RESUMO
Extracellular matrix (ECM) scaffold membranes have exhibited promising potential to better the outcomes of wound healing by creating a regenerative microenvironment around. However, when compared to the application in younger individuals, the performance of the same scaffold membrane in promoting re-epithelialization and collagen deposition was observed dissatisfying in aged mice. To comprehensively explore the mechanisms underlying this age-related disparity, we conducted the integrated analysis, combing single-cell RNA sequencing (scRNA-Seq) with spatial transcriptomics, and elucidated six functionally and spatially distinctive macrophage groups and lymphocytes surrounding the ECM scaffolds. Through intergroup comparative analysis and cell-cell communication, we characterized the dysfunction of Spp1+ macrophages in aged mice impeded the activation of the type â ¡ immune response, thus inhibiting the repair ability of epidermal cells and fibroblasts around the ECM scaffolds. These findings contribute to a deeper understanding of biomaterial applications in varied physiological contexts, thereby paving the way for the development of precision-based biomaterials tailored specifically for aged individuals in future therapeutic strategies.
Assuntos
Matriz Extracelular , Macrófagos , Alicerces Teciduais , Cicatrização , Animais , Matriz Extracelular/metabolismo , Alicerces Teciduais/química , Camundongos , Macrófagos/metabolismo , Envelhecimento , Camundongos Endogâmicos C57BL , Fibroblastos/metabolismo , Masculino , Humanos , Materiais Biocompatíveis/químicaRESUMO
PURPOSE: To examine the effects of buccal bone fenestration on maxillary anterior implants. MATERIALS AND METHODS: Patients who underwent implant placement in the maxillary anterior region between January 2017 and December 2021 and had received final restorations 1 to 6 years prior were screened for inclusion in the present study. Propensity score matching was used to match the two-group sample size and reduce the influence of potential confounding factors. Generalised linear mixed models were employed to evaluate the correlation between buccal bone fenestration and peri-implant marginal bone loss. RESULTS: A total of 42 patients with 50 implants were included in the study, 16 of whom had buccal bone fenestration (group 1) and 26 of whom did not (group 2). No implant failures occurred, resulting in a cumulative implant survival rate of 100.0%. There was no statistically significant difference between the pink aesthetic scores for the two groups. The mean marginal bone loss was 0.44 ± 0.46 mm for group 1 and 0.33 ± 0.32 mm for group 2 (P > 0.05). Buccal bone fenestration was not the influencing factor of marginal bone loss (P > 0.05). Marginal bone loss was greater around implants used to replace canines than those inserted to replace central incisors (P < 0.05). Far less marginal bone loss occurred around immediately loaded implants than delayed implants with cover screws (P < 0.05). When there is sufficient keratinised mucosa around the implant, marginal bone loss will decrease significantly (P < 0.05). CONCLUSIONS: Within the limitations of this study, buccal bone fenestration defects around dental implants cannot influence peri-implant bone loss. CONFLICT-OF-INTEREST STATEMENT: The authors report no conflicts of interest relating to this study.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Maxila , Humanos , Estudos Retrospectivos , Masculino , Maxila/cirurgia , Feminino , Pessoa de Meia-Idade , Adulto , Implantação Dentária Endóssea/métodos , Idoso , Pontuação de PropensãoRESUMO
OBJECTIVE: To evaluate the three-dimensional (3D) stability and accuracy of additively manufactured surgical templates fabricated using two different 3D printers and materials. MATERIALS AND METHODS: Forty surgical templates were designed and printed using two different 3D printers: the resin group (n = 20) used a digital light processing (DLP) 3D printer with photopolymer resin, and the metal group (n = 20) employed a selective laser melting (SLM) 3D printer with titanium alloy. All surgical templates were scanned immediately after production and re-digitalized after one month of storage. Similarly, the implant simulations were performed twice. Three-dimensional congruency between the original design and the manufactured surgical templates was quantified using the root mean square (RMS), and the definitive and planned implant positions were determined and compared. RESULTS: At the postproduction stage, the metal templates exhibited higher accuracy than the resin templates (p < 0.001), and these differences persisted after one month of storage (p < 0.001). The resin templates demonstrated a significant decrease in three-dimensional stability after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). No significant differences in implant accuracy were found between the two groups. However, the resin templates showed a significant increase in apical and angular deviations after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). CONCLUSION: Printed metal templates showed higher fabrication accuracy than printed resin templates. The three-dimensional stability and implant accuracy of printed metal templates remained unaffected by one month of storage. CLINICAL SIGNIFICANCE: With superior three-dimensional stability and acceptable implant accuracy, printed metal templates can be considered a viable alternative technique for guided surgery.
Assuntos
Impressão Tridimensional , Titânio , Humanos , Titânio/química , Desenho Assistido por Computador , Lasers , Implantes Dentários , Ligas/química , Imageamento Tridimensional/métodos , Implantação Dentária Endóssea/instrumentação , Implantação Dentária Endóssea/métodos , Materiais Dentários/química , Ligas Dentárias/química , Teste de MateriaisRESUMO
OBJECTIVES: To identify the risk indicators and develop and validate a nomogram prediction model of implant apical non-coverage by comprehensively analyzing clinical and radiographic factors in bone-added transcrestal sinus floor elevation (TSFE). MATERIAL AND METHODS: A total of 260 implants in 195 patients receiving bone-added TSFE were included in the study. The population was divided into a development (180 implants) and a validation (80 implants) cohort. According to 6 months post-surgery radiographic images, implants were categorized as "apical non-coverage" or "apical covered." The association of risk factors including clinical and radiographic parameters with implant apical non-coverage was assessed using regression analyses. A nomogram prediction model was developed, and its validation and discriminatory ability were analyzed. RESULTS: The nomogram predicting bone-added TSFE's simultaneously placed implant's apex non-coverage after 6 months. This study revealed that sinus angle, endo-sinus bone gain, implant protrusion length, graft contact walls, and distal angle were predictors of implant apical non-coverage. The generated nomogram showed a strong predictive capability (area under the curve [AUC] = 0.845), confirmed by internal validation using 10-fold cross-validation (Median AUC of 0.870) and temporal validation (AUC = 0.854). The calibration curve and decision curve analysis demonstrated good performance and high net benefit of the nomogram, respectively. CONCLUSIONS: The clinical implementation of the present nomogram is suitable for predicting the apex non-coverage of implants placed simultaneously with bone-added TSFE after 6 months.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Humanos , Implantação Dentária Endóssea/métodos , Levantamento do Assoalho do Seio Maxilar/métodos , Estudos Retrospectivos , Nomogramas , Seio Maxilar/diagnóstico por imagem , Seio Maxilar/cirurgiaRESUMO
Skin scarring devoid of dermal appendages after severe trauma has unfavorable effects on aesthetic and physiological functions. Here we present a method for large-area wound regeneration using biodegradable aligned extracellular matrix scaffolds. We show that the implantation of these scaffolds accelerates wound coverage and enhances hair follicle neogenesis. We perform multimodal analysis, in combination with single-cell RNA sequencing and spatial transcriptomics, to explore the immune responses around biomaterials, highlighting the potential role of regulatory T cells in mitigating tissue fibrous by suppressing excessive type 2 inflammation. We find that immunodeficient mice lacking mature T lymphocytes show the typical characteristic of tissue fibrous driven by type 2 macrophage inflammation, validating the potential therapeutic effect of the adaptive immune system activated by biomaterials. These findings contribute to our understanding of the coordination of immune systems in wound regeneration and facilitate the design of immunoregulatory biomaterials in the future.
Assuntos
Materiais Biocompatíveis , Cicatrização , Camundongos , Animais , Materiais Biocompatíveis/farmacologia , Cicatrização/fisiologia , Cicatriz/patologia , Folículo Piloso , Inflamação/patologia , Pele/patologiaRESUMO
To evaluate the modified star-shaped incision on gingival sulcus for reducing horizontal food impaction around implant-supported restoration. Total 24 patients receiving bone-level implant placement were enrolled, a star-shaped incision was made on the gingiva sulcus before the placement of zirconia crown. Follow-up examination was carried out 3 and 6 months after final restoration, respectively. Assessment of soft tissue includes papilla height, modified plaque index, modified sulcus bleeding index, periodontal depth, gingival biotype and gingival margin level. Marginal bone level was measured on periapical radiographs. Only 1 patient complained about the horizontal food impaction. Both the mesial and distal papilla almost filled the entire proximal space, in good harmony with the adjacent papillae. No recession of the gingival margin was found around the crown even in the patients with thin gingival biotype. Other parameters of soft tissue including modified plaque index, modified sulcus bleeding index and periodontal depth remained low during the whole follow-up visit. The resorption of marginal crestal bone was less than 0.6 mm during the first 6 month, and there was no significant difference among baseline, 3-month and 6-month visit. The modified star-shaped incision on the gingiva sulcus maintained the gingival papilla height and reduced the occurrence of horizontal food impaction, and no recession of the gingiva margin was found around implant-supported restoration.
Assuntos
Membros Artificiais , Ferida Cirúrgica , Humanos , Gengiva/cirurgia , Implantação de Prótese , Ferida Cirúrgica/cirurgia , Coroas , SeguimentosRESUMO
AIM: To evaluate the effectiveness and complications of the cushioned grind-out technique. The primary outcome was endo-sinus bone gain (ESBG), while secondary outcomes included the Schneiderian membrane perforation rate and mid- to long-term implant survival. MATERIALS AND METHODS: In this retrospective study, we compared the cushioned grind-out technique with the classic osteotome technique, establishing statistical models to assess ESBG, membrane perforation rate and implant survival rate. RESULTS: A total of 259 patients and 340 implants were included. The mean ESBG was 5.31 mm for the cushioned grind-out group and 4.64 mm for the osteotome group. Multivariable regression analysis revealed that the cushioned grind-out technique significantly facilitated ESBG (p = .028). Nineteen preparation sites experienced membrane perforation, with rates of 5.5% and 6.4% for the cushioned grind-out and osteotome groups, respectively. However, the difference was not statistically significant (p = .920). Additionally, the cumulative survival rate of the implants for 7 years was 95.2% and 91.4%, respectively, with the surgical technique not significantly influencing the results. CONCLUSIONS: With 6 months to 7 years of post-prosthetic restoration review data, our findings show that the cushioned grind-out technique facilitates a higher ESBG, with no significant difference in membrane perforation or implant failure rate.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Humanos , Estudos Retrospectivos , Implantes Dentários/efeitos adversos , Seguimentos , Levantamento do Assoalho do Seio Maxilar/efeitos adversos , Levantamento do Assoalho do Seio Maxilar/métodos , Implantação Dentária Endóssea/efeitos adversos , Implantação Dentária Endóssea/métodos , Seio Maxilar/cirurgia , Maxila/cirurgiaRESUMO
Sinus floor elevation (SFE) by transcrestal approach has been proven to be a predictable and minimally invasive treatment that augments posterior maxilla with insufficient bone height, allowing the prosthetic rehabilitation of this area with dental implants. However, precise and sufficient elevation of the Schneiderian membrane without perforation is challenging through this blind technique especially in the presence of anatomical restrictions. This note describes a novel technique combining a surgical template and an absorbable collagen sponge (ACS) strip for transcrestal SFE in the oblique sinus floor. A surgical template was used to locate the oblique sinus floor and a collagen strip was placed to orient membrane elevation, meanwhile, protect the sinus membrane. Within the limits of present observation, this technique may increase the manipuility while reducing the risk of complications.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Humanos , Levantamento do Assoalho do Seio Maxilar/métodos , Seio Maxilar/cirurgia , Implantação Dentária Endóssea/métodos , ColágenoRESUMO
OBJECTIVES: This study aimed to evaluate the effects of the cushioned grind-out technique transcrestal sinus floor elevation for simultaneous implant placement with ≤4 mm of residual bone height (RBH). MATERIALS AND METHODS: This was a retrospective propensity score matching (PSM) study. Five PSM analyses included the confounding variables of Schneiderian membrane perforation, early and late implant failure, and peri-implant apical and marginal bone resorption. After PSM, we compared the difference in five aspects between the RBH ≤ 4 and >4 mm groups. RESULTS: A total of 214 patients with 306 implants were included in this study. After PSM, the generalized linear mixed model (GLMM) indicated that RBH ≤ 4 mm had no significantly higher risk of Schneiderian membrane perforation and early and late implant failure (p = .897, p = .140, p = .991, respectively). The implant cumulative 7-year survival rate of the RBH ≤ 4 and >4 mm groups was 95.5% and 93.9%, respectively (log-rank test: p = .900). Within at least 40 cases per group after PSM, two multivariate GLMMs indicated that RBH ≤ 4 mm could not be identified as the promotive factor of bone resorption of either endo-sinus bone gain or crest bone level (RBH × time interaction p = .850, p = .698, respectively). CONCLUSIONS: Within the limitations, 3 months to 7 years of post-prosthetic restoration review data indicated an acceptable mid-term survival and success rate of applying the cushioned grind-out technique in RBH ≤ 4 mm cases.
Assuntos
Reabsorção Óssea , Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Humanos , Implantação Dentária Endóssea/métodos , Estudos Retrospectivos , Levantamento do Assoalho do Seio Maxilar/métodos , Seguimentos , Maxila/cirurgia , Resultado do Tratamento , Seio Maxilar/cirurgia , AtrofiaRESUMO
OBJECTIVES: This study aimed to analyze the effect of the apex coverage by the bone graft, including exposure and coverage less than or greater than 2 mm on implant survival rate and peri-implant bone and soft tissue remodeling. MATERIALS AND METHODS: A total of 264 implants in 180 patients who had undergone transcrestal sinus floor elevation (TSFE) with simultaneous implant placement were included in this retrospective cohort study. Radiographic assessment was used to categorize the implants into three groups based on apical implant bone height (ABH): ≤ 0 mm, < 2 mm, or ≥ 2 mm. The implant survival rate, peri-implant marginal bone loss (MBL) during short-term (1-3 years) and mid- to long-term (4-7 years) follow-up, and clinical parameters were used to evaluate the effect of implant apex coverage after TSFE. RESULTS: Group 1 had 56 implants (ABH ≤ 0 mm), group 2 had 123 implants (ABH > 0 mm, but < 2 mm), and group 3 had 85 implants (ABH ≥ 2 mm). There was no significant difference in the implant survival rate between groups 2 and 3 compared to group 1 (p = 0.646, p = 0.824, respectively). The MBL during short-term and mid- to long-term follow-up indicated that apex coverage could not be considered a risk factor. Furthermore, apex coverage did not have a significant effect on other clinical parameters. CONCLUSIONS: Despite limitations, our study found that implant apex coverage by the bone graft, including exposure and coverage levels less than or greater than 2 mm, did not significantly affect implant survival, short-term or mid- to long-term MBL, or peri-implant soft tissue outcomes. CLINICAL RELEVANCE: Based on 1- to 7-year data, the study suggests that implant apical exposure and coverage levels of less than or greater than 2 mm bone graft are both valid options for TSFE cases.
Assuntos
Implantes Dentários , Seio Maxilar , Humanos , Levantamento do Assoalho do Seio Maxilar , Seio Maxilar/diagnóstico por imagem , Seio Maxilar/cirurgia , Estudos Retrospectivos , Estudos de Coortes , Masculino , Feminino , Adolescente , Adulto , Pessoa de Meia-Idade , Idoso , Tomografia Computadorizada de Feixe CônicoRESUMO
Biomaterials are one of efficient treatment options for tissue defects in regenerative medicine. Compared to synthetic materials which tend to induce chronic inflammatory response and fibrous capsule, extracellular matrix (ECM) scaffold materials composed of biopolymers are thought to be capable of inducing a pro-regenerative immune microenvironment and facilitate wound healing. Immune cells are the first line of response to implanted biomaterials. In particular, macrophages greatly affect cell behavior and the ultimate treatment outcome based on multiple cell phenotypes with various functions. The macrophage polarization status is considered as a general reflection of the characteristics of the immune microenvironment. Since numerous reports has emphasized the limitation of classical M1/M2 nomenclature, high-resolution techniques such as single-cell sequencing has been applied to recognize distinct macrophage phenotypes involved in host responses to biomaterials. After reviewing latest literatures that explored the immune microenvironment mediated by ECM scaffolds, this paper describe the behaviors of highly heterogeneous and plastic macrophages subpopulations which affect the tissue regeneration. The mechanisms by which ECM scaffolds interact with macrophages are also discussed from the perspectives of the ECM ultrastructure along with the nucleic acid, protein, and proteoglycan compositions, in order to provide targets for potential therapeutic modulation in regenerative medicine.
Assuntos
Materiais Biocompatíveis , Macrófagos , Humanos , Macrófagos/metabolismo , Materiais Biocompatíveis/metabolismo , Matriz Extracelular/metabolismo , Inflamação/metabolismo , Medicina Regenerativa/métodos , Alicerces Teciduais/químicaRESUMO
The objectives of this study were to observe hard tissue changes in guided bone regeneration (GBR) with intact periosteum and soft block deproteinised bovine bone mineral (DBBM), and evaluate whether the result of horizontal bone augmentation varied by initial peri-implant defect depth. Forty patients with a single missing tooth and contained peri-implant defect were categorised into three groups according to their presurgical defect depth (≤ 2, 2-4, and 4-6 mm). Cone-beam computed tomography (CBCT) images were collected and reconstructed preoperatively, postoperatively, and at six months' follow up. The buccal bone width (BBW -0, -3, -5), alveolar bone width (ABW -0, -3, -5) and volume of augmented area were measured. At the six-month follow up the increase in BBW, ABW at all levels, and in bone volume, was statistically significant (all p < 0.001). No statistical significance in bone dimensions or bone resorption was found among groups (all p > 0.05). Histological analysis detected new bone formation in intimate contact with bone grafts underlying the periosteum. Within the limitations of this study, the insights gained may be of assistance to suggest that comparable and acceptable results of horizontal bone augmentation can be achieved in cases of peri-implant defect depth of ≤6 mm by means of GBR with intact periosteum.
Assuntos
Aumento do Rebordo Alveolar , Implantes Dentários , Humanos , Animais , Bovinos , Implantação Dentária Endóssea/métodos , Periósteo/cirurgia , Estudos Retrospectivos , Regeneração Tecidual Guiada Periodontal/métodos , Regeneração Óssea , Aumento do Rebordo Alveolar/métodosRESUMO
OBJECTIVES: This study aimed to introduce a digitally guided in situ autogenous onlay grafting technique and compare its effectiveness with the conventional (ex situ) onlay technique in augmenting horizontal bone defects of the anterior maxilla. MATERIALS AND METHODS: This retrospective cohort study included 24 patients who had received autogenous onlay bone grafts combined with guided bone regeneration (GBR) in the anterior maxilla. Fourteen patients were recruited into the in situ onlay grafting group (EG), and 10 were recruited into the ex situ onlay group (CG), defined by the donor sites. The clinical parameters, radiographic changes, micro-CT, and histological processes were evaluated after a mean follow-up period of 1.7 years. RESULTS: The horizontal bone width reflected significant bone modeling over time (p < 0.001) in the first 6 months. Multivariable analysis showed that the treatment modality (grouping) was a critical factor positively associated with vertical bone height alteration. However, neither the alteration rate of horizontal bone width nor the bone volume was associated with the treatment modality. The number of periosteal screws per graft positively affected horizontal contour maintenance (p < 0.05). No significant differences were observed between the groups in the clinical parameters (complications, success rate, and peri-implant parameters). The micro-CT and histological outcomes were similar between the groups. CONCLUSION: Despite the limitations of this study, in situ onlay grafting combined with GBR was an effective and reliable approach for horizontal bone augmentation in the anterior maxilla and appeared to demonstrate better stability in vertical bone remodeling. CLINICAL RELEVANCE: This study introduces a modified and minimally invasive technique of onlay grafting for horizontal bone augmentation. This in situ onlay grafting demonstrates superior stability in vertical bone remodeling. The trial registration number is ChiCTR2100054683.
Assuntos
Aumento do Rebordo Alveolar , Implantes Dentários , Aumento do Rebordo Alveolar/métodos , Transplante Ósseo/métodos , Implantação Dentária Endóssea/métodos , Humanos , Maxila/patologia , Maxila/cirurgia , Estudos RetrospectivosRESUMO
The usage of bone substitute granule materials has improved the clinical results of alveolar bone deficiencies treatment and thus broadened applications in implant dentistry. However, because of the complicated mechanisms controlling the foreign body response, no perfect solution can avoid the fibrotic encapsulation of materials till now, which may impair the results of bone regeneration, even cause the implant materials rejection. Recently, the concept of 'osteoimmunology' has been stressed. The outcomes of bone regeneration are proved to be related to the bio-physicochemical properties of biomaterials, which allow them to regulate the biological behaviours of both innate and adaptive immune cells. With the development of single cell transcriptome, the truly heterogeneity of osteo-immune cells has been clarifying, which is helpful to overcome the limitations of traditional M1/M2 macrophage nomenclature and drive the advancements of particulate biomaterials applications. This review aims at introducing the mechanisms of optimal osseointegration regulated by immune systems and provides feasible strategies for the design of next generation 'osteoimmune-smart' particulate bone substitute materials in dental clinic.
Assuntos
Substitutos Ósseos , Materiais Biocompatíveis/química , Regeneração Óssea , Substitutos Ósseos/química , Osso e Ossos , OsseointegraçãoRESUMO
Topographical properties, such as pattern and diameter, of biomaterials play important roles in influencing cell activities and manipulating the related immune response during wound healing. We prepared aligned electrospinning membranes with different fiber diameters, including 319 ± 100 nm (A300), 588 ± 132 nm (A600), and 1048 ± 130 nm (A1000), by adjusting the distance from the tip to the collector, the injection rate, and the concentration of the solution. The A300 membranes significantly improved cell proliferation and spreading and facilitated wound healing (epithelization and vascularization) with the regeneration of immature hair follicles compared to the other membranes. Transcriptomics revealed the underlying molecular mechanism that A300 could promote immune-related processes towards a pro-healing direction, significantly promoting keratinocyte migration and skin wound healing. All the results indicated that wound healing requires the active participation of the immune process, and that A300 was a potential candidate for guided skin regeneration applications.
RESUMO
Periodontitis would cause dental tissue damage locally. Biomaterials substantially affect the surrounding immune microenvironment through treatment-oriented local inflammatory remodeling in dental periodontitis. This remodeling process is conducive to wound healing and periodontal tissue regeneration. Recent progress in understanding the foreign body response (FBR) and immune regulation, including cell heterogeneity, and cell-cell and cell-material interactions, has provided new insights into the design criteria for biomaterials applied in treatment of periodontitis. This review discusses recent progress and perspectives in the immune regulation effects of biomaterials to augment or reconstruct soft and hard tissue in an inflammatory microenvironment of periodontitis.
Assuntos
Corpos Estranhos , Periodontite , Materiais Biocompatíveis , Humanos , Inflamação , Ligamento Periodontal , Periodontite/terapiaRESUMO
BACKGROUND: To evaluate a cross-shaped incision technique for thick-gingiva and thin-gingiva patients treated with implant-supported fixed prosthesis. METHODS: Total 55 patients receiving cross-shaped incision were assigned into thick-gingiva group (29 cases) and thin-gingiva group (26 cases). Follow-up was performed at 3 and 12-month after final restoration. RESULTS: Mesial and distal papilla height was significantly greater in thick-gingiva group than thin-gingiva group at 3 and 12 months, while periodontal depth and crestal marginal bone level around implant had no significant difference between the two groups during follow-up. No case of recession of buccal marginal gingiva was observed in thick-gingiva group. However, the recession of marginal gingiva of buccal aspect of the crown was found in 5 patients (19.2%) with thin-gingiva. CONCLUSIONS: The cross-shaped incision may be applied to reconstruct gingival papillae and avoid the gingival recession in patients with thick-gingiva phenotype. Trial registration This study was registered at ClinicalTrials.gov (registration number NCT04706078, date 12 January 2021, Retrospectively registered).
Assuntos
Implantes Dentários para Um Único Dente , Implantes Dentários , Doenças da Gengiva , Retração Gengival , Seguimentos , Gengiva , Retração Gengival/cirurgia , HumanosRESUMO
The chemically cross-linking 1-ethyl-3-(3-dimethylaminopropylcarbodiimide hydrochloride/N-hydroxy-succinimide (EDC/NHS) collagen membrane endows such natural polymers with promising mechanical properties. Nevertheless, it is inadequate to advance the modulation of foreign body response (FBR) after implantation or guidance of tissue regeneration. In previous research, macrophages have a strong regulatory effect on regeneration, and such enhanced membranes underwent the modification with Epigallocatechin-3-gallate (EGCG) could adjust the recruitment and phenotypes of macrophages. Accordingly, we develop EGCG-EDC/NHS membranes, prepared with physical immersion, while focusing on the surface morphology through SEM, the biological activity of collagen was determined by FTIR, the activity and adhesion of cell culture in vitro, angiogenesis and monocyte/macrophage recruitment after subcutaneous implantation in vivo, are characterized. It could be concluded that it is hopeful EGCG-EDC/NHS collagen membrane can be used in implant dentistry for it not only retains the advantages of the collagen membrane itself, but also improves cell viability, adhesion, vascularization, and immunoregulation tendency.
RESUMO
The structural properties of biomaterials play crucial roles in guiding cell behavior and influencing immune responses against the material. We fabricated electrospun membranes with three types of surface topography (random, aligned, and latticed), introduced them to dorsal skin excisional wounds in mice and rats, and evaluated their effects on wound healing and immunomodulatory properties. An overview of different immune cells in the microenvironment with the help of single-cell RNA sequencing revealed diverse cellular heterogeneity in vivo. The time course of immune response was advanced toward an adaptive immunity-dominant stage by the aligned scaffold. In mice without mature T lymphocytes, lack of wound-induced hair neogenesis indicated a regulatory role of T cells on hair follicle regeneration. The microenvironment around scaffolds involved an intricate interplay of immune and cutaneous cells.