The influence of oral cavity physiological parameters: temperature, pH, and swelling on the performance of denture adhesives - in vitro study.

BACKGROUND: The various physical and chemical conditions within the oral cavity are hypothesized to have a significant influence on the behavior of denture adhesives and therefore the overall comfort of denture wearers. As such, this study aims to understand the influence of oral cavity physiological parameters such as temperature (17 to 52 °C), pH (2, 7, 10), and denture adhesive swelling due to saliva (20-120%) on the behavior of denture adhesives. This study further aims to emphasize the need for a collective approach to modelling the in-situ behavior of denture adhesives. METHODS: Rheological measurements were carried out using the Super Polygrip Ultra fresh brand denture adhesive cream to evaluate its storage modulus (G´) and loss modulus (G´´) values at a range of physiologically relevant temperatures, pH values, and degrees of swelling, to represent and characterize the wide variety of conditions that occur within the oral cavity. RESULTS: Rheological data was recorded with respect to variation of temperature, pH, and swelling. Overall, it can be seen that the physiological conditions of the oral cavity have an influence on the rheological properties of the denture adhesive cream. Specifically, our data indicates that the adhesive's mechanical properties are weakly influenced by pH, but do change with respect to the temperature in the oral cavity and the swelling rate of the adhesive. CONCLUSIONS: Our results suggest that the collective inter-play of the parameters pH, temperature and swelling ratio have an influence on the behavior of the denture adhesive. The results clearly highlight the need for developing a multi-parameter viscoelastic material model to understand the collective influence of physiological parameters on the performance of denture adhesives. Multi-parameter models can also potentially be utilized in numerically simulating denture adhesives using finite element simulations.

Mapping the role of oral cavity physiological factors into the viscoelastic model of denture adhesives for numerical implementation.

Physiological parameters of the oral cavity have a profound impact on any restorative solutions designed for edentulous patients including denture adhesives. This study aims to mathematically quantify the influence of three such variables, namely: the temperature, pH, and the swelling of such adhesives under the influence of saliva on its mechanical behavior. The mathematical quantification is further aimed to implement a material model for such adhesives which considers the impact of such physiological factors. The denture adhesive is experimentally investigated by means of rheological steady state frequency sweep tests to obtain the relaxation spectrum of the material. The relaxation behavior is measured for a wide range of oral cavity temperatures and pH. Also, the adhesive is hydrated and upon swelling to different levels again tested to understand the impact of swelling on the mechanical behavior. The experimentally measured continuous relaxation spectrum is modeled as a viscoelastic material using a discrete set of points based on the Prony series discretization technique. The relaxation spectrums for various temperatures are compared and the possibility of a time-temperature superposition is explored for the model. Similarly, the measured values of Storage and loss modulus are investigated to understand the role of pH and swelling. The results in this study clearly indicated a horizontal shift in the relaxation behavior with increase in temperature. And hence, the time-temperature shift factor was calculated for the adhesive. The relaxation spectrum also showed a strong correlation with swelling of the adhesive and the pH. The influence of these two parameters were captured into the model based on the relaxation time parameter in the Prony series approach. Based on this study the impact of these parameters could be appreciated on the performance and mechanical behavior of denture adhesives and implemented into a Prony series based viscoelastic material model which can be used with numerical simulations.

Perceptual learning deficits mediated by somatostatin releasing inhibitory interneurons of olfactory bulb in an early life stress mouse model.

Early life adversity (ELA) causes aberrant functioning of neural circuits affecting the health of an individual. While ELA-induced behavioural disorders resulting from sensory and cognitive disabilities can be assessed clinically, the neural mechanisms need to be probed using animal models by employing multi-pronged experimental approaches. As ELA can alter sensory perception, we investigated the effect of early weaning on murine olfaction. By implementing go/no-go odour discrimination paradigm, we observed olfactory learning and memory impairments in early life stressed (ELS) male mice. As olfactory bulb (OB) circuitry plays a critical role in odour learning, we studied the plausible changes in the OB of ELS mice. Lowered c-Fos activity in the external plexiform layer and a reduction in the number of dendritic processes of somatostatin-releasing, GABAergic interneurons (SOM-INs) in the ELS mice led us to hypothesise the underlying circuit. We recorded reduced synaptic inhibitory feedback on mitral/tufted (M/T) cells, in the OB slices from ELS mice, explaining the learning deficiency caused by compromised refinement of OB output. The reduction in synaptic inhibition was nullified by the photo-activation of ChR2-expressing SOM-INs in ELS mice. The role of SOM-INs was revealed by learning-dependent refinement of Ca2+dynamics quantified by GCaMP6f signals, which was absent in ELS mice. Further, the causal role of SOM-INs involving circuitry was investigated by optogenetic modulation during the odour discrimination learning. Photo-activating these neurons rescued the ELA-induced learning deficits. Conversely, photo-inhibition caused learning deficiency in control animals, while it completely abolished the learning in ELS mice, confirming the adverse effects mediated by SOM-INs. Our results thus establish the role of specific inhibitory circuit in pre-cortical sensory area in orchestrating ELA-dependent changes.

Robot and mechanical testing of a specialist manual toothbrush for cleaning efficacy and improved force control.

BACKGROUND: Toothbrushes require flexibility to access all dental surfaces and remove plaque effectively, but they should also aim to prevent or limit overbrushing and consequent damage to teeth and gums. In two studies, the physical properties and cleaning performance of specialist test toothbrushes with flexible necks were compared to a reference rigid-necked toothbrush. METHODS: In Study 1, a universal testing machine (Instron E 10,000) with a specially designed setup was used to test the deflection behaviour of toothbrush head and neck. Untufted toothbrushes were fixed in a custom holder and force was applied to the head while the deflection was measured. In Study 2, one control and five test toothbrushes were assessed using a robot system to simulate the cleaning of artificial plaque from defined surfaces of artificial replicated human teeth in a model oral cavity (typodonts). RESULTS: Study 1 showed that the flexible-neck toothbrush deflected 2 to 2.5 times more than the rigid-neck reference toothbrush when same force was applied to the toothbrush head. Study 2 revealed that all five test toothbrushes showed statistically superior simulated plaque removal to the reference toothbrush. This superiority was observed for all test toothbrushes employing horizontal and rotating brushing action (all p = 0.001) but only three of the five toothbrushes when vertical brushing was employed (all p = 0.001). Cleaning efficacy of the test toothbrushes was demonstrated both interdentally and at the gumline locations. The Complete Protection toothbrush showed the most effective cleaning performance followed by the Repair and Protect and Rapid Relief toothbrushes. CONCLUSION: The addition of a flexible-neck component to the toothbrush designs helped to reduce stiffness and may allow more effective cleaning compared to rigid designs with controlled force distribution on the teeth and gums. This may help to provide plaque control at all potential risk areas in an in vitro robot model and could support good oral hygiene in-use.

Numerical study of the stress state on the oral mucosa and abutment tooth upon insertion of partial dentures in the mandible.

The introduction of a removable partial denture onto the dental arch significantly influences the mechanical stress characteristics of both the jawbone and oral mucosa. The aim of this study was to analyze the stress state caused by biting forces upon insertion of partial dentures into the assembly, and to understand the influence of the resulting contact pressure on its retention behavior. For this purpose, a numerical model of a removable partial denture is proposed based on 3D models developed using computer tomography data of the jawbone and the removable partial denture. The denture system rests on the oral mucosa surface and three abutment teeth. The application of bite forces on the denture generated a stick condition on the loaded regions of the denture-oral mucosa interface, which indicates positive retention of the denture onto the oral mucosa surface. Slip and negative retention were observed in the regions of the contact space that were not directly loaded. The contact pressures observed in the regions of the oral mucosa in contact with the denture were below the clinical pressure pain threshold value for soft tissue, which potentially lowers the risk of pain being experienced by denture users. Further, the variation of the retention behavior and contact pressures across different regions of the denture assembly was observed. Thus, there is a need for adhesives or restraining mechanisms for the denture system in order to avoid bending and deformation of sections of the denture as a consequence of the applied bite force.

Finite Element Evaluation of the Effect of Adhesive Creams on the Stress State of Dentures and Oral Mucosa.

The base fit between a removable partial denture (RPD) and the underlying soft tissue plays a significant role in its performance. The application of a denture adhesive is hypothesized to result in better retention of RPDs and, as a result, contribute to lower stress on the oral mucosa. The objectives of this study were to observe and compare the distribution of simulated bite forces applied to the RPD through the abutments and soft tissue for models with and without the use of a denture adhesive. Furthermore, we evaluated the possible benefit of using a denture adhesive in lowering stresses on the oral mucosa. The RPD, mandible, oral mucosa, abutment teeth supporting the RPD, and the corresponding abutment periodontal ligaments (PDLs) were modelled as 3D volumes based on computer tomography (CT) datasets. A viscoelastic adhesive layer between the RPD and oral mucosa was incorporated into this base model using Prony series approximation. The layer was developed as a volume extract using the denture surface. Finite element (FE) simulations were performed for the bite force on one of the RPD segments, with the resulting force and moments experienced by the dental structures and oral mucosa compared between the model with the adhesive layer and the base model without. As a result, the contact pressure on the oral mucosa for the model with the denture adhesive decreased to 0.15 MPa as compared to 0.25 MPa for the model without the adhesive. The potential role of denture adhesives in leading to a better fit between the RPD and oral mucosa as well as lowering contact pressures could be used to improve comfort in patients wearing RPDs.

Differential expression of CRAC channel in alloxan induced Diabetic BALB/c mice.

Objectives: CRAC (Calcium Release Activated Calcium) channel is one of the most important channels regulating calcium influx and has been involved in many autoimmune diseases. The contribution of CRAC channel in the pathogenesis of Type 1 Diabetes (T1D) has not been described much. Thus, we aimed to study the expression of CRAC channel and inflammatory cytokines like IL-1ß (Interleukin -1ß) and TNF-α (Tumor Necrosis Factor-α) in the spleen-derived cytotoxic T cells, Bone marrow monocytes (BMM) and macrophages differentiated from BMM in the alloxan induced T1D mice.Materials and methods: BALB/c mice treated with alloxan and vehicle control for 12 and 24 h. Spleen derived T cells; Bone marrow derived monocytes were isolated from the control and diabetic BALB/c mice as well as macrophages differentiated from the control and diabetic BMM.Results: We observed increased expression of CRAC channel components like STIM1 (Stromal Interaction Molecule), ORAI1 and ORAI2 and inflammatory cytokines like IL-1ß and TNF-α in the spleen derived cytotoxic T cells and Macrophages differentiated from BMM as well as the downregulated expression of the same and CRAC channel in BMM of 12 and 24 h alloxan induced BALB/c mice.Conclusions: This study suggests that differential expression of CRAC channel correlated with the expression of inflammatory cytokines, thus CRAC channel might be responsible for the increased production of inflammatory cytokines in the alloxan induced T1D mice.

Understanding autoimmunity: The ion channel perspective.

Ion channels are integral membrane proteins that orchestrate the passage of ions across the cell membrane and thus regulate various key physiological processes of the living system. The stringently regulated expression and function of these channels hold a pivotal role in the development and execution of various cellular functions. Malfunction of these channels results in debilitating diseases collectively termed channelopathies. In this review, we highlight the role of these proteins in the immune system with special emphasis on the development of autoimmunity. The role of ion channels in various autoimmune diseases is also listed out. This comprehensive review summarizes the ion channels that could be used as molecular targets in the development of new therapeutics against autoimmune disorders.

A comparison of aquaporin function in mediating stomatal aperture gating among drought-tolerant and sensitive varieties of rice (Oryza sativa L.).

Climate change drastically affects the cultivation of rice, and its production is affected significantly by water stress. Adaptation of a plant to water deficit conditions is orchestrated by efficient water uptake and a stringently regulated water loss. Transpiration remains the major means of water loss from plants and is mediated by microscopic pores called stomata. Stomatal aperture gating is facilitated by ion channels and aquaporins (AQPs) which regulate the turgidity of the guard cells. In a similar manner, efficient water uptake by the roots is regulated by the presence of AQPs in the plasma membrane of root cells. In this study, we compare the efficiency of transmembrane water permeability in guard cells and root protoplasts from drought-tolerant and sensitive varieties of Oryza sativa L. In this report, we studied the transmembrane osmotic water permeability (Pos) of guard cell and root protoplasts of drought-sensitive and tolerant cultivars. The guard cells isolated from the drought-sensitive lowland rice variety ADT-39 show significant low osmotic permeability than the drought-tolerant rice varieties of Anna (lowland) and Dodda Byra Nellu (DBN) (upland local land rice). There is no significant difference in relative gene expression patterns of PIPs (Plasma membrane Intrinsic Proteins "PIP1" and "PIP2" subfamilies) in guard cells isolated from ADT-39 and Anna. While the expression levels of AQP genes remain the same between ADT-39 and Anna, there is a drastic difference in their osmotic permeability in the guard cells in spite of a higher number of stomata in Anna and DBN, hinting at a more efficient gating mechanism of AQP in the stomata of the drought-tolerant varieties studied.

Suppression of different classes of somatic mutations in Arabidopsis by vir gene-expressing Agrobacterium strains.

BACKGROUND: Agrobacterium infection, which is widely used to generate transgenic plants, is often accompanied by T-DNA-linked mutations and transpositions in flowering plants. It is not known if Agrobacterium infection also affects the rates of point mutations, somatic homologous recombinations (SHR) and frame-shift mutations (FSM). We examined the effects of Agrobacterium infection on five types of somatic mutations using a set of mutation detector lines of Arabidopsis thaliana. To verify the effect of secreted factors, we exposed the plants to different Agrobacterium strains, including wild type (Ach5), its derivatives lacking vir genes, oncogenes or T-DNA, and the heat-killed form for 48 h post-infection; also, for a smaller set of strains, we examined the rates of three types of mutations at multiple time-points. The mutation detector lines carried a non-functional ß-glucuronidase gene (GUS) and a reversion of mutated GUS to its functional form resulted in blue spots. Based on the number of blue spots visible in plants grown for a further two weeks, we estimated the mutation frequencies. RESULTS: For plants co-cultivated for 48 h with Agrobacterium, if the strain contained vir genes, then the rates of transversions, SHRs and FSMs (measured 2 weeks later) were lower than those of uninfected controls. In contrast, co-cultivation for 48 h with any of the Agrobacterium strains raised the transposition rates above control levels. The multiple time-point study showed that in seedlings co-cultivated with wild type Ach5, the reduced rates of transversions and SHRs after 48 h co-cultivation represent an apparent suppression of an earlier short-lived increase in mutation rates (peaking for plants co-cultivated for 3 h). An increase after 3 h co-cultivation was also seen for rates of transversions (but not SHR) in seedlings exposed to the strain lacking vir genes, oncogenes and T-DNA. However, the mutation rates in plants co-cultivated for longer times with this strain subsequently dropped below levels seen in uninfected controls, consistent with the results of the single time-point study. CONCLUSIONS: The rates of various classes of mutations that result from Agrobacterium infection depend upon the duration of infection and the type of pathogen derived factors (such as Vir proteins, oncoproteins or T-DNA) possessed by the strain. Strains with vir genes, including the type used for plant transformation, suppressed selected classes of somatic mutations. Our study also provides evidence of a pathogen that can at least partly counter the induction of mutations in an infected plant.

Parental age affects somatic mutation rates in the progeny of flowering plants.

In humans, it is well known that the parental reproductive age has a strong influence on mutations transmitted to their progeny. Meiotic nondisjunction is known to increase in older mothers, and base substitutions tend to go up with paternal reproductive age. Hence, it is clear that the germinal mutation rates are a function of both maternal and paternal ages in humans. In contrast, it is unknown whether the parental reproductive age has an effect on somatic mutation rates in the progeny, because these are rare and difficult to detect. To address this question, we took advantage of the plant model system Arabidopsis (Arabidopsis thaliana), where mutation detector lines allow for an easy quantitation of somatic mutations, to test the effect of parental age on somatic mutation rates in the progeny. Although we found no significant effect of parental age on base substitutions, we found that frameshift mutations and transposition events increased in the progeny of older parents, an effect that is stronger through the maternal line. In contrast, intrachromosomal recombination events in the progeny decrease with the age of the parents in a parent-of-origin-dependent manner. Our results clearly show that parental reproductive age affects somatic mutation rates in the progeny and, thus, that some form of age-dependent information, which affects the frequency of double-strand breaks and possibly other processes involved in maintaining genome integrity, is transmitted through the gametes.