Comparison of grain cadmium and arsenic concentration between main and ratoon crop in rice ratooning system.

Rice ratooning system is becoming increasingly important for food security in China, however, information on grain cadmium (Cd) and arsenic (As) levels is lacking. We collected grain samples of main crop (MC) and ratoon crop (RC) from five sites, where the same eleven varieties were planted, and determined the Cd and As concentration in brown rice. Results showed that differences in grain Cd level between MC and RC were inconsistent across experimental sites, although the average value was comparable. In contrast, the grain As level was significantly higher in MC than in RC by 99.8% on average, which was consistent across all sites. Moreover, there was a significant positive correlation in grain Cd concentration between RC and MC. Overall, RC-produced rice is safer than MC with dramatically lower As concentration, and planting rice varieties with low Cd accumulation capacity is important for production of safe rice in rice ratooning system.

Physics-informed recurrent neural network for time dynamics in optical resonances.

Resonance structures and features are ubiquitous in optical science. However, capturing their time dynamics in real-world scenarios suffers from long data acquisition time and low analysis accuracy due to slow convergence and limited time windows. Here we report a physics-informed recurrent neural network to forecast the time-domain response of optical resonances and infer corresponding resonance frequencies by acquiring a fraction of the sequence as input. The model is trained in a two-step multi-fidelity framework for high-accuracy forecast, using first a large amount of low-fidelity physical-model-generated synthetic data and then a small set of high-fidelity application-specific data. Through simulations and experiments, we demonstrate that the model is applicable to a wide range of resonances, including dielectric metasurfaces, graphene plasmonics and ultra-strongly coupled Landau polaritons, where our model captures small signal features and learns physical quantities. The demonstrated machine-learning algorithm can help to accelerate the exploration of physical phenomena and device design under resonance-enhanced light-matter interaction.

InP high power monolithically integrated widely tunable laser and SOA array for hybrid integration.

We present a monolithic InP-based photonic integrated circuit (PIC) consisting of a widely tunable laser master oscillator feeding an array of integrated semiconductor optical amplifiers that are interferometrically combined on-chip in a single-mode waveguide. We demonstrate a stable and efficient on-chip coherent beam combination and obtain up to 240 mW average power from the monolithic PIC, with 30-50 kHz Schawlow-Townes linewidths and >180 mW average power across the extended C-band. We also explored hybrid integration of the InP-based laser and amplifier array PIC with a high quality factor silicon nitride microring resonator. We observe lasing based on gain from the interferometrically combined amplifier array in an external cavity formed via feedback from the silicon nitride microresonator chip; this configuration results in narrowing of the Schawlow-Townes linewidth to ∼3 kHz with 37.9 mW average power at the SiN output facet. This work demonstrates a new approach toward high power, narrow linewidth sources that can be integrated with on-chip single-mode waveguide platforms for potential applications in nonlinear integrated photonics.

Design of a broadband Ge1-xSix electro-absorption modulator based on the Franz-Keldysh effect with thermal tuning.

We present the design of an adiabatic taper coupled Ge1-xSix electro-absorption modulator, which is based on Franz-Keldysh effect. The device has an active region of 0.8×50 µm2, an extinction ratio of more than 6 dB and an insertion loss less than 3 dB at the wavelength of 1550 nm. The operating bandwidth can be broadened to more than 90 nm by an AlN block assisted heater with only 6.2 mW energy consumption. Moreover, the operating wavelength shift caused by material composition deviation can be compensated to the expected wavelength by thermal tuning. This design may play an important role in next-generation, high-density optical integrations for datacom and high-performance computing.

Effect of Yiqi Huayu Jiedu decoction on stages II and III gastric cancer: A multicenter, prospective, cohort study.

BACKGROUND: This study aimed to explore the effect of YHJD (Yiqi Huayu Jiedu decoction) in patients with stages II and III gastric cancer. METHODS: A multicenter, prospective, cohort study was conducted in Jiangsu Province Hospital of Traditional Chinese Medicine, Jiangsu Cancer Hospital, Nanjing Drum Tower Hospital, People's Liberation Army Bayi Hospital, Changzhou Traditional Chinese Medicine Hospital, Changzhou Tumor Hospital, Traditional Chinese Medicine Hospital of Kunshan, Yangzhou Hospital of Traditional Chinese Medicine, and Yixing Tumor Hospital. A total of 489 patients with stage II or III gastric cancer were enrolled after radical gastrectomy. Among them, 238 were included in the chemotherapy group (received chemotherapy alone) and 251 in the YHJD group (received chemotherapy combined with YHJD). The DFS (disease-free survival) rate, 5-year survival rate, quality of life, and traditional Chinese medicine (TCM) symptoms of the 2 groups were compared. RESULTS: The DFS curve of the YHJD group was higher than that of the chemotherapy group (P = .0042). The HR (hazard ratio) was 0.672, and its corresponding 95% CI (confidence interval) was 0.511 to 0.884. For stage II patients, the P value was .8323, which indicated that the difference was not significant. The risk HR was 0.938, and the corresponding 95% CI was 0.521 to 1.689. For stage III patients, the P value was .0072, indicating a statistically significant difference. The HR was 0.653, and the corresponding 95% CI was 0.477 to 0.893. The 5-year survival rate of the YHJD group was 85.29%, which was higher than that of the chemotherapy group (71.05%). Compared with the chemotherapy group, the YHJD group had better quality of life and lower TCM symptom scores. CONCLUSION: YHJD decoction is effective in improving DFS rate in patients with gastric cancer stage III after radical gastrectomy. Moreover, it can reduce the risk of recurrence and metastasis and improve the quality of life in patients with gastric cancer stage II or III after radical gastrectomy.

Characterizing pump line phase offset of a single-soliton Kerr comb by dual comb interferometry.

We report phase retrieval of a single-soliton Kerr comb using electric field cross-correlation implemented via dual-comb interferometry. The phase profile of the Kerr comb is acquired through the heterodyne beat between the Kerr comb and an electro-optic comb with a pre-characterized phase profile. The soliton Kerr comb has a nearly flat phase profile, and the pump line is observed to show a phase offset which depends on the pumping parameters. The experimental results are in agreement with numerical simulations.

Controlling evanescent waves using silicon photonic all-dielectric metamaterials for dense integration.

Ultra-compact, densely integrated optical components manufactured on a CMOS-foundry platform are highly desirable for optical information processing and electronic-photonic co-integration. However, the large spatial extent of evanescent waves arising from nanoscale confinement, ubiquitous in silicon photonic devices, causes significant cross-talk and scattering loss. Here, we demonstrate that anisotropic all-dielectric metamaterials open a new degree of freedom in total internal reflection to shorten the decay length of evanescent waves. We experimentally show the reduction of cross-talk by greater than 30 times and the bending loss by greater than 3 times in densely integrated, ultra-compact photonic circuit blocks. Our prototype all-dielectric metamaterial-waveguide achieves a low propagation loss of approximately 3.7±1.0 dB/cm, comparable to those of silicon strip waveguides. Our approach marks a departure from interference-based confinement as in photonic crystals or slot waveguides, which utilize nanoscale field enhancement. Its ability to suppress evanescent waves without substantially increasing the propagation loss shall pave the way for all-dielectric metamaterial-based dense integration.

High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators.

Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power-conversion efficiency. Here, we report the first coherent-transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB, while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.

50-GHz-spaced comb of high-dimensional frequency-bin entangled photons from an on-chip silicon nitride microresonator.

Quantum frequency combs from chip-scale integrated sources are promising candidates for scalable and robust quantum information processing (QIP). However, to use these quantum combs for frequency domain QIP, demonstration of entanglement in the frequency basis, showing that the entangled photons are in a coherent superposition of multiple frequency bins, is required. We present a verification of qubit and qutrit frequency-bin entanglement using an on-chip quantum frequency comb with 40 mode pairs, through a two-photon interference measurement that is based on electro-optic phase modulation. Our demonstrations provide an important contribution in establishing integrated optical microresonators as a source for high-dimensional frequency-bin encoded quantum computing, as well as dense quantum key distribution.

Observation of Breathing Dark Pulses in Normal Dispersion Optical Microresonators.

Breathers are localized waves in nonlinear systems that undergo a periodic variation in time or space. The concept of breathers is useful for describing many nonlinear physical systems including granular lattices, Bose-Einstein condensates, hydrodynamics, plasmas, and optics. In optics, breathers can exist in either the anomalous or the normal dispersion regimes, but they have only been characterized in the former, to our knowledge. Here, externally pumped optical microresonators are used to characterize the breathing dynamics of localized waves in the normal dispersion regime. High-Q optical microresonators featuring normal dispersion can yield mode-locked Kerr combs whose time-domain waveform corresponds to circulating dark pulses in the cavity. We show that with relatively high pump power these Kerr combs can enter a breathing regime, in which the time-domain waveform remains a dark pulse but experiences a periodic modulation on a time scale much slower than the microresonator round trip time. The breathing is observed in the optical frequency domain as a significant difference in the phase and amplitude of the modulation experienced by different spectral lines. In the highly pumped regime, a transition to a chaotic breathing state where the waveform remains dark-pulse-like is also observed, for the first time to our knowledge; such a transition is reversible by reducing the pump power.

Long-haul coherent communications using microresonator-based frequency combs.

Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent experiments have shown the potential of microresonator combs for replacing a multitude of WDM lasers with a single laser-pumped device. Previous demonstrations have however focused on short-distance few-span links reaching an impressive throughput at the expense of transmission distance. Here we report the first long-haul coherent communication demonstration using a microresonator-based comb source. We modulated polarization multiplexed (PM) quadrature phase-shift keying-data onto the comb lines allowing transmission over more than 6300 km in a single-mode fiber. In a second experiment, we reached beyond 700 km with the PM 16 quadrature amplitude modulation format. To the best of our knowledge, these results represent the longest fiber transmission ever achieved using an integrated comb source.

Direct soliton generation in microresonators.

We investigate, numerically and experimentally, the effect of thermo-optical (TO) chaos on soliton generation dynamics in microresonators. Numerical simulations that include the thermal dynamics show that the generated solitons can either survive or annihilate when the pump laser is scanned from blue to red and then stop at a fixed wavelength; the outcome is stochastic and is strongly related to the number of solitons generated. The random fluctuations of the cavity resonance occurring under TO chaos are also found to trigger delayed spontaneous soliton generation after the laser scan ends, which could enable soliton excitation with slow laser tuning speed. Stochastic soliton annihilation/survival, as well as delayed spontaneous soliton generation, is observed experimentally in a silicon-nitride microresonator.

Solasodine inhibits human colorectal cancer cells through suppression of the AKT/glycogen synthase kinase-3ß/ß-catenin pathway.

Solasodine is a main active component isolated from Solanum incanum L. that performs a wide range of functions containing anti-oxidant, anti-infection, and neurogenesis promotion. In this study, we explored the influence of solasodine on three types of human colorectal cancer (CRC) cell lines. The results show that solasodine prohibited CRC cell proliferation dose- and time-dependently and impeded CRC cell motility by downregulating MMPs. Solasodine was also found to fuel caspase-cascade reaction and increase the ratio between Bax and Bcl-2 so as to induce CRC cell apoptosis. When cells were pretreated with AKT activator (insulin-like growth factor-1) followed by solasodine, the solasodine-induced apoptosis was partially abrogated by insulin-like growth factor-1. Moreover, solasodine hindered tumor development and stimulated similar mechanisms in vivo. In general, our study provides the first evidence that solasodine has a suppressive effect on CRC cells and that this agent may be a novel therapeutic drug for CRC treatment.

Dispersion engineering and frequency comb generation in thin silicon nitride concentric microresonators.

Kerr nonlinearity-based frequency combs and solitons have been generated from on-chip microresonators. The initiation of the combs requires global or local anomalous dispersion which leads to many limitations, such as material choice, film thickness, and spectral ranges where combs can be generated, as well as fabrication challenges. Using a concentric racetrack-shaped resonator, we show that such constraints can be lifted and resonator dispersion can be engineered to be anomalous over moderately broad bandwidth. We demonstrate anomalous dispersion in a 300 nm thick silicon nitride film, suitable for semiconductor manufacturing but previously thought to result in waveguides with high normal dispersion. Together with a mode-selective, tapered coupling scheme, we generate coherent mode-locked frequency combs. Our method can realize anomalous dispersion for resonators at almost any wavelength and simultaneously achieve material and process compatibility with semiconductor manufacturing.Kerr frequency comb generation from microresonators requires anomalous dispersion, imposing restrictions on materials and resonator design. Here, Kim et al. propose a concentric racetrack-resonator design where the dispersion can be engineered to be anomalous via resonant mode coupling.

Soliton repetition rate in a silicon-nitride microresonator.

The repetition rate of a Kerr comb composed of a single soliton in an anomalous group velocity dispersion silicon-nitride microcavity is measured as a function of pump frequency. By comparing operation in the soliton and non-soliton states, the contributions from the Raman soliton self-frequency shift (SSFS) and the thermal effects are evaluated; the SSFS is found to dominate the changes in the repetition rate, similar to silica cavities. The relationship between the changes in the repetition rate and the pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ∼50 fs.

Second-harmonic-assisted four-wave mixing in chip-based microresonator frequency comb generation.

Simultaneous Kerr comb formation and second-harmonic generation with on-chip microresonators can greatly facilitate comb self-referencing for optical clocks and frequency metrology. Moreover, the presence of both second- and third-order nonlinearities results in complex cavity dynamics that is of high scientific interest but is still far from being well-understood. Here, we demonstrate that the interaction between the fundamental and the second-harmonic waves can provide an entirely new way of phase matching for four-wave mixing in optical microresonators, enabling the generation of optical frequency combs in the normal dispersion regime under conditions where comb creation is ordinarily prohibited. We derive new coupled time-domain mean-field equations and obtain simulation results showing good qualitative agreement with our experimental observations. Our findings provide a novel way of overcoming the dispersion limit for simultaneous Kerr comb formation and second-harmonic generation, which might prove to be especially important in the near-visible to visible range where several atomic transitions commonly used for the stabilization of optical clocks are located and where the large normal material dispersion is likely to dominate.

Observation of Fermi-Pasta-Ulam Recurrence Induced by Breather Solitons in an Optical Microresonator.

We present, experimentally and numerically, the observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in a high-Q SiN microresonator. Breather solitons can be excited by increasing the pump power at a relatively small pump phase detuning in microresonators. Out of phase power evolution is observed for groups of comb lines around the center of the spectrum compared to groups of lines in the spectral wings. The evolution of the power spectrum is not symmetric with respect to the spectrum center. Numerical simulations based on the generalized Lugiato-Lefever equation are in good agreement with the experimental results and unveil the role of stimulated Raman scattering in the symmetry breaking of the power spectrum evolution. Our results show that optical microresonators can be exploited as a powerful platform for the exploration of soliton dynamics.

Intracavity characterization of micro-comb generation in the single-soliton regime.

Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output power, our experiments reveal that inside the microcavity, most of the power is in the soliton. Time-domain measurements performed at the drop port provide information that directly reflects the intracavity field. Data confirm a train of bright, close to bandwidth-limited pulses, accompanied by a weak continuous wave (CW) background with a small phase shift relative to the comb.

Strip-slot direct mode coupler.

We present a direct strip-slot waveguide mode coupler without any auxiliary structures. Contrary to popular belief, an apparent mode mismatch between strip and slot waveguide does not deteriorate conversion efficiency. Separated electric and magnetic field distributions in a slot waveguide lead to highly efficient modal coupling in the direct strip-slot coupler and result in high conversion efficiency. Accurate experimental characterization shows that the direct strip-slot waveguide mode coupler is capable of up to 96% conversion efficiency with a broad bandwidth. Being simplest and of high efficiency, the direct strip-slot waveguide mode coupler can encourage potential applications of slot waveguides.

Thermal tuning of Kerr frequency combs in silicon nitride microring resonators.

Microresonator based Kerr frequency comb generation has many attractive features, including ultrabroad spectra, chip-level integration, and low power consumption. Achieving precise tuning control over the comb frequencies will be important for a number of practical applications, but has been little explored for microresonator combs. In this paper, we characterize the thermal tuning of a coherent Kerr frequency comb generated from an on-chip silicon nitride microring. When the microring temperature is changed by ~70 °C with an integrated microheater, the line spacing and center frequency of the comb are tuned respectively by -253 MHz (-3.57 MHz/°C) and by -175 GHz (-2.63 GHz/°C); the latter constitutes 75% of the comb line spacing. From these results we obtain a shift of 25 GHz (362.07 MHz/°C) in the comb carrier-envelope offset frequency. Numerical simulations are performed by taking into account the thermo-optic effects in the waveguide core and cladding. The temperature variation of the comb line spacing predicted from simulations is close to that observed in experiments. The time-dependent thermal response of the microheater based tuning scheme is characterized; time constants of 30.9 µs and 0.71 ms are observed.