Predicting the current and future suitable distribution range of Trilocha varians (Walker, 1855) (Lepidoptera: Bombycidae) in China.

Trilocha varians is one of the major pests of Ficus spp. Based on 19 bioclimatic variables provided by the Worldclim, our study analysed the suitable distribution areas of T. varians under current and future climate changes (SSP1-2.6, SSP2-4.5, SSP5-8.5) for two periods (the 2050s and 2090s) using the maximum entropy algorithm (MaxEnt) model. Key environmental variables affecting the geographic distribution of T. varians were also identified, and the changes in the area of suitable range under current and future climate changes were compared. The results showed that the key environmental variables affecting the distribution of T. varians were temperature and precipitation, comprising annual mean temperature (bio1), temperature seasonality (standard deviation × 100) (bio4), precipitation of driest month (bio14), and precipitation of driest quarter (bio17). Under the current climatic conditions, the suitable distribution area of T. varians is within the range of 92°13'E-122°08'E, 18°17'N-31°55'N. The current high, medium, and low suitable areas for T. varians predicted by the MaxEnt model are 14.00 × 104, 21.50 × 104, and 71.95 × 104 km2, of which the high suitable areas are mainly distributed in southern Guangdong, southwestern Guangxi, western Taiwan, Hong Kong, and Hainan. Under different future climatic conditions, some of the high, medium, and low suitability zones for T. varians increased and some decreased, but the mass centre did not migrate significantly. The Pearl River Basin is predicted to remain the main distribution area of T. varians.

Chemical Composition Variation in Essential Oil and Their Correlation with Climate Factors in Chinese Prickly Ash Peels (Zanthoxylum armatum DC.) from Different Habitats.

Essential oils are secondary metabolites in plants with a variety of biological activities. The flavor and quality of Zanthoxylum armatum DC. are mainly determined by the essential oil components in the Chinese prickly ash peels. In this study, the correlation between climate change in different regions and the content of essential oils of Z. armatum was investigated using gas chromatography-mass spectrometry (GC/MS) and multivariate statistical analysis. The Z1-24 refers to 24 batches of samples from different habitats. A total of 145 essential oils were detected in 24 batches of samples, with the highest number of terpene species and the highest content of alcohol. The relative odor activity (ROAV) values identified nine main flavor compounds affecting the odor of Z. armatum. Linalool, decanal, and d-limonene were the most critical main flavor compounds, giving Z. armatum a spicy, floral, oily, and fruity odor. The results of hierarchical cluster analysis (HCA) and principal component analysis (PCA) classified Z5 into a separate group, Z2 and Z7 were clustered into one group, and the rest of the samples were classified into another group. Correlation analysis and path analysis showed that temperature and precipitation were the main climatic factors affecting essential oils. Comparisons can be made with other plants in the genus Zanthoxylum to analyze differences in essential oil type and content. This study contributes to the identification of Z. armatum quality, promotes the accumulation of theories on the effects of climatic factors on essential oils, and enriches the site selection and breeding of Z. armatum under similar climatic conditions.

Integrating transcriptomics and metabolomics to analyze the defense response of Morus notabilis to mulberry ring rot disease.

Introduction: The mulberry industry has thrived in China for millennia, offering significant ecological and economic benefits. However, the prevalence of mulberry ring rot disease poses a serious threat to the quality and yield of mulberry leaves. Methods: In this study, we employed a combination of transcriptomic and metabolomic analyses to elucidate the changes occurring at the transcriptional and metabolic levels in Morus notabilis in response to this disease infestation. Key metabolites identified were further validated through in vitro inhibition experiments. Results: The findings revealed significant enrichment in Kyoto Encyclopedia of Genes and Genomes pathways, particularly those related to flavonoid biosynthesis. Notably, naringenin, kaempferol, and quercetin emerged as pivotal players in M. notabilis' defense mechanism against this disease pathogen. The upregulation of synthase genes, including chalcone synthase, flavanone-3-hydroxylase, and flavonol synthase, suggested their crucial roles as structural genes in this process. In vitro inhibition experiments demonstrated that kaempferol and quercetin exhibited broad inhibitory properties, while salicylic acid and methyl jasmonate demonstrated efficient inhibitory effects. Discussion: This study underscores the significance of the flavonoid biosynthesis pathway in M. notabilis' defense response against mulberry ring rot disease, offering a theoretical foundation for disease control measures.

Potential impact of climatic factors on the distribution of Graphium sarpedon in China.

Graphium sarpedon is a significant foliar pest of Laurel plants in China. In this study, the MaxEnt model was used to investigate the distribution of G. sarpedon and predict its potential distribution areas in China in the future (2050s and 2090s) based on three Shared Socioeconomic Pathways (SSP1-2.6, SSP2-4.5, and SSP5-8.5), and key environmental variables affecting its distribution were identified. The results showed that under the current climatic conditions, the suitable distribution areas of G. sarpedon were 92.17°-134.96° E and 18.04°-33.61° N, including Yangtze Plain (Middle and Lower), Pearl River Delta, Yangtze River Delta, and Lingnan areas. Under the future climate conditions, the total suitable distribution area of G. sarpedon decreased, but the area of medium suitable area increased. The study identified 11 key environmental variables affecting the distribution of G. sarpedon, the most critical of which was Precipitation of Warmest Quarter (bio18) and precipitation in April, May, June, and September (prec4, prec5, prec6, and prec9). This study is beneficial for monitoring and preventing the possible changes of G. sarpedon and provides theoretical references for its prevention and control.

Predicting the Distribution of Sclerodermus sichuanensis (Hymenoptera: Bethylidae) under Climate Change in China.

Sclerodermus sichuanensis is the natural enemy of the longicorn beetle due to its strong attack ability and high parasitic rate. Its good resistance and fecundity make it have significant biological control value. The Maxent model and ArcGIS software were used to simulate the current distribution of S. sichuanensis in China by combining the known distribution information and environmental variables and predict the suitable area of the 2050s (2041-2060) and 2090s (2081-2000) under three climate scenarios (SSP1-2.6, SSP2-4.5. and SSP5-8.5). The results showed that the Mean Diurnal Range (bio2), Min Temperature of the Coldest Month (bio6), Precipitation of the Warmest Quarter (bio18), and Max Temperature of the Warmest Month (bio5) were the key environmental variables affecting the distribution of S. sichuanensis. Southwest China and part of North China are the main concentrations of the current high-suitability areas of S. sichuanensis. The moderately suitable areas are concentrated in South China and Central China. Under the SSP5-8.5 scenario, the suitable area predicted in the 2050s will expand significantly to North China and Northwest China, with a total increase of 81,295 km2. This work provides an essential reference for future research on S. sichuanensis and the application of forestry pest control.

Adsorption behavior of UV aged microplastics on the heavy metals Pb(II) and Cu(II) in aqueous solutions.

As the "vector" of heavy metals in the aquatic environment, microplastics (MPs) have a great influence on the migration and transformation of heavy metals. In this study, the adsorption of polypropylene (PP), polyethylene (PE) and polystyrene (PS) on two models of heavy metals after UV aging and environmental variables (ionic coexistence, pH, salinity, and fulvic acid) were comprehensively explored on adsorption. The results show that new oxidation functional groups are formed and their hydrophilicity is enhanced after MPs aging. As a result, the adsorption experiments showed that the adsorption of contaminants by UV aged MPs exceeds that of pristine MPs. The adsorption amounts of Pb(II) and Cu(II) by PP, PE and PS increased by 1.45, 1.46, 1.25 and 1.63, 1.39, 1.22 times, respectively. Adsorption kinetic data were more consistent with the pseudo-second-order kinetic model, proving chemisorption to be the mechanism governing the interaction between metal ions and MPs. The Freundlich model could accurately predict the heavy metal adsorption isotherms on MPs, showing that non-homogeneous multilayer adsorption dominates the process. In Pb(II)-Cu(II) binary composite system, metal ion adsorption capacity on MPs is less than that of the single system adsorption capacity, which proves that there is a specific inhibitory effect between coexisting ions. Additionally, external factors like pH, salinity, and fulvic acid content have a big impact on adsorption behavior. According to mechanism analysis, the adsorption process mainly relies on electrostatic interaction, surface complexation, and van der Waals force.

UV and chemical aging alter the adsorption behavior of microplastics for tetracycline.

This study evaluates the "vector" effects of different microplastics (MPs) on coexisting pollutants. The adsorption of tetracycline was studied on biodegradable plastics poly(butylene adipate-co-terephthalate) (PBAT) and non-biodegradable plastics polystyrene (PS), polypropylene (PP), and polyethylene (PE) after UV aging and chemical aging. The physicochemical properties of PBAT changed more obviously after UV radiation and chemical aging comparing to PS, PP and PE. Pores and cracks appear on the surface of aged PBAT. The crystallinity increased from 29.2% to 52.62%. In adsorption experiments, pristine and aged PBAT had strong vector effects on the adsorption of tetracycline than PS, PP and PE. The adsorption capacity of tetracycline on PBAT was increased from 0.7980 mg g-1 to 1.2669 mg g-1 after chemical aging. The adsorption mechanism indicated that electrostatic interactions and hydrogen bonds contribute to the adsorption process. In addition, for the adsorption of tetracycline on PS, π-π interaction was the main cause, and the adsorption mechanism was not considerably changed by aging. In conclusion, this study demonstrates that biodegradable plastics have substantial vector effect on coexisting pollutants at the end of their life cycle, this contributes to assessment of the risk from microplastic pollution.

Image Segmentation Using Active Contours with Hessian-Based Gradient Vector Flow External Force.

The gradient vector flow (GVF) model has been widely used in the field of computer image segmentation. In order to achieve better results in image processing, there are many research papers based on the GVF model. However, few models include image structure. In this paper, the smoothness constraint formula of the GVF model is re-expressed in matrix form, and the image knot represented by the Hessian matrix is included in the GVF model. Through the processing of this process, the relevant diffusion partial differential equation has anisotropy. The GVF model based on the Hessian matrix (HBGVF) has many advantages over other relevant GVF methods, such as accurate convergence to various concave surfaces, excellent weak edge retention ability, and so on. The following will prove the advantages of our proposed model through theoretical analysis and various comparative experiments.

Effectiveness and Controversy of Convalescent Plasma Therapy for Coronavirus Disease 2019 Patients.

Since the coronavirus disease 2019 (COVID-19) began to spread, it remains pandemic worldwide. The European Medicines Agency's human medicines committee and Food and Drug Administration have only granted a conditional marketing authorization for remdesivir to treat COVID-19. It is essential to apply other valuable treatments. Convalescent plasma (CP), donated by persons who have recovered from COVID-19, is the cellular component of blood that contains specific antibodies. Therefore, to determine the feasibility of CP for COVID-19, the effectiveness and controversy are discussed in depth here. It is suggested that CP plays a certain role in the treatment of COVID-19. As a treatment, it may have its own indications and contraindications, which need to be further discussed. Meanwhile, it is critical to establish a standard procedure for treatment from CP collection, preservation, transport, to transfusion, and conduct some large sample randomized controlled trials to confirm the transfusion dosage, appropriate time, frequency, and actively prevent adverse outcomes that may occur.

Can environmental innovation benefit from outward foreign direct investment to developed countries? Evidence from Chinese manufacturing enterprises.

Environmental innovation is an important way to low-carbon economic growth. Outward foreign direct investment (OFDI) can produce reverse technology transfer to promote innovation. This study aims to examine whether OFDI to developed countries can transfer reverse green technology and promote the environmental innovation of manufacturing enterprises in emerging economies (EEs). Based on the technology gap theory, resource bricolage theory, resource-based view, and Potter hypothesis, this study constructs a conceptual model including the direct effect of OFDI on environmental innovation and the moderating effects of the knowledge level of the host country, multinational strategy, absorptive capacity, and environmental regulation. To verify the model, we also use a panel dataset of 424 Chinese manufacturing enterprises during 2010-2017, and the results indicate that OFDI to developed countries can produce reverse green technology transfer and promote parent companies' environmental innovation. The knowledge level of the host country and multinational strategy can further improve the impacts on environmental product innovation. However, absorptive capacity and environmental regulation in EEs do not play a significant moderating role. Consequently, this study expands the application scope of existing theories and enriches the theoretical basis of the relationship between OFDI and environmental innovation.

Dual-responsive molybdenum disulfide/copper sulfide-based delivery systems for enhanced chemo-photothermal therapy.

Molybdenum disulfide (MoS2)-based drug delivery systems have shown considerable potential in cancer nanomedicines. In this work, a multifunctional nanoplatform comprising MoS2 nanosheets decorated with copper sulfide (CuS) and further functionalized with polyethylene glycol (PEG) is reported. The resultant material has a particle size of approximately 115 nm, and can be loaded with doxorubicin (DOX) to a loading capacity of 162.3 mg DOX per g of carrier. Drug release is triggered by two stimuli (near infrared (NIR) irradiation and pH), and the carrier is shown to have excellent colloidal stability. The presence of both MoS2 and CuS leads to very high photothermal conversion efficiency (higher than with MoS2 alone). In vitro experiments revealed that the blank CuS-MoS2-SH-PEG carrier is biocompatible, but that the synergistic application of chemo-photothermal therapy (in the form of CuS-MoS2-SH-PEG loaded with DOX and NIR irradiation) led to greater cell death than either chemotherapy (CuS-MoS2-SH-PEG(DOX) but no NIR) or photothermal therapy (CuS-MoS2-SH-PEG with NIR). A cellular uptake study demonstrated that the nanoplatform can efficiently enter tumor cells, and that uptake is enhanced when NIR is applied. Overall, the functionalized MoS2 material developed in this work exhibits great potential as an efficient system for dual responsive drug delivery and synergistic chemo-photothermal therapy. The route employed in our work thus provides a strategy to enhance photothermal efficacy for transition metal dichalcogenide drug delivery systems.

Functionalized MoS2-nanosheets for targeted drug delivery and chemo-photothermal therapy.

Molybdenum disulfide (MoS2) has been extensively explored for biomedical applications due to its excellent photothermal conversion ability. In this paper, we report a nanoplatform based on folic acid (FA) targeted dual-stimuli responsive MoS2 nanosheets and explore this for the treatment of FA-receptor positive human breast cancer. The nanocomposites generated had a uniform diameter (ca. 133 nm), and could be loaded with the anti-cancer drug doxorubicin (DOX) to a high capacity (151.4 mg/g). The release of DOX was greatly accelerated at pH 5.0 as compared to pH 7.4. In addition, it was found that drug release is enhanced under near infrared laser (NIR) irradiation, showing that the composites can be used as dual responsive systems, with DOX release controllable through pH or NIR irradiation. MTT assays and confocal experiments showed that the MoS2-based nanoplatform could selectively target and kill FA-positive MDA-MB-231 cells (a human breast cancer cell line). The platform also allowed the combination of chemotherapy and photothermal therapy, which led to synergistic effects superior to either monotherapy. The functionalized MoS2 nanoplatform developed in this work hence could be a potent system for targeted drug delivery and synergistic chemo-photothermal cancer therapy.

Genetic Polymorphism Study on Aedes albopictus of Different Geographical Regions Based on DNA Barcoding.

Aedes albopictus is a very important vector for pathogens of many infectious diseases including dengue fever. In this study, we explored the genetic polymorphism of Aedes albopictus strains in different geographical regions using DNA barcoding of mitochondrial COI (MT-COI) gene. We collected MT-COI sequence of 106 Aedes albopictus mosquitos from 6 provinces in China including Fujian, Guangdong, Hainan, Yunnan, and Taiwan. The length of the sequences is 709bp with the content of A+T (67.7%) greater than that of G+C (32.3%). We identified mutations in 90 (13.68%) loci, of which 57 (63.33%) are transitions, 28 (31.11%) are transversions, and 5 (5.56%) are hypervariable loci. In addition, we obtained 42 haplotypes, 4 (9.52%) of which are shared among different populations. The haplotype diversity of Aedes albopictus is 0.882 and nucleotide diversity is 0.01017. Moreover, the pedigree network diagram shows that most haplotypes are under parallel evolution, suggesting a local expansion of Aedes albopictus in history. Finally, the Neighbor-Joining tree of MT-COI haplotypes reveals a certain correlation between haplotype clusters and geographical distribution, and there are differences among Aedes albopictus in different geographical regions. In conclusion, DNA barcoding of MT-COI gene is an effective method to study the genetic structure of Aedes albopictus.

l-Peptide functionalized dual-responsive nanoparticles for controlled paclitaxel release and enhanced apoptosis in breast cancer cells.

Nanoparticles and macromolecular carriers have been widely used to increase the efficacy of chemotherapeutics, largely through passive accumulation provided by their enhanced permeability and retention effect. However, the therapeutic efficacy of nanoscale anticancer drug delivery systems is severely truncated by their low tumor-targetability and inefficient drug release at the target site. Here, the design and development of novel l-peptide functionalized dual-responsive nanoparticles (l-CS-g-PNIPAM-PTX) for active targeting and effective treatment of GRP78-overexpressing human breast cancer in vitro and in vivo are reported. l-CS-g-PNIPAM-PTX NPs have a relative high drug loading (13.5%) and excellent encapsulation efficiency (74.3%) and an average diameter of 275 nm. The release of PTX is slow at pH 7.4 and 25 °C but greatly accelerated at pH 5.0 and 37 °C. MTT assays and confocal experiments showed that the l-CS-g-PNIPAM-PTX NPs possessed high targetability and antitumor activity toward GRP78 overexpressing MDA-MB-231 human breast cancer cells. As expected, l-CS-g-PNIPAM-PTX NPs could effectively treat mice bearing MDA-MB-231 human breast tumor xenografts with little side effects, resulting in complete inhibition of tumor growth and a high survival rate over an experimental period of 60 days. These results indicate that l-peptide-functionalized acid - and thermally activated - PTX prodrug NPs have a great potential for targeted chemotherapy in breast cancer.

HIV/AIDS-related hyponatremia: an old but still serious problem.

Hyponatremia is the most common electrolyte disorder in hospitals. Many medical illnesses, including congestive heart failure, liver failure, renal failure and pneumonia, may be associated with hyponatremia. In addition, hyponatremia in patients with the acquired immunodeficiency syndrome (AIDS) and AIDS-related complex (ARC) was first reported in 1993. The evidence suggests that severe hyponatremia is associated with increased morbidity and mortality in human immunodeficiency virus (HIV)/AIDS patients; however, the incidence of hyponatremic syndrome in HIV/AIDS patients remains very high in clinical practice, as almost 40% of HIV/AIDS inpatients in Xinjiang, a developing region of China, are hyponatremic. A method for identifying the pathogenesis and therapeutic treatments for hyponatremia in HIV/AIDS patients is needed. This review focuses on the clinical and pathophysiological aspects of hyponatremia and highlights the causes, presentation and treatment recommendations for hyponatremic patients with HIV/AIDS.

Design of Amorphous Manganese Oxide@Multiwalled Carbon Nanotube Fiber for Robust Solid-State Supercapacitor.

Solid-state fiber-based supercapacitors have been considered promising energy storage devices for wearable electronics due to their lightweight and amenability to be woven into textiles. Efforts have been made to fabricate a high performance fiber electrode by depositing pseudocapacitive materials on the outer surface of carbonaceous fiber, for example, crystalline manganese oxide/multiwalled carbon nanotubes (MnO2/MWCNTs). However, a key challenge remaining is to achieve high specific capacitance and energy density without compromising the high rate capability and cycling stability. In addition, amorphous MnO2 is actually preferred due to its disordered structure and has been proven to exhibit superior electrochemical performance over the crystalline one. Herein, by incorporating amorphous MnO2 onto a well-aligned MWCNT sheet followed by twisting, we design an amorphous MnO2@MWCNT fiber, in which amorphous MnO2 nanoparticles are distributed in MWCNT fiber uniformly. The proposed structure gives the amorphous MnO2@MWCNT fiber good mechanical reliability, high electrical conductivity, and fast ion-diffusion. Solid-state supercapacitor based on amorphous MnO2@MWCNT fibers exhibits improved energy density, superior rate capability, exceptional cycling stability, and excellent flexibility. This study provides a strategy to design a high performance fiber electrode with microstructure control for wearable energy storage devices.