RESUMO
Fiber-reinforced polymer (FRP) composites play a vital role in the production of structural and semi-structural components for engineering applications. The drilling process is a commonly employed machining process for FRP composites to join the FRP structural elements. Usually, the FRP composites possess a heterogeneous nature because of their multi-layered structure, hybridization, and the presence of multi-phase materials. Hence, common problems like delaminations, fuzzing, buckling, cracking, matrix and fiber burning occur during the drilling operations. These problems cause dimensional inaccuracy, poor surface finish, and tool wear and reduce the mechanical strength of the composites. The optimum drilling parameters (drill geometry, speed, feed, and depth of cut) selection for the specific materials is good to achieve effective drilling performance and better surface quality of the holes. Yet, little study has been done on how all of these factors affect the size of the drilled hole. The majority of drilling studies on FRPCs in the past have focused on how to improve the hole quality by maximizing processing conditions, and there has been little discussion on the correlation between drilling conditions, physical properties, and production techniques. This is what motivated to review the characteristics and properties analysis of FRP composites. As a consequence of this research, it is anticipated that scientists and researchers would place a greater emphasis on the drilling characteristic of the workpieces made from FRPCs than on other attributes. This review clearly presents an overview of FRP composites drilling that had progressed from 2000 to 2021. The analysis of different drilling conditions and parameters like thrust force, drill geometry, temperature, speed, and feed also includes the post-drilling analysis through delaminations, thermal damage, and surface roughness. Furthermore, the recent developments in carbon, glass, and natural fiber reinforced polymer composites are studied with both conventional and nonconventional drilling techniques. Based on the above studies, some future challenges and conclusions are drawn from this review.
RESUMO
In recent years, efforts have been made to reduce deforestation to conserve the ecosystem. In the current scenario, agro-cultivated products are used instead of wood for engineering applications. Thus, natural lignocellulosic fibres are used as a reinforcing material and have been extremely attractive to industries and the scientific community during the past few decades. This study aimed to examine the use of natural fibres extracted from Typha angustata grass as reinforcement in polymer matrix composites. The density of the fibres was 1.015 g/cc. Chemical analysis confirmed that T. angustata fibres (TAFs) have a cellulose content of 73.54 wt%, a hemicellulose content of 10.11 wt%, a lignin content of 6.23 wt% and a wax content of 0.23 wt%. The crystallinity index (65.16 %) and crystalline size (6.40 nm) were identified by X-ray diffraction (XRD) analysis. The presence of functional groups in the TAFs was examined by employing Fourier-transform infrared spectroscopy (FTIR). The presence of cellulose at peak intensities of C2, C3 and C5 in the TAFs was confirmed using 13C nuclear magnetic resonance (NMR) spectroscopy. The single fibre tensile test revealed that the tensile strength was 665 ± 7 MPa and Young's modulus was 27.45 ± 3.46 GPa. The thermal stability of the TAFs was examined by thermogravimetric analysis (TGA), and the prominent peak was observed at 298.48 °C, with a kinetic activation energy of 67.99 kJ/mol. The surface roughness of the fibres was analysed by atomic force microscopy (AFM) with an accuracy of 1 nm. The above-mentioned outcomes indicated that the TAFs have desirable properties that are comparable to existing natural fibres and suggested to be utilised as the possible reinforcement to fabricate the fibre-reinforced polymer matrix composites.
Assuntos
Poaceae , Typhaceae , Poaceae/química , Ecossistema , Celulose/química , PolímerosRESUMO
Poly(vinyl alcohol) (PVA) is an excellent membrane-forming polymer and can be modified with potato starch and methyl acrylate monomers to obtain copolymers with improved physical and chemical properties. The study presents the synthesis of poly(vinyl alcohol)-g-starch-poly(methyl acrylate) PVA-g-St-g-PMA copolymers using microwave irradiation technique and potassium persulfate initiator. Solution casting and solvent evaporation methods were adopted for the fabrication of polyvinyl alcohol-g-starch-acrylamide composite membranes. The synthesized graft copolymer was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermal analysis. The modified nanocomposite membranes were showed very promising results with the parameters permeability and selectivity. The nanocomposite membranes exhibited the advantages of easy handling and reuse.