Novel sodium alkyl-1,3-disulfates, anionic biosurfactants produced from microbial polyesters.

A sodium alkyl disulfate mixture (SADM) synthesised from microbially produced 3-hydroxy fatty acids methyl esters (HFAMEs), showed 13-fold surface tension decrease when compared with the reference surfactant sodium dodecyl sulfate (SDS). Polyhydroxyalkanoates, accumulated by bacteria intracellularly when supplied with a mixture of fatty acids derived from hydrolysed rapeseed oil, were isolated, depolymerised and methylated to produce HFAMEs in very high yield (90%). A sequential chemical reduction and sulfation of the HFAMEs produced the sodium alkyl disulfates in high yields (>65%). SADM performs also 1.3-times better than dodecyl (1,3) disulfate, in surface tension tests. SADM shows also the formation of a specific critical micelle concentration (CMC) at a concentration 21-fold lower than SDS. The wettability of the SADM mixture is similar to SDS but the foaming volume of SADM is 1.5-fold higher. The foam is also more stable with its volume decreasing 3 times slower over time compared to SDS at their respective CMC values. Established sulfation technologies in chemical manufacturing could use the 3-hydroxy fatty acids methyl esters moiety (3-HFAME) given its origin from rapeseed oil and the extra OH residue on 3-position in the molecule, which affords the opportunity to produce disulfate surfactants with a proven superior performance to monosulphated surfactants. Thus, not only addressing environmental issues by avoiding threats of deforestation and monocultivation associated with palm oil use but also achieve a higher performance with lower use of surfactants.

Rhamnolipid inspired lipopeptides effective in preventing adhesion and biofilm formation of Candida albicans.

Rhamnolipids are biodegradable low toxic biosurfactants which exert antimicrobial and anti-biofilm properties. They have attracted much attention recently due to potential applications in areas of bioremediation, therapeutics, cosmetics and agriculture, however, the full potential of these versatile molecules is yet to be explored. Based on the facts that many naturally occurring lipopeptides are potent antimicrobials, our study aimed to explore the potential of replacing rhamnose in rhamnolipids with amino acids thus creating lipopeptides that would mimic or enhance properties of the parent molecule. This would allow not only for more economical and greener production but also, due to the availability of structurally different amino acids, facile manipulation of physico-chemical and biological properties. Our synthetic efforts produced a library of 43 lipopeptides revealing biologically more potent molecules. The structural changes significantly increased, in particular, anti-biofilm properties against Candida albicans, although surface activity of the parent molecule was almost completely abolished. Our findings show that the most active compounds are leucine derivatives of 3-hydroxy acids containing benzylic ester functionality. The SAR study demonstrated a further increase in activity with aliphatic chain elongation. The most promising lipopeptides 15, 23 and 36 at 12.5 µg/mL concentration allowed only 14.3%, 5.1% and 11.2% of biofilm formation, respectively after 24 h. These compounds inhibit biofilm formation by preventing adhesion of C. albicans to abiotic and biotic surfaces.

Biocatalytic potential of Streptomyces spp. isolates from rhizosphere of plants and mycorrhizosphere of fungi.

Biocatalytic potential of Streptomyces strains isolated from the rhizosphere of plants and from mycorrhizosphere of fungi has been investigated. A total of 118 Streptomyces isolates were selected and functionally screened for 10 different biotechnologically important enzymatic activities: hydrolase (cellulase, cutinase, gelatinase, lipase, protease, polyhydroxyalkanoate (PHA) depolymerase), phenol oxidase and peroxidase (laccase, tyrosinase, and lignin peroxidase), and aminotransferase. Out of 118 tested Streptomyces spp., 90% showed at least one enzymatic activity. The most abundant were enzymes involved in the biomass degradation, as the production of cutinase, cellulase, and lignin peroxidase were detected in 31%, 40%, and 48% of the isolates, respectively. The improved specific activities of lipase (isolates BV315 and BV100) and tyrosinase (isolates BV87 and BV88) were shown in comparison with the industrially relevant activities of Pseudomonas strains. Plant rhizosphere soils were more prolific source of Streptomyces strains with biocatalytic potential in comparison with mycorrhizosphere soils. Overall, 284 enzyme activities among 118 Streptomyces isolates have been detected. This is the first comprehensive screening of Streptomyces isolates from rhizosphere and mycorrhizosphere soils for novel biocatalysts, showing that specific environmental habitats, such as rhizosphere soils, are "treasure troves" of Streptomyces with biocatalytic potential.

Polyhydroxyalkanoate-based 3-hydroxyoctanoic acid and its derivatives as a platform of bioactive compounds.

A library of 18 different compounds was synthesized starting from (R)-3-hydroxyoctanoic acid which is derived from the bacterial polymer polyhydroxyalkanoate (PHA). Ten derivatives, including halo and unsaturated methyl and benzyl esters, were synthesized and characterized for the first time. Given that (R)-3-hydroxyalkanoic acids are known to have biological activity, the new compounds were evaluated for antimicrobial activity and in vitro antiproliferative effect with mammalian cell lines. The presence of the carboxylic group was essential for the antimicrobial activity, with minimal inhibitory concentrations against a panel of bacteria (Gram-positive and Gram-negative) and fungi (Candida albicans and Microsporum gypseum) in the range 2.8-7.0 mM and 0.1-6.3 mM, respectively. 3-Halogenated octanoic acids exhibited the ability to inhibit C. albicans hyphae formation. In addition, (R)-3-hydroxyoctanoic and (E)-oct-2-enoic acids inhibited quorum sensing-regulated pyocyanin production in the opportunistic pathogen Pseudomonas aeruginosa PAO1. Generally, derivatives did not inhibit mammalian cell proliferation even at 3-mM concentrations, while only (E)-oct-2-enoic and 3-oxooctanoic acid had IC50 values of 1.7 and 1.6 mM with the human lung fibroblast cell line.

The chain length of biologically produced (R)-3-hydroxyalkanoic acid affects biological activity and structure of anti-cancer peptides.

Conjugation of DP18L peptide with (R)-3-hydroxydecanoic acid, derived from the biopolymer polyhydroxyalkanoate, enhances its anti-cancer activity (O'Connor et al., 2013. Biomaterials 34, 2710-2718). However, it is unknown if other (R)-3-hydroxyalkanoic acids (R3HAs) can enhance peptide activity, if chain length affects enhancement, and what effect R3HAs have on peptide structure. Here we show that the degree of enhancement of peptide (DP18L) anti-cancer activity by R3HAs is carbon chain length dependent. In all but one example the R3HA conjugated peptides were more active against cancer cells than the unconjugated peptides. However, R3HAs with 9 and 10 carbons were most effective at improving DP18L activity. DP18L peptide variant DP17L, missing a hydrophobic amino acid (leucine residue 4) exhibited lower efficacy against MiaPaCa cells. Circular dichroism analysis showed DP17L had a lower alpha helix content and the conjugation of any R3HA ((R)-3-hydroxyhexanoic acid to (R)-3-hydroxydodecanoic acid) to DP17L returned the helix content back to levels of DP18L. However (R)-3-hydroxyhexanoic did not enhance the anti-cancer activity of DP17L and at least 7 carbons were needed in the R3HA to enhance activity of D17L. DP17L needs a longer chain R3HA to achieve the same activity as DP18L conjugated to an R3HA. As a first step to assess the synthetic potential of polyhydroxyalkanoate derived R3HAs, (R)-3-hydroxydecanoic acid was synthetically converted to (±)3-chlorodecanoic acid, which when conjugated to DP18L improved its antiproliferative activity against MiaPaCa cells.

Chemoselective biocatalytic reduction of conjugated nitroalkenes: new application for an Escherichia coli BL21(DE3) expression strain.

Chemoselective reduction of activated carbon-carbon double bond in conjugated nitroalkenes was achieved using Escherichia coli BL21(DE3) whole cells. Nine different substrates have been used furnishing the reduced products in moderate to good yields. 1-Nitro-4-phenyl-1,3-butadiene and (2-nitro-1-propenyl)benzene were successfully biotransformed with corresponding product yields of 54% and 45% respectively. Using this simple and environmentally friendly system 2-(2-nitropropyl)pyridine and 2-(2-nitropropyl)naphthalene were synthesized and characterized for the first time. High substrate conversion efficiency was coupled with low enantioselectivity, however 29% enantiomeric excess was detected in the case of 2-(2-nitropropyl)pyridine. It was shown that electronic properties of the aromatic ring, which affected polarity of the double bond, were not highly influential factors in the reduction process, but the presence of the nitro functionality was essential for the reaction to proceed. 1-Phenyl-4-nitro-1,3-butadiene could not be biotransformed by whole cells of Pseudomonas putida KT2440 or Bacillus subtilis 168 while it was successfully reduced by E. coli DH5α but with lower efficiency in comparison to E. coli BL21(DE3). Knockout mutant affected in nemA gene coding for N-ethylmaleimide reductase (BL21ΔnemA) could still catalyze bioreductions suggesting multiple active reductases within E. coli BL21(DE3) biocatalyst. The described biocatalytic reduction of substituted nitroalkenes provides an efficient route for the preparation of the corresponding nitroalkanes and introduces the new application of the strain traditionally utilized for recombinant protein expression.

Highly efficient Michael-type addition of acetaldehyde to ß-nitrostyrenes by whole resting cells of Escherichia coli expressing 4-oxalocrotonate tautomerase.

A novel whole cell system based on recombinantly expressed 4-oxalocrotonate tautomerase (4-OT) was developed and shown to be an effective biocatalyst for the asymmetric Michael addition of acetaldehyde to ß-nitrostyrenes. Optimal ratio of substrates (2mM ß-nitrostyrenes and 20mM acetaldehyde) and biocatalyst of 5 g of cell dry weight of biocatalyst per liter was determined. Through further bioprocess improvement by sequential addition of substrate 10mM nitrostyrene biotransformation was achieved within 150 min. Excellent enantioselectivity (>99% ee) and product yields of up to 60% were obtained with ß-nitrostyrene substrate. The biotransformation product, 4-nitro-3-phenyl-butanal, was isolated from aqueous media and further transformed into the corresponding amino alcohol. The biocatalyst exhibited lower reaction rates with p-Cl-, o-Cl- and p-F-ß-nitrostyrenes with product yields of 38%, 51%, 31% and ee values of 84%, 88% and 94% respectively. The importance of the terminal proline of 4-OT was confirmed by two proline enriched variants and homology modeling.