RESUMO
Superbug infections are currently one of the biggest global health problems in our society. Herein, we report the design of a plasmonic gold nanoparticle (GNP)-decorated WO3 nanowire-based heterojunction for the proficient usage of sunlight-based renewable energy to inactivate 100% superbugs via photothermally boosted photocatalytic action. Additionally, a synergistic photothermal and photocatalytic approach has been used for sunlight-driven complete eradication of carbapenem-resistant Enterobacteriaceae Escherichia coli (CRE E. coli) and methicillin-resistant Staphylococcus aureus (MRSA) superbugs. Interestingly, photocatalytic activity of methylene blue (MB) dye degradation in the presence of 670 nm near-infrared light shows that photothermally boosted photocatalytic performance is much superior to that of only a photocatalytic or photothermal process. The observed higher photocatalytic performance for the heterojunction is because the plasmonic GNP enhanced the absorption capability at 670 nm and increased the temperature of the photocatalyst surface, which reduces the activation energy of the degradation reaction. Similarly, sunlight-driven photocatalytic experiments show 100% degradation of MB after 60 min of sunlight irradiation. Moreover, sunlight-based photocatalytic inactivation of MRSA and CRE E. coli experiments show 100% inactivation after 60 min of light irradiation.
RESUMO
This paper investigates the potential of graphene-coated sand (GCS) as an advanced filtration medium for improving water quality and mitigating chemicals of emerging concern (CECs) in treated municipal wastewater, aiming to enhance water reuse. The study utilizes three types of sand (Ottawa, masonry, and concrete) coated with graphene to assess the impact of surface morphology, particle shape, and chemical composition on coating and filtration efficiency. Additionally, sand coated with graphene and activated graphene coated sand were both tested to understand the effect of coating and activation on the filtration process. The materials were characterized using digital microscopy, Raman spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction analysis. The material's efficiency in removing turbidity, nutrients, chemical oxygen demand (COD), bacteria, and specific CECs (Aciclovir, Diatrizoic acid, Levodopa, Miconazole, Carbamazepine, Diphenhydramine, Irbesartan, Lidocaine, Losartan, and Sulfamethoxazole) was studied. Our findings indicate that GCS significantly improves water quality parameters, with notable efficiency in removing turbidity, COD (14.1 % and 69.1 % removal), and bacterial contaminants (64.9 % and 99.9 % removal). The study also highlights the material's capacity to remove challenging CECs like Sulfamethoxazole (up to 80 % removal) and Diphenhydramine (up to 90 % removal), showcasing its potential as a sustainable solution for water reuse applications. This research contributes to the field by providing a comprehensive evaluation of GCS in water treatment, suggesting its potential for removing CECs from treated municipal wastewater.
RESUMO
Every year, a huge amount of lethal compounds, such as synthetic dyes, pesticides, pharmaceuticals, hydrocarbons, etc. are mass produced worldwide, which negatively affect soil, air, and water quality. At present, pesticides are used very frequently to meet the requirements of modernized agriculture. The Food and Agriculture Organization of the United Nations (FAO) estimates that food production will increase by 80% by 2050 to keep up with the growing population, consequently pesticides will continue to play a role in agriculture. However, improper handling of these highly persistent chemicals leads to pollution of the environment and accumulation in food chain. These effects necessitate the development of technologies to eliminate or degrade these pollutants. Degradation of these compounds by physical and chemical processes is expensive and usually results in secondary compounds with higher toxicity. The biological strategies proposed for the degradation of these compounds are both cost-effective and eco-friendly. Microbes play an imperative role in the degradation of xenobiotic compounds that have toxic effects on the environment. This review on the fate of xenobiotic compounds in the environment presents cutting-edge insights and novel contributions in different fields. Microbial community dynamics in water bodies, genetic modification for enhanced pesticide degradation and the use of fungi for pharmaceutical removal, white-rot fungi's versatile ligninolytic enzymes and biodegradation potential are highlighted. Here we emphasize the factors influencing bioremediation, such as microbial interactions and carbon catabolism repression, along with a nuanced view of challenges and limitations. Overall, this review provides a comprehensive perspective on the bioremediation strategies.
RESUMO
Chalcogel represents a unique class of meso- to macroporous nanomaterials that offer applications in energy and environmental pursuits. Here, the synthesis of an ion-exchangeable amorphous chalcogel using a nominal composition of K2CoMo2S10 (KCMS) at room temperature is reported. Synchrotron X-ray pair distribution function (PDF), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) reveal a plausible local structure of KCMS gel consisting of Mo5+ 2 and Mo4+ 3 clusters in the vicinity of di/polysulfides which are covalently linked by Co2+ ions. The ionically bound K+ ions remain in the percolating pores of the Co-Mo-S covalent network. XANES of Co K-edge shows multiple electronic transitions, including quadrupole (1sâ3d), shakedown (1sâ4p + MLCT), and dipole allowed 1sâ4p transitions. Remarkably, despite a lack of regular channels as in some crystalline solids, the amorphous KCMS gel shows ion-exchange properties with UO2 2+ ions. Additionally, it also presents surface sorption via [SââââUO2 2+] covalent interactions. Overall, this study underscores the synthesis of quaternary chalcogels incorporating alkali metals and their potential to advance separation science for cations and oxo-cationic species by integrating a synergy of surface sorption and ion-exchange.
RESUMO
Although water is essential for life, as per the United Nations, around 2 billion people in this world lack access to safely managed drinking water services at home. Herein we report the development of a two-dimensional (2D) fluorinated graphene oxide (FGO) and polyethylenimine (PEI) based three-dimensional (3D) porous nanoplatform for the effective removal of polyfluoroalkyl substances (PFAS), pharmaceutical toxins, and waterborne pathogens from contaminated water. Experimental data show that the FGO-PEI based nanoplatform has an estimated adsorption capacity (qm) of â¼219 mg g-1 for perfluorononanoic acid (PFNA) and can be used for 99% removal of several short- and long-chain PFAS. A comparative PFNA capturing study using different types of nanoplatforms indicates that the qm value is in the order FGO-PEI > FGO > GO-PEI, which indicates that fluorophilic, electrostatic, and hydrophobic interactions play important roles for the removal of PFAS. Reported data show that the FGO-PEI based nanoplatform has a capability for 100% removal of moxifloxacin antibiotics with an estimated qm of â¼299 mg g-1. Furthermore, because the pore size of the nanoplatform is much smaller than the size of pathogens, it has a capability for 100% removal of Salmonella and Escherichia coli from water. Moreover, reported data show around 96% removal of PFAS, pharmaceutical toxins, and pathogens simultaneously from spiked river, lake, and tap water samples using the nanoplatform.
RESUMO
Dielectric capacitors are critical components in electronics and energy storage devices. The polymer-based dielectric capacitors have the advantages of device flexibility, fast charge-discharge rates, low loss, and graceful failure. Elevating the use of polymeric dielectric capacitors for advanced energy applications such as electric vehicles (EVs), however, requires significant enhancement of their energy densities. Here, we report a polymer thin film heterostructure-based capacitor of poly(vinylidene fluoride)/poly(methyl methacrylate) with stratified 2D nanofillers (Mica or h-BN nanosheets) (PVDF/PMMA-2D fillers/PVDF), that shows enhanced permittivity, high dielectric strength, and an ultrahigh energy density of ≈75 J/cm3 with efficiency over 79%. Density functional theory calculations verify the observed permittivity enhancement. This approach of using oriented 2D nanofillers-based polymer heterostructure composites is expected to be versatile for designing high energy density thin film polymeric dielectric capacitors for myriads of applications.
RESUMO
Pseudomonas aeruginosa can utilize various virulence factors necessary for host infection and persistence. These virulence factors include pyocyanin, proteases, exotoxins, 2-heptyl-4-hydroxyquinoline N-oxide (HQNO), phospholipases, and siderophores that enable the bacteria to cause severe infections in immunocompromised individuals. P. aeruginosa falls into the category of nosocomial pathogens that are typically resistant to available antibiotics and therapeutic approaches. P. aeruginosa bio-film formation is a major concern in hospitals because it can cause chronic infection and increase the risk of mortality. Therefore, the development of new strategies to disrupt biofilm formation and improve antibiotic efficacy for the treatment of P. aeruginosa infections is crucial. Anti-biofilm and anti-quorum sensing (QS) activity can be viewed as an anti-virulence approach to control the infectious nature of P. aeruginosa. Inhibition of QS and biofilm formation can be achieved through pharmacological approaches such as phytochemicals and essential oils, which have shown promising results in laboratory studies. A regulatory protein called LasR plays a key role in QS signaling to coordinate gene expression. Designing an antagonist molecule that mimics the natural autoinducer might be the best approach for LasR inhibition. Here we reviewed the mechanism behind antibiotic resistance and alternative approaches to combat the pathogenicity of P. aeruginosa.
Assuntos
Pseudomonas aeruginosa , Transdução de Sinais , Humanos , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Biofilmes , Agregação CelularRESUMO
Due to the lack of early detection before metastasis and failure of current therapy to cure the disease, lung cancer contributes to the highest cancer-related mortality worldwide. Tenascin C (TNC) (+) exosomes promote metastasis, amphiregulin (AREG) (+) exosomes are associated with chemotherapy resistance, and programmed cell death ligand-1 (PDL-1) (+) exosomes are associated with immunotherapy resistance, and they are emerging as biomarkers in clinics. However, due to heterogeneity, rapid isolation and multiplex detection of these exosomes are challenging. Herein, we report the design of an antibody-conjugated multi-color (orange, yellow, and green)-emissive carbon dot (CD)-attached cobalt spinel ferrite (CoFe2O4)-based magneto-luminescent nanoarchitecture for targeted capturing and identification of TNC (+), AREG (+), and PDL-1(+) exosomes selectively and simultaneously from whole blood samples. More importantly, to capture and identify the targeted AREG (+) exosome from an infected whole-blood sample, an anti-AREG antibody-attached green (520 nm)-emissive CD-conjugated CoFe2O4 nanoparticle-based magnetic-green luminescence nanoarchitecture was developed. Similarly, an anti-PDL-1 antibody-attached orange (600 nm)-emissive CDs-based magnetic-orange luminescence nanoarchitecture has been produced to capture and identify the PDL-1 (+) exosome. Furthermore, an anti-TNC antibody-attached yellow (560 nm)-emissive CD-based magnetic-orange luminescent nanoarchitecture has been designed to capture and identify the TNC (+) exosome. Notably, our finding reveals that 100% TNC (+) exosomes can be captured and imaged selectively from an infected blood sample using an anti-TNC antibody-conjugated nanoarchitecture. In addition, 100% AREG (+) exosomes can be captured and imaged selectively using an anti-AREG antibody-conjugated nanoarchitecture. Moreover, 100% PDL-1 (+) exosomes can be captured and imaged selectively using an anti-PDL-1 antibody-conjugated nanoarchitecture. Furthermore, we have demonstrated that a multi-color-emissive nanoarchitecture can be used for capturing and imaging all three exosomes simultaneously.
Assuntos
Exossomos , Neoplasias Pulmonares , Nanopartículas , Humanos , Exossomos/metabolismo , Luminescência , Neoplasias Pulmonares/metabolismo , Biomarcadores/metabolismoRESUMO
Despite black cubic phase α-CsPbI3 nanocrystals having an ideal bandgap of 1.73 eV for optoelectronic applications, the phase transition from α-CsPbI3 to non-perovskite yellow δ-CsPbI3 phase at room temperature remains a major obstacle for commercial applications. Since γ-CsPbI3 is thermodynamically stable with a bandgap of 1.75 eV, which has great potential for photovoltaic applications, herein we report a conceptually new method for the targeted design of phase stable and near unity photoluminescence quantum yield (PLQY) two-dimensional (2D) γ-CsPbI3 nanoplatelets (NPLs) and one-dimensional (1D) γ-CsPbI3 nanobelts (NBs) by wavelength dependent light-induced assembly of CsPbI3 cubic nanocrystals. This article demonstrates for the first time that by varying the excitation wavelengths, one can design air stable desired 2D nanoplatelets or 1D nanobelts selectively. Our experimental finding indicates that 532 nm green light-driven self-assembly produces phase stable and highly luminescent γ-CsPbI3 NBs from CsPbI3 nanocrystals. Moreover, we show that a 670 nm red light-driven self-assembly process produces stable and near unity PLQY γ-CsPbI3 NPLs. Systematic time-dependent microscopy and spectroscopy studies on the morphological evolution indicates that the electromagnetic field of light triggered the desorption of surface ligands from the nanocrystal surface and transformation of crystallographic phase from α to γ. Detached ligands played an important role in determining the morphologies of final structures of NBs and NPLs from nanocrystals via oriented attachment along the [110] direction initially and then the [001] direction. In addition, XRD and fluorescence imaging data indicates that both NBs and NPLs exhibit phase stability for more than 60 days in ambient conditions, whereas the cubic phase α-CsPbI3 nanocrystals are not stable for even 3 days. The reported light driven synthesis provides a simple and versatile approach to obtain phase pure CsPbI3 for possible optoelectronic applications.
RESUMO
The rapid emergence of superbugs which are resistant to existing antibiotics is becoming a huge global threat to public health, which demands the discovery of next-generation antibacterial agents for combating superbugs. Herein, we report the design of a two-dimensional (2D) reduced graphene oxide (r-GO) and one-dimensional (1D) WO3 nanowire-based photothermal-photocatalytic heterostructure for combating multiantibiotic-resistant Salmonella DT104, carbapenem-resistant Enterobacteriaceae Escherichia coli, and methicillin-resistant Staphylococcus aureus superbugs. In the presence of near-infrared (NIR) light, due to the generation of electrons and holes, the WO3-based heterostructure generates reactive oxygen species by photocatalytic reaction from water and oxygen, which kills superbugs. To enhance the photocatalytic superbug killing efficiency, r-GO has been used for suppressing the recombination of the photoinduced electron-hole pairs. Reported data show that NIR light-driven synergistic photocatalytic-photothermal processes can be used for 100% degradation of methylene blue using a heterostructure-based catalyst, and the photodegradation rate for the heterostructure is much better than the literature data for different types of WO3/GO-based nanocomposites. Experimentally, time-dependent antibacterial efficiency data reveals that the heterostructure can destroy 100% superbugs within 30 min of light exposure via a synergistic photothermal and photocatalytic mechanism, whereas the WO3 nanowire can kill around 35% superbugs only via photocatalytic action only and r-GO can kill 25% superbugs via photothermal action even after 30 min of exposure to light. Systematic time-dependent microscopy and spectroscopy studies reveal that the excellent antisuperbug activities for heterostructures are due to membrane damage, ATP, and DNA/RNA breakage. For possible real-life applications, sun light-based superbug inactivation shows 100% inactivation possible within 250 min of light exposure using 12 mg/mL heterostructures. The reported sun light-driven killing of superbugs provides a simple and versatile platform to combat drug-resistant superbugs.
Assuntos
Staphylococcus aureus Resistente à Meticilina , Nanofios , Espécies Reativas de Oxigênio/metabolismo , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
The majority of nosocomial infections are caused by bacteria with antimicrobial resistance and the formation of biofilms, such as implant-related bacterial infections and sepsis. There is an urgent need to develop new strategies for early-stage screening, destruction of multidrug-resistant bacteria, and efficient inhibition of biofilms. Organic dyes that absorb and emit in the near-infrared (NIR) region are potentially non-invasive, high-resolution, and rapid biological imaging materials. In this study, a non-toxic and biocompatible indolizine squaraine dye with water-solubilizing sulfonate groups (SO3SQ) is studied for bacterial imaging and photothermal therapy (PTT). PTT is efficient in eliminating microorganisms through local hyperthermia without the risk of developing drug-resistant bacteria. The optical properties of SO3SQ are studied extensively in phosphate-buffered saline (PBS). UV-Vis-NIR absorption spectra analysis shows a strong absorption between 650 nm - 1000 nm. SO3SQ allows for the wash-free fluorescence imaging of drug-resistant bacteria via NIR fluorescence imaging due to a "turn-on" fluorescence property of the dye when interacting with bacteria. Although SO3SQ exhibits no toxicity against both Gram-positive bacteria and Gram-negative bacteria, the PTT property of SO3SQ is efficient in killing bacteria as well as inhibiting and eradicating biofilms. PTT experiments demonstrate that SO3SQ reduces 90% of cell viability in bacterial strains under NIR radiation with a minimum inhibition concentration (MIC90) of >450 µg/mL. The PTT property of SO3SQ can also inhibit biofilms (BIC90 = 1000-2000 µg/mL) and eradicate both preformed young and mature biofilms (MBEC90 = 1500-2000 µg/mL) as observed by crystal violet assays.
Assuntos
Indolizinas , Fototerapia , Fototerapia/métodos , Antibacterianos/farmacologia , Antibacterianos/química , Bactérias , Imagem Óptica , Biofilmes , Indolizinas/farmacologiaRESUMO
The emergence of Alpha, Beta, Gamma, Delta, and Omicron variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is responsible for several million deaths up to now. Because of the huge amount of vaccine escape mutations in the spike (S) protein for different variants, the design of material for combating SARS-CoV-2 is very important for our society. Herein, we report on the design of a human angiotensin converting enzyme 2 (ACE2) peptide-conjugated plasmonic-magnetic heterostructure, which has the capability for magnetic separation, identification via surface enhanced Raman spectroscopy (SERS), and inhibition of different variant SARS-CoV-2 infections. In this work, plasmonic-magnetic heterostructures were developed using the initial synthesis of polyethylenimine (PEI)-coated Fe3O4-based magnetic nanoparticles, and then gold nanoparticles (GNPs) were grown onto the surface of the magnetic nanoparticles. Experimental binding data between ACE2-conjugated plasmonic-magnetic heterostructures and spike-receptor-binding domain (RBD) show that the Omicron variant has maximum binding ability, and it follows Alpha < Beta < Gamma < Delta < Omicron. Our finding shows that, due to the high magnetic moment (specific magnetization 40 emu/g), bioconjugated heterostructures are capable of effective magnetic separation of pseudotyped SARS-CoV-2 bearing the Delta variant spike from an infected artificial nasal mucus fluid sample using a simple bar magnet. Experimental data show that due to the formation of huge "hot spots" in the presence of SARS-CoV-2, Raman intensity for the 4-aminothiolphenol (4-ATP) Raman reporter was enhanced sharply, which has been used for the identification of separated virus. Theoretical calculations using finite-difference time-domain (FDTD) simulation indicate that, due to the "hot spots" formation, a six orders of magnitude Raman enhancement can be observed. A concentration-dependent inhibition efficiency investigation using a HEK293T-human cell line indicates that ACE2 peptide-conjugated plasmonic-magnetic heterostructures have the capability of complete inhibition of entry of different variants and original SARS-CoV-2 pseudovirions into host cells.
RESUMO
As per the American Cancer Society, lung cancer is the leading cause of cancer-related death worldwide. Since the accumulation of exosomal programmed cell death ligand 1 (PD-L1) is associated with therapeutic resistance in programmed cell death 1 (PD-1) and PD-L1 immunotherapy, tracking PD-L1-positive (PD-L1 (+)) exosomes is very important for predicting anti-PD-1 and anti-PD-L1 therapy for lung cancer. Herein, we report the design of an anti-PD-L1 monoclonal antibody-conjugated magnetic-nanoparticle-attached yellow fluorescent carbon dot (YFCD) based magnetic-fluorescence nanoarchitecture for the selective separation and accurate identification of PD-L1-expressing exosomes. In this work, photostable YFCDs with a good photoluminescence quantum yield (23%) were synthesized by hydrothermal treatment. In addition, nanoarchitectures with superparamagnetic (28.6 emu/g), biocompatible, and selective bioimaging capabilities were developed by chemically conjugating the anti-PD-L1 antibody and YFCDs with iron oxide nanoparticles. Importantly, using human non-small-cell lung cancer H460 cells lines, which express a high amount of PD-L1 (+) exosomes, A549 lung cancer cells lines, which express a low amount of PD-L1 (+) exosomes, and the normal skin HaCaT cell line, which does not express any PD-L1 (+) exosomes, we demonstrate that nanoarchitectures are capable of effectively separating and tracking PD-L1-positive exosomes simultaneously. Furthermore, as a proof-of-concept of clinical setting applications, a whole blood sample infected with PD-L1 (+) exosomes was analyzed, and our finding shows that this nanoarchitecture holds great promise for clinical applications.
RESUMO
The emergence of double mutation delta (B.1.617.2) variants has dropped vaccine effectiveness against SARS-CoV-2 infection. Although COVID-19 is responsible for more than 5.4 M deaths till now, more than 40% of infected individuals are asymptomatic carriers as the immune system of the human body can control the SARS-CoV-2 infection. Herein, we report for the first time that human host defense neutrophil α-defensin HNP1 and human cathelicidin LL-37 peptide-conjugated graphene quantum dots (GQDs) have the capability to prevent the delta variant virus entry into the host cells via blocking SARS-CoV-2 delta variant (B.1.617.2) spike protein receptor-binding domain (RBD) binding with host cells' angiotensin converting enzyme 2 (ACE2). Experimental data shows that due to the binding between the delta variant spike protein RBD and bioconjugate GQDs, in the presence of the delta variant spike protein, the fluorescence signal from GQDs quenched abruptly. Experimental quenching data shows a nonlinear Stern-Volmer quenching profile, which indicates multiple binding sites. Using the modified Hill equation, we have determined n = 2.6 and the effective binding affinity 9 nM, which is comparable with the ACE2-spike protein binding affinity (8 nM). Using the alpha, beta, and gamma variant spike-RBD, experimental data shows that the binding affinity for the delta B.1.617.2 variant is higher than those for the other variants. Further investigation using the HEK293T-human ACE2 cell line indicates that peptide-conjugated GQDs have the capability for completely inhibiting the entry of delta variant SARS-CoV-2 pseudovirions into host cells via blocking the ACE2-spike protein binding. Experimental data shows that the inhibition efficiency for LL-37 peptide- and HNP1 peptide-attached GQDs are much higher than that of only one type of peptide-attached GQDs.
RESUMO
Infectious diseases by pathogenic microorganisms are one of the leading causes of mortality worldwide. Healthcare and socio-economic development have been seriously affected for different civilizations because of bacterial and viral infections. According to the Centers for Disease Control and Prevention (CDC), pandemic in 1918 by the Influenza A virus of the H1N1 subtype was responsible for 50 to 100 million deaths worldwide. Similarly, the Asian flu pandemic in 1957, Hong Kong flu in 1968, and H1N1pdm09 flu pandemic in 2009 were responsible for more than 1 million deaths across the globe each time. As per the World Health Organization (WHO), the current pandemic by coronavirus disease 2019 (COVID-19) due to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus is responsible for more than 4.8 M death worldwide until now. Since the gold standard polymerase chain reaction (PCR) test is more time-consuming, the health care system cannot test all symptomatic and asymptomatic Covid patients every day, which is extremely important to tackle the outbreak. One of the significant challenges during the current pandemic is developing mass testing tools, which is critical to control the virus spread in the community. Therefore, it is highly desirable to develop advanced material-based approaches that can provide a rapid and accurate diagnosis of COVID-19, which will have the capability to save millions of human lives. Aiming for the targeted diagnosis of deadly virus, researchers have developed nanomaterials with various sizes, shapes, and dimensions. These nanomaterials have been used to identify biomolecules via unique optical, electrical, magnetic, structural, and functional properties, which are lacking in other materials. Despite significant progress, nanomaterial-based diagnosis of biomolecules is still facing several obstacles due to low targeting efficiency and nonspecific interactions. To overcome these problems, the bioconjugated nanoparticle has been designed via surface coating with polyethylene glycol (PEG) and then conjugated with antibodies, DNA, RNA, or peptide aptamers. Therefore, the current Account summarizes an overview of the recent advances in the design of bioconjugated nanomaterial-based approached as effective diagnosis of the SARS-CoV-2 virus and the SARS-CoV-2 viral RNA, antigen, or antibody, with a particular focus on our work and other's work related to this subject. First, we present how to tailor the surface functionalities of nanomaterials to achieve bioconjugated material for targeted diagnosis of the virus. Then we review the very recent advances in the design of antibody/aptamer/peptide conjugated nanostructure, which represent a powerful platform for naked-eye colorimetric detection via plasmonic nanoparticles. We then discuss nanomaterial-based surface-enhanced Raman scattering (SERS) spectroscopy, which has the capability for very low-level fingerprint identification of virus, antigen, and antibody via graphene, plasmonic nanoparticle, and heterostructure material. After that, we summarized about fluorescence and nanoparticle surface energy transfer (NSET)-based on specific identification of SARS-CoV-2 infections via CNT, quantum dots (QDs), and plasmonic nanoparticles. Finally, we highlight the merit and significant challenges of nanostructure-based tools in infectious diseases diagnosis. For the researchers who want to engage in the new development of bioconjugated material for our survival from the current and future pandemics, we hope that this Account will be helpful for generating ideas that are scientifically stimulating and practically challenging.
RESUMO
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the cause of the coronavirus disease that began in 2019 (COVID-19), has been responsible for 1.4 million deaths worldwide as of 13 November 2020. Because at the time of writing no vaccine is yet available, a rapid diagnostic assay is very urgently needed. Herein, we present the development of anti-spike antibody attached gold nanoparticles for the rapid diagnosis of specific COVID-19 viral antigen or virus via a simple colorimetric change observation within a 5 minute time period. For rapid and highly sensitive identification, surface enhanced Raman spectroscopy (SERS) was employed using 4-aminothiophenol as a reporter molecule, which is attached to the gold nanoparticle via an Au-S bond. In the presence of COVID-19 antigen or virus particles, owing to the antigen-antibody interaction, the gold nanoparticles undergo aggregation, changing color from pink to blue, which allows for the determination of the presence of antigen or virus very rapidly by the naked eye, even at concentrations of 1 nanogram (ng) per mL for COVID-19 antigen and 1000 virus particles per mL for SARS-CoV-2 spike protein pseudotyped baculovirus. Importantly, the aggregated gold nanoparticles form "hot spots" to provide very strong SERS signal enhancement from anti-spike antibody and 4-aminothiophenol attached gold nanoparticles via light-matter interactions. Finite-difference time-domain (FDTD) simulation data indicate a 4-orders-of-magnitude Raman enhancement in "hot spot" positions when gold nanoparticles form aggregates. Using a portable Raman analyzer, our reported data demonstrate that our antibody and 4-aminothiophenol attached gold nanoparticle-based SERS probe has the capability to detect COVID-19 antigen even at a concentration of 4 picograms (pg) per mL and virus at a concentration of 18 virus particles per mL within a 5 minute time period. Using HEK293T cells, which express angiotensin-converting enzyme 2 (ACE2), by which SARS-CoV-2 enters human cells, we show that anti-spike antibody attached gold nanoparticles have the capability to inhibit infection by the virus. Our reported data show that antibody attached gold nanoparticles bind to SARS-CoV-2 spike protein, thereby inhibiting the virus from binding to cell receptors, which stops virus infection and spread. It also has the capability to destroy the lipid membrane of the virus.
RESUMO
Two-photon imaging in the near-infrared window holds huge promise for real life biological imaging due to the increased penetration depth. All-inorganic CsPbX3 nanocrystals with bright luminescence and broad spectral tunability are excellent smart probes for two-photon bioimaging. But, the poor stability in water is a well-documented issue for limiting their practical use. Herein, we present the development of specific antibody attached water-resistant one-dimensional (1D) CsPbBr3 nanowires, two-dimensional (2D) CsPbBr3 nanoplatelets, and three-dimensional (3D) CsPbBr3 nanocubes which can be used for selective and simultaneous two-photon imaging of heterogeneous breast cancer cells in the near IR biological window. The current manuscript reports the design of excellent photoluminescence quantum yield (PLQY), biocompatible and photostable 1D CsPbBr3 nanowires, 2D CsPbBr3 nanoplatelets, and 3D CsPbBr3 nanocubes through an interfacial conversion from zero-dimensional (0D) Cs4PbBr6 nanocrystals via a water triggered strategy. Reported data show that just by varying the amount of water, one can control the dimension of CsPbBr3 perovskite crystals. Time-dependent transition electron microscopy and emission spectra have been reported to find the possible pathway for the formation of 1D, 2D, and 3D CsPbBr3 nanocrystals from 0D Cs4PbBr6 nanocrystals. Biocompatible 1D, 2D, and 3D CsPbBr3 nanocrystals were developed by coating with amine-poly(ethylene glycol)-propionic acid. Experimental data show the water-driven design of 1D, 2D, and 3D CsPbBr3 nanocrystals exhibits strong single-photon PLQY of â¼66-88% as well as excellent two-photon absorption properties (σ2) of â¼8.3 × 105-7.1 × 104 GM. Furthermore, reported data show more than 86% of PL intensity remains for 1D, 2D, and 3D CsPbBr3 nanocrystals after 35 days under water, and they exhibit excellent photostability of keeping 99% PL intensity after 3 h under UV light. The current report demonstrates for the first time that antibody attached 1D and 2D perovskites have capability for simultaneous two-photon imaging of triple negative breast cancer cells and human epidermal growth factor receptor 2 positive breast cancer cells. CsPbBr3 nanocrystals exhibit very high two-photon absorption cross-section and good photostability in water, which are superior to those of commonly used organic probes (σ2 = 11 GM for fluorescein), and therefore, they have capability to be a better probe for bioimaging applications.
RESUMO
The ongoing outbreak of the coronavirus infection has killed more than 2 million people. Herein, we demonstrate that Rhodamine 6G (Rh-6G) dye conjugated DNA aptamer-attached gold nanostar (GNS)-based distance-dependent nanoparticle surface energy transfer (NSET) spectroscopy has the capability of rapid diagnosis of specific SARS-CoV-2 spike recombinant antigen or SARS-CoV-2 spike protein pseudotyped baculovirus within 10 min. Because Rh-6G-attached single-stand DNA aptamer wrapped the GNS, 99% dye fluorescence was quenched because of the NSET process. In the presence of spike antigen or virus, the fluorescence signal persists because of the aptamer-spike protein binding. Specifically, the limit of detection for the NSET assay has been determined to be 130 fg/mL for antigen and 8 particles/mL for virus. Finally, we have demonstrated that DNA aptamer-attached GNSs can stop virus infection by blocking the angiotensin-converting enzyme 2 (ACE2) receptor binding capability and destroying the lipid membrane of the virus.
Assuntos
Antígenos Virais/análise , Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais/métodos , COVID-19/diagnóstico , Ouro/química , Nanopartículas Metálicas/química , SARS-CoV-2/metabolismo , Glicoproteína da Espícula de Coronavírus/análise , Enzima de Conversão de Angiotensina 2/metabolismo , Antígenos Virais/metabolismo , Aptâmeros de Nucleotídeos/metabolismo , Teste para COVID-19/métodos , Transferência de Energia , Humanos , Limite de Detecção , Ligação Proteica , SARS-CoV-2/efeitos dos fármacos , Glicoproteína da Espícula de Coronavírus/metabolismoRESUMO
Raman spectroscopy has capability for fingerprint molecular identification with high sensitivity if weak Raman scattering signal can be enhanced by several orders of magnitudes. Herein, we report a heterostructure-based surface-enhanced Raman spectroscopy (SERS) platform using 2D graphene oxide (GO) and 0D plasmonic gold nanostar (GNS), with capability of Raman enhancement factor (EF) in the range of â¼1010 via light-matter and matter-matter interactions. The current manuscript reveals huge Raman enhancement for heterostructure materials occurring via both electromagnetic enhancement mechanism though plasmonic GNS nanoparticle (EF â¼107) and chemical enhancement mechanism through 2D-GO material (EF â¼102). Finite-difference time-domain (FDTD) simulation data and experimental investigation indicate that GNS allows light to be concentrated into nanoscale "hotspots" formed on the heterostructure surface, which significantly enhanced Raman efficiency via a plasmon-exciton light coupling process. Notably, we have shown that mixed-dimensional heterostructure-based SERS can be used for tracking of cancer-derived exosomes from triple-negative breast cancer and HER2(+) breast cancer with a limit of detection (LOD) of 3.8 × 102 exosomes/mL for TNBC-derived exosomes and 4.4 × 102 exosomes/mL for HER2(+) breast cancer-derived exosomes.
RESUMO
In the last three decades, there has been a huge increase in the number of antibiotic-resistant bacterial strains, which is becoming a serious threat to public health. Since the discovery of new effective antibiotics has dramatically decreased in last ten years, there are huge initiatives to develop new antimicrobial approaches to fight drug-resistant bacterial infections. In the last decade, a new nanoparticle-based tool has emerged to combat deadly bacterial infections, which may overcome the barriers faced by antibiotic resistance. The current mini-review highlights recent reports on two-dimensional (2D) graphene oxide (GO), 2D transition metal dichalcogenides (TMD), 2D MXenes, and 2D heterostructure material-based approaches to tackle bacteria. Notably, we discuss the major design criteria which have been used to develop novel antimicrobial 2D and heterostructure materials to eliminate bacterial infections. Next, details on the various mechanisms underlying antibacterial activity for 2D and heterostructure materials such as physical/mechanical damage, lipid extraction, oxidative stress, and photothermal/photodynamic effects have been discussed. Finally, we highlight the promises, major challenges, and prospects of nanomaterial-based approaches to combat multidrug-resistant bacterial infections.