Iodide manipulation using zinc additives for efficient perovskite solar minimodules.

Interstitial iodides are the most critical type of defects in perovskite solar cells that limits efficiency and stability. They can be generated during solution, film, and device processing, further accelerating degradation. Herein, we find that introducing a small amount of a zinc salt- zinc trifluoromethane sulfonate (Zn(OOSCF3)2) in the perovskite solution can control the iodide defects in resultant perovskites ink and films. CF3SOO̶ vigorously suppresses molecular iodine formation in the perovskites by reducing it to iodide. At the same time, zinc cations can precipitate excess iodide by forming a Zn-Amine complex so that the iodide interstitials in the resultant perovskite films can be suppressed. The perovskite films using these additives show improved photoluminescence quantum efficiency and reduce deep trap density, despite zinc cations reducing the perovskite grain size and iodide interstitials. The zinc additives facilitate the formation of more uniform perovskite films on large-area substrates (78-108 cm2) in the blade-coating process. Fabricated minimodules show power conversion efficiencies of 19.60% and 19.21% with aperture areas of 84 and 108 cm2, respectively, as certified by National Renewable Energy Laboratory (NREL), the highest efficiency certified for minimodules of these sizes.

Molecular Locking with All-Organic Surface Modifiers Enables Stable and Efficient Slot-Die-Coated Methyl-Ammonium-Free Perovskite Solar Modules.

The power conversion efficiency (PCE) of the state-of-the-art large-area slot-die-coated perovskite solar cells (PSCs) is now over 19%, but issues with their stability persist owing to significant intrinsic point defects and a mass of surface imperfections introduced during the fabrication process. Herein, the utilization of a hydrophobic all-organic salt is reported to modify the top surface of large-area slot-die-coated methylammonium (MA)-free halide perovskite layers. Bearing two molecules, each of which is endowed with anchoring groups capable of exhibiting secondary interactions with the perovskite surfaces, the organic salt acts as a molecular lock by effectively binding to both anion and cation vacancies, substantially enhancing the materials' intrinsic stability against different stimuli. It not only reduces the ingression of external species such as oxygen and moisture, but also suppresses the egress of volatile organic components during the thermal stability testing. The treated PSCs demonstrate efficiency of 19.28% (active area of 58.5 cm2 ) and 17.62% (aperture area of 64 cm2 ) for the corresponding mini-module. More importantly, unencapsulated slot-die-coated mini-modules incorporating the all-organic surface modifier show ≈80% efficiency retention after 7500 h (313 days) of storage under 30% relative humidity (RH). They also remarkably retain more than 90% of the initial efficiency for over 850 h while being measured continuously.

Blading of Conformal Electron-Transport Layers in p-i-n Perovskite Solar Cells.

Perovskite solar cells (PSCs) are promising to reduce the cost of photovoltaic system due to their low-cost raw materials and high-throughput solution process; however, fabrication of all the active layers in perovskite modules using a scalable solution process has not yet been demonstrated. Herein, the fabrication of highly efficient PSCs and modules in ambient conditions is reported, with all layers bladed except the metal electrode, by blading a 36 ± 9 nm-thick electron-transport layer (ETL) on perovskite films with a roughness of ≈80 nm. A combination of additives in phenyl-C61 -butyric acid methyl ester (PCBM) allows the PCBM to conformally cover the perovskites and still have a good electrical conductivity. Amine-functionalized molecules are added to enhance both the dispersity of PCBM and the affinity to perovskites. A PCBM dopant of 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) recovers the conductivity loss induced by the small amine molecules. PSCs (0.08 cm2 ) fabricated by the all-blading process reache an average efficiency of 22.4 ± 0.5% and a champion efficiency of 23.1% for perovskites with a bandgap of 1.51 eV, with much better stability compared to evaporated ETL PSCs. The all-bladed minimodule (25.03 cm2 ) shows an aperture efficiency of ≈19.3%, showing the good uniformity of the bladed ETLs.

Ni-Doped CsPbBr3 Perovskite: Synthesis of Highly Stable Nanocubes.

A nanocube of Ni-doped CsPbBr3nanocrystals (NCs) has been successfully synthesized and characterized by various spectroscopy techniques such as High-resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), etc. The optoelectronic properties of NCs have been investigated with different solvents. HR-TEM and FE-SEM reveal that the obtained Ni-doped CsPbBr3NCs exhibit cubic-rectangular morphologies with different sizes. Furthermore, the radiative exciton kinetics of NCs was examined using the time-correlated single photon counting (TCSPC) technique. The present study ravels that synthesized nanocubes are highly stable.

Molecular Engineering and Structure-Related Properties of Squaraine Dyes Based on the Core and Wings Concept.

Three new squaraine-based functional π-conjugated molecules were synthesized considering the core and wings concept. The molecules, SQ-DICN, SQ-DIEt-RH, and SQ-DICN-RH, were end-capped with three different wings, such as malononitrile, 2-(3-hexyl-4-oxothiazolidin-2-ylidene)malononitrile, and 3-ethyl-2-thioxothiazolidin-4-one. Among the three dyes, SQ-DICN-RH showed the highest molar extinction coefficient. The photoluminescence of all the dyes showed an opposite trend to that of the absorption maximum. The electrochemical results showed that the lowest unoccupied molecular orbital level of all the dyes ranged from -3.72 to -3.82 eV, whereas the highest occupied molecular orbital ranged from -4.89 to -4.94 eV. Solvatochromism was carried out to observe the effects of the solvent containing the dyes. The electronic structure of the dyes was examined using ab initio simulations. The dyes were characterized theoretically, and the red-shifted absorption of SQ-DICN-RH was explained and correlated with its biradicaloid character and singlet-triplet energy gap.