Constructing an ultrastable imidazole covalent organic framework for concurrent uranium detection and recovery.

Uranium is one of the most important strategic resources for the development of the nuclear industry, but its unintended release has created potential environmental and health risks. It is highly desired to explore new methods that enable concurrent uranium monitoring and recovery for environmental protection and sustainable development of the nuclear industry. Here, for the first time, an imidazole fluorescent covalent organic framework (named PyTT-Tp) with ultrastable skeleton and open nanopore channel is synthesized by condensing ammonium acetate, 1,3,5-triformylphloroglucinol and pyrene-4,5,9,10-tetrone. By precisely tailoring complexing ligands, PyTT-Tp shows an excellent uranium recovery capacity of 941.27 mg g-1 and reached equilibrium within 60 min, which can be attributed to dense selective uranium binding sites on the highly accessible open skeleton. In addition, due to the signal amplification of the pyrene-imidazole skeleton, it has an ultra-low detection limit of 4.92 nM UO22+ and an ultra-fast response time (2 s) suitable for on-site monitoring the uranium content of the extracted water. By modulating target complexing ligands, this approach can be extended to the monitoring and recovery of other strategic nuclides.

Olefin-linked cationic covalent organic frameworks for efficient extraction of ReO4-/99TcO4.

Efficient extraction of radioactive 99TcO4- from strong acid/base solutions by porous adsorbents is extremely desirable but remains a great challenge. To overcome the challenge, here we report the first example of an olefin-linked cationic covalent organic framework (COF) named BDBI-TMT with excellent acid, base and radiation stability is synthesized by integrating robust imidazolium salt-based linkers with triazine building blocks. BDBI-TMT shows an ultra-fast adsorption kinetics (equilibrium is reached within 1 min) and an excellent ReO4- (a non-radioactive surrogate of 99TcO4-) capture capacity of 726 mg g-1, which can be attributed to the abundance of precisely tailored imidazolium salt-based units on the highly accessible pore walls of the ordered pore channels. Furthermore, the formation of the highly conjugated bulky alkyl skeleton enhances the hydrophobicity of BDBI-TMT, which significantly improves not only the affinity toward ReO4-/99TcO4- but also the chemical stability, allowing selective and reversible extraction of ReO4-/99TcO4- even under extreme conditions. This work demonstrates the great potential of olefin-linked cationic COFs for ReO4-/99TcO4- extraction, providing a new avenue to construct high-performance porous adsorbents for radionuclide remediation.

Mo-Doped FeP Nanospheres for Artificial Nitrogen Fixation.

Electrochemical conversion of N2 to NH3 under ambient conditions is a promising and environmentally friendly route compared with the CO2-emitting and energy-intensive Haber-Bosch process. Nevertheless, due to ultrahigh stability of N2, it is urgent to explore efficient catalysts to weaken and activate the N≡N bond. Here, we report the Mo-doped iron phosphide (Mo-FeP) nanosphere as a valid transition-metal-based catalyst for electrochemical N2-to-NH3 fixation under ambient conditions. This catalyst exhibits excellent catalytic performance with a NH4+ yield rate (13.1 µg h-1 mg-1) and Faradaic efficiency (7.49%) at -0.3 and -0.2 V vs reversible hydrogen electrode (RHE), respectively. However, the FeP catalyst without doped Mo species displays weak catalytic performance. We found that the better catalytic performance of Mo-FeP might be due to the doping of Mo species, which is favorable for the polarization of adsorbed N2 molecules, making the N≡N bond more viable to dissociate.

B4C nanosheets decorated with in situ-derived boron-doped graphene quantum dots for high-efficiency ambient N2 fixation.

In situ-derived boron-doped graphene quantum dots can significantly improve the activity of boron carbide nanosheets for artificial N2 fixation and reduction with superior electrocatalytic activity (NH3 yield: 28.6 µg h-1 mgcat.-1 at -0.45 V vs. RHE; faradaic efficiency: 16.7%), high electrochemical stability, and high selectivity in 0.1 M HCl under ambient conditions.

Direct fluorescence detection of microRNA based on enzymatically engineered primer extension poly-thymine (EPEPT) reaction using copper nanoparticles as nano-dye.

A new strategy based on enzymatically engineered primer extension poly-thymine (EPEPT) and nanomaterials in situ generation technology is reported for direct detection of microRNA (miRNA) in a fluorescence turn-on format using the sequential and complementary reactions catalyzed by Klenow Fragment exo- (KFexo-) and terminal deoxynucleotidyl transferase (TdTase). The short miRNA can be efficiently converted into long poly-thymine (polyT) sequences, which function as template for in situ formation of fluorescence copper nanoparticles (CuNPs) as nano-dye for detecting miRNA. The polyT-CuNPs can effectively form and emit intense red fluorescence under the 340nm excitation. For the proof of concept, microRNA-21 (miR-21) was selected as the model target to testify this strategy as a versatile assay platform. By directly using miR-21 as the primer, the simple, rapid and sensitive miRNA detection was successfully achieved with a good linearity between 1pM and 1nM and a detection limit of 100fM. Thus, the EPEPT strategy holds great potential in biochemical sensing research as an efficient and universal platform.

Lanthanide Coordination Polymer Nanoparticles as an Excellent Artificial Peroxidase for Hydrogen Peroxide Detection.

Lanthanide coordination polymer nanoparticles (Ln-CPNs) have been recently demonstrated as excellent platforms for biomolecule detection. In this work, we synthesized novel cerium coordination polymer nanoparticles ATP-Ce-Tris CPNs in a simple and quick way using ATP molecules as the biocompatible ligands to Ce(3+) ions in tris(hydroxymethyl)aminomethane hydrochloric (Tris-HCl) solution. In view of the excellent free radical scavenging property of cerium compounds, which is ascribed to the mixed valence state (Ce(3+), Ce(4+)) and the reversible switch from Ce(3+) to Ce(4+), the synthesized ATP-Ce-Tris CPNs was used as artificial peroxidase to selectively and sensitively detect H2O2. The sensing mechanism depends on the oxidation of the fluorescent ATP-Ce(III)-Tris CPNs to nonfluorescent ATP-Ce(IV)-Tris CPNs by H2O2. Compared with those inorganic cerium oxide sensors, this kind of fluoresence ATP-Ce-Tris CPNs sensor needs no additional organic redox dye, such as ABTS (2,20-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), TMB (3,3,5,5-tetramethylbenzidine), or fluorescein as signal molecules. Moreover, such ATP-Ce-Tris CPNs sensor exhibited a more sensitive response to H2O2 with a detection limit down to 0.6 nM, which is 2 orders of magnitude lower than those of cerium oxide sensors. This sensing platform was further extended to the detection of glucose in combination with the specific catalytic effect of glucose oxidase (GOx) for the oxidation of glucose and formation of H2O2.

Electrochemiluminescence resonance energy transfer between graphene quantum dots and graphene oxide for sensitive protein kinase activity and inhibitor sensing.

Herein, a novel electrochemiluminescence resonance energy transfer (ECL-RET) biosensor using graphene quantum dots (GQDs) as donor and graphene oxide (GO) as acceptor for monitoring the activity of protein kinase was presented for the first time. Anti-phosphoserine antibody conjugated graphene oxide (Ab-GO) nonocomposite could be captured onto the phosphorylated peptide/GQDs modified electrode surface through antibody-antigen interaction in the presence of casein kinase II (CK2) and adenosine 5'-triphosphate (ATP), resulting in ECL from the GQDs quenching by closely contacting GO. This ECL quenching degree was positively correlated with CK2 activity. Therefore, on the basis of ECL-RET between GQDs and GO, the activity of protein kinase can be detected sensitively. This biosensor can also be used for quantitative analysis CK2 activity in serum samples and qualitative screening kinase inhibition, indicating the potential application of the developed method in biochemical fundamental research and clinical diagnosis.