Microwave-induced covalent functionalization of few-layer graphene with arynes under solvent-free conditions.

A non-conventional modification of exfoliated few-layer graphene (FLG) with different arynes under microwave (MW) irradiation and solvent-free conditions is reported. The described approach allows reaching fast, efficient and mild covalent functionalization of FLG.

A water-soluble, bay-functionalized perylenediimide derivative - correlating aggregation and excited state dynamics.

The aggregation and the photophysics of a water soluble perylenediimide (PDI) derivative that features two bromine substituents in the bay positions has been probed. Non-fluorescent aggregates were found to be present at concentrations of 1.0 × 10-5 M. In situ small-angle X-ray scattering (SAXS) measurements and complementary molecular modeling showed the presence of PDI aggregates. In their singlet excited states, the PDI aggregates are characterized by distinct transient fingerprints and rapid deactivation, as revealed by pump-probe experiments on the femto-, pico-, nano-, and microsecond timescales. The product of this deactivation is a PDI triplet excited state. The efficiency of the triplet formation depends on the concentration, and hence on the degree of aggregation. Notably, for PDI concentrations in the range of the critical micelle concentration, the efficiency of intersystem crossing is close to zero. In short, we have demonstrated, for the first time, aggregation-induced formation of triplet excited states for PDI derivatives.

Metal Nanoclusters with Synergistically Engineered Optical and Buffering Activity of Intracellular Reactive Oxygen Species by Compositional and Supramolecular Design.

Metal nanoclusters featuring tunable luminescence and high biocompatibility are receiving attention as fluorescent markers for cellular imaging. The recently discovered ability of gold clusters to scavenge cytotoxic reactive oxygen species (ROS) from the intracellular environment extends their applicability to biomedical theranostics and provides a novel platform for realizing multifunctional luminescent probes with engineered anti-cytotoxic activity for applications in bio-diagnostics and conceivably cellular therapy. This goal could be achieved by using clusters of strongly reactive metals such as silver, provided that strategies are found to enhance their luminescence while simultaneously enabling direct interaction between the metal atoms and the chemical surroundings. In this work, we demonstrate a synergic approach for realizing multifunctional metal clusters combining enhanced luminescence with strong and lasting ROS scavenging activity, based on the fabrication and in situ protection of Ag nanoclusters with a supramolecular mantle of thiolated-Au atoms (Ag/Au-t). Confocal imaging and viability measurements highlight the biocompatibility of Ag/Au-t and their suitability as fluorescent bio-markers. ROS concentration tests reveal the remarkable scavenging activity of Ag-based clusters. Proliferation tests of cells in artificially stressed culture conditions point out their prolonged anti-cytotoxic effect with respect to gold systems, ensuring positive cell proliferation rates even for long incubation time.

Nanocrystalline cellulose-fullerene: Novel conjugates.

The covalent grafting of two amino-fullerene C60 derivatives (C60-LC-NH2 and C60-SC-NH2, LC=long chain and SC=short chain) onto the surface of TEMPO oxidized nanocrystalline cellulose (NCC-COOH) has been reported for the first time. These hybrids (NCC-LC-C60 and NCC-SC-C60) form stable colloidal suspensions at concentrations up to 0.5mg/mL and act as effective photosensitizers for singlet oxygen production as demonstrated by the oxidation of L-methionine-methyl ester to the corresponding sulphoxide. Using the same approach, in a one-pot reaction both a fluorescent target molecule (FITC-LC-NH2) and the C60-LC-NH2 derivative have been successfully attached covalently onto the NCC-COOH surface. These hybrids, which showed no cytotoxicity on MCF-7 human breast cancer cells could be good candidates in photodynamic cancer therapy.

A simple approach to synthetize folic acid decorated magnetite@SiO2 nanostructures for hyperthermia applications.

Superparamagnetic magnetite nanoparticles were synthetized and capped by a SiO2 shell in order to avoid oxidation and aggregation of the iron oxide nanostructures. The inorganic capping was then further decorated by folic acid molecules, by using a very simple procedure exploiting supramolecular interactions among the organic moieties and the inorganic nanoparticles. The supramolecular nanoadduct thanks to folic acid molecules could act as a "Trojan horse" for the cancer cells and due to its superparamagnetic properties could induce local heat generation upon an appropriate magnetic field application. In fact, temperature was increased up to 42 °C when a 18 mT magnetic field was applied to the nanoparticles and the hybrid nanostructures were verified to be selectively internalized by HeLa cells, a human cervical cancer line known to overexpress the folic acid receptor.

Highly sensitive electrochemiluminescence detection of a prostate cancer biomarker.

Prostate-specific membrane antigen (PSMA), a glycoprotein expressed in the prostatic epithelium endowed with enzymatic activity, is a very promising diagnostic marker for the early detection of prostate cancer. In this study, we report a novel electrochemiluminescence ELISA-like immunosensor based on carbon nanotubes and a highly specific sandwich immunoassay for the PSMA detection. To fabricate the device, an optically transparent electrode was modified with doubly functionalized multi-walled carbon nanotubes carrying amine groups and a monoclonal anti-PSMA antibody. Subsequently, to complete the sandwich immunosensing device, a second specific monoclonal anti-PSMA antibody was labelled with a electrochemiluminescent probe. Under optimized experimental conditions, the proposed sensing device exhibits a performance exceeding that of the state of-the-art in terms of the limit of detection (LOD) and limit of quantification (LOQ) as good as 0.88 ng mL-1 and 2.60 ng mL-1, respectively, in real complex samples such as cell lysates. In addition, the unique role of carbon nanotubes is also discussed by comparison with an analogue sensor assembled without the nanocarbon-based material.

Effects of faba beans with different concentrations of vicine and convicine on egg production, egg quality and red blood cells in laying hens.

The faba bean (Vicia faba L.) is a potential source of proteins for poultry, mainly for laying hens whose protein requirements are lower than those of other birds such as growing broilers and turkeys. However, this feedstuff contains anti-nutritional factors, that is, vicine (V) and convicine (C) that are already known to reduce laying hen performance. The aim of the experiment reported here was to evaluate the effects of a wide range of dietary V and C concentrations in laying hens. Two trials were performed with laying hens fed diets including 20% or 25% of faba bean genotypes highly contrasting in V+C content. In Trial 1, faba beans from two tannin-containing cultivars, but with high or low V+C content were dehulled in order to eliminate the tannin effect. In addition to the contrasting levels of V+C in the two cultivars, two intermediate levels of V+C were obtained by mixing the two cultivars (70/30 and 30/70). In Trial 2, two isogenic zero-tannin faba bean genotypes with high or low V+C content were used. In both trials, a classical corn-soybean diet was also offered to control hens. Each experimental diet was given to 48 laying hens for 140 (Trial 1) or 89 (Trial 2) days. Laying performance and egg quality were measured. The redox sensitivity of red blood cells (RBCs) was assessed by measuring hemolysis and reduced glutathione (GSH) concentration in these cells. Egg weight was significantly reduced by the diets containing the highest concentrations of V+C (P<0.0001) in Trial 1 and slightly reduced (P<0.10) in Trial 2, but only weak linear relationships between egg weight and dietary V+C concentration were established. No negative effect of V+C level was observed for egg quality parameters. In contrast, certain parameters (i.e. Haugh units, yolk color) were improved by feeding low V+C diets (P<0.05). Hemolysis of RBCs was higher in hens fed high V+C diets. A decrease in GSH concentration in RBCs of hens fed the highest levels of V+C was observed. Faba bean genotypes with low concentrations of V+C can therefore be used in laying hen diets up to 25% without any detrimental effects on performance levels or egg characteristics, without any risk of hemolysis of RBCs.

Production and stability of mechanochemically exfoliated graphene in water and culture media.

The preparation of graphene suspensions in water, without detergents or any other additives is achieved using freeze-dried graphene powders, produced by mechanochemical exfoliation of graphite. These powders of graphene can be safely stored or shipped, and promptly dissolved in aqueous media. The suspensions are relatively stable in terms of time, with a maximum loss of ∼25% of the initial concentration at 2 h. This work provides an easy and general access to aqueous graphene suspensions of chemically non-modified graphene samples, an otherwise (almost) impossible task to achieve by other means. A detailed study of the stability of the relative dispersions is also reported.

Facile and quick preparation of carbon nanohorn-based counter electrodes for efficient dye-sensitized solar cells.

For the first time, Pt-free counter electrodes based on carbon nanohorns for highly efficient dye-sensitized solar cells were assembled by a facile and fast drop cast technique. These novel electrodes feature an effective catalytic behavior towards the reduction of I3(-) and, as such, afford even higher short-circuit current densities compared to Pt-based references. In a final device, solar cells with 7.7% efficiency were achieved.

[60]Fullerene-porphyrin [n]pseudorotaxanes: self-assembly, photophysics and third-order NLO response.

By means of different spectroscopic techniques, we investigate a novel series of porphyrin derivatives (H2TPP), connected to dibenzo-24-crown-8 (DB24C8) moieties, which undergo self-assembly with different methano[60]fullerene units bearing dibenzylammonium (DBA) cations. The formation of both [2] and [3]pseudorotaxanes was proved by means of NMR, UV-Vis-NIR absorption and emission spectroscopies. With the support of molecular modelling studies, spectroscopic investigations showed the presence of a secondary interaction between the porphyrin and the C60 chromophores leading to the formation of different types of "face-to-face" assemblies. Remarkably, investigations of the non-linear optical response of these supramolecular systems showed that individual porphyrin and fullerene derivatives exhibit significantly lower second hyperpolarizability values when compared to their pseudorotaxanes functionalised counterparts. This proves that this class of supramolecular materials possesses relevant NLO response, which strongly depends on the structural arrangement of the chromophores in solution.

Highly efficient hydrogen production through ethanol photoreforming by a carbon nanocone/Pd@TiO2 hybrid catalyst.

Production of molecular hydrogen (H2) is becoming an increasingly prominent process, due to high expectations as a new green energy carrier and key reagent for many industrial processes. Herein we report the high efficiency of H2 production via photoreforming of ethanol using a catalyst based on hierarchical carbon nanocones hybridised with an inorganic layer of nanocrystalline TiO2 containing Pd nanoparticles.

Early diagnosis of bladder cancer through the detection of urinary tyrosine-phosphorylated proteins.

BACKGROUND: A noninvasive, highly sensitive and specific urine test is needed for bladder cancer (BC) diagnosis and surveillance in addition to the invasive cystoscopy. We previously described the diagnostic effectiveness of urinary tyrosine-phosphorylated proteins (UPY) and a new assay (UPY-A) for their measurement in a pilot study. The aim of this work was to evaluate the performances of the UPY-A using an independent cohort of 262 subjects. METHODS: Urinary tyrosine-phosphorylated proteins were measured by UPY-A test. The area under ROC curve, cutoff, sensitivity, specificity and predictive values of UPY-A were determined. The association of UPY levels with tumour staging, grading, recurrence and progression risk was analysed by Kruskal-Wallis and Wilcoxon's test. To test the probability to be a case if positive at the UPY-A, a logistic test adjusted for possible confounding factor was used. RESULTS: Results showed a significant difference of UPY levels between patients with BC vs healthy controls. For the best cutoff value, 261.26 Standard Units (SU), the sensitivity of the assay was 80.43% and the specificity was 78.82%. A statistically significant difference was found in the levels of UPY at different BC stages and grades between Ta and T1 and with different risk of recurrence and progression. A statistically significant increased risk for BC at UPY-A ⩾261.26 SU was observed. CONCLUSIONS: The present study supplies important information on the diagnostic characteristics of UPY-A revealing remarkable performances for early stages and allowing its potential use for different applications encompassing the screening of high-risk subjects, primary diagnosis and posttreatment surveillance.

In situ growth of capping-free magnetic iron oxide nanoparticles on liquid-phase exfoliated graphene.

We report a facile approach for the in situ synthesis of very small iron oxide nanoparticles on the surface of high-quality graphene sheets. Our synthetic strategy involved the direct, liquid-phase exfoliation of highly crystalline graphite (avoiding any oxidation treatment) and the subsequent chemical functionalization of the graphene sheets via the well-established 1,3-dipolar cycloaddition reaction. The resulting graphene derivatives were employed for the immobilization of the nanoparticle precursor (Fe cations) at the introduced organic groups by a modified wet-impregnation method, followed by interaction with acetic acid vapours. The final graphene-iron oxide hybrid material was achieved by heating (calcination) in an inert atmosphere. Characterization by X-ray diffraction, transmission electron and atomic force microscopy, Raman and X-ray photoelectron spectroscopy gave evidence for the formation of rather small (<12 nm), spherical, magnetite-rich nanoparticles which were evenly distributed on the surface of few-layer (<1.2 nm thick) graphene. Due to the presence of the iron oxide nanoparticles, the hybrid material showed a superparamagnetic behaviour at room temperature.

Chemical modification of carbon nanomaterials (SWCNTs, DWCNTs, MWCNTs and SWCNHs) with diphenyl dichalcogenides.

Control over chemical functionalization is a crucial point in the field of nanotechnology. Herein, we present the covalent functionalization of several carbon nanoforms (single-walled carbon nanotubes, double-walled carbon nanotubes, multi-walled carbon nanotubes and carbon nanohorns) by means of diphenyl dichalcogenides. These ones show different reactivity to the nanomaterials and are able to modify their electronic properties depending on the electronegativity of the functionalizing heteroatom. Theoretical calculations were also performed to support the experimental results. All the modified structured nanocarbons were thoroughly characterized by TGA Raman, XPS, UV/Vis/nIR, IR and TEM techniques. Our findings propose a simple approach to functionalize carbon nanomaterials and, in the meantime, to tune their electronic properties.

Under the lens: carbon nanotube and protein interaction at the nanoscale.

The combination of the very different chemical natures of carbon nanotubes (CNTs) and proteins gives rise to systems with unprecedented performance, thanks to a rich pool of very diverse chemical, electronic, catalytic and biological properties. Here we review recent advances in the field, including innovative and imaginative aspects from a nanoscale point of view. The tubular nature of CNTs allows for internal protein encapsulation, and also for their external coating by protein cages, affording bottom-up ordering of molecules in hierarchical structures. To achieve such complex systems it is imperative to master the intermolecular forces between CNTs and proteins, including geometry effects (e.g. CNT diameter and curvature) and how they translate into changes in the local environment (e.g. water entropy). The type of interaction between proteins and CNTs has important consequences for the preservation of their structure and, in turn, function. This key aspect cannot be neglected during the design of their conjugation, be it covalent, non-covalent, or based on a combination of both methods. The review concludes with a brief discussion of the very many applications intended for CNT-protein systems that go across various fields of science, from industrial biocatalysis to nanomedicine, from innovative materials to biotechnological tools in molecular biology research.

Highly selective detection of Epinephrine at oxidized Single-Wall Carbon Nanohorns modified Screen Printed Electrodes (SPEs).

Oxidized Single-Wall Carbon Nanohorns (o-SWCNHs) were used, for the first time, to assemble chemically modified Screen Printed Electrodes (SPEs) selective towards the electrochemical detection of Epinephrine (Ep), in the presence of Serotonine-5-HT (S-5HT), Dopamine (DA), Nor-Epineprhine (Nor-Ep), Ascorbic Acid (AA), Acetaminophen (Ac) and Uric Acid (UA). The Ep neurotransmitter was detected by using Differential Pulse Voltammetry (DPV), in a wide linear range of concentration (2-2500 µM) with high sensitivity (55.77 A M(-1) cm(-2)), very good reproducibility (RSD% ranging from 2 to 10 for different SPEs), short response time for each measurement (only 2s) and low detection of limit (LOD=0.1 µM). o-SWCNHs resulted in higher analytical performances when compared with other nanomaterials used in literature for electrochemical sensors assembly.

Graphene for multi-functional synthetic biology: the last 'zeitgeist' in nanomedicine.

The high versatility of graphene has attracted significant attention in many areas of scientific research from electronics to physics and mechanics. One of the most intriguing utilisation of graphene remains however in nanomedicine and synthetic biology. In particular, the last decade has witnessed an exponential growth in the generation of novel candidate therapeutics of multiple biological activities based on graphene constructs with small molecules, such as anti-cancer drugs. In this Digest, we summarise the different synthetic strategies and routes available to fabricate these promising graphene conjugates and the opportunities for the design of multi-functional tools for synthetic biology that they offer.

Production of Sexuals and Mating Frequency in the Stingless Bee Tetragonisca angustula (Latreille) (Hymenoptera, Apidae).

Queen, worker, and male production was studied for 1 year in three queenright colonies of Tetragonisca angustula (Latreille). We sampled brood combs monthly and noticed that the number of brood cells and production of individuals were similar among colonies. Although the production of queens did not vary significantly, the frequencies of workers, males, and the number of cells among the combs varied over time. The production of males was highly seasonal, occurring mostly from February to April, coinciding with the period of intense brood cells production, when colonies produced more males and less workers, resulting in a negative correlation. Although the frequency of queens has not varied in time, the seasonal availability of males affected the mating frequency and the time spent since emergence until fertilization of queens. In the T. angustula colonies studied, the population dynamics was highly seasonal and the mating success depended of male production, according to the season.

Sandwich ELISA assay for the quantitation of palytoxin and its analogs in natural samples.

Palytoxins are potent marine biotoxins that have recently become endemic to the Mediterranean Sea, and are becoming more frequently associated with seafood. Due to their high toxicity, suitable methods to quantify palytoxins are needed. Thus, we developed an indirect sandwich ELISA for palytoxin and 42-hydroxy-palytoxin. An intralaboratory study demonstrated sensitivity (limit of detection, LOD = 1.1 ng/mL; limit of quantitation, LOQ = 2.2 ng/mL), accuracy (bias of 2.1%), repeatability (RSDr = 6% and 9% for intra- and interassay variability, respectively) and specificity: other common marine toxins (okadaic acid, domoic acid, saxitoxin, brevetoxin-3, and yessotoxin) do not cross-react in this assay. It performed well in three different matrices: observed LOQs were 11.0, 9.6, and 2.4 ng/mL for mussel extracts, algal net samples and seawater, respectively, with good accuracy and precision. The LOQ in seafood is 11 µg palytoxin/kg mussel meat, lower than that of the most common detection technique, LC-MS/MS.

Interaction of alkanethiols with nanoporous cluster-assembled Au films.

This article presents a study of the interaction of octadecanethiol molecules (C(18)) with nanoporous cluster-assembled gold films under a liquid environment based on a combined spectroscopic ellipsometry and X-ray photoelectron spectroscopy investigation. By comparing the optical response, following the deposition of C(18), of cluster-assembled films with varying degrees of porosity with that of flat surfaces and by resolving the corresponding features of the molecule-Au bond, we have been able to define the conditions that either favor molecular in-depth diffusion into the pores or promote the formation of a molecular self-assembled monolayer (SAM) restricted to the film surface. In the presence of abundant open pores, C(18) molecules strongly diffuse within the film interior and bind to the pore walls, whereas in the presence of porous films with less abundant open pores we have observed that the molecules tend to remain confined to the surface region, adopting a SAM-like configuration.