Intensity modulation with the "step and shoot" technique using a commercial MLC: a planning study. Multileaf collimator.

PURPOSE/OBJECTIVE: For complex planning situations where organs at risk (OAR) surrounding the target volume place stringent constraints, intensity-modulated treatments with photons provide a promising solution to improve tumor control and/or reduce side effects. One approach for the clinical implementation of intensity-modulated treatments is the use of a multileaf collimator (MLC) in the "step and shoot" mode, in which multiple subfields are superimposed for each beam direction to generate stratified intensity distributions with a discrete number of intensity levels. In this paper, we examine the interrelation between the number of intensity levels per beam for various numbers of beams, the conformity of the resulting dose distribution, and the treatment time on a commercial accelerator (Siemens Mevatron KD2) with built-in MLC. METHODS AND MATERIALS: Two typical, clinically relevant cases of patients with head and neck tumors were selected for this study. Using the inverse planning technique, optimized treatment plans are generated for 3-25 evenly distributed coplanar beams as well as noncoplanar beams. An iterative gradient method is used to optimize a physical treatment objective that is based on the specified target dose and individual dose constraints assigned to each organ at risk (brain stem, eyes, optic nerves) by the radiation oncologist. The intensity distribution of each beam is discretized within the inverse planning program into three to infinitely many intensity levels or strata. These stratified intensity distributions are converted into MLC leaf position sequences, which can be subsequently transferred via computer link to the linac console, and can be delivered without user intervention. The quality of the plan is determined by comparing the values of the objective function, dose-volume histograms (DVHs), and isodose distributions. RESULTS: Highly conformal dose distributions can be achieved with five intensity levels in each of seven beams. The merit of using more intensity levels or more beams is relatively small. Acceptable results are achievable even with three levels only. On average, the number of subfields per beam is about 2-2.5 times the number of intensity levels. The average treatment time per subfield is about 20 s. The total treatment time for the three-level and seven-beam case with a total of 39 subfields is 13 min. CONCLUSION: Optimizing stratified intensity distributions in the inverse planning process allows us to achieve close to optimum results with a surprisingly small number of intensity levels. This finding may help to facilitate and accelerate the delivery of intensity-modulated treatments with the "step and shoot" technique.

[Inverse radiotherapy planning for intensity modulated photon fields]. / Inverse Strahlentherapieplanung für intensitätsmodulierte Photonenfelder.

Substantial improvement in conformal radiotherapy is possible using modulated irradiation fields. Such modulated fields may be generated even with conventional accelerators by means of individual metal compensators or with the recently available dynamic multileaf collimators (MLC). For treatment planning a new kind of planning program is required that can calculate the 2 D-intensity matrices for each photon field. At the German Cancer Research Center (Deutsches Krebsforschungszentrum) such a program has been developed under the name of "KonRad" (Conformal Radiotherapy). Although it is an independent application, it is proposed for clinical usage to supplement a planning system that is already present. So-called inverse planning differs from conventional 3 D planning, as the trial-and-error approach for finding good field parameters is nearly completely avoided. Instead, the radio-oncologist is given the chance directly to specify medically oriented criteria like the prescription dose in the target volume, maximal tolerance dose values for each organ at risk and their weighting factors. In addition, the so-called DVH optimization allows aimed, partial overdosage, especially in parallelly structured organs in order to obtain better overall planning results. Because of very fast dose calculation in connection with rapidly converging gradient optimization and an intuitive use interface, the planning is done in a comfortable and interactive manner. Using a workstation or a PC, a typical plan can be created within a few minutes.

Number and orientations of beams in intensity-modulated radiation treatments.

The fundamental question of how many equispaced coplanar intensity-modulated photon beams are required to obtain an optimum treatment plan is investigated in a dose escalation study for a typical prostate tumor. Furthermore, optimization of beam orientations to improve dose distributions is explored. A dose-based objective function and a fast gradient technique are employed for optimizing the intensity profiles (inverse planning). An exhaustive search and fast simulated annealing techniques (FSA) are used to optimize beam orientations. However, to keep computation times reasonable, the intensity profiles for each beam arrangement are still optimized using inverse planning. A pencil beam convolution algorithm is employed for dose calculation. All calculations are performed in three-dimensional (3D) geometry for 15 MV photons. DVHs, dose displays, TCP, NTCP, and biological score functions are used for evaluation of treatment plans. It is shown that for the prostate case presented here, the minimum required number of equiangular beams depends on the prescription dose level and ranges from three beams for 70 Gy plans to seven to nine beams for 81 Gy plans. For the highest dose level (81 Gy), beam orientations are optimized and compared to equiangular spaced arrangements. It is shown that (1) optimizing beam orientations is most valuable for a small numbers of beams (< or = 5) and the gain diminishes rapidly for higher numbers of beams; (2) if sensitive structures (for example rectum) are partially enclosed by the target volume, beams coming from their direction tend to be preferable, since they allow greater control over dose distributions; (3) while FSA and an exhaustive search lead to the same results, computation times using FSA are reduced by two orders of magnitude to clinically acceptable values. Moreover, characteristics of and demands on biology-based and dose-based objective functions for optimization of intensity-modulated treatments are discussed.

[Unemployment of elderly employees]. / Arbeitslosigkeit älterer Arbeitnehmer.

Due to social security provisions and collective bargaining agreements, older employees are less frequently confronted with unemployment in comparison with other age groups in the labour force. In September 1984, 422,000 older workers aged 50 years and over were unemployed. To this figure an additional 250,000 older workers must be added, who are no longer registered as unemployed but nevertheless would be interested in finding another job. Only in exceptional cases do the older unemployed find permanent jobs with the help of labour exchange or by their own initiative. A proportion of roughly 80% of the older unemployed aged 50 plus is not re-integrated into the working process before retirement. Older unemployed workers suffer particularly from the financial and perhaps even to a greater extent from the psychological effects of unemployment. In a situation, in which renumerated employment is no longer available, they pass through a rather long period of re-orientation towards a meaningful life.