RESUMO
(1) Background: The COVID-19 pandemic has brought about a change in the concept of teaching with the introduction of online lectures and "distance learning." The aim of this study was to determine the impact of the COVID-19 pandemic on the confidence and both theoretical and practical knowledge of dental students regarding the courses in conservative dentistry and endodontics. (2) Methods: The study was conducted using an originally created online questionnaire consisting of 30 questions that the students used to make a subjective assessment of their confidence in performing both endodontic and conservative procedures using numerical scales. They were divided into two groups, a non-COVID group of students, who attended classes before the outbreak of the pandemic, and a COVID group, whose classes were suspended due to the lockdown. The data were processed in the SPSS statistic 25 program, with statistical significance p < 0.05. (3) Results: The comparison of the self-assessment of 96 students from the COVID group and 91 students from the non-COVID group revealed significant results. Compared with the COVID group, the non-COVID students felt more confident in the application of anesthesia in both the maxilla and mandible, in the initial treatment of patients in pain, as well as in all the steps of the endodontic treatment. Both groups felt equally confident in diagnostic and conservative procedures, and the level of theoretical knowledge acquired in the courses. (4) Conclusions: Changes in teaching due to the COVID-19 pandemic had an unfavorable effect on students' self-confidence in performing routine dental interventions, especially in the endodontic field. The lack of confidence in the COVID group regarding the anesthetic and endodontic procedures appears due to their inability to do any of these procedures during the COVID period; we organized summer practical school under the supervision of teachers, and they gained the necessary knowledge and self-confidence for these procedures.
RESUMO
OBJECTIVES: To assess and compare the cell viability and ion release profiles of two conventional glass ionomer cements (GICs), Fuji IX and Ketac Molar EasyMix, modified with TiO2 and Mg-doped-HAp nanoparticles (NPs). METHODS: TiO2 NPs, synthesized via a sol-gel method, and Mg-doped hydroxyapatite, synthesized via a hydrothermal process, were incorporated into GICs at a concentration of 5 wt.%. The biocompatibility of prepared materials was assessed by evaluating their effects on the viability of dental pulp stem cells (DPSCs), together with monitoring ion release profiles. Statistical analysis was performed using One-way analysis of variance, with significance level p < 0.05. RESULTS: The addition of NPs did not significantly affect the biocompatibility of GICs, as evidenced by comparable decreased levels in cell viability to their original formulations. Distinct variations in cell viability were observed among Fuji IX and Ketac Molar, including their respective modifications. FUJI IX and its modification with TiO2 exhibited moderate decrease in cell viability, while other groups exhibited severe negative effects. While slight differences in ion release profiles were observed among the groups, significant variations compared to original cements were not achieved. Fluoride release exhibited an initial "burst release" within the initial 24 h in all samples, stabilizing over subsequent days. CONCLUSIONS: The addition of NPs did not compromise biocompatibility, nor anticariogenic potential of tested GICs. However, observed differences among FUJI IX and Ketac Molar, including their respective modifications, as well as induced low viability of DPSC by all tested groups, suggest the need for careful consideration of cement composition in their biological assessments. CLINICAL SIGNIFICANCE: The findings contribute to understanding the complex interaction between NPs and GIC matrices. However, the results should be interpreted recognizing the inherent limitations associated with in vitro studies. Further research avenues could explore long-term effects, in vivo performance, and potential clinical applications.
Assuntos
Sobrevivência Celular , Polpa Dentária , Durapatita , Fluoretos , Cimentos de Ionômeros de Vidro , Magnésio , Teste de Materiais , Nanopartículas , Titânio , Titânio/química , Cimentos de Ionômeros de Vidro/química , Sobrevivência Celular/efeitos dos fármacos , Durapatita/química , Humanos , Polpa Dentária/citologia , Polpa Dentária/efeitos dos fármacos , Nanopartículas/química , Fluoretos/química , Magnésio/química , Células-Tronco/efeitos dos fármacos , Materiais Biocompatíveis/química , Íons , Células CultivadasRESUMO
As oxidative stress has been implicated in the pathogenesis of diabetes mellitus and periodontitis, it may serve as a link between these conditions. Therefore, as a part of the present study, salivary lipid peroxidation (LP) in periodontitis patients with and without diabetes mellitus type 2 (DM2) was evaluated, along with the periodontal therapy effectiveness. The study sample comprised of 71 DM2 patients with periodontitis and 31 systemically healthy controls suffering from periodontitis of comparable severity. In all participants, periodontal indicesplaque index (PI), gingival index (GI), papilla bleeding index (PBI), probing pocket depth (PPD), and clinical attachment level (CAL)were recorded, and salivary LP was measured using a spectrophotometric method prior to treatment initiation and three months post-treatment. At baseline, mean salivary LP in DM2 patients was higher than that measured for the control group, but the difference did not reach statistical significance (p > 0.05), whereas a positive significant correlation was found between PPD and LP in both groups. Three months after nonsurgical periodontal therapy, clinical periodontal parameters and salivary LP levels were significantly reduced in both groups (p < 0.05). These findings indicate that the improvement in clinical periodontal status following nonsurgical periodontal therapy is accompanied by a significant decrease in salivary LP in DM2 patients, suggesting that periodontitis, rather than diabetes, is the primary driver of the elevated salivary LP in this group.
RESUMO
Diabetes and periodontitis are complex chronic diseases that are potentially interrelated, as well as associated with oxidative stress. Thus, the aim of the present study was to evaluate the influence of nonsurgical periodontal treatment on salivary 8-hydroxy-deoxyguanosine (8-OHdG) levels and glycemic control in patients suffering from both diabetes mellitus type 2 (DM2) and periodontitis. The study sample included 53 DM2 patients, while 31 systemically healthy patients served as controls. Participants in both groups suffered from periodontitis of comparable severity. Periodontal clinical parameters, namely plaque index (PI), gingival index (GI), papilla bleeding index (PBI), probing pocket depth (PPD), and clinical attachment level (CAL) were recorded, along with salivary 8-OHdG levels and glycated hemoglobin (HbA1c). Levels of 8-OHdG were analyzed by ELISA. All aforementioned parameters were evaluated prior to commencing the study and at 90-day follow-up upon nonsurgical periodontal therapy completion. At baseline, salivary levels of 8-OHdG in DM2 patients were significantly higher (1.17 ng/mL) than those measured for the control group (0.75 ng/mL) and showed significant positive correlation with GI and PPD (p < 0.05). Three months after nonsurgical periodontal therapy, the salivary 8-OHdG levels were significantly reduced in DM2 patients (p < 0.05). Analysis results also revealed statistically significant changes in all measured clinical parameters between baseline and three-month follow-up in both groups (p < 0.05). Upon treatment completion, a decline in the HbA1c level was noted in DM group, but it did not reach statistical significance (p > 0.05). It can be concluded that DM2 patients benefit from non-surgical periodontal therapy, as indicated by a marked reduction in their salivary 8-OHdG level and a modest improvement in glycemic control. Short-term clinical benefits noted in the DM group were similar to those observed in the non-diabetic periodontal patients.
RESUMO
Lipid peroxidation (LPO) participates in the development of various diseases, including periodontitis, and malondialdehyde (MDA) is its terminal product. Therefore, in the present study, salivary and plasma MDA levels in 30 periodontitis patients were compared to those in 20 healthy controls, as well as in relation to periodontal therapy in order to assess its effectiveness. Periodontal status was assessed via plaque index, gingival index, papilla bleeding index, probing depth and clinical attachment level, while salivary and plasma MDA levels were determined by the ELISA method. The periodontitis group had a significantly greater salivary (2.99 pmol/µL) and plasma (0.50 pmol/µL) MDA levels relative to the healthy controls (1.33 pmol/µL and 0.40 pmol/µL, respectively). Three months after the periodontal therapy completion, although salivary MDA levels were significantly lower than those measured at the baseline (p < 0.001), the reduction in plasma MDA was not statistically significant (p > 0.05). These findings indicate that, while inflammatory processes in periodontium may increase local and systemic lipid peroxidation, periodontal therapy can result in a significant decrease in salivary, but not plasma, MDA levels.
RESUMO
The degree of polymerization for dimethacrylate resin-based materials (BisGMA, TEGDMA, UDMA, HEMA) ranges from 55 to 75%. Literature data indicate that polymerization efficacy depends, among other factors, on the type of methacrylate resin comprising the material. The aim of this study was to evaluate the polymerization efficacy of four dental cement materials characterized by different polymerization mechanisms using FTIR analysis. In the present study, the FTIR method was adopted to analyze the degree of polymerization efficacy of four resin-based dental cement materials, two of which were self-cured and two were dual-cured cements. The IR spectral analysis was performed 24 h after the polymerization of the cementitious material. RelyX ARC cement exhibits the lowest polymerization efficacy (61.3%), while that of Variolink II (85.8%) and Maxcem Elite is the highest (90.1%). Although the efficacy of self-cured cements appears to be superior, the difference is not statistically significant (p = 0.280). Polymerization efficacy largely depends on the chemical structure of the material in terms of the presence of a particular methacrylate resin and less on the polymerization mechanism itself, i.e., whether it is a self-cured or dually cured dental cement. Thus, in clinical practice, cementitious materials with a higher proportion of TEGDMA compared with BisGMA are recommended.
RESUMO
The study goal was to provide an overview of antibiotic prescribing practices of Serbian dentists when treating endodontic infections and to disseminate the current ESE (European Society of Endodontology) recommendations to the study participants. A link to an online questionnaire was sent to 628 Serbian dentists whose email addresses were publicly available on the Internet, 158 of whom responded to the survey, resulting in a 25.16% response rate. The significance of possible associations was assessed via the Chi-squared test and Cramer's V measure of association, with p < 0.05 considered as statistically significant. According to the study findings, 55.7% of respondents prescribed a 5-day antibiotic course. Moreover, Amoxicillin 500 mg was the first-choice antibiotic for 55.1% of the respondents, followed by Clindamycin 600 mg (18.4%). For patients allergic to penicillin, 61.4% of respondents prescribed Clindamycin. Statistically significant differences emerged only in relation to acute apical abscess with systemic involvement, whereby dentists aged 46-55 were least likely to prescribe antibiotics in these clinical situations (p = 0.04). Analyses further revealed that recommendations for safe antibiotic prescribing practices were not always followed, as in certain cases, patients were given antibiotics even when this was not indicated. These findings highlight the need for additional education on responsible antibiotic use to prevent bacterial resistance.
RESUMO
The objective of this study was observation of the adhesive interface on original tooth samples, as well as their epoxy replicas, under SEM. A light-cure flowable composite was incrementally placed and light-polymerized in previously prepared cylindrical dentinal cavities on the buccal surfaces of extracted human third molars. After finishing procedures, impressions of the composite/dentin margin were made using polyvinylsiloxane in order to obtain accurate epoxy replicas for SEM analysis. Ultrastructural morphology of the adhesive surface was observed at high magnifications (≥1,000×) on original tooth samples, which were previously prepared to expose the part of the dentin surface, which participates in the formation of adhesive bond. SEM micrographs showed that marginal adaptation was mostly of acceptable quality. In some of the SEM micrographs of original tooth samples, marginal gap formation, and resin tag breakdown were noted, which were ascribed to polymerization shrinkage. Profound understanding of ultrastructural morphology is necessary for achieving more predictable and durable margin between composite restorations and surrounding tooth structures, and SEM analysis can serve that purpose.
Assuntos
Colagem Dentária , Cimentos de Resina , Adesivos , Resinas Compostas , Restauração Dentária Permanente , Dentina , Adesivos Dentinários , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura , Polimerização , Propriedades de SuperfícieRESUMO
BACKGROUND While several tests can be used in the laboratory evaluation of composite resin-based cement materials, the push-out test remains the most prevalent. Due to difficulties in sample preparation, as well as a highly complex procedure, we attempted to develop an alternative method for testing the bond strength of dental resin cement materials. MATERIAL AND METHODS Ninety-six experimental samples of 2 dual-cure resin cements and 1 fiber post system were prepared for the 2 testing procedures: the push-out test and the modified Microbond test. The degree of monomer conversion was measured by Fourier-transform infrared spectroscopy. RESULTS The push-out test results indicated that the bond strength of dual-cure resin cement differs depending on the tooth root region to which it is applied (p<0.05), In addition, our findings show that Variolink II exhibits a much lower bond strength relative to RelyX ARC. These findings were confirmed by the modified Microbond test results. The monomer conversion rate results indicate average conversion rates of 85.81% and 61.35% for RelyX ARC and Variolnik II, respectively. CONCLUSIONS Our study confirms the practical utility of the modified Microbond test in the assessment of bond strength of dental cement resin-based materials. The proposed test method is particularly useful given that, relative to the push-out test, it requires a much smaller number of preparation and execution steps, thus reducing the potential for introducing errors, while increasing the reliability of the obtained findings.
Assuntos
Colagem Dentária/métodos , Cimentos Dentários/química , Cimentos de Resina/química , Adesivos , Bis-Fenol A-Glicidil Metacrilato , Resinas Compostas/química , Materiais Dentários/química , Porcelana Dentária , Cavidade Pulpar , Análise do Estresse Dentário , Dentina , Humanos , Teste de Materiais , Polietilenoglicóis , Ácidos Polimetacrílicos , Reprodutibilidade dos Testes , Resinas Sintéticas/química , Raiz DentáriaRESUMO
PURPOSE: To verify the influence of placement and polymerization technique on the gap width between dentin and composite restoration. METHODS: Standardized cylindrical cavities (3 mm in diameter, 2 mm deep) with all margins in dentin were prepared on buccal and oral surfaces of 30 extracted human third molars. With regard to the different resin composite filling techniques used, the samples were randomly divided into three groups (n=20): bulk; incremental; pin. Each group was further subdivided into subgroups based on different light polymerization techniques): continuous (40 seconds); discontinuous (2 seconds of activation, followed by 10 seconds of dark interval, then light polymerization continued for 38 seconds). After finishing procedures, impressions were made using polyvinylsiloxane, and epoxy resin replicas were obtained and prepared for scanning electron microscopy. The percentage of the marginal gaps in relation to the whole margin was recorded and statistically analyzed (P)≤ 0.05). RESULTS: Marginal adaptation of composite restorations placed into the dentin cavities using pin and discontinuously light polymerized presented significantly better results than other two tested groups polymerized in the same manner. CLINICAL SIGNIFICANCE: The proposed modified incremental placement technique with a transparent glass pin reduces marginal leakage at the interface between composite restoration and dentin; leakage which can jeopardize the longevity of the restoration.
Assuntos
Resinas Compostas , Infiltração Dentária , Adaptação Marginal Dentária , Restauração Dentária Permanente , Preparo da Cavidade Dentária , Humanos , Microscopia Eletrônica de Varredura , Polimerização , Distribuição Aleatória , Cimentos de ResinaRESUMO
The aim of this study was to analyse the interfacial micromorphology of total-etch adhesives and dentin structures different locations by using SEM. Standardized cylindrical cavities (3mm in diameter, 2mm deep) with all margins in dentin were prepared on occlusal and buccal surfaces of twenty extracted human third molars. A total-etch dentin adhesive system and a light-cure flowable composite (Filtek Ultimate Flowable, 3M ESPE, St. Paul, MN, USA) were used in this study. Micro-morphological SEM analysis of the marginal seal of the original tooth specimens was performed using high magnification of up to 1000×. In this study, we found the difference in interfacial micromorphology in dentin different locations. Also, marginal gap was found in both observed dentin area. Better understanding of complexity and three- dimensional variations of the tooth structure is important for prevention of clinical challenges such as postoperative sensitivity, marginal discoloration and secondary caries, which could be prevented by achieving of predictable and long-lasting adhesive bond.
Assuntos
Resinas Compostas/análise , Dentina/ultraestrutura , Cimentos de Resina/análise , Colagem Dentária , Materiais Dentários/análise , Materiais Dentários/química , Cavidade Pulpar/anatomia & histologia , Cavidade Pulpar/química , Cavidade Pulpar/ultraestrutura , Análise do Estresse Dentário , Adesivos Dentinários/química , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura/métodos , Dente Serotino/ultraestrutura , Cimentos de Resina/química , Propriedades de SuperfícieRESUMO
INTRODUCTION: The ultimate goal in restorative dentistry has always been to achieve strong and permanent bond between the dental tissues and filling materials. It is not easy to achieve this task because the bonding process is different for enamel and dentin-dentin is more humid and more organic than enamel. It is moisture and organic nature of dentin that make this hard tissue very complex to achieve adhesive bond. One of the first and most widely used tools for examining the adhesive bond between hard dental tissues and composite restorative materials is scanning electron microscopy. The aim of this study was scanning electron microscopy analyzes the interfacial micro morphology of total-etch and self-etch adhesives. MATERIAL AND METHODS: Micro morphological characteristics of interface between total-etch adhesive (Prime & Bond NT) in combination with the corresponding composite (Ceram X Mono) were compared with those of self-etching adhesive (AdheSE One) in, combination with the corresponding composite (Tetric EvoCeram). The specimens were observed under 1000 x magnification of scanning electron microscopy (JEOL, JSM-6460 Low Vacuum). Measurement of the thickness of the hybrid layer of the examined com posite systems was performed with the software of the device used (NIH Image Analyser). RESULTS: Micromorphological analysis of interface showed that the hybrid layer in sound dentin was well formed, its average thickness being 2.68 microm, with a large number of resin tags and a large amount of lateral branches for specimens with a composite system Prime & Bond NT-Ceram X Mono. However, the specimens' with composite systems Adhese One-Tetric EvoCeram did not show the presence of hybrid layer and the resin tags were poorly represented. CONCLUSION: The results of this study suggest that total-etch adhesives bond better with sound dentin than self-etch adhesive.
Assuntos
Colagem Dentária , Cimentos Dentários , Corrosão Dentária , Condicionamento Ácido do Dente , Resinas Acrílicas , Resinas Compostas , Análise do Estresse Dentário , Dentina , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura , Ácidos PolimetacrílicosRESUMO
INTRODUCTION: Predictable endodontic treatment depends on the dentist's knowledge about root canal morphology and its possible anatomic variations. The majority of mandibular canines have one root and root canal, but 15% may have two canals and a smaller number may have two distinct roots. The following clinical reports describe endodontic treatment of mandibular canines with two roots and two root canals. OUTLINE OF CASES Four clinical case reports are presented to exemplify anatomical variation in the human mandibular canine. Detailed analysis of the preoperative radiographs and careful examination of the pulp chamber floor detected the presence of two root canal orifices in all canines. Working length was determined with an electronic apex locator and biomechanical preparation was carried out by using engine driven BioRaCe Ni-Ti rotary instruments in a crown-down manner, followed by copious irrigation with 1% sodium hypochlorite. Definitive obturation was performed using cold lateral condensation with gutta-percha cones and Top Seal paste. The treatment outcome was evaluated using postoperative radiographs. CONCLUSION: Endodontists should be aware of anatomical variations of the treated teeth, and should never presume that canal systems are simple.
Assuntos
Preparo de Canal Radicular , Tratamento do Canal Radicular , Raiz Dentária/anormalidades , Cavidade Pulpar , Guta-Percha , Humanos , Níquel , TitânioRESUMO
INTRODUCTION: Maxillary incisors and specifically their crowns are the most common teeth involved in dental trauma because of their exposed position in the dental arch. Traumatized anterior teeth require quick functional and esthetic repair. In the case of a complex crown fracture, with the necessity of endodontic treatment, fiber-reinforced posts (FRC) were used to create a central support stump to restore the dental morphology. CASE REPORT: A 24-year-old male patient came to the dental clinic with dental injury to the maxillary left central incisor with a chisel-type fracture that extended subgingivally with a widely open pulp chamber. The patient reported a sports injury had occurred 1 day before. Provisional reposition of the crown was completed using a composite splint and after that endodontic treatment has been performed. Two days later, a fiber-reinforced composite resin post was placed into the canal and adhesive reattachment of the fragment also completed. The tooth was prepared for a composite resin veneer in the gingival third of the vestibular surface because of a visible fracture line. CONCLUSIONS: The combined use of a fiber-reinforced composite resin post and the original crown fragment is a simple and efficient procedure for the treatment of traumatized anterior teeth that appears to offer pleasing esthetic and functional results that is less invasive than conventional prosthodontic treatment.
Assuntos
Traumatismos em Atletas/cirurgia , Incisivo/lesões , Técnica para Retentor Intrarradicular , Coroa do Dente/lesões , Fraturas dos Dentes/cirurgia , Traumatismos em Atletas/complicações , Humanos , Incisivo/cirurgia , Masculino , Coroa do Dente/cirurgia , Fraturas dos Dentes/complicações , Adulto JovemRESUMO
INTRODUCTION: The failure of primary endodontic treatment is manifested by various clinical symptoms following endodontic therapy or, more frequently, by the development of chronic inflammatory process in the apex region without any subjective symptoms. In case of unfavorable outcome of the primary endodontic treatment, orthograde endodontic retreatment is the method of choice for a prolonged therapy. OUTLINE OF CASES: Two female patients, 47 and 44 years old, were presented at the Dental Clinic of Vojvodina for endodontic retreatment of teeth 22, 23 and 13, within the repeated prosthetic restoration. Intraradicular individual cast posts were removed using ultrasonic instruments. Remains of gutta-percha were removed by engine driven rotary re-treatment files, root canals were shaped and cleaned using the crown-down technique, and obturated with gutta-percha and epoxy-resin-based sealer using the lateral compaction technique. CONCLUSION: When there are metal posts or broken instruments in the root canal, the use of ultrasonic instruments is considered a safe method characterized by negligible tooth substance loss and minimal root damage causing fractures and perforations, and the entire procedure is effective and predictable. Non-surgical orthograde endodontic retreatment, when properly performed in accessible and penetrable root canals, achieves a high cure rate, good and lasting results and eliminates the need for radical procedures, such as apical surgery or tooth extraction. When nonsurgical endodontic retreatment is done, treated teeth must be restored by full coronal coverage as soon as possible, to prevent coronal leakage or fracture.
Assuntos
Tratamento do Canal Radicular/métodos , Adulto , Coroas , Feminino , Humanos , Pessoa de Meia-Idade , Técnica para Retentor Intrarradicular , RetratamentoRESUMO
INTRODUCTION: The aim of this one-year prospective clinical study was to evaluate the treatment results of compomer restorations (Dyract eXtral Dentsply/De Trey, Konstanz, Germany) with a single step self-etching dental adhesive (Xeno III Dentsply/De Trey, Konstanz, Germany) used for restoring class V lesions (non-carious and primary carious cervical lesions). MATERIAL AND METHODS: A total number of 62 class V restorations (n = 62) were placed by one dentist in 30 patients on incisors, canines and premolars. The fillings were placed due to different indications: non-carious cervical defects (n = 32) and primary carious lesions (n = 30). The restorations were evaluated by a single-blind design, according to the Modified United States Public Health Service system 6 and 12 months following the placement. The following were evaluated: retention, marginal integrity, marginal discoloration, wear; postoperative sensitivity and secondary caries. The statistical analysis compared the ratings of each criteria between materials using the Pearson chi-square or Fisher's exact test at a level of significance of 5% (p < 0.05). RESULTS: Two restorations of the non-carious lesion group were lost after 6 months, and after 12 months one restoration was lost in the group of primary carious lesions. There were no statistically significant differences between restorations for all evaluated criteria in both groups. CONCLUSION: The compomer restorations in combination with a single step self-etching dental adhesive showed acceptable clinical performance in Class V lesions after one year of clinical service.