An organic proton cage that is ultra-resistant to hydroxide-promoted degradation.

Alkaline polymer membrane electrochemical energy conversion devices offer the prospect of using non-platinum group catalysts. However, their cationic functionalities are currently not sufficiently stable for vapor-phase applications, such as fuel cells. Herein, we report 1,6-diazabicyclo[4.4.4]tetradecan-1,6-ium (in-DBD), a cationic proton cage, that is orders of magnitude more resistant to hydroxide-promoted degradation than state-of-the-art organic cations under ultra-dry conditions and elevated temperature, and the first organic cation-hydroxide to persist at critically low hydration levels ( < 10% RH at 80 °C). This high stability against hydroxide-promoted degradation is due to the unique combination of endohedral protection and intra-bridgehead hydrogen bonding that prevents the removal of the inter-cavity proton and lowers the susceptibility to Hofmann elimination. We anticipate this discovery will facilitate a step-change in the advancement of materials and electrochemical devices utilizing anion-exchange membranes based on in-DBD that will enable stable operation under extreme alkaline conditions.

Not Just Surface Energy: The Role of Bis(pentafluorophenoxy) Silicon Phthalocyanine Axial Functionalization and Molecular Orientation on Organic Thin-Film Transistor Performance.

Understanding the effect of surface chemistry on the dielectric-semiconductor interface, thin-film morphology, and molecular alignment enables the optimization of organic thin-film transistors (OTFTs). We explored the properties of thin films of bis(pentafluorophenoxy) silicon phthalocyanine (F10-SiPc) evaporated onto silicon dioxide (SiO2) surfaces modified by self-assembled monolayers (SAMs) of varying surface energies and by weak epitaxy growth (WEG). The total surface energy (γtot), dispersive component of the total surface energy (γd), and polar component of the total surface energy (γp) were calculated using the Owens-Wendt method and related to electron field-effect mobility of devices (µe), and it was determined that minimizing γp and matching γtot yielded films with the largest relative domain sizes and highest resulting µe. Subsequent analyses were completed using atomic force microscopy (AFM) and grazing-incidence wide-angle X-ray scattering (GIWAXS) to relate surface chemistry to thin-film morphology and molecular order at the surface and semiconductor-dielectric interface, respectively. Films evaporated on n-octyltrichlorosilane (OTS) yielded devices with the highest average µe of 7.2 × 10-2 cm2·V-1·s-1 that we attributed to it having both the largest domain length, which were extracted from power spectral density function (PSDF) analysis, and a subset of molecules with a pseudo edge-on orientation relative to the substrate. Films of F10-SiPc with the mean molecular orientation of the π-stacking direction being more edge-on relative to the substrate also generally resulted in OTFTs with a lower average VT. Unlike conventional MPcs, F10-SiPc films fabricated by WEG experienced no macrocycle in an edge-on configuration. These results demonstrate the critical role of the F10-SiPc axial groups on WEG, molecular orientation, and film morphology as a function of surface chemistry and the choice of SAMs.

Poly(ionic liquid) Gating Materials for High-Performance Organic Thin-Film Transistors: The Role of Block Copolymer Self-Assembly at the Semiconductor Interface.

The widespread realization of wearable electronics requires printable active materials capable of operating at low voltages. Polymerized ionic liquid (PIL) block copolymers exhibit a thickness-independent double-layer capacitance that makes them a promising gating medium for the development of organic thin-film transistors (OTFTs) with low operating voltages and high switching speed. PIL block copolymer structure and self-assembly can influence ion conductivity and the resulting OTFT performance. In an OTFT, self-assembly of the PIL gate on the semiconducting polymer may differ from bulk self-assembly, which would directly influence electrical double-layer formation. To this end, we used poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)) as a model semiconductor for our OTFTs, on which our PILs exhibited self-assembly. In this study, we explore this critical interface by grazing-incidence small-angle X-ray scattering (GISAXS) and atomic force microscopy (AFM) of P(NDI2OD-T2) and a series of poly(styrene)-b-poly(1-(4-vinylbenzyl)-3-butylimidazolium-random-poly(ethylene glycol) methyl ether methacrylate) (poly(S)-b-poly(VBBI+[X]-r-PEGMA)) block copolymers with varying PEGMA/VBBI+ ratios and three different mobile anions (where X = TFSI-, PF6-, or BF4-). We investigate the thin-film self-assembly of block copolymers as a function of device performance. Overall, a mixed orientation at the interface leads to improved device performance, while predominantly hexagonal packing leads to nonfunctional devices, regardless of the anion present. These PIL gated OTFTs were characterized with a threshold voltage below 1 V, making understanding of their structure-property relationships crucial to enabling the further development of high-performance gating materials.

Regioisomerically Pure 1,7-Dicyanoperylene Diimide Dimer for Charge Extraction from Donors with High Electron Affinities.

Perylene diimide (PDI) has attracted widespread interest as an inexpensive electron acceptor for photovoltaic applications; however, overcrystallization in the bulk heterojunction typically leads to low device performance. Recent work has addressed this issue by forming bay-linked PDI dimers and oligomers, where the steric bulk of adjacent PDI units forces the molecule to adopt a nonplanar structure. This disrupts the molecular packing and limits domain sizes in the bulk heterojunction. Unfortunately, the introduction of electron-donating/-withdrawing groups in the bay region is also the best way to fine-tune the frontier molecular orbitals (FMOs) of PDI, which is highly desirable from a device optimization standpoint. This competition for the bay region has made it difficult for PDI to keep pace with other non-fullerene acceptors. Here, we report the synthesis of regioisomerically pure 1,7-dicyanoperylene diimide and its dimerization through an imide linkage. We show that this is an effective strategy to tune the energies of the FMOs while simultaneously suppressing overcrystallization in the bulk heterojunction. The resulting acceptor has a low LUMO energy of -4.2 eV and is capable of accepting photogenerated electrons from donor polymers with high electron affinities, even when conventional acceptors such as PDI, PC71BM, and ITIC cannot.

Watching Paint Dry: Operando Solvent Vapor Annealing of Organic Solar Cells.

The commercialization of organic solar cell (OSC) technology will require highly reproducible techniques for controlling the morphology of bulk heterojunction blends. Variable-pressure solvent vapor annealing (VP-SVA) is one method for postprocessing organic solar cells with high precision; it can prevent the overannealing of cells that plagues conventional SVA processes. To gain insight into the dynamics of the VP-SVA process, we carried out operando measurements on OSCs with correlated in situ grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements. We show that the partial pressure of solvent vapor controls the length scale of film reordering, with optimal restructuring taking place below the saturation vapor pressure of the solvent. The experiments reveal how the film crystallinity, domain sizes, and percolation pathways evolve over the course of the VP-SVA process and how subtle differences in these morphological parameters differentiate good OSCs from champion cells.