Recombination of the Phase-Variable spnIII Locus Is Independent of All Known Pneumococcal Site-Specific Recombinases.

Streptococcus pneumoniae is one of the world's leading bacterial pathogens, causing pneumonia, septicemia, and meningitis. In recent years, it has been shown that genetic rearrangements in a type I restriction-modification system (SpnIII) can impact colony morphology and gene expression. By generating a large panel of mutant strains, we have confirmed a previously reported result that the CreX (also known as IvrR and PsrA) recombinase found within the locus is not essential for hsdS inversions. In addition, mutants of homologous recombination pathways also undergo hsdS inversions. In this work, we have shown that these genetic rearrangements, which result in different patterns of genome methylation, occur across a wide variety of serotypes and sequence types, including two strains (a 19F and a 6B strain) naturally lacking CreX. Our gene expression analysis, by transcriptome sequencing (RNAseq), confirms that the level of creX expression is impacted by these genomic rearrangements. In addition, we have shown that the frequency of hsdS recombination is temperature dependent. Most importantly, we have demonstrated that the other known pneumococcal site-specific recombinases XerD, XerS, and SPD_0921 are not involved in spnIII recombination, suggesting that a currently unknown mechanism is responsible for the recombination of these phase-variable type I systems.IMPORTANCEStreptococcus pneumoniae is a leading cause of pneumonia, septicemia, and meningitis. The discovery that genetic rearrangements in a type I restriction-modification locus can impact gene regulation and colony morphology led to a new understanding of how this pathogen switches from harmless colonizer to invasive pathogen. These rearrangements, which alter the DNA specificity of the type I restriction-modification enzyme, occur across many different pneumococcal serotypes and sequence types and in the absence of all known pneumococcal site-specific recombinases. This finding suggests that this is a truly global mechanism of pneumococcal gene regulation and the need for further investigation of mechanisms of site-specific recombination.

Functional dissection of YabA, a negative regulator of DNA replication initiation in Bacillus subtilis.

The regulation of initiation of DNA replication is crucial to ensure that the genome is replicated only once per cell cycle. In the Gram-positive bacterium Bacillus subtilis, the function of the YabA protein in initiation control was assigned based on its interaction with the DnaA initiator and the DnaN sliding clamp in the yeast two-hybrid and on the overinitiation phenotype observed in a yabA null strain. However, YabA is unrelated to known regulators of initiation and interacts with several additional proteins that could also be involved directly or not in initiation control. Here, we investigated the specific role of YabA interactions with DnaA and DnaN in initiation control by identifying single amino acid changes in YabA that disrupted solely the interaction with DnaA or DnaN. These disruptive mutations delineated specific interacting surfaces involving a Zn2+-cluster structure in YabA. In B. subtilis, these YabA interaction mutations abolished both initiation control and the formation of YabA foci at the replication factory. Upon coexpression of deficient YabA mutants, mixed oligomers formed foci at the replisome and restored initiation control, indicating that YabA acts within a heterocomplex with DnaA and DnaN. In agreement, purified YabA oligomerized and formed complexes with DnaA and DnaN. These findings underscore the functional association of YabA with the replication machinery, indicating that YabA regulates initiation through coupling with the elongation of replication.

Early steps of Bacillus subtilis primosome assembly.

Primosomes are nucleoprotein assemblies designed for the activation of DNA replication forks. Their primary role is to recruit the replicative helicase onto single-stranded DNA. The "replication restart" primosome, defined in Escherichia coli, is involved in the reactivation of arrested replication forks. Binding of the PriA protein to forked DNA triggers its assembly. PriA is conserved in bacteria, but its primosomal partners are not. In Bacillus subtilis, genetic analysis has revealed three primosomal proteins, DnaB, DnaD, and DnaI, that have no obvious homologues in E. coli. Interestingly, they are involved in primosome function both at arrested replication forks and at the chromosomal origin. Our biochemical analysis of the DnaB and DnaD proteins unravels their role in primosome assembly. They are both multimeric and bind individually to DNA. Furthermore, DnaD stimulates DnaB binding activities. DnaD alone and the DnaD/DnaB pair interact specifically with PriA of B. subtilis on several DNA substrates. This suggests that the nucleoprotein assembly is sequential in the PriA, DnaD, DnaB order. The preferred DNA substrate mimics an arrested DNA replication fork with unreplicated lagging strand, structurally identical to a product of recombinational repair of a stalled replication fork.

DnaB, DnaD and DnaI proteins are components of the Bacillus subtilis replication restart primosome.

Phenotypes of Bacillus subtilis priA mutants suggest that they are deficient in the restart of stalled chromosomal replication forks. The presumed activity of PriA in the restart process is to promote the assembly of a multiprotein complex, the primosome, which functions to recruit the replication fork helicase onto the DNA. We have proposed previously that three proteins involved in the initiation of replication at oriC in B. subtilis, DnaB, DnaD and DnaI, are components of the PriA primosome in this bacterium. However, the involvement of these proteins in replication restart has not yet been studied. Here, we describe dnaB mutations that suppress the phenotypes of B. subtilis priA mutants. In a representative mutant, the DnaC helicase is loaded onto single-stranded DNA in a PriA-independent, DnaD- and DnaI-dependent manner. These observations confirm that DnaB, DnaD and DnaI are primosomal proteins in B. subtilis. Moreover, their involvement in the suppression of priA phenotypes shows that they participate in replication fork restart in B. subtilis.

IS911 transposition is regulated by protein-protein interactions via a leucine zipper motif.

Efficient intermolecular transposition of bacterial insertion sequence IS911 involves the activities of two element-encoded proteins: the transposase, OrfAB, and a regulatory factor, OrfA. OrfA shares the majority of its amino acid sequence with the N-terminal part of OrfAB. This includes a putative helix-turn-helix and three of four heptads of a leucine zipper motif. OrfA strongly stimulates OrfAB-mediated intermolecular transposition both in vivo and in vitro. The present results support the notion that this is accomplished by direct interaction between these two proteins via the leucine zipper. We used both a genetic approach, based on gene fusions with phage lambda repressor, and a physical approach, involving co-immunoprecipitation, to show that OrfA not only undergoes oligomerisation but is capable of engaging with OrfAB to form heteromultimers, and that the leucine zipper is necessary for both types of interaction. Furthermore, mutation of the leucine zipper in OrfA inactivated its regulatory function. Previous observations demonstrated that the integrity of the leucine zipper motif was also important for OrfAB binding to the IS911 terminal inverted repeats. Here, we show, in gel shift experiments, using a derivative of OrfAB deleted for the C-terminal catalytic domain, OrfAB[1-149], that the protein is capable of pairing two inverted repeats to generate a species resembling a "synaptic complex". Preincubation of OrfAB[1-149] with OrfA dramatically reduced formation of this complex and favored formation of an alternative complex devoid of OrfA. Together these results suggest that OrfA exerts its regulatory effect by interacting transiently with OrfAB via the leucine zipper and modifying OrfAB binding to the inverted repeats.

IS911 transposon circles give rise to linear forms that can undergo integration in vitro.

High levels of expression of the transposase OrfAB of bacterial insertion sequence IS911 leads to the formation of excised transposon circles, in which the two abutted ends are separated by 3 bp. Initially, OrfAB catalyses only single-strand cleavage at one 3' transposon end and strand transfer of that end to the other. It is believed that this molecule, in which both transposon ends are held together in a single-strand bridge, is then converted to the circular form by the action of host factors. The transposon circles can be integrated efficiently into an appropriate target in vivo and in vitro in the presence of OrfAB and a second IS911 protein OrfA. In the results reported here, we have identified linear transposon forms in vivo from a transposon present in a plasmid, raising the possibility that IS911 can also transpose using a cut-and-paste mechanism. However, the linear species appeared not to be derived directly from the plasmid-based copy by direct double-strand cleavages at both ends, but from preformed excised transposon circles. This was confirmed further by the observation that OrfAB can cleave a cloned circle junction both in vivo and in vitro by two single-strand cleavages at the 3' transposon ends to generate a linear transposon form with a 3'-OH and a three-nucleotide 5' overhang at the ends. Moreover, while significantly less efficient than the transposon circle, a precleaved linear transposon underwent detectable levels of integration in vitro. The possible role of such molecules in the IS911 transposition pathway is discussed.

Multiple oligomerisation domains in the IS911 transposase: a leucine zipper motif is essential for activity.

Structure-function relationships involved in oligomerisation of the transposase OrfAB of the bacterial insertion sequence IS911 have been investigated. Site-directed mutagenesis and sequential deletion coupled with immunoprecipitation have led to the definition of three regions of the protein capable of promoting multimerisation. These include a region predicted to assume a coiled-coil conformation, which is shown to be essential for activity, promoting correct multimerisation of the N-terminal domain of OrfAB and sequence-specific binding to the IS911 terminal inverted repeats mediated by this domain. This region presents the structural and functional characteristics of the leucine zipper motif described in eukaryotic proteins. The two other regions are located further towards the C-terminal end of the protein, adjacent to the leucine zipper and in the region that carries the conserved catalytic DD(35)E motif.

Efficient transposition of IS911 circles in vitro.

An in vitro system has been developed which supports efficient integration of transposon circles derived from the bacterial insertion sequence IS911. Using relatively pure preparations of IS911-encoded proteins it has been demonstrated that integration into a suitable target required both the transposase, OrfAB, a fusion protein produced by translational frameshifting between two consecutive open reading frames, orfA and orfB, and OrfA, a protein synthesized independently from the upstream orfA. Intermolecular reaction products were identified in which one or both transposon ends were used. The reaction also generated various intramolecular transposition products including adjacent deletions and inversions. The circle junction, composed of abutted left and right IS ends, retained efficient integration activity when carried on a linear donor molecule, demonstrating that supercoiling in the donor molecule is not necessary for the reaction. Both two-ended integration and a lower level of single-ended insertions were observed under these conditions. The frequency of these events depended on the spacing between the transposon ends. Two-ended insertion was most efficient with a natural spacing of 3 bp. These results demonstrate that transposon circles can act as intermediates in IS911 transposition and provide evidence for collaboration between the two major IS911-encoded proteins, OrfA and OrfAB.

IS911-mediated intramolecular transposition is naturally temperature sensitive.

It is shown here that the bacterial insertion sequence IS911 exhibits a temperature-sensitive transposition phenotype. Previous results have demonstrated that elevated levels of the IS911 transposase OrfAB generate significant quantities of a figure-eight form, created by cleavage and circularization of one of the transposon strands, and of an excised circular form, in which both transposon strands have been circularized. We show here that the level of both types of molecule observed in vivo was greatly reduced at 42 degrees C compared with 37 degrees C. On the other hand, reducing the temperature to 30 degrees C resulted in a significant increase in production. Transposition activity at this temperature was sufficiently high to permit detection in vivo of an excised circular form of a defective single IS911 chromosomal copy when OrfAB is supplied in trans. A similar temperature-activity profile is observed for a cell-free reaction that uses partially purified OrfAB and generates the figure-eight form uniquely. Moreover, two point mutants of OrfAB were obtained, which render the reactions partially temperature resistant both in vivo and in vitro. These results suggest that some property of transposase itself is sensitive to elevated temperatures.

Assembly of a strong promoter following IS911 circularization and the role of circles in transposition.

When supplied with high levels of the IS911-encoded transposase, IS911-based transposons can excise as circles in which the right and left terminal inverted repeats are abutted. Formation of the circle junction is shown here to create a promoter, p(junc), which is significantly stronger than the indigenous promoter, pIRL, and is also capable of driving expression of the IS911 transposition proteins. High transposase expression from the circular transposon may promote use of the circle as an integration substrate. The results demonstrate that IS911 circles are highly efficient substrates for insertion into a target molecule in vivo. Insertion leads to the disassembly of p(junc) and thus to a lower level of synthesis of the transposition proteins. The observation that normal levels of IS911 transposition proteins supplied by wild-type copies of IS911 are also capable of generating transposon circles, albeit at a low level, reinforces the idea that the transposon circles might form part of the natural transposition cycle of IS911. These observations form the elements of a feedback control mechanism and have been incorporated into a model describing one possible pathway of IS911 transposition.

IS911-mediated transpositional recombination in vitro.

A cell-free system is described that accomplishes an unusual type of transposition/recombination involving the bacterial insertion sequence IS911. Using a plasmid substrate carrying a derivative of IS911, we show that bacterial cell extracts enriched for the IS911 transposase, OrfAB, carry out a single-strand cleavage and transfer reaction. This results in the formation of a figure-eight molecule in which a single strand of the element is circularized, faithfully reproducing an event previously detected in vivo. Moreover, when presented with a figure-eight substrate, OrfAB is capable of "reversing" strand transfer. This activity is equivalent to the "disintegration" reaction carried out by retroviral integrases. We demonstrate that the domain of OrfAB responsible for this catalytic activity is located in the carboxy-terminal region of the protein, since a peptide composed of this region retains disintegration activity. The OrfAB-mediated excision-circularization process previously observed in vivo was proposed to proceed via a figure-eight intermediate by circularization of the second transposon strand. The absence of transposon circles in cell-free reaction suggests either that the figure-eight form is not an intermediate or that additional host factors are required that are eliminated from the cell extract. Two types of model, replicative and non-replicative, are discussed to explain how the figure-eight molecule could be processed into the transposon circle.

An in vivo transposase-catalyzed single-stranded DNA circularization reaction.

Expression of the bacterial insertion sequence IS911 transposase in vivo leads to excision and circularization of IS911-based transposons. We show here that transposase produces an unusual molecular form generated by single-strand cleavage, transfer, and ligation of one end of the element to the opposite end. When the transposon is carried by a circular plasmid, this results in the formation of a "figure-eight" molecule in which a single strand of the transposon is circularized while the corresponding strand of the vector backbone retains a single-strand interruption at this position. The results show that a 3' end of the transposon is transferred to the opposite target end. Transposase is therefore capable of introducing single-strand cleavages at the ends of the element, an activity similar to that of retroviral integrases with which it shares significant similarities in amino acid sequence. Kinetic studies demonstrate that the figure-eight accumulates earlier than transposon circles after transposase induction and disappears before circles after inhibition of transposase expression, raising the possibility that the figure-eight molecules are precursors to the circles. Therefore, IS911 excision as a circle may not occur by double-strand cleavage leading to its prior separation from the vector backbone in a linear form but could proceed by consecutive circularization of each strand.

Bacterial transposases and retroviral integrases.

Transposable genetic elements have adopted two major strategies for their displacement from one site to another within and between genomes. One involves passage through an RNA intermediate prior to synthesis of a DNA copy while the other is limited uniquely to DNA intermediates. For both types of element, recombination reactions involved in integration are carried out by element-specific enzymes. These are called transposases in the case of DNA elements and integrases in the case of the best-characterized RNA elements, the retroviruses and retrotransposons. In spite of major differences between these two transposition strategies, one step in the process, that of insertion, appears to be chemically identical. Current evidence suggests that the similarities in integration mechanism are reflected in amino acid sequence similarities between the integrases and many transposases. These similarities are particularly marked in a region which is thought to form part of the active site, namely the DDE motif. In the light of these relationships, we attempt here to compare mechanistic aspects of retroviral integration with transposition of DNA elements and to summarize current understanding of the functional organization of integrases and transposases.

One-ended insertion of IS911.

An apparently nonreplicative integration reaction mediated by the insertion sequence IS911 has been analyzed. It is shown to involve the right-end inverted repeat (IRR) of the element and sequences in the flanking vector DNA. The flanking sequences appear to behave as a surrogate IS911 end, since integration is greatly reduced when limited similarities with IRR are eliminated by site-directed mutagenesis. Data are presented which suggest that the activity of the IRR junction results from the proximity of the transposase gene and may therefore reflect preferential transposase recognition of IRR in cis.

Transposase-induced excision and circularization of the bacterial insertion sequence IS911.

We have investigated the role of three IS911-specified proteins in transposition in vivo: the products of the upstream (OrfA) and downstream (OrfB) open reading frames, and a transframe protein (OrfAB) produced by -1 translational frameshifting between orfA and orfB. The production of OrfAB alone is shown to lead both to excision and to circularization of the element and to be sufficient for intermolecular transposition into a plasmid target. Simultaneous and independent production of OrfA is shown to stimulate OrfAB-mediated intermolecular transposition while greatly reducing the appearance of transposon circles. We have not been able to detect a role for OrfB. Although under certain conditions, the vector plasmid undergoes precise resealing after IS911 excision, the data suggest that this is not normally the case and that the donor plasmid is not generally conserved. The use of IS911 derivatives carrying mutations in the terminal 2 bp suggested that circle formation represents a site-specific intramolecular transposition event. We present a model which explains both intra- and intermolecular transposition events in terms of a single reaction mechanism of the 'cut and paste' type.

Programmed translational frameshifting and initiation at an AUU codon in gene expression of bacterial insertion sequence IS911.

The proteins expressed by insertion sequence IS911, a member of the widespread IS3 family of elements, have been analyzed. The results indicate that three major species are produced from two consecutive reading frames. A protein of Mr 11,500, ORFA, is synthesized from an upstream reading frame. A larger protein, ORFAB, uses the same initiation codon and is produced by a -1 programmed translational frameshift between orfA and a downstream frame, orfB, whose amino acid sequence shows significant homology with retroviral integrase proteins. The orfB frame is also expressed independently in two alternative forms: the first uses a rare AUU initiation codon in the orfB phase whereas the second appears to initiate in the orfA phase and is produced by a -1 frameshift mechanism similar to that used in ORFAB expression. A specific IS911 integration reaction using a minimal active junction composed of 51 base-pairs of the right inverted repeat and a flanking phase lambda sequence resembling a second end in inverted orientation has been developed to analyze the functions of these proteins by transcomplementation in vivo. The orfA and orfB frames are shown to be essential and production of ORFAB is shown to stimulate integration in this system, suggesting that this fusion protein is the IS911 transposase.

Functional similarities between retroviruses and the IS3 family of bacterial insertion sequences?

Members of the IS3 family of insertion sequences are found in a wide range of bacteria. At least 10 members of this family carry two major open reading frames: a small upstream frame (0 phase), and a longer downstream frame in the -1 phase. The downstream frame shows significant similarity at the amino acid level. A highly conserved region of this frame also exhibits notable similarity with a region of the integrase (endonuclease) domain of retroviruses. Although the overall transposition mechanism of the insertion sequence and retroviral elements is certainly different, the two groups may share additional common features, including a -1 frameshift resulting in the production of a fusion protein.

The regulatory role of the IS1-encoded InsA protein in transposition.

We show here that the protein InsA, which is encoded by IS1 and binds specifically to the terminal inverted repeats of this insertion sequence, negatively regulates IS1 transposition activity. We demonstrate that it inhibits both IS1-mediated cointegrate formation and transposition of a synthetic IS1-based transposon ('omegon'; omega-on). These results also indicate that the omega-on which does not itself encode IS1 transposition functions can be complemented in trans, presumably by the copies of IS1 resident in the Escherichia coli chromosome. Using insA-lacZ gene fusions, we show that at least part of this effect can be explained by the ability of InsA to repress expression of IS1-encoded genes both in cis or in trans. The experiments involving omega-on transposition raise the possibility that InsA inhibits transposition directly by competition with the transposase for their cognate site within the ends of IS1.