Synthesis of the Antimicrobial Peptide Murepavadin Using Novel Coupling Agents.

The problem of antimicrobial resistance is becoming a daunting challenge for human society and healthcare systems around the world. Hence, there is a constant need to develop new antibiotics to fight resistant bacteria, among other important social and economic measures. In this regard, murepavadin is a cyclic antibacterial peptide in development. The synthesis of murepavadin was undertaken in order to optimize the preparative protocol and scale-up, in particular, the use of new activation reagents. In our hands, classical approaches using carbodiimide/hydroxybenzotriazole rendered low yields. The use of novel carbodiimide and reagents based on OxymaPure® and Oxy-B is discussed together with the proper use of chromatographic conditions for the adequate characterization of peptide crudes. Higher yields and purities were obtained. Finally, the antimicrobial activity of different synthetic batches was tested in three Pseudomonas aeruginosa strains, including highly resistant ones. All murepavadin batches yielded the same highly active MIC values and proved that the chiral integrity of the molecule was preserved throughout the whole synthetic procedure.

Linker-Free Synthesis of Antimicrobial Peptides Using a Novel Cleavage Reagent: Characterisation of the Molecular and Ionic Composition by nanoESI-HR MS.

The efficient preparation of novel bioactive peptide drugs requires the availability of reliable and accessible chemical methodologies together with suitable analytical techniques for the full characterisation of the synthesised compounds. Herein, we describe a novel acidolytic method with application to the synthesis of cyclic and linear peptides involving benzyl-type protection. The process consists of the in situ generation of anhydrous hydrogen bromide and a trialkylsilyl bromide that acts as protic and Lewis acid reagents. This method proved to be useful to effectively remove benzyl-type protecting groups and cleave Fmoc/tBu assembled peptides directly attached to 4-methylbenzhydrylamine (MBHA) resins with no need for using mild trifluoroacetic acid labile linkers. The novel methodology was successful in synthesising three antimicrobial peptides, including the cyclic compound polymyxin B3, dusquetide, and RR4 heptapeptide. Furthermore, electrospray mass spectrometry (ESI-MS) is successfully used for the full characterisation of both the molecular and ionic composition of the synthetic peptides.

The Biomolecules Journal Club: Highlights on Recent Papers-1.

We are glad to share with you our first Journal Club and to highlight some of the most interesting papers published recently [...].

Unveiling the Membrane and Cell Wall Action of Antimicrobial Cyclic Lipopeptides: Modulation of the Spectrum of Activity.

Antibiotic resistance is a major public health challenge, and Gram-negative multidrug-resistant bacteria are particularly dangerous. The threat of running out of active molecules is accelerated by the extensive use of antibiotics in the context of the COVID-19 pandemic, and new antibiotics are urgently needed. Colistin and polymyxin B are natural antibiotics considered as last resort drugs for multi-resistant infections, but their use is limited because of neuro- and nephrotoxicity. We previously reported a series of synthetic analogues inspired in natural polymyxins with a flexible scaffold that allows multiple modifications to improve activity and reduce toxicity. In this work, we focus on modifications in the hydrophobic domains, describing analogues that broaden or narrow the spectrum of activity including both Gram-positive and Gram-negative bacteria, with MICs in the low µM range and low hemolytic activity. Using biophysical methods, we explore the interaction of the new molecules with model membranes that mimic the bacterial inner and outer membranes, finding a selective effect on anionic membranes and a mechanism of action based on the alteration of membrane function. Transmission electron microscopy observation confirms that polymyxin analogues kill microbial cells primarily by damaging membrane integrity. Redistribution of the hydrophobicity within the polymyxin molecule seems a plausible approach for the design and development of safer and more selective antibiotics.

Investigation of halotolerant marine Staphylococcus sp. CO100, as a promising hydrocarbon-degrading and biosurfactant-producing bacterium, under saline conditions.

A halotolerant strain CO100 of Staphylococcus sp. was isolated from contaminated sediments taken from the fishing harbour of Sfax, Tunisia, as an efficient hydrocarbonoclastic candidate. Strain CO100 exhibited a high capacity to break down almost 72% of the aliphatic hydrocarbons contained in crude oil (1%, v/v), used as the sole carbon and energy source, after 20 days of culture, at 100 g/l NaCl, 37 °C and 180 rpm. The isolate CO100 displayed also its ability to grow on phenanthrene, fluoranthene and pyrene (100 mg/l), at 100 g/l NaCl. Moreover, the isolate CO100 showed a notable aptitude to synthesize an efficient tensioactive agent namely BS-CO100, on low-value substrates including residual frying oil and expired milk powder, thus reducing the high cost of biosurfactant production. The ESI/MS analysis designated that BS-CO100 belonged to lipopeptide class, in particular lichenysin and iturine members. Critical micelle concentrations of BS-CO100 were varying between 65 and 750 mg/l, depending on of the purity of the biosurfactant and the used carbon sources. BS-CO100 showed a high steadiness against a wide spectrum of pH (4.3-12), temperature (4-121 °C) and salinity (0-300 g/l NaCl), supporting its powerful tensioactive properties under various environmental conditions. Likewise, BS-CO100 exhibited no cytotoxic effect toward human HEK293 cells, at concentrations within 125 and 1000 µg/ml. Furthermore, the biosurfactant BS-CO100 exhibited remarkable anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, BS-CO100 was found to have more potential to remove hydrocarbons from contaminated soils, compared to some chemical surfactants. In light of these promising findings, strain CO100, as well as its biosurfactant, could be successfully used in different biotechnological applications including the bioremediation of oil-polluted areas, even under saline conditions.

State-of-the-art polymeric nanoparticles as promising therapeutic tools against human bacterial infections.

Infectious diseases kill over 17 million people a year, among which bacterial infections stand out. From all the bacterial infections, tuberculosis, diarrhoea, meningitis, pneumonia, sexual transmission diseases and nosocomial infections are the most severe bacterial infections, which affect millions of people worldwide. Moreover, the indiscriminate use of antibiotic drugs in the last decades has triggered an increasing multiple resistance towards these drugs, which represent a serious global socioeconomic and public health risk. It is estimated that 33,000 and 35,000 people die yearly in Europe and the United States, respectively, as a direct result of antimicrobial resistance. For all these reasons, there is an emerging need to find novel alternatives to overcome these issues and reduced the morbidity and mortality associated to bacterial infectious diseases. In that sense, nanotechnological approaches, especially smart polymeric nanoparticles, has wrought a revolution in this field, providing an innovative therapeutic alternative able to improve the limitations encountered in available treatments and capable to be effective by theirselves. In this review, we examine the current status of most dangerous human infections, together with an in-depth discussion of the role of nanomedicine to overcome the current disadvantages, and specifically the most recent and innovative studies involving polymeric nanoparticles against most common bacterial infections of the human body.

Isolation and characterization of kurstakin and surfactin isoforms produced by Enterobacter cloacae C3 strain.

In this work, the extraction, structural analysis, and identification as well as antimicrobial, anti-adhesive, and antibiofilm activities of lipopeptides produced by Enterobacter cloacae C3 strain were studied. A combination of chromatographic and spectroscopic techniques offers opportunities for a better characterization of the biosurfactant structure. Thin layer chromatography (TLC) and HPLC for amino acid composition determination are used. Efficient spectroscopic techniques have been utilized for investigations on the biochemical structure of biosurfactants, such as Fourier transform infrared (FT-IR) spectroscopy and mass spectrometry analysis. This is the first work describing the production of different isoforms belonging to kurstakin and surfactin families by E cloacae strain. Three kurstakin homologues differing by the fatty acid chain length from C10 to C12 were detected. The spectrum of lipopeptides belonging to surfactin family contains various isoforms differing by the fatty acid chain length as well as the amino acids at positions four and seven. Lipopeptide C3 extract exhibited important antibacterial activity against Gram-positive and Gram-negative bacteria, antifungal activity, and interesting anti-adhesive and disruptive properties against biofilm formation by human pathogenic bacterial strains: Salmonella typhimurium, Klebsiella pneumoniae, Staphylococcus aureus, Bacillus cereus, and Candida albicans.

Production, characterization and biotechnological potential of lipopeptide biosurfactants from a novel marine Bacillus stratosphericus strain FLU5.

This work aimed at studying the potential of a new hydrocarbonoclastic marine bacterium, Bacillus stratosphericus FLU5, to produce an efficient surface-active agent BS-FLU5. Biosurfactant production was examined on different carbon sources; using the surface tension measurement and the oil displacement test. Strain FLU5 showed its capacity to produce biosurfactants from all tested substrates, in particular the residual frying oil, which is a cheap renewable carbon source alternative, thus minimizing the high cost of producing those surfactants. MALDI-TOF MS/MS analysis confirmed the presence of lipopeptides, which are identified as members of surfactin and pumilacidin series. The critical micelle concentration (CMC) of the purified lipopeptides produced by strain FLU5 was 50 mg/l. At this concentration, the surface tension of the water was reduced from 72 to 28 mN/m. Furthermore, the crude lipopeptides showed an interesting stability against a broad range of pH, temperature and salinity. In addition, the application of BS-FLU5 in oil recovery from hydrocarbons-contaminated soil (used motor oil) showed that it was more effective on the hydrocarbon-remobilization than some tested synthetic surfactants. Interestingly, the biosurfactant BS-FLU5 showed a negligible cytotoxic effect against the mammalian cells HEK293. These results highlight the applicability of the lipopeptides BS-FLU5 in different fields, especially in environmental remediation processes.

Novel synthetic polymyxins kill Gram-positive bacteria.

Background: Staphylococcus aureus, including 'superbug' MRSA, is a major cause of nosocomial infections. In the European Union, up to 171 200 new nosocomial MRSA infections are acquired annually, and in the USA S. aureus causes more deaths than HIV/AIDS and tuberculosis combined. MRSA is also the first group of pathogens that infect the pulmonary tract in young patients with cystic fibrosis. Objectives: We describe two newly developed and synthesized colistin (polymyxin E)-inspired molecules. Methods: A collection of several isolates of S. aureus [including MRSA and vancomycin-resistant S. aureus (VRSA)] was tested. To check the antimicrobial activity, we performed time-kill curves, growth curves, biofilm eradication, toxicity and isothermal titration calorimetry. Results: Both peptides showed high antimicrobial activities (MIC 4 mg/L) and low relative toxicities (selectivity index close to 23). Conclusions: Successful production of polymyxin-scaffold molecules active against S. aureus, both MRSA and VRSA, opens up new approaches to the treatment of these complicated infections.

Helix Fraying and Lipid-Dependent Structure of a Short Amphipathic Membrane-Bound Peptide Revealed by Solid-State NMR.

The amphipathic α-helical peptide KIA14 [(KIAGKIA)2-NH2] was studied in membranes using circular dichroism and solid-state NMR spectroscopy to obtain global as well as local structural information. By analyzing 2H NMR data from 10 analogues of KIA14 that were selectively labeled with Ala- d3, those positions that are properly folded into a helix could be determined within the membrane-bound peptide. The N-terminus was found to be unraveled, whereas positions 4-14 formed an ideal helix all the way to the C-terminus. The helicity did not change when Gly residues were replaced by Ala- d3 but was reduced when Ile was replaced, indicating that large hydrophobic residues are required for membrane binding and helix formation. The reduced helicity was strongly correlated with a decrease in peptide-induced leakage from lipid vesicles. The orientation of the short KIA14 peptide was assessed in several lipid systems and compared with that of the longer KIA21 sequence [(KIAGKIA)3-NH2]. In 1,2-dioleoyl- sn-glycero-3-phosphatidylcholine, both peptides are aligned flat on the membrane surface, whereas in 1,2-dimyristoyl- sn-glycero-3-phosphatidylcholine (DMPC)/1-myristoyl-2-hydroxy- sn-glycero-3-phosphatidylcholine (lyso-MPC) both are inserted into the membrane in an upright orientation. These two types of lipid systems had been selected for their strongly negative and positive spontaneous curvature, respectively. We propose that in these cases, the peptide orientation is largely determined by the lipid properties. On the other hand, in plain DMPC and 1,2-dilauroyl- sn-glycero-3-phosphatidylcholine, which have only a slight positive curvature, a marked difference in orientation is evident: the short KIA14 lies almost flat on the membrane surface, whereas the longer KIA21 is more tilted. We thus propose that out of the lipid systems tested here, DMPC (with hardly any curvature) is the least biased lipid system in which peptide orientation and realignment can be studied, allowing to compare and discriminate the intrinsic effects of the properties of the peptides as such.

Structural characterization and identification of cyclic lipopeptides produced by Bacillus methylotrophicus DCS1 strain.

Bacillus methylotrophicus DCS1 strain was isolated from diesel contaminated soil and screened for its ability to produce biosurfactants; it was found effective for the production of surface active molecules. The structural characterization of the isolated lipopeptides was studied by a variety of analytical techniques. The organic extract of DCS1 lipopeptides was fractionated by silica gel column chromatography (60Mesh). Fractions containing lipopeptides were collected and identified by tandem mass spectrometry MALDI-TOF-MS and MALDI-TOF MS2. The crude biosurfactants contains a mixture of homologous lipopeptides with molecular weights between 1016 and 1556Da. Mass spectrometry analysis of partially purified lipopeptides revealed that it contains different isoforms belonging to three families: surfactin, iturin and fengycin. To identify lipopeptides isoforms, MALDI-TOF MS2 was used and ions representing characteristic fragmentations were detected. The mass spectrometry characterization revealed the presence of four variants of surfactin lipopeptides, four variants of pumilacidin that differ according to the ß-hydroxy fatty acid chain length as well as the type of amino acid at position 7, five variants of iturin A/mycosubtilin varying in the ß-amino fatty acid chain length from C12 to C16, C16 iturin C1, five isoforms of bacillomycin D varying in the ß-amino fatty acid chain length from C14 to C18, and six fengycin isoforms that differ according to the length of the ß-hydroxy fatty acid side chain as well as the amino acid at position 6. The capacity of B. methylotrohicus DCS1 strain to produce many lipopeptides isoforms belonging to different families and having a structural diversity is a very interesting characteristic that allows them to be used in various fields of biotechnological applications.

Recent advances and perspectives in the design and development of polymyxins.

Covering: 1947-early 2017, particularly from 2005-early 2017The rise of bacterial pathogens with acquired resistance to almost all available antibiotics is becoming a serious public health issue. Polymyxins, antibiotics that were mostly abandoned a few decades ago because of toxicity concerns, are ultimately considered as a last-line therapy to treat infections caused by multi-drug resistant Gram-negative bacteria. This review surveys the progress in understanding polymyxin structure, and their chemistry, mechanisms of antibacterial activity and nephrotoxicity, biomarkers, synergy and combination with other antimicrobial agents and antibiofilm properties. An update of recent efforts in the design and development of a new generation of polymyxin drugs is also discussed. A novel approach considering the modification of the scaffold of polymyxins to integrate metabolism and detoxification issues into the drug design process is a promising new line to potentially prevent accumulation in the kidneys and reduce nephrotoxicity.

An overview of antimicrobial peptides and the latest advances in their development.

INTRODUCTION: The recent dramatic increase in the incidence of antimicrobial resistance has been recognized by organizations such as the United Nations and World Health Organization as well as the governments of the USA and several European countries. A relatively new weapon in the fight against severe infections caused by multi-drug resistant bacteria is antimicrobial peptides (AMPs). These include colistin, currently regarded as the last line of antimicrobial therapy against multi-drug resistant microorganisms. Areas covered: Here, the authors provide an overview of the current research on AMPs. The focus is AMPs currently being developed for the treatment of recalcitrant bacterial infections, the synergies of AMPs and antibiotics, and the activity of AMPs against biofilm. This review also includes a brief introduction into the use of AMPs in infections caused by Mycobacterium, fungi, and parasites. Expert opinion: In research into new antimicrobials, AMPs are gaining increasing attention. While many are natural and are produced by a wide variety of organisms, others are being newly designed and chemically synthesized in the laboratory to achieve novel antimicrobial agents. The same strategy to fight infections in nature is thus being effectively exploited to safeguard human and animal health.

Influence of the Length and Charge on the Activity of α-Helical Amphipathic Antimicrobial Peptides.

Hydrophobic mismatch is important for pore-forming amphipathic antimicrobial peptides, as demonstrated recently [Grau-Campistany, A., et al. (2015) Sci. Rep. 5, 9388]. A series of different length peptides have been generated with the heptameric repeat sequence KIAGKIA, called KIA peptides, and it was found that only those helices sufficiently long to span the hydrophobic thickness of the membrane could induce leakage in lipid vesicles; there was also a clear length dependence of the antimicrobial and hemolytic activities. For the original KIA sequences, the cationic charge increased with peptide length. The goal of this work is to examine whether the charge also has an effect on activity; hence, we constructed two further series of peptides with a sequence similar to those of the KIA peptides, but with a constant charge of +7 for all lengths from 14 to 28 amino acids. For both of these new series, a clear length dependence similar to that of KIA peptides was observed, indicating that charge has only a minor influence. Both series also showed a distinct threshold length for peptides to be active, which correlates directly with the thickness of the membrane. Among the longer peptides, the new series showed activities only slightly lower than those of the original KIA peptides of the same length that had a higher charge. Shorter peptides, in which Gly was replaced with Lys, showed activities similar to those of KIA peptides of the same length, but peptides in which Ile was replaced with Lys lost their helicity and were less active.

Synergistic Antipseudomonal Effects of Synthetic Peptide AMP38 and Carbapenems.

The aim was to explore the antimicrobial activity of a synthetic peptide (AMP38) and its synergy with imipenem against imipenem-resistant Pseudomonas aeruginosa. The main mechanism of imipenem resistance is the loss or alteration of protein OprD. Time-kill and minimal biofilm eradication concentration (MBEC) determinations were carried out by using clinical imipenem-resistant strains. AMP38 was markedly synergistic with imipenem when determined in imipenem-resistant P. aeruginosa. MBEC obtained for the combination of AMP38 and imipenem was of 62.5 µg/mL, whereas the MBEC of each antimicrobial separately was 500 µg/mL. AMP38 should be regarded as a promising antimicrobial to fight MDR P. aeruginosa infections. Moreover, killing effect and antibiofilm activity of AMP38 plus imipenem was much higher than that of colistin plus imipenem.

Extending the Hydrophobic Mismatch Concept to Amphiphilic Membranolytic Peptides.

A series of nine amphiphilic, pore-forming α-helical KIA peptides (KIAGKIA repeats) with lengths between 14 and 28 residues were studied by solid-state (15)N NMR to determine their alignment in oriented lipid bilayers. In a 2:1 mixture of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) with its corresponding 1-myristoyl-2-hydroxy-sn-glycero-3-phosphocholine (lyso-MPC), which has a highly positive spontaneous curvature, the helix tilt angle was found to vary steadily with peptide length. The shortest peptide was aligned transmembrane and upright, while the longer ones successively became tilted away from the membrane normal. This behavior is in agreement with the hydrophobic matching concept, conceived so far only for hydrophobic helices. In 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine, with a negative spontaneous curvature, all KIA peptides remained flat on the bilayer surface, while the cylindrical DMPC lipids permitted a slight tilt. Peptide insertion thus depends critically on the intrinsic lipid curvature, and helix orientation is then fine-tuned by membrane thickness. A refined toroidal pore model is proposed.

Tryptophan-containing lipopeptide antibiotics derived from polymyxin B with activity against Gram positive and Gram negative bacteria.

Resistance to all known antibiotics is a growing concern worldwide, and has renewed the interest in antimicrobial peptides, a structurally diverse class of amphipathic molecules that essentially act on the bacterial membrane. Propelled by the antimicrobial potential of this compound class, we have designed three new lipopeptides derived from polymyxin B, sp-34, sp-96 and sp-100, with potent antimicrobial activity against both Gram positive and Gram negative bacteria. The three peptides bind with high affinity to lipopolysaccharide as demonstrated by monolayer penetration and dansyl-displacement. The interaction with the cytoplasmic membrane has been elucidated by biophysical experiments with model membranes of POPG or POPE/POPG (6:4), mimicking the Gram positive and Gram negative bacterial membrane. Trp-based fluorescence experiments including steady-state, quenching, anisotropy and FRET, reveal selectivity for anionic phospholipids and deep insertion into the membrane. All three lipopeptides induce membrane fusion and leakage from anionic vesicles, a process that is favored by the presence of POPE. The molecules bind to zwitterionic POPC vesicles, a model of the eukaryotic membrane, but in a different way, with lower affinity, less penetration into the bilayer and no fusion or permeabilization of the membrane. Results in model membranes are consistent with flow cytometry experiments in Escherichia coli and Staphylococcus aureus using a membrane potential sensitive dye (bis-oxonol) and a nucleic acid dye (propidium iodide), suggesting that the mechanism of action is based on membrane binding and collapse of membrane integrity by depolarization and permeabilization.

A bioinspired peptide scaffold with high antibiotic activity and low in vivo toxicity.

Bacterial resistance to almost all available antibiotics is an important public health issue. A major goal in antimicrobial drug discovery is the generation of new chemicals capable of killing pathogens with high selectivity, particularly multi-drug-resistant ones. Here we report the design, preparation and activity of new compounds based on a tunable, chemically accessible and upscalable lipopeptide scaffold amenable to suitable hit-to-lead development. Such compounds could become therapeutic candidates and future antibiotics available on the market. The compounds are cyclic, contain two D-amino acids for in vivo stability and their structures are reminiscent of other cyclic disulfide-containing peptides available on the market. The optimized compounds prove to be highly active against clinically relevant Gram-negative and Gram-positive bacteria. In vitro and in vivo tests show the low toxicity of the compounds. Their antimicrobial activity against resistant and multidrug-resistant bacteria is at the membrane level, although other targets may also be involved depending on the bacterial strain.

Hydrophobic mismatch demonstrated for membranolytic peptides, and their use as molecular rulers to measure bilayer thickness in native cells.

Hydrophobic mismatch is a well-recognized principle in the interaction of transmembrane proteins with lipid bilayers. This concept was extended here to amphipathic membranolytic α-helices. Nine peptides with lengths between 14 and 28 amino acids were designed from repeated KIAGKIA motifs, and their helical nature was confirmed by circular dichroism spectroscopy. Biological assays for antimicrobial activity and hemolysis, as well as fluorescence vesicle leakage and solid-state NMR spectroscopy, were used to correlate peptide length with membranolytic activity. These data show that the formation of transmembrane pores is only possible under the condition of hydrophobic matching: the peptides have to be long enough to span the hydrophobic bilayer core to be able to induce vesicle leakage, kill bacteria, and cause hemolysis. By correlating the threshold lengths for biological activity with the biophysical results on model vesicles, the peptides could be utilized as molecular rulers to measure the membrane thickness in different cells.

Improved Fmoc-based solid-phase synthesis of homologous peptide fragments of human and mouse prion proteins.

The synthesis of difficult peptide sequences has been a challenge since the very beginning of SPPS. The self-assembly of the growing peptide chains has been proposed as one of the causes of this synthetic problem. However, there is an increasing need to obtain peptides and proteins that are prone to aggregate. These peptides and proteins are generally associated with diseases known as amyloidoses. We present an efficient SPPS of two homologous peptide fragments of HuPrP (106-126) and MoPrP105-125 based on the use of the PEGA resin combined with proper coupling approaches. These peptide fragments were also studied by CD and TEM to determine their ability to aggregate. On the basis of these results, we support PEG-based resins as an efficient synthetic tool to prepare peptide sequences prone to aggregate on-resin.