Visible light-promoted C(sp3)-H α-carbamoylation of cyclic ethers with isocyanides.

A protocol exploiting isocyanides as carbamoylating agents for the α-C(sp3)-H functionalization of cyclic ethers has been optimized via a combined visible light-driven hydrogen atom transfer/Lewis acid-catalyzed approach. The isocyanide substrate scope revealed an exquisite functional group compatibility (18 examples, with yields up to 99%). Both radical and polar trapping, kinetic isotopic effect and real-time NMR studies support the mechanistic hypothesis and provide insightful details for the design of new chemical processes involving the generation of oxocarbenium ions.

Photodegradation of cannabidiol (CBD) and Δ9-THC in cannabis plant material.

Δ9-THC, the psychotropic cannabinoid in Cannabis sativa L., for many years has been the focus of all the pharmacological attention as the main promising principle of the plant. Recently, however, cannabidiol (CBD) has brought a sudden change in the scenario, exponentially increasing the interest in pharmacology as the main non-psychotropic cannabinoid with potential therapeutic, cosmetical and clinical applications. Although the reactivity of CBD and Δ9-THC has been considered, little attention has been paid to the possible photodegradation of these cannabinoids in the vegetal matrix and the data available in the literature are, in some cases, contradictory. The aim of the present work is to provide a characterization of the photochemical behaviour of CBD and Δ9-THC in three cannabis chemotypes, namely I (Δ9-THC 2.50%w/w), II (CBD:Δ9-THC 5.82%w/w:3.19%w/w) and III (CBD 3.02%w/w).

Visible photons as ideal reagents for the activation of coloured organic compounds.

In recent decades, the traceless nature of visible photons has been exploited for the development of efficient synthetic strategies for the photoconversion of colourless compounds, namely, photocatalysis, chromophore activation, and the formation of an electron donor/acceptor (EDA) complex. However, the use of photoreactive coloured organic compounds is the optimal strategy to boost visible photons as ideal reagents in synthetic protocols. In view of such premises, the present review aims to provide its readership with a collection of recent photochemical strategies facilitated via direct light absorption by coloured molecules. The protocols have been classified and presented according to the nature of the intermediate/excited state achieved during the transformation.

Metal-free photocatalytic cross-electrophile coupling enables C1 homologation and alkylation of carboxylic acids with aldehydes.

In contemporary drug discovery, enhancing the sp3-hybridized character of molecular structures is paramount, necessitating innovative synthetic methods. Herein, we introduce a deoxygenative cross-electrophile coupling technique that pairs easily accessible carboxylic acid-derived redox-active esters with aldehyde sulfonyl hydrazones, employing Eosin Y as an organophotocatalyst under visible light irradiation. This approach serves as a versatile, metal-free C(sp3)-C(sp3) cross-coupling platform. We demonstrate its synthetic value as a safer, broadly applicable C1 homologation of carboxylic acids, offering an alternative to the traditional Arndt-Eistert reaction. Additionally, our method provides direct access to cyclic and acyclic ß-arylethylamines using diverse aldehyde-derived sulfonyl hydrazones. Notably, the methodology proves to be compatible with the late-stage functionalization of peptides on solid-phase, streamlining the modification of intricate peptides without the need for exhaustive de-novo synthesis.

Molecularly Imprinted Polymer-based voltammetric sensor for amino acids/indazole derivatives synthetic cannabinoids detection.

BACKGROUND: Synthetic cannabinoids (SCs) are a broad class of illicit drugs that are classified according to the chemical structure of the aromatic core that they present (i.e., indole, imidazole, pyrrole) and their detection is still a challenge, despite their widespread diffusion. The identification of a specific class of SC in complex matrices, such as real samples with a rapid, economic analytical device useable directly in the field, is highly desirable, as it can provide immediate and reliable information that eventually addresses more targeted analyses. RESULTS: The present paper proposes a Molecularly Imprinted Polymer (MIP)-based voltammetric sensor for the rapid and selective detection of indazole-type SCs. In this context, a polyacrylate-based MIP was used to functionalize a Pt electrode. The MIP composition was optimized through a Design of Experiments approach, and for the sake of safety, a non-psychotropic compound structurally related to the selected SCs was employed as the template in the MIP formulation. A complete characterization of the electrochemical behavior of the selected SCs was performed, and differential pulse voltammetry (DPV) in acetonitrile/lithium perchlorate 0.1 M was the technique applied for their quantification. LOD around 0.01 mM and linearity up to 0.8 mM were found. Comparison with the non-imprinted (NIP) modified and bare electrodes showed better selectivity and reproducibility of the MIP-based sensor. Recovery tests (in the 70-115 % range) were performed on simulated pills and smoking mixtures to test the reliability of the proposed method. SIGNIFICANCE: The method proposed allows the identification and quantification of indazole-based SCs as a class in complex matrices. Due to the selectivity of the obtained device, no clean-up of the sample before analyses is needed. For the same reason, the interference of cutting substances and natural cannabinoids was negligible.

Boosting Energy-Transfer Processes via Dispersion Interactions.

The generation of open-shell intermediates under mild conditions has opened broad synthetic opportunities during this century. However, these reactive species often require a case specific and tailored tuning of experimental parameters in order to efficiently convert substrates into products. We report a general approach that can overcome these ubiquitous limitations for several visible-light promoted energy-transfer processes. The use of either naphthalene (5-20 equiv.) or simple binaphthyl derivatives (10-30 mol %) greatly increases their efficiency, giving rise to a new strategy for catalysis. The trend is consistent among different media, photocatalysts, light sources and substrates, allowing one to improve existing methods, to more easily optimize conditions for new ones, and, moreover, to disclose otherwise inaccessible reaction pathways.

Visible-Light-Mediated Divergent and Regioselective Vicinal Difunctionalization of Styrenes with Arylazo Sulfones.

Activated by visible light, arylazo sulfones can serve as multifaceted reactants and are employed in diazenylation, sulfonylation, and arylation reactions under (photo)catalyst-free conditions. Such versatile reactivity enabled us to develop an operationally simple, regioselective, and tunable difunctionalization of styrenes with arylazo sulfones to produce α-sulfonyl arylhydrazones and 1,2-alkoxyarylated products in moderate to excellent yields. Furthermore, such difunctionalized products have been exploited as key building blocks for the synthesis of various heterocycles.

Selective Nsp2 - and Csp2 - Photografting of Au-Surface by Aryldiazonium Salts and Arylazo Sulfonates.

Arylazo sulfonates (Ar-N=N-SO3 Na) have been found to undergo photografting on gold surface through both Au-Nsp2 - and Au-Csp2 - bond formation. The functionalized materials have been fully characterized by infrared reflection absorption spectroscopy (IRRAS), Raman, XPS, DFT calculations and UV-Vis absorption spectroscopy. These methods permit to evidence aromatic substituents (IRRAS), the Au-N=N signature (Raman and XPS spectroscopy), and the bond dissociation energy values of the two linkages (DFT calculation). The grafting proceeds through two competitive paths, namely a stepwise reaction involving an aryl radical (for the formation of the Au-Ar bonds) and a concerted reaction on the surface of gold (for Au-N=N-Ar bond formation). The occurrence of an aryl radical upon irradiation has been fully evidenced by EPR spectroscopy. Finally, E/Z photoisomerisation of the N=N bonds present on prepared few layer films has been observed by means of UV-Vis absorption spectroscopy.

Effect of Arylazo Sulfones on DNA: Binding, Cleavage, Photocleavage, Molecular Docking Studies and Interaction with A375 Melanoma and Non-Cancer Cells.

A set of arylazo sulfones, known to undergo N-S bond cleavage upon light exposure, has been synthesized, and their activity in the dark and upon irradiation towards DNA has been investigated. Their interaction with calf-thymus DNA has been examined, and the significant affinity observed (most probably due to DNA intercalation) was analyzed by means of molecular docking "in silico" calculations that pointed out polar contacts, mainly via the sulfonyl moiety. Incubation with plasmid pBluescript KS II revealed DNA cleavage that has been studied over time and concentration. UV-A irradiation considerably improved DNA damage for most of the compounds, whereas under visible light the effect was slightly lower. Moving to in vitro experiments, irradiation was found to slightly enhance the death of the cells in the majority of the compounds. Naphthylazosulfone 1 showed photo-disruptive effect under UV-A irradiation (IC50 ~13 µΜ) followed by derivatives 14 and 17 (IC50 ~100 µΜ). Those compounds were irradiated in the presence of two non-cancer cell lines and were found equally toxic only upon irradiation and not in the dark. The temporal and spatial control of light, therefore, might provide a chance for these novel scaffolds to be useful for the development of phototoxic pharmaceuticals.

Friedel-Crafts arylation of aldehydes with indoles utilizing arylazo sulfones as the photoacid generator.

A versatile, inexpensive and sustainable protocol for the preparation of valuable bis-indolyl methanes via visible light-mediated, metal-free Friedel-Crafts arylation has been developed. The procedure, that exploits the peculiar behavior of arylazo sulfones as non-ionic photoacid generators (PAGs), was applied to the conversion of a variety of aliphatic and aromatic aldehydes into diarylmethanes in good to highly satisfactory yields, employing a low-catalyst loading (0.5 mol%) and irradiation at 456 nm.

A General Metal-Free Protocol for the Visible-Light-Driven Protection of Carbonyls.

The protection of a carbonyl is a standard procedure to mask the reactivity of this group towards nucleophiles and reductants. The present work pointed out the potentialities of arylazo sulfones as non-ionic photoacid generators (PAGs) to promote the efficient conversion of aldehydes and ketones into acetals, ketals, and 1,3-oxazolidines upon visible-light irradiation. This approach employed mild conditions and exhibited an easy scalability and a broad scope (80 examples included).

Arylazo Sulfones as Nonionic Visible-Light Photoacid Generators.

The selective visible-light-driven generation of a weak acid (sulfinic acid, in nitrogen-purged solutions) or a strong acid (sulfonic acid, in oxygen-purged solutions) by using shelf-stable arylazo sulfones was developed. These sulfones were then used for the green, smooth, and efficient photochemical catalytic protection of several (substituted) alcohols (and phenols) as tetrahydropyranyl ethers or acetals.

Tunable physics through coordination chemistry: formation on oxide surface of Ti and Al chelates with 3-hydroxyflavone capable of electron injection and light emission.

The optoelectronic features of 3-hydroxyflavone (3HF) self-assembled on the surface of an n-type semiconducting metal oxide (TiO2) and an insulator (Al2O3) are herein investigated. 3HF molecules use the coordinatively unsaturated metal ions present on the oxide surface to form metal complexes, which exhibit different behaviors upon light irradiation, depending on the nature of the metal ion. Specifically, we show that the photoluminescence of the surface species can be modulated according to the chemical properties of the complex (i.e. the binding metal ion), resulting in solid-state emitters in a high quantum yield (about 15%). Furthermore, photoinduced charge injection can be promoted or inhibited, providing a multifunctional hybrid system.

Alkyl Radical Generation via C-C Bond Cleavage in 2-Substituted Oxazolidines.

There is an urgent need to develop uncharged radical precursors to be activated under mild photocatalyzed conditions. 2-Substituted-1,3-oxazolidines (E ox < 1.3 V vs SCE, smoothly prepared from the corresponding aldehydes) have been herein employed for the successful release of tertiary, α-oxy, and α-amido radicals under photo-organo redox catalysis. The reaction relies on the unprecedented C-C cleavage occurring from the radical cation of these heterocyclic derivatives. Such a protocol is applied to the visible-light-driven conjugate radical addition onto Michael acceptors and vinyl (hetero)arenes under mild metal-free conditions.

Visible Light-Driven, Gold(I)-Catalyzed Preparation of Symmetrical (Hetero)biaryls by Homocoupling of Arylazo Sulfones.

The preparation of symmetrical (hetero)biaryls via arylazo sulfones has been successfully carried out upon visible light irradiation in the presence of PPh3AuCl as the catalyst. The present protocol led to the efficient synthesis of a wide range of target compounds in an organic-aqueous solvent under photocatalyst-free conditions.

Diradicals Photogeneration from Chloroaryl-Substituted Carboxylic Acids.

With the aim of generating new, thermally inaccessible diradicals, potentially able to induce a double-strand DNA cleavage, the photochemistry of a set of chloroaryl-substituted carboxylic acids in polar media was investigated. The photoheterolytic cleavage of the Ar-Cl bond occurred in each case to form the corresponding triplet phenyl cations. Under basic conditions, the photorelease of the chloride anion was accompanied by an intramolecular electron-transfer from the carboxylate group to the aromatic radical cationic site to give a diradical species. This latter intermediate could then undergo CO2 loss in a structure-dependent fashion, according to the stability of the resulting diradical, or abstract a hydrogen atom from the medium. In aqueous environment at physiological pH (pH=7.3), both a phenyl cation and a diradical chemistry was observed. The mechanistic scenario and the role of the various intermediates (aryl cations and diradicals) involved in the process was supported by computational analysis.

Proton-controlled Action of an Imidazole as Electron Relay in a Photoredox Triad.

Electron relays play a crucial role for efficient light-induced activation by a photo-redox moiety of catalysts for multi-electronic transformations. Their insertion between the two units reduces detrimental energy transfer quenching while establishing at the same time unidirectional electron flow. This rectifying function allows charge accumulation necessary for catalysis. Mapping these events in photophysical studies is an important step towards the development of efficient molecular photocatalysts. Three modular complexes comprised of a Ru-chromophore, an imidazole electron relay function, and a terpyridine unit as coordination site for a metal ion were synthesized and the light-induced electron transfer events studied by laser flash photolysis. In all cases, formation of an imidazole radical by internal electron transfer to the oxidized chromophore was observed. The effect of added base evidenced that the reaction sequence depends strongly on the possibility for deprotonation of the imidazole function in a proton-coupled electron transfer process. In the complex with MnII present as a proxy for a catalytic site, a strongly accelerated decay of the imidazole radical together with a decreased rate of back electron transfer from the external electron acceptor to the oxidized complex was observed. This transient formation of an imidazolyl radical is clear evidence for the function of the imidazole group as an electron relay. The implication of the imidazole proton and the external base for the kinetics and energetics of the electron trafficking is discussed.

Recent Advances in Light-Induced Selenylation.

Selenium-containing organic molecules have recently found a plethora of applications, ranging from organic synthesis to pharmacology and material sciences. In view of these concepts, the development of mild, efficient, and general protocols for the formation of C-Se bonds is desirable, and light induced approaches are appealing ways. The aim of this Review is to provide the reader with the most recent examples of light promoted selenylation processes.

Aryl-Cl vs heteroatom-Si bond cleavage on the route to the photochemical generation of σ,π-heterodiradicals.

The photochemistry of aryl chlorides having a X-SiMe3 group (X = O, NR, S, SiMe2) tethered to the aromatic ring has been investigated in detail, with the aim to generate valuable Ï­,π-heterodiradicals. Two competitive pathways arising from the excited triplet state of the aromatics have been observed, namely heterolysis of the aryl-chlorine bond and homolysis of the X-silicon bond. The former path is found in chlorinated phenols and anilines, whereas the latter is exclusive in the case of silylated thiophenols and aryl silanes. A combined experimental/computational approach was pursued to explain such a photochemical behavior.Graphical abstract.