point for a subsequent transition to real natural samples. For this the installation scheme was modernized by introducing a module that provides programmable heating of the sample and variation of the heating rate. As a result of the experiments it was shown that the transformation of studied compounds with the examples of mercury chloride, methylmercury chloride, mercury sulfide and mercury sulfate occurs under thermal exposure, which leads to a change in their physicochemical characteristics, but, nevertheless, does not prevent their baseline separation for 30 min using programmable heating mode, which includes a continuous increase in temperature with a subsequent stop until the thermal peak is formed.

Efficient Production of Segmented Carbon Nanofibers via Catalytic Decomposition of Trichloroethylene over Ni-W Catalyst.

The catalytic utilization of chlorine-organic wastes remains of extreme importance from an ecological point of view. Depending on the molecular structure of the chlorine-substituted hydrocarbon (presence of unsaturated bonds, intermolecular chlorine-to-hydrogen ratio), the features of its catalytic decomposition can be significantly different. Often, 1,2-dichloroethane is used as a model substrate. In the present work, the catalytic decomposition of trichloroethylene (C2HCl3) over microdispersed 100Ni and 96Ni-4W with the formation of carbon nanofibers (CNF) was studied. Catalysts were obtained by a co-precipitation of complex salts followed by reductive thermolysis. The disintegration of the initial bulk alloy driven by its interaction with the reaction mixture C2HCl3/H2/Ar entails the formation of submicron active particles. It has been established that the optimal activity of the pristine Ni catalyst and the 96Ni-4W alloy is provided in temperature ranges of 500-650 °C and 475-725 °C, respectively. The maximum yield of CNF for 2 h of reaction was 63 g/gcat for 100Ni and 112 g/gcat for 96Ni-4W catalyst. Longevity tests showed that nickel undergoes fast deactivation (after 3 h), whereas the 96Ni-4W catalyst remains active for 7 h of interaction. The effects of the catalyst's composition and the reaction temperature upon the structural and morphological characteristics of synthesized carbon nanofibers were investigated by X-ray diffraction analysis, Raman spectroscopy, and electron microscopies. The initial stages of the carbon erosion process were precisely examined by transmission electron microscopy coupled with elemental mapping. The segmented structure of CNF was found to be prevailing in a range of 500-650 °C. The textural parameters of carbon product (SBET and Vpore) were shown to reach maximum values (374 m2/g and 0.71 cm3/g, respectively) at the reaction temperature of 550 °C.

Adsorption kinetics of NO2 gas on oxyfluorinated graphene film.

We report the fabrication of high-performance NO2 gas sensors based on oxyfluorinated graphene (OFG) layers. At room temperature, the times of adsorption/desorption of NO2 on/from the surface of thin OFG films are less than 1200 s and can be reduced by increasing the operation temperature. The sensors are capable of detecting NO2 molecules at sub-ppm level with a sensitivity of 0.15 ppm-1 at 348 K. The temperature dependence of the rate constants shows that the simultaneous presence of a large number of fluorine- and oxygen-containing groups on the graphene surface provides the formation of low-energy sites (ΔHa < 0.1 eV) for NO2 adsorption. The combination of the high sensitivity of the sensor and a reasonable adsorption/desorption time of the analyte is promising for on-line monitoring.

Porous Co-Pt Nanoalloys for Production of Carbon Nanofibers and Composites.

The controllable synthesis of carbon nanofibers (CNF) and composites based on CNF (Metals/CNF) is of particular interest. In the present work, the samples of CNF were produced via ethylene decomposition over Co-Pt (0-100 at.% Pt) microdispersed alloys prepared by a reductive thermolysis of multicomponent precursors. XRD analysis showed that the crystal structure of alloys in the composition range of 5-35 at.% Pt corresponds to a fcc lattice based on cobalt (Fm-3m), while the CoPt (50 at.% Pt) and CoPt3 (75 at.% Pt) samples are intermetallics with the structure P4/mmm and Pm-3m, respectively. The microstructure of the alloys is represented by agglomerates of polycrystalline particles (50-150 nm) interconnected by the filaments. The impact of Pt content in the Co1-xPtx samples on their activity in CNF production was revealed. The interaction of alloys with ethylene is accompanied by the generation of active particles on which the growth of nanofibers occurs. Plane Co showed low productivity (~5.5 g/gcat), while Pt itself exhibited no activity at all. The addition of 15-25 at.% Pt to cobalt catalyst leads to an increase in activity by 3-5 times. The maximum yield of CNF reached 40 g/gcat for Co0.75Pt0.25 sample. The local composition of the active alloyed particles and the structural features of CNF were explored.

Doping of Carbon Nanotubes with Encapsulated Phosphorus Chains.

Single-walled carbon nanotubes (SWCNTs) are a perfect host for the formation of one-dimensional phosphorus structures and to obtain hybrid materials with a large P-C ratio. This work presents a procedure for high-yield phosphorus filling of commercial Tuball SWCNTs and efficient removal of phosphorus deposits from the external nanotube surface. We probed white and red phosphorus as precursors, varied the synthesis temperature and the ampoule shape, and tested three solvents for sample purification. High-resolution transmission electron microscopy and Raman spectroscopy indicated crystallization of interior phosphorus in a form resembling fibrous red phosphorus. An aqueous sodium hydroxide solution allowed removing the majority of external phosphorus particles. Thermogravimetric analysis of the product determined ∼23 wt % (∼10 atom %) of phosphorus, and the X-ray photoelectron spectroscopy (XPS) data showed that ca. 80% of it is in the form of elemental phosphorus. Externally purified SWCNTs filled with phosphorus were used to study the interaction between the components. Raman spectroscopy and core-level XPS revealed p-type SWCNT doping. Valence-band XPS data and density functional theory calculations confirmed the transfer of the SWCNT electron density to the encapsulated phosphorus.

Single-Walled Carbon Nanotubes with Red Phosphorus in Lithium-Ion Batteries: Effect of Surface and Encapsulated Phosphorus.

Single-walled carbon nanotubes (SWCNTs) with their high surface area, electrical conductivity, mechanical strength and elasticity are an ideal component for the development of composite electrode materials for batteries. Red phosphorus has a very high theoretical capacity with respect to lithium, but has poor conductivity and expends considerably as a result of the reaction with lithium ions. In this work, we compare the electrochemical performance of commercial SWCNTs with red phosphorus deposited on the outer surface of nanotubes and/or encapsulated in internal channels of nanotubes in lithium-ion batteries. External phosphorus, condensed from vapors, is easily oxidized upon contact with the environment and only the un-oxidized phosphorus cores participate in electrochemical reactions. The support of the SWCNT network ensures a stable long-term cycling for these phosphorus particles. The tubular space inside the SWCNTs stimulate the formation of chain phosphorus structures. The chains reversibly interact with lithium ions and provide a specific capacity of 1545 mAh·g-1 (calculated on the mass of phosphorus in the sample) at a current density of 0.1 A·g-1. As compared to the sample containing external phosphorus, SWCNTs with encapsulated phosphorus demonstrate higher reaction rates and a slight loss of initial capacity (~7%) on the 1000th cycle at 5 A·g-1.

One-Dimensional Diiodine-Iodobismuthate(III) Hybrids Cat3{[Bi2I9](I2)3}: Syntheses, Stability, and Optical Properties.

One-dimensional iodine-rich iodobismuthates(III), Cat3{[Bi2I9](I2)3} [Cat = 1,4-MePy (1) and 1-EtBMAP (2)], feature the highest amount of "trapped" diiodine units in polyhalogen-halometalates of p-block elements. Both complexes have narrow optical band gaps (1.55 and 1.63 eV, respectively) and moderate thermal stability.

Preparation of porous Co-Pt alloys for catalytic synthesis of carbon nanofibers.

A simple and convenient procedure for the production of highly dispersed porous Co-Pt alloys to be used as catalysts for the synthesis of nanostructured carbon fibers (CNF) has been developed. The technique is based on the thermal decomposition of specially synthesized multicomponent precursors in a reducing atmosphere. A series of porous single-phase alloys Co-Pt (10-75 at% Pt) have been synthesized. The alloys containing 75 and 50 at% Pt were identified by the x-ray diffraction analysis as the intermetallics CoPt3 and CoPt, respectively. Within the region of 10-35 at% Pt, the synthesized alloys are represented by Co1-x Pt x random solid solutions with face-centered cubic lattice. The alloys obtained are characterized by a porous structure consisting of assembled fragments with a size of 50-150 nm. The obtained alloys were tested in the catalytic chemical vapor deposition of the ethylene to CNF. A significant synergistic effect between Co and Pt in the synthesis of carbon nanomaterials (CNMs) was revealed. The yield of CNF (for 30 min reaction) for catalysts containing 25-35 at% Pt was 30-38 g(CNF)/g(cat), whereas those for Co (100%) and Pt (100%) samples were as low as 5.6 and >0.1 g(CNF)/g(cat), respectively. The produced CNM composed of fibers with a segmented structure was shown to be characterized by a rather high specific surface area (200-250 m2 g-1) and structural homogeneity.

Insight into the thermal decomposition of ammonium hexahalogenoiridates(IV) and hexachloroiridate(III).

Thermal decomposition of (NH4)3[IrCl6]·H2O, (NH4)2[IrCl6] and (NH4)2[IrBr6] in reductive and inert atmospheres has been investigated in situ using quick-EXAFS and temperature-resolved powder X-ray diffraction. For the first time, (NH4)2[Ir(NH3)Cl5] and (NH4)2[Ir(NH3)Br5] have been proven as intermediates of thermal decomposition of (NH4)3[IrCl6]·H2O, (NH4)2[IrCl6] and (NH4)2[IrBr6]. Thermal degradation of (NH4)2[IrCl6] and (NH4)2[IrBr6] is a more complex process as suggested previously and includes simultaneous formation of (NH4)2[Ir(NH3)Cl5] and (NH4)2[Ir(NH3)Br5] intermediates mixed with metallic iridium. In the inert atmosphere, complexes (NH4)[Ir(NH3)2Cl4] and (NH4)[Ir(NH3)2Br4] as well as [Ir(NH3)3Br3] were proposed as possible intermediates before formation of metallic iridium particles.

Luminescent Zn(ii) and Cd(ii) complexes with chiral 2,2'-bipyridine ligands bearing natural monoterpene groups: synthesis, speciation in solution and photophysics.

Mononuclear zinc(ii) and cadmium(ii) complexes, ZnLCl2 (1), CdLCl2 (2), ZnL1Cl2·2H2O (3), and CdL1Cl2·2H2O (4), with chiral ligands containing a 2,2'-bipyridine moiety and natural terpene (+)-limonene (L) or (+)-3-carene (L1) moieties were synthesized. In these complexes the L and L1 ligands are shown to coordinate Zn2+ and Cd2+ ions through the 2,2'-bipyridine moiety. The acetamide group of the ligands interacts with M2+ ions by forming NM2+ and C[double bond, length as m-dash]OM2+ contacts and N-HCl hydrogen bonds with coordinated Cl- ions. In solutions the complexes have several conformers differing by the degree of the turn of the acetamide moiety relative to the ligand core and the type of its interaction with the coordination core. The ligands and complexes exhibit luminescence with the quantum yield increasing in the order: ligand < cadmium(ii) complex < zinc(ii) complex. The complexes 3 and 4 demostrate excitation wavelength independent single-channel fluorescence. As opposed to 3 and 4, the complexes 1 and 2 demonstrate excitation wavelength dependent emission with nanosecond and microsecond lifetimes of the excited states. According to our TD-DFT calculations, an interplay of ligand centered and halide to ligand transitions facilitates two deactivation channels in 1 and 2: S1-S0 and T1-S0.

Light-Induced Sulfur Transport inside Single-Walled Carbon Nanotubes.

Filling of single-walled carbon nanotubes (SWCNTs) and extraction of the encapsulated species from their cavities are perspective treatments for tuning the functional properties of SWCNT-based materials. Here, we have investigated sulfur-modified SWCNTs synthesized by the ampoule method. The morphology and chemical states of carbon and sulfur were analyzed by transmission electron microscopy, Raman scattering, thermogravimetric analysis, X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopies. Successful encapsulation of sulfur inside SWCNTs cavities was demonstrated. The peculiarities of interactions of SWCNTs with encapsulated and external sulfur species were analyzed in details. In particular, the donor-acceptor interaction between encapsulated sulfur and host SWCNT is experimentally demonstrated. The sulfur-filled SWCNTs were continuously irradiated in situ with polychromatic photon beam of high intensity. Comparison of X-ray spectra of the samples before and after the treatment revealed sulfur transport from the interior to the surface of SWCNTs bundles, in particular extraction of sulfur from the SWCNT cavity. These results show that the moderate heating of filled nanotubes could be used to de-encapsulate the guest species tuning the local composition, and hence, the functional properties of SWCNT-based materials.

Effect of Mo on the catalytic activity of Ni-based self-organizing catalysts for processing of dichloroethane into segmented carbon nanomaterials.

A series of micro-disperse Ni-Mo alloys with the sponge-like structure was prepared by a simultaneous precipitation method followed by sintering of the sediment in H2 atmosphere at 800 °C. According to XRD data, the formation of single-phase solid solution Ni1-xMox took place for the samples with Mo content of 0.6-8.3 wt.%. Synthesized samples were studied in a process of the catalytic CVD of C2H4Cl2 at 550-700 °C. In situ kinetic studies of carbon deposition process were carried out in a flow gravimetric setup equipped with McBain balances. An interaction of Ni-Mo alloys with C2H4Cl2 is accompanied by their rapid disintegration with formation of disperse active particles catalyzing the growth of carbon nanomaterials (CNM). The strong boosting effect of Mo on the catalytic performance of Ni was revealed. The maximum yield of CNM product (8.3 wt.% Mo, 600 °C, 120 min) was as high as 45 g/gM. The study on effect of the reaction temperature on the CNM yield allowed one to define an optimal temperature regime. The impact of Mo concentration upon the morphology, structural features and textural properties of the produced carbon fibers was investigated by means of SEM, TEM, Raman spectroscopy and low-temperature nitrogen adsorption. The role of chemisorbed chlorine species in a pulse-to-pulse regime of the segmented carbon filaments formation was discussed.

Percolative Composites with Carbon Nanohorns: Low-Frequency and Ultra-High Frequency Response.

We systematically studied the electromagnetic properties of carbon nanohorns (CNHs) and polystyrene composites filled with CNHs in static regime, low frequency and microwave regions. CNHs were synthesized using the direct current arc-discharge method using solid graphite rods and graphite rods filled by melamine mixed with graphite powder. Transmission electron microscopy and thermo-gravimetric analysis showed that CNH agglomerates are the main product, while the addition of melamine promotes the formation of graphite balls. Graphitic contamination causes the internal leakage of inter-agglomerate capacity, lowering the permittivity and enhancing the conductivity of composites. The permittivity of CNH/polystyrene composites increases with the filler fraction, and near the dielectric threshold electromagnetic characteristics of the composites exhibit critical behaviour. Our results suggest that CNHs with relatively high values of permittivity and contact resistance could be used as high-k materials.

Porous Nanocrystalline Silicon Supported Bimetallic Pd-Au Catalysts: Preparation, Characterization, and Direct Hydrogen Peroxide Synthesis.

Bimetallic Pd-Au catalysts were prepared on the porous nanocrystalline silicon (PSi) for the first time. The catalysts were tested in the reaction of direct hydrogen peroxide synthesis and characterized by standard structural and chemical techniques. It was shown that the Pd-Au/PSi catalyst prepared from conventional H2[PdCl4] and H[AuCl4] precursors contains monometallic Pd and a range of different Pd-Au alloy nanoparticles over the oxidized PSi surface. The PdAu2/PSi catalyst prepared from the [Pd(NH3)4][AuCl4]2 double complex salt (DCS) single-source precursor predominantly contains bimetallic Pd-Au alloy nanoparticles. For both catalysts the surface of bimetallic nanoparticles is Pd-enriched and contains palladium in Pd0 and Pd2+ states. Among the catalysts studied, the PdAu2/PSi catalyst was the most active and selective in the direct H2O2 synthesis with H2O2 productivity of 0.5 [Formula: see text] at selectivity of 50% and H2O2 concentration of 0.023 M in 0.03 M H2SO4-methanol solution after 5 h on stream at -10°C and atmospheric pressure. This performance is due to high activity in the H2O2 synthesis reaction and low activities in the undesirable H2O2 decomposition and hydrogenation reactions. Good performance of the PdAu2/PSi catalyst was associated with the major part of Pd in the catalyst being in the form of the bimetallic Pd-Au nanoparticles. Porous silicon was concluded to be a promising catalytic support for direct hydrogen peroxide synthesis due to its inertness with respect to undesirable side reactions, high thermal stability, and conductivity, possibility of safe operation at high temperatures and pressures and a well-established manufacturing process.

Bromo- and Polybromoantimonates(V): Structural and Theoretical Studies of Hybrid Halogen-Rich Halometalate Frameworks.

Cation-dependent reactions "[SbBr6 ]3- +Br2 +HBr+CationBrx " result in the formation of bromide/polybromide complexes with zero-, one-, two-, or three-dimensional supramolecular frameworks and different Br/Sb ratios (up to 11). Seven new compounds representing six structural types were characterized by XRD and thermogravimetric analysis and DFT calculations enabled estimation of the energies of the Br⋅⋅⋅Br contacts (1.1-4.6 kcal mol-1 ).

Preparation of Zr(Mo,W)2O8 with a larger negative thermal expansion by controlling the thermal decomposition of Zr(Mo,W)2(OH,Cl)2∙2H2O.

Solid solutions of Zr(Mo,W)2O7(OH,Cl)2∙2H2O with a preset ratio of components were prepared by a hydrothermal method. The chemical composition of the solutions was determined by energy dispersive X-ray spectroscopy (EDX). For all the samples of ZrMoxW2-xO7(OH,Cl)2∙2H2O (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0), TGA and in situ powder X-ray diffraction (PXRD) studies (300-1100 K) were conducted. For each case, the boundaries of the transformations were determined: Zr(Mo,W)2O7(OH,Cl)2∙2H2O → orthorhombic-ZrMoxW2-xO8 (425-525 K), orthorhombic-ZrMoxW2-xO8 → cubic-ZrMoxW2-xO8 (700-850 K), cubic-ZrMoxW2-xO8 → trigonal-ZrMoxW2-xO8 (800-1050 K for x > 1) and cubic-ZrMoxW2-xO8 → oxides (1000-1075 K for x ≤ 1). The cell parameters of the disordered cubic-ZrMoxW2-xO8 (space group Pa-3) were measured within 300-900 K, and the thermal expansion coefficients were calculated: -3.5∙10-6 - -4.5∙10-6 K-1. For the ordered ZrMo1.8W0.2O8 (space group P213), a negative thermal expansion (NTE) coefficient -9.6∙10-6 K-1 (300-400 K) was calculated. Orthorhombic-ZrW2O8 is formed upon the decomposition of ZrW2O7(OH,Cl)2∙2H2O within 500-800 K.

Bromine-rich complexes of bismuth: experimental and theoretical studies.

Three novel polybromide complexes of bismuth(iii) - (2,6-MePyH)3[BiBr5(Br3)] (1), (H2bpp){[BiBr5](Br2)} (2) and (3-ClPyH)2{[BiBr5](Br2)} (3) - were synthesized. The results of an extended screening involving a set of organic cations resulting in the formation/non-formation of Bi(iii) polybromides are presented and discussed. The nature of BrBr interactions in Bi(iii) polybromides was investigated by theoretical methods, enabling the estimation of their energies.

Synthesis and Concentration of Organosols of Silver Nanoparticles Stabilized by AOT: Emulsion Versus Microemulsion.

In this work, we tried to combine the advantages of microemulsion and emulsion synthesis to obtain stable concentrated organosols of Ag nanoparticles, promising liquid-phase materials. Starting reagents were successively introduced into a micellar solution of sodium bis-(2-ethylhexyl)sulfosuccinate (AOT) in n-decane in the dynamic reverse emulsion mode. During the contact of the phases, Ag+ passes into micelles and Na+ passes into emulsion microdroplets through the cation exchange AOTNaOrg + AgNO3Aq = AOTAgOrg + NaNO3Aq. High concentrations of NaNO3 and hydrazine in the microdroplets favor an osmotic outflow of water from the micelles, which reduces their polar cavities to ∼2 nm. As a result, silver ions are contained in the micelles, and the reducing agent is present mostly in emulsion microdroplets. The reagents interact in the polar cavities of micelles to form ∼7 nm Ag nanoparticles. The produced nanoparticles are positively charged, which permitted their electrophoretic concentration to obtain liquid concentrates (up to 30% Ag) and a solid Ag-AOT composite (up to 75% Ag). Their treatment at 250 °C leads to the formation of conductive films (180 mOhm per square). The developed technique makes it possible to increase the productivity of the process by ∼30 times and opens up new avenues of practical application for the well-studied microemulsion synthesis.

Facile Substitution of Bridging SO22- Ligands in Re12 Bioctahedral Cluster Complexes.

Selective substitution of µ-SO22- groups by either O2- or Se2- ions occurs upon heating the bioctahedral rhenium cluster complex K6[Re12CS14(µ-SO2)3(CN)6] in air atmosphere or in the presence of a Se source, respectively, manifesting the remarkable lability of SO22- ligands bound to a transition-metal cluster. A series of compounds based on the new mixed-ligand anions, [Re12CS14(µ-O)3(CN)6]6-, [Re12CS14(µ-Se)3(CN)6]6-, and [Re12CS14(µ-O)3(OH)6]6-, were isolated and their solid-state structures were elucidated by single-crystal X-ray diffraction analysis. Along with the previously reported µ-sulfide clusters, the new species constitute a series of rhenium anionic complexes with the common formula [Re12CS14(µ-Q)3L6]6- (Q = O, S, Se, L = CN-; Q = O, S, L = OH-), within which the total charge and number of cluster valence electrons (CVEs) are constant. The article presents insights into the mechanistic and synthetic aspects of the substitution process, and it comprehensively discusses the influence of inner ligand environment on the structure, spectroscopic characteristics, and electrochemical behavior of the novel compounds.

Volatile heterometallics: structural diversity of Pd-Pb ß-diketonates and correlation with thermal properties.

Volatile heterobimetallics based on Pb(ii) hexafluoroacetylacetonate as a host material and a range of Pd(ii) complexes containing both various donor atoms and terminal substituents in the ß-diketonate ligand have been studied to trace the influence of the nature of the initial monometallic complexes on the structure, composition and thermal properties of heterobimetallic compounds. The structural variety and stoichiometry of the heterobimetallic compounds are caused by various combinations of the competing donor-acceptor interactions between the constituting monometallic moieties. The major structure forming factor is the metallophilic interaction between Pd and Pb atoms resulting in polynuclear structures with a specific topology. The structural motif (discrete or polymeric) for the compounds significantly depends on the structure and composition of the initial monometallic complexes. The approach for explaining and predicting the thermal stability of these compounds is proposed by using their structural data and the results of quantum chemistry calculations.