Method development and validation for the simultaneous determination of organochlorine and organophosphorus pesticides in a complex sediment matrix.

The Xochimilco area in the southeastern part of Mexico City has a variety of socioeconomic activities, such as periurban agriculture, which is of great importance in the Mexico City metropolitan area. Pesticides are used extensively, some being legal, mostly chlorpyrifos and malathion, and some illegal, mostly DDT. Sediments are a common sink for pesticides in aquatic systems near agricultural areas, and Xochimilco sediments have a complex composition with high contents of organic matter and clay that are ideal adsorption sites for organochlorine (OC) and organophosphorus (OP) pesticides. Therefore, it is important to have a quick, affordable, and reliable method to determine these pesticides. Conventional methods for the determination of OC and OP pesticides are long, laborious, and costly owing to the high volume of solvents and adsorbents. The present study developed and validated a method for determining 18 OC and five OP pesticides in sediments with high organic and clay contents. In contrast with other methods described in the literature, this method allows isolation of the 23 pesticides with a 12 min microwave-assisted extraction (MAE) and one-step cleanup of pesticides. The method developed is a simpler, time-saving procedure that uses only 3.5 g of dry sediment. The use of MAE eliminates excessive handling and the possible loss of analytes. It was shown that the use of LC-Si cartridges with hexane-ethyl acetate (75+25, v/v) in the cleanup procedure recovered all pesticides with rates between 70 and 120%. The validation parameters demonstrated good performance of the method, with intermediate precision ranging from 7.3 to 17.0%, HorRat indexes all below 0.5, and tests of accuracy with the 23 pesticides at three concentration levels demonstrating recoveries ranging from 74 to 114% and RSDs from 3.3 to 12.7%.

Metal distribution in coral reef complex Cayo Arcas in the Gulf of Mexico.

This study evaluated the spatial and temporal distribution of metals in the coral reef system Cayos Arcas and Triangulos in the Campeche Bank region, off the Yucatan peninsula in Mexico. No information has been generated before for the incorporation of natural and non-natural occurring metals, some of which are possibly endowed by the oil marine station Cayo Arcas. The multivariate exploratory study of the metals on the coral skeletons, showed the formation of two distinct groups. The metals that have the highest influence on the differentiation of the groups are the metals that are natural constituents of the coral skeletons, in particular Sr can explain much of the differences between the groups, and to a much lesser extent are the metals that could be indicators of pollution. This differentiation suggests that, in our case, the environment around the corals has a higher impact than the non-naturally occurring metals (and possible indicators of pollution). The two groups formed corresponded to: the coral cores influenced by open sea variables and the coral cores in the inner part of the keys which is less exposed to open sea variables. A chronological study was made to two samples that had the longest coral section and were situated in two clearly distinctive zones: an exposed surface subjected to high wave forces and another that was less exposed. Ni and Zn show an accumulation trend in both coral samples, while Ba showed an increase in incorporation around 1980 when the Cayo Arcas oil marine station was constructed.

Assesment of trace elements and organic pollutants from a marine oil complex into the coral reef system of Cayo Arcas, Mexico.

Possible contaminants produced by the Petroleos Mexicanos (PEMEX) marine oil complex in the vicinity of the Cayo Arcas (Mexico) coral reef ecosystem were evaluated by analyzing sediments and sea water for hydrocarbons and metal elements. We found that the concentrations of aliphatic hydrocarbons in the sea water were generally low, with the highest values detected near the oil station; the concentration of polycyclic aromatic hydrocarbons (PAHs) was generally below the detection limit. The hydrocarbons found in the sediments seem to have a pyrogenic origin, and were probably produced by marine traffic in the study area. The total PAH concentration did not exceed the NOAA criteria, although levels of some individual PAHs did. The only metal detected in the sea water at high concentrations was nickel. The Ni/V ratio in the sediments indicates the contribution of crude oil to the system. The high content of Ni and Zn was attributed to the ballast waters from the oil tankers that load at the station's monobuoys. The presence of fine sediments that commonly originate from terrestrial ecosystems supported this assumption.

Sequential extractions of selenium soils from Stewart Lake: total selenium and speciation measurements with ICP-MS detection.

Different techniques have been employed in order to evaluate the most efficient procedure for the extraction of selenium from soil as required for speciation. Selenium contaminated sediments from Stewart Lake Wetland, California were used. A strong acid mineralization of the samples gives quantitative total selenium, which is then used to estimate recoveries for the milder extraction methods. The different extraction methodologies involve the sequential use of water, buffer (phosphate, pH 7) and either acid solution (e.g. HNO3 or HCl) or basic solutions (e.g. ammonium acetate, NaOH or TMAH). Pyrophosphate extraction was also evaluated and showed that selenium was not associated with humic acids. The extractants were subsequently analyzed by size exclusion chromatography (SEC) with UV (254 and 400 nm) and on-line ICP-MS detection; anion exchange chromatography, and ion-pair reversed phase chromatography with ICP-MS detection. For sequential extractions the extraction efficiencies showed that the basic extractions were more efficient than the acidic. The difference between the acidic and the basic extraction efficiency is carried to the sulfite extraction, suggesting that whatever is not extracted by the acid is subsequently extracted by the sulfite. The species identified with the different chromatographies were selenate, selenite, elemental selenium and some organic selenium.

Elemental speciation by chromatographic separation with inductively coupled plasma mass spectrometry detection.

Separation techniques coupled to inductively coupled plasma mass spectrometry (ICP-MS) is reviewed. ICP-MS technique is described briefly. Coupling of the different separation techniques are described, together with the most common applications used for each technique that has been described in the literature. An overview for the future of separation techniques coupled to ICP-MS with regard to elemental speciation is discussed.

Characterization of selenium species in Brazil nuts by HPLC-ICP-MS and ES-MS.

Brazil nuts have been classified as the foodstuffs that contain the highest level of unadulterated selenium, an essential trace element that appears to prevent cancer. To date, characterization of the selenium species in brazil nuts has not yet been investigated. In this work, various sample preparation approaches, including microwave extractions and enzymatic treatments, are examined with the goal of species preservation and subsequent selenium speciation; of these approaches, an enzymatic treatment with Proteinase K proved most effective. High-performance liquid chromatography (HPLC) separation strategies and inductively coupled plasma mass spectrometry (ICP-MS) detection schemes will also be presented. Extracts are evaluated against available standards for the commercially obtainable seleno-amino acids, selenomethionine (SeMet), selenoethionine (SeEt), and selenocystine (SeCys); selenomethionine was demonstrated to be the most abundant of these seleno-amino acids. Further characterization of unidentified selenium-containing peaks is attempted by the employment of several procedures, including electrospray-mass spectrometry (ES-MS). A peptide structure was identified; however, this was considered a tentative proposal due to the large background produced by the extremely complicated brazil nut matrix.

Trace element determination in vitamin E using ICP-MS.

Vitamin E supplements are either isolated from plants sources or prepared synthetically. Isolation from plants includes eight different tocopherol structures. Vitamin E synthesis includes seven different stereoisomers, which involves the use of several catalysts that may lead to trace element contamination in the vitamin. The use of ICP-MS is an ideal technique for detecting these trace elements. However, the oily nature of the samples requires the development of a sample preparation methodology. This study was done upon the request of synthetic vitamin E manufacturers to test the trace metal purity of their samples. In this work, the comparison of an acid microwave digestion and emulsion preparation is discussed. Cromium, nickel, tin and lead were found in the synthetic vitamin E analyzed and 200, 60, 9 and 45 ppb were the concentrations found respectively for these elements. Digesting the samples gives slightly lower detection limits compared to the emulsion preparation.

Initial studies of selenium speciation in Brassica juncea by LC with ICPMS and ES-MS detection: an approach for phytoremediation studies.

Various Brassica species accumulate Se into the thousands of ppm. This suggests some of them as candidates for Se phytoremediation. Brassica juncea (Indian mustard) was used to accumulate selenium by growing with sodium selenite as the selenium source under hydroponic conditions resulting in Se accumulation of up to hundreds of ppm in various parts of the plant. To date, few selenium speciation studies have been done in plants, with most studies reporting total selenium concentration in various parts of the plant. Se species extraction was evaluated by several digestion/extraction procedures, including the use of HCl, Tris-HCl buffer, and enzymatic hydrolysis (using proteinase K and protease XIV). The best extraction was obtained with proteinase K (extracting approximately 75% of the total Se present in the plant). Some of the species produced by the plant, such as selenomethionine, can be identified at ppb levels by RP-HPLC-ICPMS, since standards are readily available. Others needed to be further characterized by ES-MS. Enzymatic hydrolysis releases mostly Se-methionine from juncea leaves, although other Se-containing species can also be observed by HPLC-ICPMS. In this initial study, the possible identification (by ES-MS) of a small chromatographic peak containing a Se-S bridged seleno amino acid with a structure similar to cystine is suggested.