Optimizing Antimicrobial Efficacy: Investigating the Impact of Zinc Oxide Nanoparticle Shape and Size.

Zinc oxide nanoparticles (ZnO NPs) have been investigated due to their distinct properties, variety of structures and sizes, and mainly for their antimicrobial activity. They have received a positive safety evaluation from the European Food Safety Authority (EFSA) for packaging applications as transparent ultraviolet (UV) light absorbers based on the absence of significant migration of zinc oxide in particulate form. ZnO NPs with different morphologies (spherical, flower, and sheet) have been synthesized via different sol-gel methods and extensively characterized by several solid-state techniques, namely vibrational spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-VIS), electron paramagnetic resonance (EPR), and nitrogen adsorption-desorption isotherms. The ZnO NPs were assessed for their antibacterial activity against Escherichia coli (gram-negative bacteria) and Staphylococcus aureus (gram-positive bacteria) to study the influence of morphology and size on efficacy. ZnO NPs with different morphologies and sizes demonstrated antimicrobial activity against both bacteria. The highest microbial cell reduction rate (7-8 log CFU mL-1 for E. coli and 6-7 log CFU mL-1 for S. aureus) was obtained for the sheet- and spherical-shaped NPs as a result of the high specific surface area. In fact, the higher surface areas of the sheet- and spherical-shaped nanoparticles (18.5 and 13.4 m2 g-1, respectively), compared to the flower-shaped NPs (5.3 m2g-1), seem to promote more efficient bacterial cell reduction. The spherical-shaped particles were also smaller (31 nm) compared with the flower-shaped (233 × 249 nm) ones. The flower ZnO NP resulted in a 4-5 log CFU mL-1 reduction for E. coli and 3-4 log CFU mL-1 reduction for S. aureus. The lower apparent antibacterial activity of the flower-shaped could be associated with either the lack of defects on the particle core or the shape shielding effect. Compared to S. aureus, E. coli seems to be less resistant to ZnO NPs, which may be explained by the characteristics of its cell membrane. With simple synthesis techniques, which do not allow the size and shape of the nanoparticles to be controlled simultaneously, it is a challenge to elucidate the effect of each of these two parameters on antibacterial performance.

Development of a layered bacterial nanocellulose-PHBV composite for food packaging.

BACKGROUND: Most of the current materials used in food packaging are synthetic and non-degradable, raising environmental issues derived from the accumulation of plastics in landfills/waterways. The food industry increasingly needs eco-friendly sustainable materials that meet food-packaging requirements. Bacterial nanocellulose (BNC), a biopolymer obtained by fermentation, offers very good mechanical properties and the ability to carry and deliver active substances. However, its water-vapor permeability is too high for food-packaging applications. In this work, a layered biodegradable composite based on BNC and polyhydroxyalkanoate (PHBV) was produced, attempting to improve its overall barrier properties. Polyhydroxyalkanoate is a biopolymer with high degree of hydrophobicity and biodegradability, and is also obtained by fermentation. Wet BNC membranes produced by static culture were plasticized by impregnation of solutions of either glycerol (BNCgly ) or polyethylene glycol (MW 600) (BNCPEG ). The plasticized BNC was then coated with PHBV solution dissolved in formic acid, and oven dried at 148 °C. RESULTS: Overall, PHBV coating on plasticized BNC reduced water vapor permeability significantly (from 0.990 to 0.032 g.µm.m-2 .day-1 .Pa-1 ) under 50% relative humidity. It increased the hydrophobicity (contact angle from 10-40° to 80-90°) but decreased the stiffness (from 3.1 GPa to 1.3 Gpa) of the composite. CONCLUSIONS: Overall, the mechanical and barrier properties of the layered composite obtained were considered suitable for food-packaging applications. The plasticizing (with glycerol or polyethylene glycol) of BNC significantly improved the mechanical performance and the PHBV coating reduced the water affinity (vapor and liquid state) on BNC. © 2022 Society of Chemical Industry.

Recycling of polypropylene by supercritical carbon dioxide for extraction of contaminants from beverage cups. A comparison with polyethylene terephthalate and polylactic acid.

BACKGROUND: EU policies towards a circular economy address plastic packaging as one of the significant concerns and sets ambitious recycling targets. Polyolefins (POs) cannot be recycled for food contact using conventional polyethylene terephthalate (PET) recycling approaches. Thermal degradation prevents the use of high temperatures and, consequently, decontamination of POs may be insufficient when using lower temperatures. Polypropylene (PP) beverage cups were decontaminated using supercritical fluid extraction with carbon dioxide (scCO2 ). Decontamination efficiencies (DEs) of selected markers were determined in challenge tests following European Food Safety Authority guidelines. The effects of time (10-60 min) for PET, polylactic acid (PLA), and PP and temperature (60-80 °C) for PP were studied at constant pressure. The physical properties, sensorial properties, and overall migration of treated scCO2 PP were analysed and compared with virgin PP. RESULTS: PP showed the highest average DE, and PET the lowest, for all the surrogates and in all time conditions. A relative increase in the DE with the increase in process time, particularly for PET and to some extent for PLA, was seen. For PP, no significant impact of time and temperature was observed under the conditions tested. The DE of volatile surrogates was higher than that of semi-volatiles. Results indicate that the scCO2 treatment did not affect the physical and sensorial properties, nor the overall migration of PP, although it contributes to a considerable reduction in extractable n < C24 alkanes. CONCLUSIONS: Results indicate that scCO2 can be used to decontaminate post-consumption PP beverage cups with higher DEs than those for PET and PLA, applying mild processing conditions. © 2022 Society of Chemical Industry.

Nanocellulose Bio-Based Composites for Food Packaging.

The food industry is increasingly demanding advanced and eco-friendly sustainable packaging materials with improved physical, mechanical and barrier properties. The currently used materials are synthetic and non-degradable, therefore raising environmental concerns. Consequently, research efforts have been made in recent years towards the development of bio-based sustainable packaging materials. In this review, the potential of nanocelluloses as nanofillers or as coatings for the development of bio-based nanocomposites is discussed, namely: (i) the physico-chemical interaction of nanocellulose with the adjacent polymeric phase, (ii) the effect of nanocellulose modification/functionalization on the final properties of the composites, (iii) the production methods for such composites, and (iv) the effect of nanocellulose on the overall migration, toxicity, and the potential risk to human health. Lastly, the technology readiness level of nanocellulose and nanocellulose based composites for the market of food packaging is discussed.

Phytochemicals preservation in strawberry as affected by pH modulation.

Strawberries purées are incorporated in foods and subjected to pH modulation according to the expected final food matrix. The effect of pH on strawberry polyphenols stored at 4 and 23 °C for 90 days was evaluated. Total antioxidant activity and total phenolics content were only affected by time according to a first order model. The pH 4.5 induced higher decrease in (-)-epigallocatechin gallate (71% and 79%) and quercetin-3-glucoside (29% and 36%), for both storage temperatures. For pH 2.5 and 3.0, ellagic acid increased 84% for 4 °C and 185% for 23 °C. Anthocyanins concentration changes along storage were well described by first order model. The pH value of 2.5 presented the lower kinetic constant rate where cyanidin-3-glucoside, pelargonidin-3-glucoside and pelargonidin-3-rutinoside had a k=0.04, 0.05 and 0.03 day(-1). Lower storage temperature (4 °C) and lower pH (2.5) were the best condition for the preservation of polyphenols in pasteurized strawberry during a 90-day storage period.