Enhanced osteointegration and osteogenesis of osteoblast cells by laser-induced surface modification of Ti implants.

Dental and orthopedic implants have become routine medical technologies for tooth replacement and bone fixation. Despite significant progress in implantology, achieving sufficient osseointegration remains a challenge, often leading to implant failure over the long term. Nanotechnology offers the potential to mimic the natural patterns of living tissues, providing a promising platform for tissue engineering and implant surface design. Among the various methods for developing nanostructures, High-Regular Laser-Induced Periodic Surface Structures (HR-LIPSS) techniques stand out for their ability to fabricate highly ordered nanostructures with excellent long-range repeatability and production efficiency. In this study, we utilized an innovative technical approach to generate traditional laser-induced superficial LIPSS nanostructures, followed by detailed surface analysis using classical microscopy and physicochemical methods. Our findings demonstrate for the first time that nanostructured LIPSS surfaces can significantly enhance cell adhesion and proliferation while providing an optimal environment for cell metabolism. Given the high reproducibility, low cost, and potential of HR-LIPSS techniques to support cell growth and differentiation, this novel technology has the potential to impact both the industrial development of new implants and clinical outcomes after implantation.

Uncovering the Lowest Thickness Limit for Room-Temperature Ferromagnetism of Cr1.6Te2.

Metallic ferromagnetic transition metal dichalcogenides have emerged as important building blocks for scalable magnetic and memory applications. Downscaling such systems to the ultrathin limit is critical to integrate them into technology. Here, we achieved layer-by-layer control over the transition metal dichalcogenide Cr1.6Te2 by using pulsed laser deposition, and we uncovered the minimum critical thickness above which room-temperature magnetic order is maintained. The electronic and magnetic structures are explored experimentally and theoretically, and it is shown that the films exhibit strong in-plane magnetic anisotropy as a consequence of large spin-orbit effects. Our study elucidates both magnetic and electronic properties of Cr1.6Te2 and corroborates the importance of intercalation to tune the magnetic properties of nanoscale materials' architectures.

On the origin of the improved hydrogen evolution reaction in Mn- and Co-doped MoS2.

In the field of hydrogen production, MoS2 demonstrates good catalytic properties for the hydrogen evolution reaction (HER) which improve when doped with metal cations. However, while the role of sulfur atoms as active sites in the HER is largely reported, the role of metal atoms (i.e. molybdenum or the dopant cations) has yet to be studied in depth. To understand the role of the metal dopant, we study MoS2 thin films doped with Co and Mn ions. We identify the contribution of the electronic bands of the Mn and Co dopants to the integral valence band of the material using in situ resonant photoemission measurements. We demonstrate that Mn and Co dopants act differently: Mn doping favors the shift of the S-Mo hybridized band towards the Fermi level, while in the case of Co doping it is the less hybridized Co band that shifts closer to the Fermi level. Doping with Mn increases the effectiveness of S as the active site, thus improving the HER, while doping with Co introduces the metallic site of Co as the active site, which is less effective in improving HER properties. We therefore clarify the role of the dopant cation in the electronic structure determining the active site for hydrogen adsorption/desorption. Our results pave the way for the design of efficient materials for hydrogen production via the doping route, which can be extended to different catalytic reactions in the field of energy applications.

Signatures of a surface spin-orbital chiral metal.

The relation between crystal symmetries, electron correlations and electronic structure steers the formation of a large array of unconventional phases of matter, including magneto-electric loop currents and chiral magnetism1-6. The detection of such hidden orders is an important goal in condensed-matter physics. However, until now, non-standard forms of magnetism with chiral electronic ordering have been difficult to detect experimentally7. Here we develop a theory for symmetry-broken chiral ground states and propose a methodology based on circularly polarized, spin-selective, angular-resolved photoelectron spectroscopy to study them. We use the archetypal quantum material Sr2RuO4 and reveal spectroscopic signatures that, despite being subtle, can be reconciled with the formation of spin-orbital chiral currents at the surface of the material8-10. As we shed light on these chiral regimes, our findings pave the way for a deeper understanding of ordering phenomena and unconventional magnetism.

Evidence of Temperature-Dependent Interplay between Spin and Orbital Moment in van der Waals Ferromagnet VI3.

van der Waals materials provide a versatile toolbox for the emergence of new quantum phenomena and fabrication of functional heterostructures. Among them, the trihalide VI3 stands out for its unique magnetic and structural landscape. Here we investigate the spin and orbital magnetic degrees of freedom in the layered ferromagnet VI3 by means of temperature-dependent X-ray absorption spectroscopy and X-ray magnetic circular and linear dichroism. We detect localized electronic states and reduced magnetic dimensionality, due to electronic correlations. We furthermore provide experimental evidence of (a) an unquenched orbital magnetic moment (up to 0.66(7) µB/V atom) in the ferromagnetic state and (b) an instability of the orbital moment in the proximity of the spin reorientation transition. Our results support a coherent picture where electronic correlations give rise to a strong magnetic anisotropy and a large orbital moment and establish VI3 as a prime candidate for the study of orbital quantum effects.

Unraveling the optoelectronic properties of CoSbx intrinsic selective solar absorber towards high-temperature surfaces.

The combination of the ability to absorb most of the solar radiation and simultaneously suppress infrared re-radiation allows selective solar absorbers (SSAs) to maximize solar energy to heat conversion, which is critical to several advanced applications. The intrinsic spectral selective materials are rare in nature and only a few demonstrated complete solar absorption. Typically, intrinsic materials exhibit high performances when integrated into complex multilayered solar absorber systems due to their limited spectral selectivity and solar absorption. In this study, we propose CoSbx (2 < x < 3) as a new exceptionally efficient SSA. Here we demonstrate that the low bandgap nature of CoSbx endows broadband solar absorption (0.96) over the solar spectral range and simultaneous low emissivity (0.18) in the mid-infrared region, resulting in a remarkable intrinsic spectral solar selectivity of 5.3. Under 1 sun illumination, the heat concentrates on the surface of the CoSbx thin film, and an impressive temperature of 101.7 °C is reached, demonstrating the highest value among reported intrinsic SSAs. Furthermore, the CoSbx was tested for solar water evaporation achieving an evaporation rate of 1.4 kg m-2 h-1. This study could expand the use of narrow bandgap semiconductors as efficient intrinsic SSAs with high surface temperatures in solar applications.

Artificial Aging of Thin Films of the Indium-Free Transparent Conducting Oxide SrVO3.

SrVO3 (SVO) is a prospective candidate to replace the conventional indium tin oxide (ITO) among the new generation of transparent conducting oxide (TCO) materials. In this study, the structural, electrical, and optical properties of SVO thin films, both epitaxial and polycrystalline, are determined during and after heat treatments in the 150-250 °C range and under ambient environment in order to explore the chemical stability of this material. The use of these relatively low temperatures speeds up the natural aging of the films and allows following the evolution of their related properties. The combination of techniques rather sensitive to the film surface and of techniques sampling the film volume will emphasize the presence of a surface oxidation evolving in time at low annealing temperatures, whereas the perovskite phase is destroyed throughout the film for treatments above 200 °C. The present study is designed to understand the thermal degradation and long-term stability issues of vanadate-based TCOs and to identify technologically viable solutions for the application of this group as new TCOs.

Influence of Orbital Character on the Ground State Electronic Properties in the van Der Waals Transition Metal Iodides VI3 and CrI3.

Two-dimensional van der Waals magnetic semiconductors display emergent chemical and physical properties and hold promise for novel optical, electronic and magnetic "few-layers" functionalities. Transition-metal iodides such as CrI3 and VI3 are relevant for future electronic and spintronic applications; however, detailed experimental information on their ground state electronic properties is lacking often due to their challenging chemical environment. By combining X-ray electron spectroscopies and first-principles calculations, we report a complete determination of CrI3 and VI3 electronic ground states. We show that the transition metal-induced orbital filling drives the stabilization of distinct electronic phases: a wide bandgap in CrI3 and a Mott insulating state in VI3. Comparison of surface-sensitive (angular-resolved photoemission spectroscopy) and bulk-sensitive (X-ray absorption spectroscopy) measurements in VI3 reveals a surface-only V2+ oxidation state, suggesting that ground state electronic properties are strongly influenced by dimensionality effects. Our results have direct implications in band engineering and layer-dependent properties of two-dimensional systems.

Disentangling Structural and Electronic Properties in V2O3 Thin Films: A Genuine Nonsymmetry Breaking Mott Transition.

Phase transitions are key in determining and controlling the quantum properties of correlated materials. Here, by using the combination of material synthesis and photoelectron spectroscopy, we demonstrate a genuine Mott transition undressed of any symmetry breaking side effects in the thin films of V2O3. In particular and in contrast with the bulk V2O3, we unveil the purely electronic dynamics approaching the metal-insulator transition, disentangled from the structural transformation that is prevented by the residual substrate-induced strain. On approaching the transition, the spectral signal evolves slowly over a wide temperature range, the Fermi wave-vector does not change, and the critical temperature is lower than the one reported for the bulk. Our findings are fundamental in demonstrating the universal benchmarks of a genuine nonsymmetry breaking Mott transition, extendable to a large array of correlated quantum systems, and hold promise of exploiting the metal-insulator transition by implementing V2O3 thin films in devices.

Electronic Properties of Fully Strained La1-x Sr x MnO3 Thin Films Grown by Molecular Beam Epitaxy (0.15 ≤ x ≤ 0.45).

The structural, electronic, and magnetic properties of Sr-hole-doped epitaxial La1-x Sr x MnO3 (0.15 ≤ x ≤ 0.45) thin films deposited using the molecular beam epitaxy technique on 4° vicinal STO (001) substrates are probed by the combination of X-ray diffraction and various synchrotron-based spectroscopy techniques. The structural characterizations evidence a significant shift in the LSMO (002) peak to the higher diffraction angles owing to the increase in Sr doping concentrations in thin films. The nature of the LSMO Mn mixed-valence state was estimated from X-ray photoemission spectroscopy together with the relative changes in the Mn L2,3 edges observed in X-ray absorption spectroscopy (XAS), both strongly affected by doping. CTM4XAS simulations at the XAS Mn L2,3 edges reveal the combination of epitaxial strain, and different MnO6 crystal field splitting give rise to a peak at ∼641 eV. The observed changes in the occupancy of the eg and the t2g orbitals as well as their binding energy positions toward the Fermi level with hole doping are discussed. The room-temperature magnetic properties were probed at the end by circular dichroism.

ZnO Thin Films Growth Optimization for Piezoelectric Application.

The piezoelectric response of ZnO thin films in heterostructure-based devices is strictly related to their structure and morphology. We optimize the fabrication of piezoelectric ZnO to reduce its surface roughness, improving the crystalline quality, taking into consideration the role of the metal electrode underneath. The role of thermal treatments, as well as sputtering gas composition, is investigated by means of atomic force microscopy and x-ray diffraction. The results show an optimal reduction in surface roughness and at the same time a good crystalline quality when 75% O2 is introduced in the sputtering gas and deposition is performed between room temperature and 573 K. Subsequent annealing at 773 K further improves the film quality. The introduction of Ti or Pt as bottom electrode maintains a good surface and crystalline quality. By means of piezoelectric force microscope, we prove a piezoelectric response of the film in accordance with the literature, in spite of the low ZnO thickness and the reduced grain size, with a unipolar orientation and homogenous displacement when deposited on Ti electrode.

Magnetoelectric Coupling at the Ni/Hf0.5Zr0.5O2 Interface.

Composite multiferroics containing ferroelectric and ferromagnetic components often have much larger magnetoelectric coupling compared to their single-phase counterparts. Doped or alloyed HfO2-based ferroelectrics may serve as a promising component in composite multiferroic structures potentially feasible for technological applications. Recently, a strong charge-mediated magnetoelectric coupling at the Ni/HfO2 interface has been predicted using density functional theory calculations. Here, we report on the experimental evidence of such magnetoelectric coupling at the Ni/Hf0.5Zr0.5O2(HZO) interface. Using a combination of operando XAS/XMCD and HAXPES/MCDAD techniques, we probe element-selectively the local magnetic properties at the Ni/HZO interface in functional Au/Co/Ni/HZO/W capacitors and demonstrate clear evidence of the ferroelectric polarization effect on the magnetic response of a nanometer-thick Ni marker layer. The observed magnetoelectric effect and the electronic band lineup of the Ni/HZO interface are interpreted based on the results of our theoretical modeling. It elucidates the critical role of an ultrathin NiO interlayer, which controls the sign of the magnetoelectric effect as well as provides a realistic band offset at the Ni/HZO interface, in agreement with the experiment. Our results hold promise for the use of ferroelectric HfO2-based composite multiferroics for the design of multifunctional devices compatible with modern semiconductor technology.

Stabilization of an Enantiopure Sub-monolayer of Helicene Radical Cations on a Au(111) Surface through Noncovalent Interactions.

In the past few years, the chirality and magnetism of molecules have received notable interest for the development of novel molecular devices. Chiral helicenes combine both these properties, and thus their nanostructuration is the first step toward developing new multifunctional devices. Here, we present a novel strategy to deposit a sub-monolayer of enantiopure thia[4]helicene radical cations on a pre-functionalized Au(111) substrate. This approach results in both the paramagnetic character and the chemical structure of these molecules being maintained at the nanoscale, as demonstrated by in-house characterizations. Furthermore, synchrotron-based X-ray natural circular dichroism confirmed that the handedness of the thia[4]helicene is preserved on the surface.

Epitaxial growth of TbFe2 on piezoelectric LiNbO3 Z-cut.

The strongly magnetostrictive TbFe2 compound has been epitaxially grown on Z-cut Lithium Niobate (LiNbO3) substrates after the deposition of various buffer layers (Mo, Ti and Ti/Mo). Detailed and combined RHEED and x-ray analysis permitted to unravel the in-plane and relative orientation relationships (OR) of the different materials in the system. Despite the use of different templates with different structural orders, similar final OR are eventually found between the piezoelectric substrate and the magnetic layer. The structural and magnetic properties are analyzed in order to get a TbFe2 layer of optimum quality to build a magnetostrictive/piezoelectric hybrid system with efficient strain mediated coupling. Such systems are of interest for the development of magnetic sensors as well as for the electric control of magnetization.

Epitaxial growth of magnetostrictive TbFe2 films on piezoelectric LiNbO3.

The TbFe2 compound has been deposited by molecular beam epitaxy on lithium niobate (LN) substrates with different orientations (LN Z-, 128 Y- and 41 Y-cuts). Despite the challenging growth on these unconventional substrates, crystalline TbFe2 films (as a single orientated domain or with a limited number of orientations) of reasonable structural quality could be obtained after the deposition of a Mo buffer layer. Detailed and combined RHEED and x-ray analysis permitted to unravel the complex Mo and TbFe2 crystal orientations and to reveal common 3D orientation relationships between the different lattices, whatever the initial LN cut. The magnetic properties and especially the magnetic anisotropy have been investigated in taking magnetocrystalline, magnetoelastic and magnetostatic contributions into account. These promising results on the epitaxial growth of hybrid piezoelectric/magnetostrictive crystalline system constitute an important step towards the control of magnetization via electrically generated static and/or dynamic strains, and towards the development of magnetic sensors based on surface acoustic wave devices.