Effect of different surface treatments on the repair bond strength between aged and new alkasite based restorative material.

Background: This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite based restorative material. Assessing different surface treatments provide insights in optimizing repair procedure that enables durability of the restoration, thus potentially benefitting clinical outcomes. Methods: A total of 48 alkasite based restorative material blocks, measuring 4 mm in depth and 4 mm in diameter, were prepared. The samples were randomly divided into 8 groups (n = 6) according to the surface treatment done. Group I: Surface preparation by bur; Group II: Surface treatment by laser; Group III: Application of 2-step etch and rinse adhesive (Adper Single Bond 2 adhesive),Group IV: Application of single step self-etch adhesive (Scotchbond Universal adhesive); Group V: Bur preparation followed by application of 2-step etch and rinse adhesive; Group VI: Bur preparation followed by application of single step self-etch adhesive; Group VII: Laser preparation followed by application of 2-step etch and rinse adhesive; and Group VIII: Laser preparation followed by application of single step self-etch adhesive. Post-surface preparation, all the specimens were restored with newly mixed alkasite material. Repair bond strength measurements were assessed with universal testing machine. Shapiro-Wilk and Levene's tests were used to check normality and Homogeneity of variance. ANOVA with post-hoc Games-Howell test and two-way ANOVA with post-hoc Bonferroni test was performed to evaluate the influence of surface preparation on the repair bond strength. Results: Using a 2-step etch and rinse adhesive resulted in a higher repair bond strength (26.05±2.12) compared to other surface treatments. In contrast, roughening of the surface with burs led to lowest repair bond strength (17.06±3.29) (P=0.02). Conclusion: Application of 2-step etch and rinse adhesive to the existing alkasite based restorative material provides superior bonding with the newly added alkasite based restorative material.

Effect of polishing technique and immersion in beverages on color stability of nanoceramic composites.

BACKGROUND: Polishing of dental composite restorations to achieve a highly smooth and reflective surface not only enhances esthetics but also their color stability and improves resistance to staining. The objective of this study was to evaluate the effect of beverages on the color stability of nanoceramic composites polished using different techniques. METHODS: 80 samples of ceram. X SphereTEC one were prepared by condensing the material into a stainless-steel split mold and divided randomly into two groups. Group I was subjected to polishing using Sof-Lex system™ disks, and Group II was kept unpolished. Each group was subdivided into four sub-groups of 10 samples each. Each subgroup samples were immersed into designated beverages (Tropicana orange juice, Coco-cola, Nescafe coffee, and distilled water) for a duration of 15mins/day for 15 days. The color of all specimens before immersion, one day, and 15 days after immersion was measured using a Spectrophotometer. RESULTS: Significant staining of the material was found with cola drinks and coffee compared to orange juice and distilled water. Polished material showed better resistance to staining by various beverages compared to control group. CONCLUSION: Nanoceramic composites exhibited superior color stability after polishing with Sof-Lex system™. Among the beverages, coco-cola significantly altered the color of the composite.

Survival of human periodontal ligament fibroblast cells in Cornisol and HBSS for transportation of avulsed teeth: a comparative ex vivo study.

OBJECTIVE: Viability of periodontal ligament fibroblast cells (PDFC) is one of the key factors in determining the success of replantation of avulsed teeth. Extra-oral time and transport media are closely related to the same. The present study aims to evaluate and compare the efficiency of Cornisol, Hank's balanced salt solution (HBSS) and normal saline in preserving the viability of PDFC. MATERIALS AND METHODS: The human PDFC were isolated from primary culture from freshly extracted human premolars. Effect of Cornisol, HBSS and normal saline on viability of isolated PDFC was assessed using standard MTT assay. The cells were exposed to the experimental solutions (Cornisol/HBSS/normal saline) for varying time points (30 min, 1 h, 24 h, 48 h and 96 h) and viability was determined by colorimetric MTT method by quantifying the amount of formazan crystal formed (optical density). Experiment was performed in triplicates and the data were subjected to statistical analysis. RESULTS: Statistical analysis was performed using the Kruskal-Wallis ANOVA with post hoc Bonferroni's test with a significance level of p value ≤.05. Cornisol ≥ HBSS > saline. CONCLUSION: Cornisol can be used as a storage media for avulsed teeth and is significantly more effective than HBSS in maintaining the periodontal ligament cell viability at tested time intervals.

Effect of Thermocycling on the Colour Stability of Aesthetic Restorative Materials: An in-vitro Spectrophotometric Analysis

Abstract Objective: To compare the color stability of Cention N, Fuji IX GP Extra, and Fuji IX GP after thermocycling. Material and Methods: Ten discs of each material of dimension 10 x 1 mm were prepared using a split mold. The preparations of the specimens were done according to the powder/liquid ratio as recommended by the manufacturers [4.6:1, 3.4:1 and 3.6:1 for the groups I, II, and III, respectively]. After setting, the samples were retrieved, and the thickness of each specimen was measured using a micrometer at five different locations. The specimens with variations in thickness, porosity or cracks were discarded and thus not included in the study. The selected specimens were stored in distilled water for 24 hours prior to testing. The prepared specimens were thermocycled at 5°C and 55°C, with a dwell time of 15 seconds for 250 or 500 cycles. Subsequently, the color parameters of the discs were measured using a spectrophotometer. The data were analyzed using two way ANOVA test, and a p-value <0.001 was considered. Results: Thermocycling resulted in changes in the color of both Glass Ionomer cement and Cention N (p<0.001). Among the materials tested, Cention N showed superior color stability. Conclusion: Cention N exhibited better color stability compared to Glass ionomer cements.

Comparative evaluation of the accuracy of two electronic apex locators in determining the working length in teeth with simulated apical root resorption: An in vitro study.

INTRODUCTION: Accurate determination of working length (WL) is a critical factor for endodontic success. This is commonly achieved using an apex locator which is influenced by the presence or absence of the apical constriction. Hence, this study was done to compare the accuracy of two generations of apex locators in teeth with simulated apical root resorption. MATERIALS AND METHODS: Forty maxillary central incisors were selected and after access preparation, were embedded in an alginate mold. On achieving partial set, teeth were removed, and a 45° oblique cut was made at the apex. The teeth were replanted and stabilized in the mold, and WL was determined using two generations of apex locators (Raypex 5 and Apex NRG XFR). Actual length of teeth (control) was determined by visual method. STATISTICAL ANALYSIS: Results were subjected to statistical analysis using the paired t-test. RESULTS: Raypex 5 and Apex NRG was accurate for only 33.75% and 23.75% of samples, respectively. However, with ±0.5 mm acceptance limit, they showed an average accuracy of 56.2% and 57.5%, respectively. There was no significant difference in the accuracy between the two apex locators. CONCLUSION: Neither of the two apex locators were 100% accurate in determining the WL.