Manure-derived hydrochar superior to manure: Reducing non-point pollution risk by altering nitrogen and phosphorus fugacity in the soil-water system.

Hydrothermal carbonization (HTC) technology is an emerging technology for the disposal of manure-based wet wastes. However, the effects of manure-derived hydrochar inputs to agricultural soils on nitrogen (N) and phosphorus (P) morphology and conversion in soil-water systems remain largely unexplored. In this study, pig and cattle manure (PM and CM), and their derived hydrochar (PCs and CCs) were applied to agricultural soils, with changes in nutrient morphology and enzyme activities related to N and P transformation in the soil-water systems observed through flooded incubation experiments. The results showed that floodwater ammonia N concentrations were reduced by 12.9-29.6% for PCs relative to PM, and 21.6-36.9% for CCs relative to CM, respectively. Moreover, floodwater total P concentrations of PCs and CCs were reduced by 11.7-20.7% relative to PM and CM. Soil enzyme activities closely related to N and P transformations in the soil-water system responded differently to manure and manure-derived hydrochar application. Compared to manure, the application of manure-derived hydrochar inhibited soil urease and acid phosphatase activity by up to 59.4% and 20.3%, respectively, whereas it had significant promotion effects on soil nitrate reductase (∼69.7%) and soil nitrite reductase (∼64.0%). The products of manure after HTC treatments have the characteristics of organic fertilizers, and the fertilization effects of PCs are more prominent than CCs, which are subject to further verification in field trials. Our findings improve the current understanding of manure-derived organic matter affecting N and P conversions in soil-water systems and the risk for non-point source pollution.

Every coin has two sides: Continuous and substantial reduction of ammonia volatilization under the coexistence of microplastics and biochar in an annual observation of rice-wheat rotation system.

Microplastics (MPs) are verified to affect the fate of ammonia (NH3) in agricultural soils. However, the impacts and mechanisms of MPs coupled with biochar (BC), a widely used agricultural conditioner, on NH3 losses are mostly untapped. The aim of this study was to investigate the mechanisms of common MPs (i.e., polyethylene, polyester, and polyacrylonitrile) and straw-derived BC on NH3 volatilization in rice-wheat rotation soils. Results showed that BC alone and MPs with BC (MPs + BC) reduced 5.5 % and 11.2-26.6 % cumulative NH3 volatilization than the control (CK), respectively, in the rice season. The increased nitrate concentration and soil cation exchange capacity were dominant contributors to the reduced soil NH3 volatilization in the rice season. BC and MPs + BC persistently reduced 44.5 % and 60.0-62.6 % NH3 losses than CK in the wheat season as influenced by pH and nitrate concentration. Moreover, BC and MPs + BC increased humic acid-like substances in soil dissolved organic matter by an average of 159.1 % and 179.6 % than CK, respectively, in rice and wheat seasons. The increased adsorption of soil NH4+ and the promotion of crop root growth were the main mechanisms of NH3 reduction. Our findings partially revealed the mechanisms of the coexistence of MPs and BC on NH3 mitigation in rice-wheat rotational ecosystems.

Hydrochar amendments stimulate soil nitrous oxide emission by increasing production of hydroxyl radicals and shifting nitrogen functional genes in the short term: A culture experiment.

The application of waste biomass-derived hydrochar to soil may cause extremely intensive nitrous oxide (N2O) fluxes that can challenge our current mechanistic understanding of the global nitrogen cycle in the biosphere. In this study, two waste biomasses were used to prepare cyanobacterial biomas-derived hydrochar (CHC) and wheat straw-derived hydrochar (SHC) for short-term incubation experiments to identify their effects and mechanisms of waste biomass-derived hydrochar on soil N2O efflux, with time-series samples collected for N2O efflux and soil analysis. The results showed that CHC and SHC caused short-term bursts of N2O effluxes without nitrogen inputs. Moreover, the enrichment of exogenous organics and nutrients at the hydrochar-soil interface was identified as the key factor for enhancing N2O fluxes, which stimulated microbial nitrification (i.e., increased gene copy number of ammonia oxidizing bacteria) and denitrification (i.e., increased gene copy number of nitrate and N2O reducing bacteria) processes. The concentrations of Fe (II) and hydroxyl radicals (HO•) were 6.49 and 5.63 times higher, respectively, in the hydrochar layer of CHC than SHC amendment. Furthermore, structural equation models demonstrated that HO•, as well as soil microbiomes, played an important role in driving N2O fluxes. Together, our findings provide a deeper insight into the assessment and prognosis of the short-term environmental risk arising from agricultural waste management in integrated agriculture. Further studies under practical field application conditions are warranted to verify the findings.

Synthesis, characterisation and thermo-physical properties of highly stable graphene oxide-based aqueous nanofluids for potential low-temperature direct absorption solar applications.

Two types of highly stable 0.1% graphene oxide-based aqueous nanofluids were synthesised and investigated. The first nanofluid (GO) was prepared under the influence of ultrasonic irradiation without surfactant. The second nanofluid was treated with tetra ethyl ammonium hydroxide to reduce the graphene oxide to form reduced graphene oxide (RGO) during ultrasonic irradiation. The GO and RGO powders were characterised by various techniques such as field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and Raman. Also UV-visible absorption spectroscopy was carried out and band gap energies were determined. Optical band gap energies for indirect transitions ranged from 3.4 to 4.4 eV and for direct transitions they ranged between 2.2 and 3.7 eV. Thermal conductivity measurements of the GO-based aqueous nanofluid revealed an enhancement of 9.5% at 40 °C compared to pure water, while the RGO-based aqueous nanofluid at 40 °C had a value 9.23% lower than pure water. Furthermore, the photothermal response of the RGO-based aqueous nanofluid had a temperature increase of 13.5 °C, (enhancement of 60.2%) compared to pure water, the GO-based aqueous nanofluid only displayed a temperature rise of 10.9 °C, (enhancement of 46.6%) after 20 min exposure to a solar irradiance of 1000 W m-2. Both nanofluid types displayed good long-term stability, with the GO-based aqueous nanofluid having a zeta potential of 30.3 mV and the RGO-based aqueous nanofluid having a value of 47.6 mV after 6 months. The good dispersion stability and photothermal performance makes both nanofluid types very promising working fluids for low-temperature direct absorption solar collectors.

Chicken Gut Microbiome and Human Health: Past Scenarios, Current Perspectives, and Futuristic Applications.

Sustainable poultry practices are needed to maintain an adequate supply of poultry products to the increasing human population without compromising human wellbeing. In order to achieve the understanding of the core microbiome that assumes an imperative role in digestion, absorption, and assimilation of feed as well as restrict the growth of pathogenic strains, a proper meta-data survey is required. The dysbiosis of the core microbiome or any external infection in chickens leads to huge losses in the poultry production worldwide. Along with this, the consumption of infected meat also impacts on human health as chicken meat is a regular staple in many diets as a vital source of protein. To tackle these losses, sub-therapeutic doses of antibiotics are being used as a feed additive along with other conventional approaches including selective breeding and modulation in feed composition. Altogether, these conventional approaches have improved the yield and quality of poultry products, however, the use of antibiotics encompasses the risk of developing multi-drug resistant pathogenic strains that can be harmful to human beings. Thus, there is an urgent need to understand the chicken microbiome in order to modulate chicken gut microbiome and provide alternatives to the conventional methods. Although there is now emerging literature available on some of these important microbiome aspects, in this article, we have analysed the relevant recent developments in understanding the chicken gut microbiome including the establishment of integrated gene catalogue for chicken microbiome. We have also focussed on novel strategies for the development of a chicken microbial library that can be used to develop novel microbial consortia as novel probiotics to improve the poultry meat production without compromising human health. Thus, it can be an alternative and advanced step compared to other conventional approaches to improve the gut milieu and pathogen-mediated loss in the poultry industry.

Biogenic Au@ZnO core-shell nanocomposites kill Staphylococcus aureus without provoking nuclear damage and cytotoxicity in mouse fibroblasts cells under hyperglycemic condition with enhanced wound healing proficiency.

The aim of the present study is focused on the synthesis of Au@ZnO core-shell nanocomposites, where zinc oxide is overlaid on biogenic gold nanoparticles obtained from Hibiscus Sabdariffa plant extract. Optical property of nanocomposites is investigated using UV-visible spectroscopy and crystal structure has been determined using X-ray crystallography (XRD) technique. The presence of functional groups on the surface of Au@ZnO core-shell nanocomposites has been observed by Fourier transforms infrared (FTIR) spectroscopy. Electron microscopy studies revealed the morphology of the above core-shell nanocomposites. The synthesized nanocomposite material has shown antimicrobial and anti-biofilm activity against Staphylococcus aureus and Methicillin Resistant Staphylococcus haemolyticus (MRSH). The microbes are notorious cross contaminant and are known to cause infection in open wounds. The possible antimicrobial mechanism of as synthesized nanomaterials has been investigated against Staphylococcus aureus and obtained data suggests that the antimicrobial activity could be due to release of reactive oxygen species (ROS). Present study has revealed that surface varnishing of biosynthesized gold nanoparticles through zinc oxide has improved its antibacterial proficiency against Staphylococcus aureus, whereas reducing its toxic effect towards mouse fibroblast cells under normal and hyperglycaemic condition. Further studies have been performed in mice model to understand the wound healing efficiency of Au@ZnO nanocomposites. The results obtained suggest the possible and effective use of as synthesized core shell nanocomposites in wound healing.

Progress towards Sustainable Utilisation and Management of Food Wastes in the Global Economy.

In recent years, the problem of food waste has attracted considerable interest from food producers, processors, retailers, and consumers alike. Food waste is considered not only a sustainability problem related to food security, but also an economic problem since it directly impacts the profitability of the whole food supply chain. In developed countries, consumers are one of the main contributors to food waste and ultimately pay for all wastes produced throughout the food supply chain. To secure food and reduce food waste, it is essential to have a comprehensive understanding of the various sources of food wastes throughout the food supply chain. The present review examines various reports currently in the literature and quantifies waste levels and examines the trends in wastage for various food sectors such as fruit and vegetable, fisheries, meat and poultry, grain, milk, and dairy. Factors contributing to food waste, effective cost/benefit food waste utilisation methods, sustainability and environment considerations, and public acceptance are identified as hurdles in preventing large-scale food waste processing. Thus, we highlight the need for further research to identify and report food waste so that government regulators and food supply chain stakeholders can actively develop effective waste utilisation practices.

Green Synthesis of Metallic Nanoparticles via Biological Entities.

Nanotechnology is the creation, manipulation and use of materials at the nanometre size scale (1 to 100 nm). At this size scale there are significant differences in many material properties that are normally not seen in the same materials at larger scales. Although nanoscale materials can be produced using a variety of traditional physical and chemical processes, it is now possible to biologically synthesize materials via environment-friendly green chemistry based techniques. In recent years, the convergence between nanotechnology and biology has created the new field of nanobiotechnology that incorporates the use of biological entities such as actinomycetes algae, bacteria, fungi, viruses, yeasts, and plants in a number of biochemical and biophysical processes. The biological synthesis via nanobiotechnology processes have a significant potential to boost nanoparticles production without the use of harsh, toxic, and expensive chemicals commonly used in conventional physical and chemical processes. The aim of this review is to provide an overview of recent trends in synthesizing nanoparticles via biological entities and their potential applications.

The synthesis, characterisation and in vivo study of a bioceramic for potential tissue regeneration applications.

Hydroxyapatite (HAP) is a biocompatible ceramic that is currently used in a number of current biomedical applications. Recently, nanometre scale forms of HAP have attracted considerable interest due to their close similarity to the inorganic mineral component of the bone matrix found in humans. In this study ultrafine nanometre scale HAP powders were prepared via a wet precipitation method under the influence of ultrasonic irradiation. The resulting powders were compacted and sintered to form a series of ceramic pellets with a sponge-like structure with varying density and porosity. The crystalline structure, size and morphology of the powders and the porous ceramic pellets were investigated using advanced characterization techniques. The pellets demonstrated good biocompatibility, including mixed cell colonisation and matrix deposition, in vivo following surgical implantation into sheep M. latissimus dorsi.

Chemical synthesis, characterisation, and biocompatibility of nanometre scale porous anodic aluminium oxide membranes for use as a cell culture substrate for the vero cell line: a preliminary study.

In this preliminary study we investigate for the first time the biomedical potential of using porous anodic aluminium oxide (AAO) membranes as a cell substrate for culturing the Cercopithecus aethiops (African green monkey) Kidney (Vero) epithelial cell line. One advantage of using the inorganic AAO membrane is the presence of nanometre scale pore channels that allow the exchange of molecules and nutrients across the membrane. The size of the pore channels can be preselected by adjusting the controlling parameters of a temperature controlled two-step anodization process. The cellular interaction and response of the Vero cell line with an in-house synthesised AAO membrane, a commercially available membrane, and a glass control were assessed by investigating cell adhesion, morphology, and proliferation over a 72 h period. The number of viable cells proliferating over the respective membrane surfaces revealed that the locally produced in-house AAO membrane had cells numbers similar to the glass control. The study revealed evidence of focal adhesion sites over the surface of the nanoporous membranes and the penetration of cellular extensions into the pore structure as well. The outcome of the study has revealed that nanometre scale porous AAO membranes have the potential to become practical cell culture scaffold substrates with the capability to enhance adhesion and proliferation of Vero cells.

Engineering a biocompatible scaffold with either micrometre or nanometre scale surface topography for promoting protein adsorption and cellular response.

Surface topographical features on biomaterials, both at the submicrometre and nanometre scales, are known to influence the physicochemical interactions between biological processes involving proteins and cells. The nanometre-structured surface features tend to resemble the extracellular matrix, the natural environment in which cells live, communicate, and work together. It is believed that by engineering a well-defined nanometre scale surface topography, it should be possible to induce appropriate surface signals that can be used to manipulate cell function in a similar manner to the extracellular matrix. Therefore, there is a need to investigate, understand, and ultimately have the ability to produce tailor-made nanometre scale surface topographies with suitable surface chemistry to promote favourable biological interactions similar to those of the extracellular matrix. Recent advances in nanoscience and nanotechnology have produced many new nanomaterials and numerous manufacturing techniques that have the potential to significantly improve several fields such as biological sensing, cell culture technology, surgical implants, and medical devices. For these fields to progress, there is a definite need to develop a detailed understanding of the interaction between biological systems and fabricated surface structures at both the micrometre and nanometre scales.

Photothermal response of CVD synthesized carbon (nano)spheres/aqueous nanofluids for potential application in direct solar absorption collectors: a preliminary investigation.

Direct-absorption solar collectors have the potential to offer an unlimited source of renewable energy with minimal environmental impact. Unfortunately, their performance is limited by the absorption efficiency of the working fluid. Nanoparticles of functionalized carbon nanospheres (CNS) have the potential to improve the photothermal properties of the working fluid. CNS are produced by the pyrolysis of acetylene gas in a tube-based electric furnace/chemical vapor deposition apparatus. The reaction takes place at 1000°C in the presence of nitrogen gas without the use of a catalyst. The synthesized CNS were examined and characterized using field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectroscopy, Raman spectroscopy, thermal gravimetric analysis, and ultraviolet-visible analysis. The CNS powders with a mean particle size of 210 nm were then functionalized using tetraethylammonium hydroxide ([C2H5]4 N[OH]) and used to produce a series of aqueous nanofluids with varying mass content. The photothermal response of both the nanofluids and films composed of CNS were investigated under 1000 W/m(2) solar irradiation.

Ultrasonic synthetic technique to manufacture a pHEMA nanopolymeric-based vaccine against the H6N2 avian influenza virus: a preliminary investigation.

This preliminary study investigated the use of poly (2-hydroxyethyl methacrylate) (pHEMA) nanoparticles for the delivery of the deoxyribonucleic acid (DNA) vaccine pCAG-HAk, which expresses the full length hemagglutinin (HA) gene of the avian influenza A/Eurasian coot/Western Australian/2727/1979 (H6N2) virus with a Kozak sequence which is in the form of a pCAGGS vector. The loaded and unloaded nanoparticles were characterized using field-emission scanning electron microscopy. Further characterizations of the nanoparticles were made using atomic force microscopy and dynamic light scattering, which was used to investigate particle size distributions. This preliminary study suggests that using 100 µg of pHEMA nanoparticles as a nanocarrier/adjuvant produced a reduction in virus shedding and improved the immune response to the DNA vaccine pCAG-HAk.

Defluoridation behavior of nanostructured hydroxyapatite synthesized through an ultrasonic and microwave combined technique.

The absorption performance of a nano-structured hydroxyapatite produced from a combined ultrasonic and microwave technique was examined for the removal of fluoride from contaminated water. The effect of physical and chemical parameters such as initial pH, contact time, initial fluoride concentration and temperature were investigated. The results indicated that the equilibrium adsorption data followed both the Langmuir and Freundlich isotherms, with a maximum monolayer adsorption capacity of 5.5mg/g at 298K. In addition, the kinetic studies have shown that the fluoride adsorption data followed a pseudo-second order model and that the intra-particle diffusion process played a significant role in determining the rate. The thermodynamic analysis also established that the adsorption process was endothermic and spontaneous. The initial and final fluoride loaded nano-hydroxyapatite samples were characterized using FESEM, TEM, XRD, FTIR and XPS methods. The analysis revealed that structural changes to the adsorbent had taken place.

Progress in Nano-Engineered Anodic Aluminum Oxide Membrane Development.

The anodization of aluminum is an electro-chemical process that changes the surface chemistry of the metal, via oxidation, to produce an anodic oxide layer. During this process a self organized, highly ordered array of cylindrical shaped pores can be produced with controllable pore diameters, periodicity and density distribution. This enables anodic aluminum oxide (AAO) membranes to be used as templates in a variety of nanotechnology applications without the need for expensive lithographical techniques. This review article is an overview of the current state of research on AAO membranes and the various applications of nanotechnology that use them in the manufacture of nano-materials and devices or incorporate them into specific applications such as biological/chemical sensors, nano-electronic devices, filter membranes and medical scaffolds for tissue engineering.

Effect of dilute gelatine on the ultrasonic thermally assisted synthesis of nano hydroxyapatite.

A series of nano hydroxyapatite-gelatine composites with different dilute solutions of gelatine concentrations were synthesized by a thermally assisted low-power ultrasonic irradiation method. The gelatine hydroxyapatite, (Gel-HAP) nanoparticles were prepared using Ca(NO(3))(2) and KH(2)PO(4) in the presence of gelatine in an aqueous solution. The synthesised products were heat treated between 100 and 400°C. The effect of the addition of gelatine on the nucleation and growth of synthesised nano HAP was investigated. Characterisation was performed using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FT-IR). The characterisation results indicate that gelatine has been appended to the nano HAP forming regular spherical shaped crystals of nano sized Gel-HAP.

Significance of novel bioinorganic anodic aluminum oxide nanoscaffolds for promoting cellular response.

Tissue engineering is a multidisciplinary field that can directly benefit from the many advancements in nanotechnology and nanoscience. This article reviews a novel biocompatible anodic aluminum oxide (AAO, alumina) membrane in terms of tissue engineering. Cells respond and interact with their natural environment, the extracellular matrix, and the landscape of the substrate. The interaction with the topographical features of the landscape occurs both in the micrometer and nanoscales. If all these parameters are favorable to the cell, the cell will respond in terms of adhesion, proliferation, and migration. The role of the substrate/scaffold is crucial in soliciting a favorable response from the cell. The size and type of surface feature can directly influence the response and behavior of the cell. In the case of using an AAO membrane, the surface features and porosity of the membrane can be dictated at the nanoscale during the manufacturing stage. This is achieved by using general laboratory equipment to perform a relatively straightforward electrochemical process. During this technique, changing the operational parameters of the process directly controls the nanoscale features produced. For example, the pore size, pore density, and, hence, density can be effectively controlled during the synthesis of the AAO membrane. In addition, being able to control the pore size and porosity of a biomaterial such as AAO significantly broadens its application in tissue engineering.

Superhydrophobic nature of nanostructures on an indigenous Australian eucalyptus plant and its potential application.

In this preliminary study, the morphology and nanostructured features formed by the epicuticular waxes of the mottlecah (Eucalyptus macrocarpa) leaf were investigated and quantified. The surface features formed by the waxes give the leaf remarkable wetting and self-cleaning properties that enhance the plant's survival in an arid climate. This paper also provides experimental evidence of the self-assembly properties of the epicuticular waxes. Analysis of the water contact angle measurements gave a mean static contact angle of 162.00 ± 6.10 degrees, which clearly indicated that the mottlecah's leaf surface was superhydrophobic. Detailed field emission scanning electron microscopy examination revealed that the surface was covered by bumps approximately 20 µm in diameter and regularly spaced at a distance of around 26 µm. The bumps are capped by nanotubules/pillars with an average diameter of 280 nm at the tips. Self-cleaning experiments indicated that the mottlecah's leaf could be effectively cleaned by a fine spray of water droplets that rolled over the surface picking up contaminants. Field emission scanning electron microscopy investigation of extracted epicuticular waxes revealed that the waxes were capable of self-reassembly and formed features similar to those of the original leaf surface. Furthermore, also reported is a simple technique for surface treating one side of a planar surface to produce a superhydrophobic surface that can be used as a planar floatation platform for microdevices.