Advancing phytomining: Harnessing plant potential for sustainable rare earth element extraction.

Rare earth elements (REEs) are pivotal for advanced technologies, driving a surge in global demand. Import dependency on clean energy minerals raises concerns about supply chain vulnerabilities and geopolitical risks. Conventional REEs productionis resource-intensive and environmentally harmful, necessitating a sustainable supply approach. Phytomining (agromining) utilizes plants for eco-friendly REE extraction, contributing to the circular economy and exploiting untapped metal resources in enriched soils. Critical parameters like soil pH, Casparian strip, and REE valence influence soil and plant uptake bioavailability. Hyperaccumulator species efficiently accumulate REEs, serving as energy resources. Despite a lack of a comprehensive database, phytomining exhibits lower environmental impacts due to minimal chemical usage and CO2 absorption. This review proposes phytomining as a system for REEs extraction, remediating contaminated areas, and rehabilitating abandoned mines. The phytomining of REEs offers a promising avenue for sustainable REEs extraction but requires technological advancements to realize its full potential.

Environmental impact assessment of a novel third-generation biorefinery approach for astaxanthin and biofuel production.

A novel third-generation biorefinery approach, including two paths of Ethanol/methane production pathway (EMP) and the direct methane production pathway (DMP), for astaxanthin and ethanol and biogas production from the freshwater microalgae Haematococcus pluvialis was developed previously. To ensure its environmental sustainability, a comprehensive life cycle assessment (LCA) study was conducted based on 1-GJ energy generation from biomethane as the functional unit. Results indicate that the EMP pathway had higher environmental impacts on all categories due to more stages and chemicals/energy consumption (at least five times greater effect). Results showed that while the enzymatic hydrolysis step followed by the fermentation stage was the main contributor to all environmental categories in the EMP route, astaxanthin induction dominated all environmental categories in the DMP route. The results showed that sodium nitrate, phosphate salts, inoculum sludge, acetone, and electricity had considerable environmental impacts. Moreover, despite low enzyme usage in enzymatic hydrolysis, these proteins significantly impacted all environmental categories in this stage. The baseline analysis concluded that to produce 1 GJ energy from methane, about 88 kg and 13 kg CO2 were generated from the EMP and DMP pathways, respectively. A sensitivity analysis was also conducted to compare various ratios of chemicals, such as phosphate salts, with high contributions to enzymatic hydrolysis and astaxanthin induction stages in the EMP and DMP routes, respectively. Finally, the LCA results revealed that the DMP pathway is more environmentally friendly with the same economic value of biomethane and astaxanthin production. This LCA study updated the data related to the environmental assessment of processes to utilize H. pluvialis to produce biofuels and astaxanthin simultaneously.

Green Fabrication of Nonenzymatic Glucose Sensor Using Multi-Walled Carbon Nanotubes Decorated with Copper (II) Oxide Nanoparticles for Tear Fluid Analysis.

In this report, a green, simple, inexpensive, and effective nonenzymatic electrochemical glucose sensor was fabricated using multi-walled carbon nanotubes (MWCNT) decorated with copper (II) oxide nanoparticles (CuO NPs). Basil seed mucilage (BSM) was served as reducing, capping, and stabilizing agents in the synthesis of CuO NPs.The prepared MWCNT/CuO nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and electrochemical methods. The FTIR results indicated that the nanocomposite surface was covered by BSM. The FESEM results show that the CuO NPs with an average particle size lower than 10 nm have been well distributed on the walls of the MWCNT. The electrochemical behavior of the nanocomposite was explored by studying the electrocatalytic behavior of the screen-printed carbon electrode (SPCE) modified by the nanocomposite (SPCE-MWCNT/CuO) toward the glucose oxidation. In the optimum conditions, the electrode indicated a wide linear response from 5.0 to 620.0 µM with regression coefficients of 0.992, the sensitivity of 1050 µA mM-1 cm-2, a limit of detection (LOD) of 1.7 µM, and a reproducibility with relative standard deviation (RSD) variations from 3.5 to 11% for three measurements at each point. The obtained results also showed good selectivity to glucose against interfering species such as lactate (LA), L-ascorbic acid (AA), and urea (U) due to the use of the negatively charged BSM in the form of a coating on the nanocomposite surface. The applicability of the sensor was successfully verified by the determination of glucose concentration in artificial tears with a certain amount of glucose.

Effect of Extended Lipid Core on the Hemodynamic Parameters: A Fluid-Structure Interaction Approach.

Myocardial infarction is one of the leading causes of death in the developed countries. A majority of myocardial infarctions are caused by the rupture of coronary artery plaques. In order to achieve a better understanding of the effect of the extension of the lipid core into the artery wall on the change of flow field and its effect on plaque vulnerability, we have studied the hemodynamic parameters by utilizing a finite element method and taking into account the fluid-structure interaction (FSI). Four groups of stenosis models with different sizes of lipid core were used in the study. The fully developed pulsatile velocity profile of the right coronary artery was used as the inlet boundary condition, and the pressure pulse was applied as the outlet boundary condition. The non-Newtonian Carreau model was used to simulate the non-Newtonian behavior of blood. Results indicate that the extension of the lipid core into the artery wall influences the flow field; subsequently, creates favorable conditions for additional development of the lipid core which can lead to a higher risk of plaque rupture.

A Distance-Based Microfluidic Paper-Based Biosensor for Glucose Measurements in Tear Range.

The prevalence of diabetes has increased over the past years. Therefore, developing minimally invasive, user-friendly, and cost-effective glucose biosensors is necessary especially in low-income and developing countries. Cellulose paper-based analytical devices have attracted the attention of many researchers due to affordability, not requiring trained personnel, and complex equipment. This paper describes a microfluidic paper-based analytical device (µPAD) for detecting glucose concentration in tear range with the naked eye. The paper-based biosensor fabricated by laser CO2; and glucose oxidase/horseradish peroxidase (GOx/HRP) enzyme solution coupled with tetramethylbenzidine (TMB) were utilized as reagents. A sample volume of 10 µl was needed for the biosensor operation and the results were observable within 5 min. The color intensity-based and distance-based results were analyzed by ImageJ and Tracker to evaluate the device performance. Distance-based results showed a linear behavior in 0.1-1.2 mM with an R2 = 0.9962 and limit of detection (LOD) of 0.1 mM. The results could be perceived by the naked eye without needing additional equipment or trained personnel in a relatively short time (3-5 min).

Contribution of Physical Methods in Decellularization of Animal Tissues.

Biologic scaffolds composed of extracellular matrix (ECM) are frequently used for clinical purposes of tissue regeneration. Different methods have been developed for this purpose. All methods of decellularization including chemical and physical approaches leave some damage on the ECM; however, the effects of these methods are different which make some of these procedures more proper to maintain ECM structure than other methods. This review is aimed to introduce and compare new physical methods for the decellularization of different tissues and organs in tissue engineering. All recent reports and research that have used at least one physical method in the procedure of decellularization, were included and evaluated in this paper. The advantages and drawbacks of each method were examined and compared considering the effectiveness. This review tried to highlight the prospective potentials and benefits of applying physical methods for decellularization protocols in tissue engineering instead of the current chemical methods. These chemical methods are harsh in nature and were shown to be destructive and harmful to essential substances of ECM and scaffold structure. Therefore, using physical methods as a partial or even a whole protocol could save time, costs, and quality of the final acellular tissue in complicated decellularization procedures. Moreover, regarding the control factor that could be achieved easily with physical methods, optimization of different decellularization protocols would be quite satisfactory. Combined methods take advantage of both chemical and physical approaches.

A Comparison between Ultrasonic Bath and Direct Sonicator on Osteochondral Tissue Decellularization.

BACKGROUND: Decellularization techniques have been widely used in tissue engineering recently. However, applying these methods which are based on removing cells and maintaining the extracellular matrix (ECM) encountered some difficulties for dense tissues such as articular cartilage. Together with chemical agents, using physical methods is suggested to help decellularization of tissues. METHODS: In this study, to improve decellularization of articular cartilage, the effects of direct and indirect ultrasonic waves as a physical method in addition to sodium dodecyl sulfate (SDS) as chemical agents with 0.1% and 1% (w/v) concentrations were examined. Decellularization process was evaluated by nucleus staining with hematoxylin and eosin (H and E) and by staining glycosaminoglycans (GAG) and collagen. RESULTS: The H and E staining indicated that 1% (w/v) SDS in addition to ultrasonic bath for 5 h significantly decreased the cell nucleus residue to lacuna ratio by 66%. Scanning electron microscopy showed that using direct sonication caused formation of micropores on the surface of the sample which results in better penetration of decellularization material and better cell attachment after decellularization. Alcian Blue and Picrosirius Red staining represented GAG and collagen, respectively, which maintained in ECM structure after decellularization by ultrasonic bath and direct sonicator. CONCLUSION: Ultrasonic bath can help better penetration of the decellularization material into the cartilage. This improves the speed of the decellularization process while it has no significant defect on the structure of the tissue.

Bacterial Bioprinting on a Flexible Substrate for Fabrication of a Colorimetric Temperature Indicator by Using a Commercial Inkjet Printer.

BACKGROUND: Bacterial sensors are recommended for medical sciences, pharmaceutical industries, food industries, and environmental monitoring due to low cost, high sensitivity, and appropriate response time. There are some advantages of using bacterial spores instead of bacteria in vegetative forms as spores remain alive without any nutrient for a long time and change to vegetative form when a suitable environment is provided for them. METHODS: For biosensor fabrication, it is important to define how the bacterial spores are delivered to the substrate media. The main purpose of this paper is an investigation of transferring bacterial spores on a flexible substrate media using a commercial inkjet printer (HP Deskjet 1510). It should be noted that in the previous researches, the special printers were used to transfer bacteria on rigid films. RESULTS: These printed bacterial spores are used as a colorimetric temperature indicator. The custom-made bio-inks are prepared by bacterial spores along with a gelling agent and pH indicator. CONCLUSIONS: Finally, transformation of bacterial spores into vegetative bacteria is occurred by changing of temperature. A color change in the bio-prints is demonstrated because the bacterial transformation and growth change the environmental pH to an acidic level.

Cyclic Stretch Effects on Adipose-Derived Stem Cell Stiffness, Morphology and Smooth Muscle Cell Gene Expression.

Recent investigations consider adipose-derived stem cells (ASCs) as a promising source of stem cells for clinical therapies. To obtain functional cells with enhanced cytoskeleton and aligned structure, mechanical stimuli are utilized during differentiation of stem cells to the target cells. Since function of muscle cells is associated with cytoskeleton, enhanced structure is especially essential for these cells when employed in tissue engineering. In this study by utilizing a custom-made device, effects of uniaxial tension (1Hz, 10% stretch) on cytoskeleton, cell alignment, cell elastic properties, and expression of smooth muscle cell (SMC) genes in ASCs are investigated. Due to proper availability of ASCs, results can be employed in cardiovascular engineering when production of functional SMCs in arterial reconstruction is required. Results demonstrated that cells were oriented after 24 hours of cyclic stretch with aligned pseudo-podia. Staining of actin filaments confirmed enhanced polymerization and alignment of stress fibers. Such phenomenon resulted in stiffening of cell body which was quantified by atomic force microscopy (AFM). Expression of SM α-actin and SM22 α-actin as SMC associated genes were increased after cyclic stretch while GAPDH was considered as internal control gene. Finally, it was concluded that application of cyclic stretch on ASCs assists differentiation to SMC and enhances functionality of cells.

Effects of uniaxial cyclic stretch loading on morphology of adipose derived stem cells.

Adipose derived stem cells (ADSC) are good candidates for the replacement of bone marrow derived mesenchymal stem cells due to their abundance, multipotency property, and easier accessibility. In order to explore the behavior of these cells in response to mechanical stimulation, in this study we have investigated the effects of uniaxial dynamic mechanical loading on ADSC's morphology. Stem cells derived from the fat tissue of human and after an overnight culture were seeded on a silicone rubber strips. Afterwards, cells were subjected to a uniaxial dynamic loading in three different groups. Cell images were evaluated considering different morphological parameters. Fractal dimension decreased significantly after loading while in control groups there were a significant increase (p<0.05), approving that cyclic strain would lead to more aligned and organized cells. Cell orientation also increased significantly (p<0.05). Moreover cells' orientation angle, 24 hour after loading does not change compared to the observations immediately after loading, which attests to the practicality of the cyclic strain in functional tissue engineering. Cell width decreased and cell length increased which led to a significant increase in cell shape index (p<0.05). Results confirmed that uniaxial dynamic loading affects cell morphological parameters comparing their values before and after loading. In addition, the number of cycles are also an important factor since different number of cycles lead to different amounts of certain morphological parameters. Conclusively, cyclic strain can be a practical method in the field of functional tissue engineering.

Effects of hypergravity on adipose-derived stem cell morphology, mechanical property and proliferation.

Alteration in specific inertial conditions can lead to changes in morphology, proliferation, mechanical properties and cytoskeleton of cells. In this report, the effects of hypergravity on morphology of Adipose-Derived Stem Cells (ADSCs) are indicated. ADSCs were repeatedly exposed to discontinuous hypergravity conditions of 10 g, 20 g, 40 g and 60 g by utilizing centrifuge (three times of 20 min exposure, with an interval of 40 min at 1 g). Cell morphology in terms of length, width and cell elongation index and cytoskeleton of actin filaments and microtubules were analyzed by image processing. Consistent changes observed in cell elongation index as morphological change. Moreover, cell proliferation was assessed and mechanical properties of cells in case of elastic modulus of cells were evaluated by Atomic Force Microscopy. Increase in proliferation and decrease in elastic modulus of cells are further results of this study. Staining ADSC was done to show changes in cytoskeleton of the cells associated to hypergravity condition specifically in microfilament and microtubule components. After exposing to hypergravity, significant changes were observed in microfilaments and microtubule density as components of cytoskeleton. It was concluded that there could be a relationship between changes in morphology and MFs as the main component of the cells.

Biological evaluation of polyvinyl alcohol hydrogel crosslinked by polyurethane chain for cartilage tissue engineering in rabbit model.

Polyvinyl alcohol (PVA) hydrogel chains were crosslinked by urethane pre-polymer (PPU) in order to fabricate a new substitute for cartilage lesions. The microscopy images showed that the cultured chondrocytes had spherical morphology on PVA-PPU sample after 4 weeks of isolation in vitro. The alcian blue and safranin O staining proved the presence of proteoglycan on the surface of PVA-PPU sample secreted by cultured chondrocytes. This was confirmed by the detection of sulfate ions in the wavelength dispersive X-ray (WDX) analysis. In addition, the expression of collagen type II and aggrecan were observed in chondrocytes cultured on PVA-PPU by RT-PCR. Moreover, the implantation of the PVA-PPU sample with autologous cultured chondrocytes revealed the formation of neocartilage tissue in a rabbit model during 12 weeks follow up. In conclusion, the results verified that isolated chondrocytes cultured on PVA-PPU retain their original phenotype and this composition can be considered as promising substrate for cartilage tissue engineering.

Effect of uniaxial stretch on morphology and cytoskeleton of human mesenchymal stem cells: static vs. dynamic loading.

Abstract Human mesenchymal stem cells (hMSCs) are capable of self-renewal and differentiation into various cell lineages. Mechanical stimuli have been shown to regulate function of stem cells through alteration in morphology and structure. The aim of this study was to evaluate and compare effects of uniaxial static stretch and combined static-dynamic stretch on the orientation, regulation and cytoskeletal structure of hMSCs. Mean values of topological were calculated before and after loadings. Moreover, fractal dimension (FD) was employed to quantify alterations in shape complexity of the cells. Internal cytoskeletal structure of cells was observed by actin filament staining. Results demonstrated a statistically significant change in cell topology and FD due to 10% static-dynamic stretch after 24 h. Static stretch was not as influential as dynamic loading. Whereas for combined static-dynamic stretch systemic alignment of cells was detected, in the static test group local alignment of actin fibers was observed, although the entire cell network was not totally aligned in a specific direction. It was concluded that dynamic stretch leads to cytoskeletal alignment and repolarization of hMSCs, whereas static stretch does not. Under static stretch hMSCs proliferated more than under dynamic stretch. Results can be applied in tissue engineering when functionalization of stem cells is required.

Effects of electric and magnetic loadings on bone surface remodeling: a model modification and simulation.

This paper presents a new modification to the previous model of bone surface remodeling under electric and magnetic loadings. For this study, the thermo-electro-magneto-elastic model of bone surface remodeling is used. This model is modified by considering an important phenomenon occurring in living bone through its adaptation to external loadings called desensitization. In fact, bone cells lose their responsiveness and sensitivity to long-term external loadings, i.e., they become desensitized. Therefore, bone cells need a recovery period, during which they become resensitized. In this work, this phenomenon is considered in the original model. The effects of various electric and magnetic loading conditions, including various frequencies, waveforms and pulse duty cycles, are explored on the modified model and compared to the original model. The modified model is also searched for the optimal frequency and duty cycle, to obtain the best bone growth response under electromagnetic fields. The results of this paper show that the modified model is consistent with experimental observations. In addition, it is indicated that this modified model in contrast to the original model, is sensitive to frequency. It is shown that the optimal frequency of loading for the modified model is 1 Hertz (Hz), and the pulse duty cycles up to 50% are sufficient for bone remodeling to reach its maximum value.