Nanocolloidal hydrogel mimics the structure and nonlinear mechanical properties of biological fibrous networks.

Fibrous networks formed by biological polymers such as collagen or fibrin exhibit nonlinear mechanical behavior. They undergo strong stiffening in response to weak shear and elongational strains, but soften under compressional strain, in striking difference with the response to the deformation of flexible-strand networks formed by molecules. The nonlinear properties of fibrous networks are attributed to the mechanical asymmetry of the constituent filaments, for which a stretching modulus is significantly larger than the bending modulus. Studies of the nonlinear mechanical behavior are generally performed on hydrogels formed by biological polymers, which offers limited control over network architecture. Here, we report an engineered covalently cross-linked nanofibrillar hydrogel derived from cellulose nanocrystals and gelatin. The variation in hydrogel composition provided a broad-range change in its shear modulus. The hydrogel exhibited both shear-stiffening and compression-induced softening, in agreement with the predictions of the affine model. The threshold nonlinear stress and strain were universal for the hydrogels with different compositions, which suggested that nonlinear mechanical properties are general for networks formed by rigid filaments. The experimental results were in agreement with an affine model describing deformation of the network formed by rigid filaments. Our results lend insight into the structural features that govern the nonlinear biomechanics of fibrous networks and provide a platform for future studies of the biological impact of nonlinear mechanical properties.

Fibrous hydrogels under biaxial confinement.

Confinement of fibrous hydrogels in narrow capillaries is of great importance in biological and biomedical systems. Stretching and uniaxial compression of fibrous hydrogels have been extensively studied; however, their response to biaxial confinement in capillaries remains unexplored. Here, we show experimentally and theoretically that due to the asymmetry in the mechanical properties of the constituent filaments that are soft upon compression and stiff upon extension, filamentous gels respond to confinement in a qualitatively different manner than flexible-strand gels. Under strong confinement, fibrous gels exhibit a weak elongation and an asymptotic decrease to zero of their biaxial Poisson's ratio, which results in strong gel densification and a weak flux of liquid through the gel. These results shed light on the resistance of strained occlusive clots to lysis with therapeutic agents and stimulate the development of effective endovascular plugs from gels with fibrous structures for stopping vascular bleeding or suppressing blood supply to tumors.

Cleavable Comonomers for Chemically Recyclable Polystyrene: A General Approach to Vinyl Polymer Circularity.

Many common polymers, especially vinyl polymers, are inherently difficult to chemically recycle and are environmentally persistent. The introduction of low levels of cleavable comonomer additives into existing vinyl polymerization processes could facilitate the production of chemically deconstructable and recyclable variants with otherwise equivalent properties. Here, we report thionolactones that serve as cleavable comonomer additives for the chemical deconstruction and recycling of vinyl polymers prepared through free radical polymerization, using polystyrene (PS) as a model example. Deconstructable PS of different molar masses (∼20-300 kDa) bearing varied amounts of statistically incorporated thioester backbone linkages (2.5-55 mol %) can be selectively depolymerized to yield well-defined thiol-terminated fragments (<10 kDa) that are suitable for oxidative repolymerization to generate recycled PS of nearly identical molar mass to the parent material, in good yields (80-95%). A theoretical model is provided to generalize this molar mass memory effect. Notably, the thermomechanical properties of deconstructable PS bearing 2.5 mol % of cleavable linkages and its recycled product are similar to those of virgin PS. The additives were also shown to be effective for deconstruction of a cross-linked styrenic copolymer and deconstruction and repolymerization of a polyacrylate, suggesting that cleavable comonomers may offer a general approach toward circularity of many vinyl (co)polymers.

Biomimetic hydrogel supports initiation and growth of patient-derived breast tumor organoids.

Patient-derived tumor organoids (PDOs) are a highly promising preclinical model that recapitulates the histology, gene expression, and drug response of the donor patient tumor. Currently, PDO culture relies on basement-membrane extract (BME), which suffers from batch-to-batch variability, the presence of xenogeneic compounds and residual growth factors, and poor control of mechanical properties. Additionally, for the development of new organoid lines from patient-derived xenografts, contamination of murine host cells poses a problem. We propose a nanofibrillar hydrogel (EKGel) for the initiation and growth of breast cancer PDOs. PDOs grown in EKGel have histopathologic features, gene expression, and drug response that are similar to those of their parental tumors and PDOs in BME. In addition, EKGel offers reduced batch-to-batch variability, a range of mechanical properties, and suppressed contamination from murine cells. These results show that EKGel is an improved alternative to BME matrices for the initiation, growth, and maintenance of breast cancer PDOs.

Microfluidic Arrays of Breast Tumor Spheroids for Drug Screening and Personalized Cancer Therapies.

One of the obstacles limiting progress in the development of effective cancer therapies is the shortage of preclinical models that capture the dynamic nature of tumor microenvironments. Interstitial flow strongly impacts tumor response to chemotherapy; however, conventional in vitro cancer models largely disregard this key feature. Here, a proof of principle microfluidic platform for the generation of large arrays of breast tumor spheroids that are grown under close-to-physiological flow in a biomimetic hydrogel is reported. This cancer spheroids-on-a-chip model is used for time- and labor-efficient studies of the effects of drug dose and supply rate on the chemosensitivity of breast tumor spheroids. The capability to grow large arrays of tumor spheroids from patient-derived cells of different breast cancer subtypes is shown, and the correlation between in vivo drug efficacy and on-chip spheroid drug response is demonstrated. The proposed platform can serve as an in vitro preclinical model for the development of personalized cancer therapies and effective screening of new anticancer drugs.

Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal.

The organization of nanocolloidal liquid crystals in constrained geometries has fundamental and practical importance, since under confinement, liquid crystals contain stable topological defects that can serve as templates for nanoparticle organization. Three-dimensional confinement of cholesteric (Ch) liquid crystals formed by cellulose nanocrystals (CNCs) have been extensively studied; however, their two-dimensional confinement remains under-investigated. Here, we report the results of systematic experimental studies of two-dimensional confinement of Ch-CNC liquid crystal in cylindrical capillaries with varying inner diameters. Confinement resulted in phase separation of the Ch-CNC liquid crystal into a Ch shell formed by concentric CNC pseudolayers with the helicoidal axis perpendicular to the inner surface of the capillary walls, and a micrometer-diameter isotropic core thread running parallel to the long axis of the capillary. The morphology of the confined Ch-CNC liquid crystal varied when progressively increasing the degree confinement. Finally, we show that phase separation of the Ch-CNC liquid crystal into a Ch shell and an isotropic core is preserved in flexible capillary tubing, suggesting the applicability of this system for the fabrication of flexible optical waveguides.

Nanofibrillar Hydrogel Recapitulates Changes Occurring in the Fibrotic Extracellular Matrix.

Fibrosis is a pathological condition that leads to excessive deposition of collagen and increased tissue stiffness. Understanding the mechanobiology of fibrotic tissue necessitates the development of effective in vitro models that recapitulate its properties and structure; however, hydrogels that are currently used for this purpose fail to mimic the filamentous structure and mechanical properties of the fibrotic extracellular matrix (ECM). Here, we report a nanofibrillar hydrogel composed of cellulose nanocrystals and gelatin, which addresses this challenge. By altering the composition of the hydrogel, we mimicked the changes in structure, mechanical properties, and chemistry of fibrotic ECM. Furthermore, we decoupled the variations in hydrogel structure, properties, and ligand concentration. We demonstrate that this biocompatible hydrogel supports the three-dimensional culture of cells relevant to fibrotic diseases. This versatile hydrogel can be used for in vitro studies of fibrosis of different tissues, thus enabling the development of novel treatments for fibrotic diseases.

Matrix Stiffness-Regulated Growth of Breast Tumor Spheroids and Their Response to Chemotherapy.

Interactions between tumor cells and the extracellular matrix (ECM) are an important factor contributing to therapy failure in cancer patients. Current in vitro breast cancer spheroid models examining the role of mechanical properties on spheroid response to chemotherapy are limited by the use of two-dimensional cell culture, as well as simultaneous variation in hydrogel matrix stiffness and other properties, e.g., hydrogel composition, pore size, and cell adhesion ligand density. In addition, currently used hydrogel matrices do not replicate the filamentous ECM architecture in a breast tumor microenvironment. Here, we report a collagen-alginate hydrogel with a filamentous architecture and a 20-fold variation in stiffness, achieved independently of other properties, used for the evaluation of estrogen receptor-positive breast cancer spheroid response to doxorubicin. The variation in hydrogel mechanical properties was achieved by altering the degree of cross-linking of alginate molecules. We show that soft hydrogels promote the growth of larger MCF-7 tumor spheroids with a lower fraction of proliferating cells and enhance spheroid resistance to doxorubicin. Notably, the stiffness-dependent chemotherapeutic response of the spheroids was temporally mediated: it became apparent at sufficiently long cell culture times, when the matrix stiffness has influenced the spheroid growth. These findings highlight the significance of decoupling matrix stiffness from other characteristics in studies of chemotherapeutic resistance of tumor spheroids and in development of drug screening platforms.

Colloidal stability of nanoparticles stabilized with mixed ligands in solvents with varying polarity.

Colloidal stability of nanoparticles (NPs) strongly influences their synthesis, processing, and applications. For gold NPs stabilized with cetyl trimethylammonium bromide (CTAB) and polymer ligands we show that gradual increase in polarity of the water/aprotic solvent mixture leads to stabilization-aggregation-stabilization-aggregation transitions. We propose that these transitions are mediated by structural rearrangements of the CTAB layer on the NP surface.

Nanoparticle-laden droplets of liquid crystals: Interactive morphogenesis and dynamic assembly.

Defects in liquid crystals serve as templates for nanoparticle (NP) organization; however, NP assembly in cholesteric (Ch) liquid crystals is only beginning to emerge. We show interactive morphogenesis of NP assemblies and a Ch liquid crystalline host formed by cellulose nanocrystals (CNCs), in which both the host and the guest experience marked changes in shape and structure as a function of concentration. At low NP loading, Ch-CNC droplets exhibit flat-ellipsoidal packing of Ch pseudolayers, while the NPs form a toroidal ring- or two cone-shaped assemblies at droplet poles. Increase in NP loading triggers reversible droplet transformation to gain a core-shell morphology with an isotropic core and a Ch shell, with NPs partitioning in the core and in disclinations. We show programmable assembly of droplets carrying magnetic NPs. This work offers a strategy for NP organization in Ch liquid crystals, thus broadening the spectrum of architectures of soft nanostructured materials.

Patterning of Structurally Anisotropic Composite Hydrogel Sheets.

Compositional and structural patterns play a crucial role in the function of many biological tissues. In the present work, for nanofibrillar hydrogels formed by chemically cross-linked cellulose nanocrystals (CNC) and gelatin, we report a microextrusion-based 3D printing method to generate structurally anisotropic hydrogel sheets with CNCs aligned in the direction of extrusion. We prepared hydrogels with a uniform composition, as well as hydrogels with two different types of compositional gradients. In the first type of gradient hydrogel, the composition of the sheet varied parallel to the direction of CNC alignment. In the second hydrogel type, the composition of the sheet changed orthogonally to the direction of CNC alignment. The hydrogels exhibited gradients in structure, mechanical properties, and permeability, all governed by the compositional patterns, as well as cytocompatibility. These hydrogels have promising applications for both fundamental research and for tissue engineering and regenerative medicine.

Shear-Induced Alignment of Anisotropic Nanoparticles in a Single-Droplet Oscillatory Microfluidic Platform.

Flow-induced alignment of shape-anisotropic colloidal particles is of great importance in fundamental research and in the fabrication of structurally anisotropic materials; however, rheo-optical studies of shear-induced particle orientation are time- and labor-intensive and require complicated experimental setups. We report a single-droplet oscillatory microfluidic strategy integrated with in-line polarized light imaging as a strategy for studies of shear-induced alignment of rod-shape nanoparticles. Using an oscillating droplet of an aqueous isotropic suspension of cellulose nanocrystals (CNCs), we explore the effect of the shear rate and suspension viscosity on the flow-induced CNC alignment and subsequent relaxation to the isotropic state. The proposed microfluidic strategy enables high-throughput studies of shear-induced orientations in structured liquid under precisely controlled experimental conditions. The results of such studies can be used in the development of structure-anisotropic materials.

Injectable Shear-Thinning Fluorescent Hydrogel Formed by Cellulose Nanocrystals and Graphene Quantum Dots.

In the search for new building blocks of nanofibrillar hydrogels, cellulose nanocrystals (CNCs) have attracted great interest because of their sustainability, biocompatibility, ease of surface functionalization, and mechanical strength. Making these hydrogels fluorescent extends the range of their applications in tissue engineering, bioimaging, and biosensing. We report the preparation and properties of a multifunctional hydrogel formed by CNCs and graphene quantum dots (GQDs). We show that although CNCs and GQDs are both negatively charged, hydrogen bonding and hydrophobic interactions overcome the electrostatic repulsion between these nanoparticles and yield a physically cross-linked hydrogel with tunable mechanical properties. Owing to their shear-thinning behavior, the CNC-GQD hydrogels were used as an injectable material in 3D printing. The hydrogels were fluorescent and had an anisotropic nanofibrillar structure. The combination of these advantageous properties makes this hybrid hydrogel a promising material and fosters the development of new manufacturing methods such as 3D printing.

Periodic assembly of nanoparticle arrays in disclinations of cholesteric liquid crystals.

An important goal of the modern soft matter science is to discover new self-assembly modalities to precisely control the placement of small particles in space. Spatial inhomogeneity of liquid crystals offers the capability to organize colloids in certain regions such as the cores of the topological defects. Here we report two self-assembly modes of nanoparticles in linear defects-disclinations in a lyotropic colloidal cholesteric liquid crystal: a continuous helicoidal thread and a periodic array of discrete beads. The beads form one-dimensional arrays with a periodicity that matches half a pitch of the cholesteric phase. The periodic assembly is governed by the anisotropic surface tension and elasticity at the interface of beads with the liquid crystal. This mode of self-assembly of nanoparticles in disclinations expands our ability to use topological defects in liquid crystals as templates for the organization of nanocolloids.

Temperature-Responsive Nanofibrillar Hydrogels for Cell Encapsulation.

Natural extracellular matrices often have a filamentous nature, however, only a limited number of artificial extracellular matrices have been designed from nanofibrillar building blocks. Here we report the preparation of temperature-responsive nanofibrillar hydrogels from rod-shaped cellulose nanocrystals (CNCs) functionalized with a copolymer of N-isopropylacrylamide and N,N'-dimethylaminoethyl methacrylate. The composition of the copolymer was tuned to achieve gelation of the suspension of copolymer-functionalized CNCs at 37 °C in cell culture medium and gel dissociation upon cooling it to room temperature. The mechanical properties and the structure of the hydrogel were controlled by changing copolymer composition and the CNC-to-copolymer mass ratio. The thermoreversible gels were used for the encapsulation and culture of fibroblasts and T cells and showed low cytotoxicity. Following cell culture, the cells were released from the gel by reducing the temperature, thus, enabling further cell characterization. These results pave the way for the generation of injectable temperature-responsive nanofibrillar hydrogels. The release of cells following their culture in the hydrogels would enable enhanced cell characterization and potential transfer in a different cell culture medium.

Colloidal cholesteric liquid crystal in spherical confinement.

The organization of nanoparticles in constrained geometries is an area of fundamental and practical importance. Spherical confinement of nanocolloids leads to new modes of packing, self-assembly, phase separation and relaxation of colloidal liquids; however, it remains an unexplored area of research for colloidal liquid crystals. Here we report the organization of cholesteric liquid crystal formed by nanorods in spherical droplets. For cholesteric suspensions of cellulose nanocrystals, with progressive confinement, we observe phase separation into a micrometer-size isotropic droplet core and a cholesteric shell formed by concentric nanocrystal layers. Further confinement results in a transition to a bipolar planar cholesteric morphology. The distribution of polymer, metal, carbon or metal oxide nanoparticles in the droplets is governed by the nanoparticle size and yields cholesteric droplets exhibiting fluorescence, plasmonic properties and magnetic actuation. This work advances our understanding of how the interplay of order, confinement and topological defects affects the morphology of soft matter.