RESUMO
Experimental studies have shown that ultrasonic cavitation can reversibly open the blood-brain barrier (BBB) to assist drug delivery. Nevertheless, the majority of the present study focused on experimental aspects of BBB opening. In this study, we developed a three-bubble-liquid-solid model to investigate the dynamic behavior of multiple bubbles within the blood vessels, and elucidate the physical mechanism of drug molecules through endothelial cells under ultrasonic cavitation excitation. The results showed that the large bubbles have a significant inhibitory effect on the movement of small bubbles, and the vibration morphology of intravascular microbubbles was affected by the acoustic parameters, microbubble size, and the distance between the microbubbles. The ultrasonic cavitation can significantly enhance the unidirectional flux of drug molecules, and the unidirectional flux growth rate of the wall can reach more than 5 %. Microjets and shock waves emitted from microbubbles generate different stress distribution patterns on the vascular wall, which in turn affects the pore size of the vessel wall and the permeability of drug molecules. The vibration morphology of microbubbles is related to the concentration, arrangement and scale of microbubbles, and the drug permeation impact can be enhanced by optimizing bubble size and acoustic parameters. The results offer an extensive depiction of the factors influencing the blood-brain barrier opening through ultrasonic cavitation, and the model may provide a potential technique to actively regulate the penetration capacity of drugs through endothelial layer of the neurovascular system by regulating BBB opening.
Assuntos
Barreira Hematoencefálica , Microbolhas , Ondas Ultrassônicas , Barreira Hematoencefálica/metabolismo , Simulação por Computador , Modelos BiológicosRESUMO
Ultrasonography is a widely used medical imaging technique for detecting breast cancer. While manual diagnostic methods are subject to variability and time-consuming, computer-aided diagnostic (CAD) methods have proven to be more efficient. However, current CAD approaches neglect the impact of noise and artifacts on the accuracy of image analysis. To enhance the precision of breast ultrasound image analysis for identifying tissues, organs and lesions, we propose a novel approach for improved tumor classification through a dual-input model and global average pooling (GAP)-guided attention loss function. Our approach leverages a convolutional neural network with transformer architecture and modifies the single-input model for dual-input. This technique employs a fusion module and GAP operation-guided attention loss function simultaneously to supervise the extraction of effective features from the target region and mitigate the effect of information loss or redundancy on misclassification. Our proposed method has three key features: (i) ResNet and MobileViT are combined to enhance local and global information extraction. In addition, a dual-input channel is designed to include both attention images and original breast ultrasound images, mitigating the impact of noise and artifacts in ultrasound images. (ii) A fusion module and GAP operation-guided attention loss function are proposed to improve the fusion of dual-channel feature information, as well as supervise and constrain the weight of the attention mechanism on the fused focus region. (iii) Using the collected uterine fibroid ultrasound dataset to train ResNet18 and load the pre-trained weights, our experiments on the BUSI and BUSC public datasets demonstrate that the proposed method outperforms some state-of-the-art methods. The code will be publicly released at https://github.com/425877/Improved-Breast-Ultrasound-Tumor-Classification.
Assuntos
Neoplasias , Ultrassonografia Mamária , Feminino , Humanos , Artefatos , Fontes de Energia Elétrica , Processamento de Imagem Assistida por ComputadorRESUMO
Studying the formation and stability of atherosclerotic plaques in the hemodynamic field is essential for understanding the growth mechanism and preventive treatment of atherosclerotic plaques. In this paper, based on a multiplayer porous wall model, we established a two-way fluid-solid interaction with time-varying inlet flow. The lipid-rich necrotic core (LRNC) and stress in atherosclerotic plaque were described for analyzing the stability of atherosclerotic plaques during the plaque growth by solving advection-diffusion-reaction equations with finite-element method. It was found that LRNC appeared when the lipid levels of apoptotic materials (such as macrophages, foam cells) in the plaque reached a specified lower concentration, and increased with the plaque growth. LRNC was positively correlated with the blood pressure and was negatively correlated with the blood flow velocity. The maximum stress was mainly located at the necrotic core and gradually moved toward the left shoulder of the plaque with the plaque growth, which increases the plaque instability and the risk of the plaque shedding. The computational model may contribute to understanding the mechanisms of early atherosclerotic plaque growth and the risk of instability in the plaque growth.
RESUMO
We propose a simple thin-layer structure based on epsilon-near-zero mode field enhancement to achieve optical bistability in the near-infrared band. The high transmittance provided by the thin-layer structure and the electric field energy limited in the ultra-thin epsilon-near-zero material means that the interaction between the input light and the epsilon-near-zero material can be greatly enhanced, creating favorable conditions for the realization of optical bistability in near-infrared band. The optical bistability hysteresis curve is closely related to the incident angle of light and the thickness of epsilon-near-zero material. This structure is relatively simple and easy to prepare, so we believe that this scheme will have a positive effect on the practicality of optical bistability devices in all-optical devices and networks.
Assuntos
Dispositivos Ópticos , EletricidadeRESUMO
Many studies have shown that microbubble cavitation is one mechanism for vascular injury under ultrasonic excitation. Previous work has attributed vascular damage to vessel expansions and invaginations due to the expansion and contraction of microbubbles. However, the mechanisms of vascular damage are not fully understood. In this paper, we investigate, theoretically and experimentally, the vessel injury due to stress induced by ultrasound-induced cavitation (UIC). A bubble-fluid-vessel coupling model is constructed to investigate the interactions of the coupling system. The dynamics process of vessel damage due to UIC is theoretically simulated with a finite element method, and a focused ultrasound (FU) setup is carried out and used to assess the vessel damage. The results show that shear stress contributes to vessel injury by cell detachment while normal stress mainly causes distention injury. Similar changes in cell detachment in a vessel over time can be observed with the experimental setup. The severity of vascular injury is correlated to acoustic parameters, bubble-wall distance, and microbubble sizes, and the duration of insonation..
Assuntos
Microbolhas , Lesões do Sistema Vascular , Acústica , Meios de Contraste , Humanos , Estresse MecânicoRESUMO
We investigate the low-threshold optical bistability of transmitted beams at the terahertz range based on the photonic crystal Fabry-Perot cavity with graphene. Graphene with strong nonlinear conductivity is placed in the middle of the Fabry-Perot cavity and the resonance of the cavity plays a positive role in promoting the low-threshold optical bistability. The optical bistability curve is closely related to the incident angle of light, the parameters of graphene, and the structural parameters of the Fabry-Perot cavity. Through parameter optimization, optical bistability with threshold of 105 V/m can be obtained, which has reached or is close to the range of the weak field.
RESUMO
In this paper, the reflected and transmitted group delay from a one-dimensional photonic crystal heterostructure with graphene at communication band are investigated theoretically. It is shown that the negative reflected group delay of the beam in this structure can be significantly enhanced and can be switched to positive. The large reflected group delay originates from the sharp phase change caused by the excitation of topological edge state at the interface between the two one-dimensional photonic crystals. Besides, the introduction of graphene provides an effective approach for the dynamic control of the group delay. It is clear that the positive and negative group delay can be actively manipulated through the Fermi energy and the relaxation time of the graphene. In addition, we also investigate the transmitted group delay of the structure, which is much less than the reflected one. The enhanced and tunable delay scheme is promising for fabricating optical delay devices like optical buffer, all-optical delays and other applications at optical communication band.
RESUMO
In this paper, the one-dimensional photonic crystal Fano resonance heterostructure is used to achieve low-threshold and tunable graphene-based optical bistability of the transmitted and reflected light beam at optical communication band. The low-threshold of optical bistability (OB) originates from the local field enhancement owing to the Fano resonance excited by topological edge states mode and Fabry-Perot cavity mode. The study found that it is feasible to continuously adjust the hysteresis behavior and optical bistable thresholds by altering the Fermi energy of the left and right graphene respectively. Furthermore, the OB can also be controlled by changing the number of graphene layers or the angle of incident beam, which makes this structure a feasible object of experimental research at optical communication band in the future.
RESUMO
Disclosed herein is a rhodium-catalyzed oxidative C-H activation/domino annulation of N-Boc-anilines with 1,3-diynes for the construction of tricyclic N,O-heteroaromatics. This reaction features easily available substrates, mild reaction conditions, high regioselectivity, mono/diannulation selectivity, and intra/intermolecular annulation selectivity. Moreover, this synthetic protocol enables the rapid assembly of a library of blue-emitting molecules with high quantum yields, among of which two fluorophores with pure blue-emission in toluene are discovered.
RESUMO
Identification of denatured biological tissue is crucial to high intensity focused ultrasound (HIFU) treatment. It is not easy for intercepting ultrasonic scattered echo signals from HIFU treatment region. Therefore, this paper employed time-frequency entropy based on generalized S-transform (GST) to intercept ultrasonic echo signals. First, the time-frequency spectra of ultrasonic echo signal is obtained by GST, which is concentrated around the real instantaneous frequency of the signal. Then the time-frequency entropy is calculated based on time-frequency spectra. The experimental results indicate that the time-frequency entropy of ultrasonic echo signal will be abnormally high when ultrasonic signal travels across the boundary between normal region and treatment region in tissues. Ultrasonic scattered echo signals from treatment region can be intercepted by time-frequency entropy. In addition, the refined composite multi-scale weighted permutation entropy (RCMWPE) is proposed to evaluate the complexity of nonlinear time series. Comparing with multi-scale permutation entropy (MPE) and multi-scale weighted permutation entropy (MWPE), RCMWPE not only measures complexity of signal including amplitude information, but also improves the stability and reliability of multi-scale entropy. The RCMWPE and MPE are applied to 300 cases of actual ultrasonic scattered echo signals (including 150 cases in normal status and 150 cases in denatured status). It is found that the RCMWPE and MPE values of denatured tissues are higher than those of the normal tissues. Both RCMWPE and MPE can be used to distinguish normal tissues and denatured tissues. However, there are fewer feature points in the overlap region between RCMWPE of denatured tissues and normal tissues compared with MPE. The intra-class distance and the inter-class distance of RCMWPE are less and greater respectively than MPE. The difference between denatured tissues and normal tissues is more obvious when RCMWPE is used as the characteristic parameter. The results of this study will be helpful to guide doctors to obtain more accurate assessment of treatment effect during HIFU treatment.
RESUMO
The development of facile methods for screening organic functional molecules through C-H bond activation is a revolutionary trend in materials research. The prediction of mechanochromism as well as mechanochromic trends of luminogens is an appealing yet challenging puzzle. Here, we present a strategy for the design of mechanochromic luminogens based on the dipole moment of donor-acceptor molecules. For this purpose, a highly efficient route to 2,7-diaryl-[1,2,4]triazolo[1,5-a]pyrimidines (2,7-diaryl-TAPs) has been established through programmed C-H arylation, which unlocks a great opportunity to rapidly assemble a library of fluorophores for the discovery of mechanochromic regularity. Molecular dipole moment can be employed to explain and further predict the mechanochromic trends. The 2,7-diaryl-TAPs with electron-donating groups on the 2-aryl and electron-withdrawing groups on the 7-aryl possess a relatively small dipole moment and exhibit a red-shifted mechanochromism. When the two aryls are interchanged, the resulting luminogens have a relatively large dipole moment and display a blue-shifted mechanochromism. Seven pairs of isomers with opposite mechanochromic trends are presented as illustrative examples. The aryl-interchanged congeners with a bidirectional emission shift are structurally similar, which provides an avenue for understanding in-depth the mechanochromic mechanism.
RESUMO
C=C bond construction: A palladium-catalyzed oxidative C(sp3)-H/C(sp3)-H cross-coupling is shown to forge C=C bonds rather than C(sp3)-C(sp3) bonds through reactions of indolin-2-ones or benzofuran-2-ones with O-benzoyl hydroxylamines in the absence of an added oxidant.
Assuntos
Benzofuranos/química , Hidroxilaminas/química , Indóis/química , Oxidantes/química , Paládio/química , Catálise , Estrutura Molecular , OxirreduçãoRESUMO
The control problem in ultrasound therapy is to destroy the tumor tissue while not harming the intervening healthy tissue with a desired temperature elevation. The objective of this research is to present a robust and feasible method to control the temperature distribution and the temperature elevation in treatment region within the prescribed time, which can improve the curative effect and decrease the treatment time for heating large tumor (≥2.0cm in diameter). An adaptive self-tuning-regulator (STR) controller has been introduced into this control method by adding a time factor with a recursive algorithm, and the speed of sound and absorption coefficient of the medium is considered as a function of temperature during heating. The presented control method is tested for a self-focused concave spherical transducer (0.5MHz, 9cm aperture, 8.0cm focal length) through numerical simulations with three control temperatures of 43°C, 50°C and 55°C. The results suggest that this control system has adaptive ability for variable parameters and has a rapid response to the temperature and acoustic power output in the prescribed time for the hyperthermia interest. There is no overshoot during temperature elevation and no oscillation after reaching the desired temperatures. It is found that the same results can be obtained for different frequencies and temperature elevations. This method can obtain an ellipsoid-shaped ablation region, which is meaningful for the treatment of large tumor.
Assuntos
Hipertermia Induzida/instrumentação , Temperatura , Terapia por Ultrassom/instrumentação , Algoritmos , Simulação por Computador , Humanos , Neoplasias/terapia , TransdutoresRESUMO
Ultrasound based tissue thermal lesion non-invasive detection is of great significance in high intensity focused ultrasound (HIFU) clinical application. In this paper, we propose a sub-pixel method to quantify the ultrasound image change caused by HIFU as correlation-distance. The support vector machine (SVM) was trained by using correlation distance as samples, and the recognition effect was tested. Results showed that sub-pixel cross-correlation vector field could reflect the ablation lesions position. SVM based classification method can recognize HIFU beam lesion degree effectively.
Assuntos
Algoritmos , Ablação por Ultrassom Focalizado de Alta Intensidade/efeitos adversos , Reconhecimento Automatizado de Padrão/métodos , Máquina de Vetores de Suporte , Diagnóstico por Imagem/métodos , HumanosRESUMO
Temperature control of hyperthermia treatments is generally implemented with multipoint feedback system comprised of phased-array transducer, which is complicated and high cost. Our simulations to the acoustic field induced by a self-focused concave spherical transducer (0.5MHz, 9cm aperture width, 8.0cm focal length) show that the distribution of temperature can keep the same "cigar shape" in the focal region during ultrasound insonation. Based on the characteristic of the temperature change, a two-dimensional model of a "cigar shape" tumor is designed and tested through numerical simulation. One single-point on the border of the "cigar shape" tumor is selected as the control target and is controlled at the temperature of 43 degrees C by using a self-tuning regulator (STR). Considering the nonlinear effects of biological medium, an accurate state-space model obtained via the finite Fourier integral transformation to the bioheat equation is presented and used for calculating temperature. Computer simulations were performed with the perfusion rates of 2.0kg/(m(3)s) and 4.5kg/(m(3)s) to the different targets, it was found that the temperatures on the border of the "cigar shape" tumor can achieve the desired temperature of 43 degrees C by control of one single-point. A larger perfusion rate requires a higher power output to obtain the same temperature elevation under the same insonation time and needs a higher cost for compensating the energy loss carried away by blood flow after steady state. The power output increases with the controlled region while achieving the same temperature at the same time. Especially, there is no overshoot during temperature elevation and no oscillation after steady state. The simulation results demonstrate that the proposed approach may offers a way for obtaining a single-point, low-cost hyperthermia system.
Assuntos
Hipertermia Induzida/métodos , Temperatura , Transdutores , Simulação por Computador , Análise de Fourier , Humanos , Neoplasias/terapia , Terapia por Ultrassom/métodosRESUMO
The concave spherically annular transducer is regarded as a negative and a positive concave spherical transducer, and the spheroidal beam equation is used to simulate the linear and nonlinear sound field in a tissue medium generated by this transducer. It is found that the acoustic focus of the ring does not coincide with the acoustic focus of its central part. If the width of the ring increases, its acoustic focus will move toward the geometric focus and the amplitudes of nonlinear harmonics will increase obviously. If there are several coaxial rings placed on the concave spherical surface, more than one peak will appear along the axial direction for the fundamental, and high harmonics focus better. The distribution of sound field will change with the number and the excited signals of rings, so it maybe is a potential approach to treat locally big tumors.