Solvent Polarity Dependent Ultrafast Relaxation Kinetics of ADS800AT Dye.

This work investigated the photoexcitation and relaxation kinetics of the ADS800AT dye dissolved in different solvents using transient absorption spectroscopy (TAS) with a white-light continuum probe. The dye was dissolved in various solvents, including dichloromethane (DCM), 1,2-dichlorobenzene (DCB), ethanol, and methanol, to study their impact on the dye's characteristics. The linear absorption peak varied from 835 to 809 nm, depending on the polarity of the solvent, and the pump wavelength for TAS was chosen accordingly. We observed ground-state bleaching and excited-state absorption after exciting the dye with the pump pulse. Global analysis was performed using Glotaran software to fit exponential decay curve models, allowing us to determine the relaxation time of the excited molecule. The relaxation time varied from 198 ps to 508 ps across the different solvents, decreasing as the polarity of the solvent increased. Additionally, we could experimentally correlate the dye molecule's nonlinear properties with the solvent's polarity.

A Comparative Study of the ProSeal Laryngeal Mask Airway Versus Endotracheal Tube in Neonates With Anorectal Malformations.

BACKGROUND: Laryngeal mask airways (LMAs) are widely used in paediatric anaesthesia. However, LMA use in neonatal age groups (younger than seven days) is limited because many anaesthesiologists prefer to use endotracheal tube in neonates. In this study, we compared the ProSeal LMA and endotracheal tube by measuring their performance, including ease of insertion via number of attempts for placement of device, total effective time for intubation and extubation, hemodynamic responses and perioperative complications. METHODS: In this prospective randomized study, 70 patients (neonates) weighing >2.5 kg, with American Society of Anaesthesiologists (ASA) classification grade 4 requiring emergency surgery for anorectal malformation were enrolled and divided into two groups. After induction, patients' airways were secured with either ProSeal LMA size 1 (Group I) or endotracheal tube (Group II). Anaesthesia was maintained on oxygen and sevoflurane with muscle relaxant atracurium. RESULTS: Demographic and surgical data were similar between the two groups. The ProSeal LMA insertion time was shorter than endotracheal intubation. Hemodynamic variations were less in the ProSeal LMA group as compared to the endotracheal tube group. The total time for removal of airway devices from the end of surgery for the ProSeal group was lower than that for the endotracheal intubation group. Postoperative complications were less in the ProSeal group as compared to the endotracheal group. CONCLUSIONS: The ProSeal LMA can be a better alternative to the endotracheal tube in neonates due to the ease of insertion, lesser changes in hemodynamic parameters and minimal postoperative complications.

Broadband absorption of nanostructured stainless steel surface fabricated by nanosecond laser irradiation.

Highly efficient broadband absorbing surfaces covering the UV, visible and near-IR regions are of great importance for low-light imaging devices, optical devices and optoelectronic devices. In this work, we demonstrate the fabrication of remarkably efficient absorbing surfaces due to the formation of nanoflower-like cavity structures on a stainless steel (SS304) surface, along with micropatterning in a hierarchical fashion. The fabrication process is carried out using noncontact, programmable, single-step laser irradiation by an inexpensive and robust 532 nm nanosecond laser. The measured specular antireflection properties over a wide spectral region (250-1800 nm) are extremely low, less than 0.5%, over a large range of incident angles and for both orthogonal polarizations. These special hierarchical structures with nanorods, nanoparticles, and nanocavities, completely trap the photon incident on these surfaces due to multiple reflections. These surface structures evolve with time to give better nanostructured features with higher oxygen content on the surfaces, revealed by FESEM elemental analysis, which increases the ability to trap photons. We believe these antireflection surfaces, with high efficiencies and long-term stability, will play a vital role in many modern technological applications.

Knowledge about tuberculosis among pulmonary tuberculosis patients: A cross-sectional study from Uttarakhand.

BACKGROUND: Tuberculosis (TB) is a major health problem in India. The Revised National TB Control Programme (RNTCP) is working towards elimination of TB in the country by 2025. As the RNTCP relies on passive case finding, it is crucial for the success of the RNTCP that TB patients have knowledge about their disease. The present study aimed to assess the knowledge of TB among pulmonary TB (PTB) patients. MATERIALS AND METHODS: A cross-sectional questionnaire based study using a pretested semi-structured questionnaire among new and previously treated PTB patients at Haldwani Block of Nainital District of Uttarakhand State of North India. Data was analyzed using the software Epi Info version 7.2.0.1. RESULTS: A total of 111 PTB patients with mean age of 36.3 years were included for final analysis. Only 43.2% PTB patients were aware that TB is caused by germs, 48.6% knew that it is not a hereditary disease. Only 13.5% PTB patients knew that vaccine is available and majority (68.5%) were aware of covering mouth and nose while coughing and sneezing for prevention of the disease. Overall, only two-third (65%) patients had good knowledge about TB. CONCLUSIONS: About one-third of PTB patients had poor knowledge about TB. This highlights that to achieve elimination of TB, RNTCP needs to change the present information, education, and communication (IEC) system which is based on a bio-medical framework, and to design a culturally sensitive health education system. Alternatively, the Programme needs to shift from passive case finding to active case finding strategy.

Laser surface modification of 316L stainless steel.

Medical grade 316L stainless steel was laser surface melted (LSM) using continuous wave Nd-YAG laser in argon atmosphere at 1 and 5 mm/s. The treated surfaces were characterized using electron backscatter diffraction to study the influence of top surface crystallographic orientation and type of grain boundaries on corrosion resistance, wettability, and biocompatibility. The laser scan velocity was found to have a marginal influence on the surface roughness and the type of grain boundaries. However, the crystal orientation density was found to be relatively high in 1 mm/s samples. The LSM samples showed a higher concentration of {101} and {123} planes parallel to the sample surface as well as a higher fraction of low-angle grain boundaries. The LSM samples were found to exhibit better surface wettability and enhanced the viability and proliferation of human fetal osteoblast cells in vitro when compared to the untreated samples. Further, the corrosion protection efficiency of 316L stainless steel was improved up to 70% by LSM in as-processed condition. The increased concentration of {101} and {123} planes on surfaces of LSM samples increases their surface energy, which is believed to be responsible for the improved in vitro cell proliferation. Further, the increased lattice spacing of these planes and high concentration of low-energy grain boundaries in LSM samples would have contributed to the better in vitro corrosion resistance than untreated 316L stainless steel. Our results indicate that LSM can be a potential treatment option for 316L stainless steel-based biomedical devices to improve biocompatibility and corrosion resistance. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 569-577, 2018.

A genetically encoded fluorescent tRNA is active in live-cell protein synthesis.

Transfer RNAs (tRNAs) perform essential tasks for all living cells. They are major components of the ribosomal machinery for protein synthesis and they also serve in non-ribosomal pathways for regulation and signaling metabolism. We describe the development of a genetically encoded fluorescent tRNA fusion with the potential for imaging in live Escherichia coli cells. This tRNA fusion carries a Spinach aptamer that becomes fluorescent upon binding of a cell-permeable and non-toxic fluorophore. We show that, despite having a structural framework significantly larger than any natural tRNA species, this fusion is a viable probe for monitoring tRNA stability in a cellular quality control mechanism that degrades structurally damaged tRNA. Importantly, this fusion is active in E. coli live-cell protein synthesis allowing peptidyl transfer at a rate sufficient to support cell growth, indicating that it is accommodated by translating ribosomes. Imaging analysis shows that this fusion and ribosomes are both excluded from the nucleoid, indicating that the fusion and ribosomes are in the cytosol together possibly engaged in protein synthesis. This fusion methodology has the potential for developing new tools for live-cell imaging of tRNA with the unique advantage of both stoichiometric labeling and broader application to all cells amenable to genetic engineering.

Surgical Resection of Insular Gliomas and Roles of Functional Magnetic Resonance Imaging and Diffusion Tensor Imaging Tractography-Single Surgeon Experience.

OBJECTIVE: In gliomas located in proximity to eloquent areas, near total resection and subsequent radiotherapy is often preferred to avoid postoperative neurologic complications. Preoperative functional magnetic resonance imaging (fMRI) and diffusion tensor imaging (DTI) tractography provide new insights into surgeries of insular gliomas. In this study we report our experience of surgical management of insular gliomas and the role of fMRI and DTI tractography in planning the resection. METHODS: We retrospectively compared the clinical and outcome variables of 61 patients who underwent surgical resection of insular gliomas. The study population was divided into 2 groups according to the use of fMRI and DTI tractography in planning the resection. RESULTS: The average age of the study population was 44.1 ± 12.6 years with 21 (34.4%) of the patients women. Nearly two thirds of them (40, or 65.6%) had World Health Organization grade II tumors, and 16 patients (26.2%) had grade IV tumors. The most common tumor was glioblastoma, observed in 16 patients (26.2%). In 10 (16.4%) patients, fMRI and DTI tractography were used. The overall mortality in the study population was 15 (24.6%). None of the patients where fMRI and DTI were used for planning the surgery died (29.4% vs. 0.0%; P = 0.05), and all of them had normal functioning (70.5% vs. 100.0%; P = 0.05) at 3 months' follow-up. CONCLUSION: Surgical resection of insular gliomas remains a challenge to the neurosurgeon and demands good knowledge of anatomic landmarks. Use of fMRI and DTI tractography may help achieve a good outcome.

Optimized process parameters for fabricating metal particles reinforced 5083 Al composite by friction stir processing.

Metal matrix composites (MMCs) exhibit improved strength but suffer from low ductility. Metal particles reinforcement can be an alternative to retain the ductility in MMCs (Bauri and Yadav, 2010; Thakur and Gupta, 2007) [1,2]. However, processing such composites by conventional routes is difficult. The data presented here relates to friction stir processing (FSP) that was used to process metal particles reinforced aluminum matrix composites. The data is the processing parameters, rotation and traverse speeds, which were optimized to incorporate Ni particles. A wide range of parameters covering tool rotation speeds from 1000 rpm to 1800 rpm and a range of traverse speeds from 6 mm/min to 24 mm/min were explored in order to get a defect free stir zone and uniform distribution of particles. The right combination of rotation and traverse speed was found from these experiments. Both as-received coarse particles (70 µm) and ball-milled finer particles (10 µm) were incorporated in the Al matrix using the optimized parameters.

Aggressive giant cell tumour of talus with pulmonary metastasis-a rare presentation.

Giant cell tumour (GCT) is a primary benign neoplasm of bone. It is classically described as a locally invasive tumour that occurs close to the joint of a mature bone. It accounts for 5% of all skeletal tumours. It usually originates from long bones. Giant Cell Tumour of the small bones of the hand and foot are relatively uncommon. Giant Cell Tumour of talus is a rare occurrence. We report a rare presentation of giant cell tumour of the talus in a 62-year-old farmer treated by talectomy and tibiocalcaneal fusion, who later presented with features suggestive of recurrence and secondaries in chest within six months following surgical resection of the primary. Below knee amputation was performed to manage the recurrence. At two years follow-up the patient showed no further progression of pulmonary metastasis or local recurrence.

Osteochondroma of the ventral scapula causing scapular static winging and secondary rib erosion.

An osteochondroma is a benign tumour of bone, which is located mainly in the metaphysis of long bones. It does not commonly occur in the scapula. On the ventral surface of the scapula, it can produce various manifestations due to mass effect. We are reporting a rare presentation of an osteochondroma at superomedial angle of ventral aspect of the scapula in a 31-year-old female. She initially presented with a painful shoulder and radiating pain in the arm. The scapular mass produced pseudo winging of the scapula and erosion of the ribs on the same side. The patient was successfully managed by open excision, using a parascapular approach. The patient had no evidence of recurrence at one year's follow-up and is currently able to carry on her day to day activities without any discomfort.

Laser surface modification of 316 L stainless steel with bioactive hydroxyapatite.

Laser-engineered net shaping (LENS™), a commercial additive manufacturing process, was used to modify the surfaces of 316 L stainless steel with bioactive hydroxyapatite (HAP). The modified surfaces were characterized in terms of their microstructure, hardness and apatite forming ability. The results showed that with increase in laser energy input from 32 J/mm(2) to 59 J/mm(2) the thickness of the modified surface increased from 222±12 µm to 355±6 µm, while the average surface hardness decreased marginally from 403±18 HV0.3 to 372±8 HV0.3. Microstructural studies showed that the modified surface consisted of austenite dendrites with HAP and some reaction products primarily occurring in the inter-dendritic regions. Finally, the surface-modified 316 L samples immersed in simulated body fluids showed significantly higher apatite precipitation compared to unmodified 316 L samples.

Identification and expression of stressosomal proteins in Mycobacterium marinum under various growth and stress conditions.

Like other bacteria, Mycobacterium spp. have developed different strategies in response to environmental changes such as nutrient limitations and other different stress situations. We have identified candidate genes (rsb genes) from Mycobacterium marinum involved in the regulation of the activity of the alternative sigma factor, σ(F) . This is a homolog of the master regulator of general stress response, σ(B) , and the sporulation-specific sigma factor, σ(F) , in Bacillus subtilis. The organization of these genes in M. marinum and B. subtilis is similar. Transcriptome and qRT-PCR data show that these genes are indeed expressed in M. marinum and that the levels of expression vary with growth phase and exposure to stress. In particular, cold stress caused a significant rise in the expression of all identified rsb and sigF genes. We discuss these data in relation to what is currently known for other Mycobacterium spp.

DNA binding activity of Helicobacter pylori DnaB helicase: the role of the N-terminal domain in modulating DNA binding activities.

Replicative helicases are major motor proteins essential for chromosomal DNA replication in prokaryotes. Usually hexameric in solution, their DNA binding property must have different roles at stages ranging from the loading onto a branched structure at initiation from the origin to the highly processive translocation during elongation. Here, we have analysed the DNA binding activity of Helicobacter pylori (Hp) replicative helicase, DnaB. The results indicate that while the C-terminal region is important for its DNA binding activity, the N-terminus appears to dampen the protein's affinity for DNA. The masking activity of the N-terminus does not require ATP or hexamerization of HpDnaB and can be overcome by deleting the N-terminus. It can also be neutralized by engaging the N-terminus in an interaction with a partner like the C-terminus of DnaG primase. The inhibitory effect of the N-terminus on DNA binding activity is consistent with the 3D homology model of HpDnaB. Electron microscopy of the HpDnaB-ssDNA complex showed that HpDnaB preferentially bound at the ends of linear ssDNA and translocated along the DNA in the presence of ATP. These results provide an insight into the stimulatory and inhibitory effects of different regions of HpDnaB on DNA binding activities that may be central to the loading and translocation functions of DnaB helicases.

Infections and immunodeficiency in Down syndrome.

Down syndrome (DS) is the most common genetic disease and presents with cognitive impairment, cardiac and gastrointestinal abnormalities, in addition to other miscellaneous clinical conditions. DS individuals may have a high frequency of infections, usually of the upper respiratory tract, characterized by increased severity and prolonged course of disease, which are partially attributed to defects of the immune system. The abnormalities of the immune system associated with DS include: mild to moderate T and B cell lymphopenia, with marked decrease of naive lymphocytes, impaired mitogen-induced T cell proliferation, reduced specific antibody responses to immunizations and defects of neutrophil chemotaxis. Limited evidence of genetic abnormalities secondary to trisomy of chromosome 21 and affecting the immune system is available, such as the potential consequences of gene over-expression, most significantly SOD1 and RCAN1. Secondary immunodeficiency due to metabolic or nutritional factors in DS, particularly zinc deficiency, has been postulated. Non-immunological factors, including abnormal anatomical structures (e.g. small ear canal, tracheomalacia) and gastro-oesophageal reflux, may play a role in the increased frequency of respiratory tract infections. The molecular mechanisms leading to the immune defects observed in DS individuals and the contribution of these immunological abnormalities to the increased risk of infections require further investigation. Addressing immunological and non-immunological factors involved in the pathogenesis of infectious diseases may reduce the susceptibility to infections in DS subjects.

Volatile (As and Hg) and non-volatile (Pb and Cd) toxic heavy metals analysis in rhizome of Zingiber officinale collected from different locations of North Western Himalayas by Atomic Absorption Spectroscopy.

Ginger is an important ingredient of spice and herbals. The monitoring of toxic heavy metals in the rhizome of ginger is important for protecting public health against the hazards of metal toxicity. The concentration of volatile and non-volatile metals (As, Hg, Pb and Cd), in the soil and rhizome of Zingiber officinale were analyzed using AAS. Soil analysis profile showed uniformity in the metal contents, in active root zone and subsoil, except mercury, which was present in higher quantity in one, out of the four sectors, of the field. The infield metal content in the soil in increasing order was, cadmium < arsenic < lead < mercury. In ginger rhizome the volatile toxic heavy metals arsenic (As) and mercury (Hg) varied from not detected to 0.13 µg/g and 0.01 to 0.42 µg/g, respectively. The non-volatile metals lead (Pb) and cadmium (Cd) ranged from 0.06 to 0.64 µg/g and 0.002 to 0.03 µg/g, respectively(.) The results illustrated the findings that soil is the major but not the only source of metal accumulation in the plants. In our study, the volatile metal content (As, Hg) was found more in rhizomes collected from Himachal Pradesh while the non-volatile metals were predominant in samples from Uttarakhand.

Experimental iron-inactivated Pasteurella multocida A: 1 vaccine adjuvanted with bacterial DNA is safe and protects chickens from fowl cholera.

Fowl cholera is a serious problem in large and small scale poultry production. The present study describes the development and testing of an inactivated whole-cell, low-cost, safe, and effective vaccine for fowl cholera based on a previous work (Vaccine 23:5590-5598). Pasteurella multocida A: 1 grown in the presence of low FeCl(3) concentrations, inactivated with higher concentrations of FeCl(3), and adjuvanted with bacterial DNA from P. multocida B: 2 containing immunostimulatory CpG motifs protect chickens with a lethal P. multocida A: 1 challenge. Chickens were immunized with two whole-cell inactivated vaccine doses at 4 weeks apart and challenged 4 weeks after booster immunization. Experimental vaccines were pure, easy injectable, and caused very little distress in chickens due to their aqueous consistency. Vaccines and bacterial DNA (bDNA) posed no safety problems when chickens were injected subcutaneously (s.c.) with a single, double, and overdose of these preparations. Immunized chickens produced systemic IgY antibodies (Ab) responses and vaccine adjuvanted with bDNA protected 100% chickens from lethal intrapertoneal (i.p.) P. multocida A: 1 challenge. This work suggests that use of bDNA as an adjuvant can improve the cost-effectiveness of inactivated veterinary vaccines for their use in developing countries. Our future studies will focus on safety and potency evaluation of experimental and current vaccines using bDNA as an adjuvant.

Evaluation of mammary gland immunity and therapeutic potential of Tinospora cordifolia against bovine subclinical mastitis.

Enhancement of the diseased mammary gland immunity and therapeutic potential of hydro-methanolic extract of Tinospora cordifolia (T. cordifolia; stem) in bovine subclinical mastitis was investigated. Somatic cell count (SCC), total bacterial count (TBC), phagocytic activity, and leukocyte lysosomal enzymes like myeloperoxidase and acid phosphatase activity and Interleukin-8 (IL-8) level were evaluated after intramammary infusion of hydro-methanolic extract (stem) of T.cordifolia in diseased cows. The qualitative analysis of the extract revealed the presence of polysaccharide, phenol, alkaloid, and protein. Intramammary infusion of hydro-methanolic extract of T. cordifolia treatment initially enhanced the SCC; thereafter, significant reduction in cell count (P < 0.05) was observed on day 15 of the treatment period, however, reduction in TBC was observed from day 3 onwards. The phagocytic activity of milk polymorphonuclear cells enhanced in the diseased cows treated with the T. cordifolia extract. Similarly, the lysosomal enzyme content of the milk polymorphonuclear cells enhanced significantly (P < 0.05) in diseased cows treated with T. cordifolia. The IL-8 level in milk serum also increased significantly (P < 0.05) in diseased cows treated with the herb extract. The results suggest that the hydro-methanolic extract of T.cordifolia (stem) possesses antibacterial and immunomodulatory properties. In the present study, the biological activity of the Tinospora cordifolia extract at standardized dose against bovine subclinical mastitis is reported for the first time. Development of alternative therapy with medicinal plants is an option for livestock farmers who are not allowed to use the conventional allopathic drugs under certain farming system or cannot afford to use allopathic drugs.

C-D modes of deuterated side chain of leucine as structural reporters via dual-frequency two-dimensional infrared spectroscopy.

Perdeuteration of the side chains of amino acids such as leucine results in appearance of reasonably strong absorption peaks around 2050-2220 cm(-1) that belong to the CD stretching modes and exhibit extinction coefficients of up to 120 M(-1) cm(-1). The properties of the CD stretching transitions in leucine-d(10) as structural labels are studied via the methods of two-dimensional infrared (2DIR) spectroscopy. The cross peaks caused by interactions of the CD stretching modes with amide I (Am-I), CO, and amide II (Am-II) modes are obtained by the dual-frequency 2DIR method. The CD stretching peaks in leucine-d(10) are characterized using DFT computational modeling as well as relaxation-assisted 2DIR (RA 2DIR) measurements. The RA 2DIR measurements showed different enhancements and different energy transport times (arrival times) for different CD/Am-II and CD/CO cross peaks; a correlation between the intermode distance, the arrival time, and the amplification factor is reported. We demonstrated that the CD transitions of leucine-d(10) amino acid can serve as convenient structural reporters via the dual-frequency 2DIR methods and discussed the potential of leucine-d(10) and other amino acids with deuterium-labeled side chains as probes of protein structure and dynamics.