Osseous Maxillary Reconstruction with Immediate Dental Implant Placement: An Optimized Workflow for the Oncologic Patient.

INTRODUCTION: Maxillary reconstruction is a complex undertaking characterized by a 3-dimensional surgical site with deficiencies in multiple tissue types. Prior to virtual surgical planning(VSP), bony reconstruction was inaccurate and inefficient, thus reconstructions defaulted to soft tissue flaps or obturators. The current study describes an efficient and accurate approach to bony maxillary reconstruction with immediate dental implant placement(IDIP). METHODS: A reconstructive workflow was developed for osseous reconstruction to improve functional and aesthetic outcomes. Critical aspects include VSP, 3-D printed plates and IDIP. Review of a prospectively maintained database identified patients who underwent osseous maxillary reconstruction with a fibula flap and immediate dental implants from 2017-2022, with a focus on oncologic characteristics and reconstructive outcomes. RESULTS: During the study, 20 patients underwent maxillary reconstruction with VSP and IDIP. One dental implant out of 55 failed to osseointegrate and no flaps were lost. Three patients suffered partial loss of the fibula skin island; one required palatal closure with a radial forearm flap, and two were managed with outpatient debridement. Fifteen patients achieved either an interim or final retained dental prosthesis. All prostheses achieved acceptable aesthetic results without the instability associated with non-bone borne devices(e.g.dentures/obturators). No patients experienced delays in oncologic treatment. CONCLUSIONS: VSP technology has enabled surgeons to replace like with like to achieve better outcomes with acceptable morbidity for maxillary defects. IDIP provides all patients an opportunity for a fixed prosthesis even though not all complete the process. This maxillary reconstruction workflow can be safely accomplished in oncologic patients with promising and effective early results.

Rehabilitation of pediatric retinoblastoma patients with ocular prostheses and their subsequent modifications: A 15-year retrospective study.

PURPOSE: Enucleation is a common treatment modality performed for pediatric retinoblastoma patients, and the resultant defects are reconstructed using an ocular prosthesis. The prostheses are modified or replaced periodically, as the child develops due to orbital growth and patient-error. The purpose of this report is to evaluate the replacement frequency of prostheses in the pediatric oncologic population. METHODS: A retrospective review was completed by the two senior research investigators, of patients that had ocular prostheses fabricated following enucleation of their retinoblastoma from 2005 to 2019 (n = 90). Data collected from the medical records of the patient included the pathology, date of surgery, date of prosthesis delivery, and the replacement schedule of the ocular prosthesis. RESULTS: During the 15-year study period, 78 enucleated observations (ocular prosthesis fabricated) were included for analysis. The median age of the patients at the time of delivery of their first ocular prosthesis was calculated to be 2.6 years (range 0.3-18 years). The median time to the first modification of the prosthesis was calculated to be 6 months. The time to modification of the ocular prosthesis was further stratified by age. CONCLUSION: Pediatric patients require modification of their ocular prostheses throughout their growth and development period. Ocular prostheses are reliable prostheses with predictable outcomes. This data is helpful to set an expectation among the patient, parent, and provider.

Comparison of the weight of conventionally heat-processed hollow and solid obturators and 3D printed hollow obturators.

STATEMENT OF PROBLEM: The weight of larger obturators places increased stress on the supportive teeth and bearing tissue and allows gravity to act as a dislodging factor affecting the stability and retention of the prosthesis. However, whether conventionally processed and 3-dimensionally (3D) printed hollow obturators have similar reduced weights compared with solid obturators is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the weight difference between conventionally heat-processed complete denture obturators with and without hollowing and 3D printed obturators with a hollow bulb. MATERIAL AND METHODS: Obturators were fabricated as conventionally heat-processed solid obturators, conventionally heat-processed with a hollow obturator bulb, and 3D printed with a hollow obturator bulb. Nine obturator prostheses were fabricated for each type of Aramany Class I, Class II, and Class III defect. The weights of each of the 27 obturator prostheses were measured, and a statistical analysis was performed with exact versions of the Kruskal-Wallis test or Wilcoxon Rank Sum test (α=.05). RESULTS: Conventionally heat-processed solid obturators were significantly heavier than the conventionally heat-processed hollow (P<.001) or the 3D printed hollow obturators (P<.001). No significant difference (P=.222) was found between the conventionally heat-processed hollow and 3D printed hollow obturators. The decrease in weight was proportional to the size of the defect with the Aramany Class I defect having the largest differences in weight between the different fabrication methods, followed by Class II, and then Class III with a much smaller defect. CONCLUSIONS: Additive manufacturing could be a suitable alternative to conventional techniques for the fabrication of a closed hollow obturator because of the comparable weights.

Making the Case for Virtual Surgical Planning: Bilateral Sequential Fibula Flaps with Immediate Dental Implants for Maxillectomy.

SUMMARY: Oncologic maxillectomy defects requiring bony reconstruction are among the most challenging head and neck cases because of the complex three-dimensional geometry of the midface. Virtual surgical planning technology is advantageous in these cases because it provides superior positional precision and accuracy compared with traditional techniques and facilitates prosthodontic rehabilitation. Maxillary cancer recurrence after an initial fibula flap reconstruction presents a unique challenge. The authors report the first two cases of sequential fibula flaps after second or recurrent cancer of the maxilla. Virtual surgical planning facilitated resection with adequate tumor margins, optimized anatomic positioning of the fibula construct with three-dimensional printed plates, and enabled immediate functional dental implant placement.

Osteoradionecrosis of the Jaw Following Proton Radiation Therapy for Patients With Head and Neck Cancer.

Importance: Proton radiation therapy (PRT) has reduced radiation-induced toxic effects, such as mucositis and xerostomia, over conventional photon radiation therapy, leading to significantly improved quality of life in patients with head and neck cancers. However, the prevalence of osteoradionecrosis (ORN) of the jaw following PRT in these patients is less clear. Objective: To report the prevalence and clinical characteristics of ORN in patients with oral and oropharyngeal cancer (OOPC) treated with PRT. Design, Setting, and Participants: This case series reports a single-institution experience (Memorial Sloan Kettering Cancer Center, New York, New York) between November 2013 and September 2019 and included 122 radiation therapy-naive patients with OOPC treated with PRT. Data were analyzed from 2013 to 2019. Main Outcomes and Measures: Clinical parameters, including sex, age, comorbidities, tumor histology, concurrent chemotherapy, smoking, comorbidities, and preradiation dental evaluation, were obtained from the medical record. Patients with clinical or radiographic signs of ORN were identified and graded using the adopted modified Glanzmann and Grätz grading system. Characteristics of ORN, such as location, clinical presentation, initial stage at diagnosis, etiology, time to diagnosis, management, and clinical outcome at the last follow-up, were also collected. Results: Of the 122 patients (mean [SD] age, 63 [13] years; 45 [36.9%] women and 77 [63.1%] men) included in this study, 13 (10.6%) developed ORN following PRT during a median (range) follow-up time of 40.6 (<1-101) months. All patients had spontaneous development of ORN. At the time of initial diagnosis, grade 0, grade 1, grade 2, and grade 3 ORN were seen in 2, 1, 9, and 1 patient, respectively. The posterior ipsilateral mandible within the radiation field that received the full planned PRT dose was the most involved ORN site. At a median (range) follow-up of 13.5 (0.2-58.0) months from the time of ORN diagnosis, complete resolution, stable condition, and progression of ORN were seen in 3, 6, and 4 patients, respectively. The 3-year rates of ORN and death in the total cohort were 5.2% and 21.5%, while the 5-year rates of ORN and death were 11.5% and 34.4%, respectively. Conclusions and Relevance: In this case series, the prevalence of ORN following PRT was found to be 10.6%, indicating that ORN remains a clinical challenge even in the era of highly conformal PRT. Clinicians treating patients with OOPC with PRT should be mindful of this complication.

Orbital Exenteration and Brachytherapy for the Treatment of Pediatric, Fusion-positive, Recurrent Rhabdomyosarcoma.

A 20-month-old boy presented with biopsy-proven recurrent alveolar rhabdomyosarcoma without metastasis. He was previously treated with multiagent chemotherapy and external beam irradiation showing a complete response. Upon relapse, he was treated with chemotherapy, orbital exenteration, and brachytherapy. Customized, intraoperative brachytherapy has potential to limit the sequelae associated with radiation adjuvant therapy.

Combination intraoral radiation mouthguard-positioning stent.

The sequelae of head-and-neck radiation may include hyposalivation, dysgeusia, trismus, mucositis, and osteoradionecrosis. A mouthguard used during radiation therapy can mitigate the effects of backscatter radiation from dental restorations. In addition, an intraoral positioning stent can assist in repositioning oral structures, such as the tongue, away from the field of radiation during treatment, thereby limiting dose delivery. The purpose of this article is to provide a technique to fabricate a combination prosthesis, which functions to reposition oral structures as well as mitigate the effects of backscatter from dental restorations during head-and-neck radiation therapy.

Osteoradionecrosis of the jaw: A mini review.

Osteoradionecrosis (ORN) of the jaw is one of the most dreaded complications of head and neck radiation therapy. Despite the evolution of radiation treatment modalities, ORN continues to remain a therapeutic challenge and its etiopathogenesis still remains unclear. It is clinically characterized by exposed necrotic bone within the head and neck radiation field. Over the past years, several studies have reported on the definition, staging, incidence, etiology, and management of this oral complication. In this review, we summarize the literature on ORN and discuss our institutional experience and management strategies that aim to predict and mitigate risk for ORN.

Intraoral radiation stents-Primer for clinical use in head and neck cancer therapy.

Intraoral radiation stents (IRS) are prosthetic devices that assist in the effective delivery of radiation to tumor tissues and aim to avoid unnecessary radiation to adjacent healthy tissues, thus limiting postradiotherapy toxicities. They are used to protect or displace vital structures, assist in positioning of the treatment beam for effective administration of radiotherapy, carry a radioactive material, shield healthy tissues of the oral cavity, and/or maintain the desired mouth opening during radiotherapy. With close collaboration between radiation oncologist and oral health care provider, several IRS can be fabricated by the latter for appropriate targeting and delivery of planned radiation dose and optimized treatment results. Modification of these IRS based on individual patient need is recommended to maximize prosthesis utility. The purpose of this review is to discuss the various types of IRS and highlight their clinical utility and benefits in patients receiving radiation therapy in the head and neck cancers.

Dental status and risk of odontogenic complication in patients undergoing hematopoietic stem cell transplant.

PURPOSE: Dental evaluation and management prior to hematopoietic stem cell transplant (HSCT) plays a vital role in identifying and treating infections that may be life-threatening. The purpose of this study is to describe the dental management of patients undergoing pre-HSCT examination with the Dental Service at Memorial Sloan Kettering Cancer Center (MSKCC) and to report on odontogenic complications. METHODS: Patients referred for evaluation as part of the standard preparation for HSCT were included. Following clinical and radiological examination, patients were assigned to one of three groups based on risk of odontogenic infection, and treatment was provided as indicated. Patients were followed, and their medical records were reviewed for odontogenic complications during the transplant admission. RESULTS: Of the 375 patients evaluated, 350 patients underwent HSCT: allogeneic 143 (40.9%) and autologous 207 (59.1%). The distribution of primary cancer diagnosis was as follows: multiple myeloma 104 (29.7%), leukemias 95 (27.1%), Hodgkin's lymphoma 28 (8.0%), non-Hodgkin's Lymphoma 99 (28.3%), and other conditions 24 (6.9%). The median time from dental evaluation to transplant was 29 days. The median Decayed, Missing, Filled Teeth Index was 17. The median Community Periodontal Index was 1. Based on dental status, 145 patients (41.4%) were classified as low risk, 133 (38%) as moderate risk and 72 (20.6%) as high risk of odontogenic infection. One hundred fourteen patients (32.6%) required dental treatment prior to HSCT, and 100 of these (28.6%) completed treatment. Two (0.57%) patients had odontogenic complications. CONCLUSIONS: With conservative pre-HSCT dental treatment based on an infection risk classification system, a low odontogenic complication rate was observed.

Interim Implant-Supported Resection Prosthesis Following Fibula Free Flap Reconstruction of the Arch with Immediate Implants: A Novel Approach for the Oncologic Patient.

Oral cancer treatment involving the maxilla and/or mandible often results in esthetic and functional deficits that can diminish the patient's quality of life. As a result, expeditious reconstruction of the defect and dental rehabilitation is desirable. Dental rehabilitation shortly after reconstruction with an osteocutaneous free flap and resection prosthesis is a persistent challenge for patients with oncologic defects where immediate dental rehabilitation is not a possibility. Additionally, conventional prosthesis fabrication techniques are impractical or impossible due to postoperative anatomical changes and limitations in clinical armamentarium. To address these limitations, a technique and a novel implant-supported prosthetic workflow for the oncologic patient were developed to provide interim dental rehabilitation for such clinical situations. This article describes the prosthesis fabrication technique, reports short-term outcomes, and evaluates patient-reported quality-of-life outcomes using the FACE-Q Head and Neck Cancer Module.

Three-dimensional printed definitive cast for a silicone obturator prosthesis: A clinical report.

For patients with head and neck cancer requiring a maxillectomy, obturator prostheses help with quality of life. These patients routinely require adjuvant oncologic treatments with significant adverse effects. Treatment sequelae can leave patients with difficulty speaking and swallowing, reduced salivary function, reduction in maximal incisal opening, and at risk of osteoradionecrosis. A 55-year-old African-American woman presented with significant trismus and reduction in maximal incisal opening after treatment for squamous cell carcinoma of the left maxillary sinus. She had received a left total maxillectomy with adjuvant chemotherapy and radiation treatments. With her reduced opening, she was no longer able to insert her interim obturator prosthesis, which caused difficulty speaking and nasal regurgitation. A cone beam computed tomography scan was made of the patient's maxillectomy defect. From the Digital Imaging and Communications in Medicine file, a definitive cast was 3-dimensionally printed to fabricate a flexible silicone obturator prosthesis. This treatment has allowed the patient to return to a functional quality of life and could help other patients in similar situations.

Fabrication of a custom brachytherapy appliance.

This article reviews the prosthodontic and laboratory steps in the fabrication of a custom brachytherapy appliance. This technique is described through the treatment of a patient with recurrent orbital rhabdomyosarcoma. After a non-eyelid-sparing orbital exenteration of a 7-year-old boy, an impression of the orbital defect was captured to fabricate a custom brachytherapy appliance with mock catheters. One week later, the prosthesis was placed in the orbit, and the device was loaded with radiation catheters to deliver targeted radiation. The prosthesis was secured with Velcro straps fitted into slots made in the prosthesis and wrapped around the back of the patient's head. Brachytherapy appliances have been used to provide effective therapy for patients receiving care at Memorial Sloan Kettering Cancer Center.

Restoration of Facial Form and Lip Competence in a Patient with a Midfacial Defect.

Squamous cell carcinoma (SCC) of the head and neck can be treated with a combination of modalities. There is an esthetic and functional compromise with midfacial defects secondary to ablative surgery and adjuvant therapies for SCC. Osteoradionecrosis, tissue contracture, and trismus, are all negative side effects of treatment and can impact a patient's function and possibly their nutrition. In this report, we describe a procedure for fabrication of a prosthesis that provides cosmetic improvement and labial competence to maintain caloric intake.

The prevalence and risk factors associated with osteoradionecrosis of the jaw in oral and oropharyngeal cancer patients treated with intensity-modulated radiation therapy (IMRT): The Memorial Sloan Kettering Cancer Center experience.

OBJECTIVE: To determine the prevalence and correlation of various risk factors [radiation dose, periodontal status, alcohol and smoking] to the development of osteoradionecrosis (ORN). PATIENTS AND METHODS: The records of 1023 patients treated with IMRT for oral cavity cancer (OCC) and oropharyngeal cancer (OPC) between 2004 and 2013 were retrospectively reviewed to identify patients who developed ORN. Fisher exact tests were used to analyze patient characteristics between ORN patients with OCC and OPC. Paired Wilcoxon tests were used to compare the dose volumes to the ORN and contralateral non-ORN sites. To evaluate an association between ORN and risk factors, a case-control comparison was performed. One to 2 ORN-free patients were selected to match each ORN patient by gender, tumor site and size. General estimation equations models were used to compare the risk factors in ORN cases and matched controls. RESULTS: 44 (4.3%) patients developed ORN during a median follow-up time of 52.5months. In 82% of patients, ORN occurred spontaneously. Patients with OPC are prone to develop ORN earlier compared to patients with OCC (P=0.03). OPC patients received a higher Dmax compared to OCC patients (P=0.01). In the matched case-control analysis the significant risk factors on univariate analysis were poor periodontal status, history of alcohol use and radiation dose (P=0.03, 0.002 and 0.009, respectively) and on multivariate analysis were alcohol use and radiation dose (P=0.004 and 0.026, respectively). CONCLUSION: In our study, higher radiation dose, poor periodontal status and alcohol use are significantly related to the risk of developing ORN.

Metastatic solid tumors to the jaw and oral soft tissue: A retrospective clinical analysis of 44 patients from a single institution.

PURPOSE: Metastatic solid tumors to the oral cavity are rare, frequently indicative of an end-stage disease process, and associated with poor survival rates. We performed a 20-year retrospective clinical analysis of our institution's cases of solid metastases to the oral cavity, and investigated these patients' clinical outcomes. MATERIAL AND METHODS: A retrospective study of patients with metastatic solid tumors to the oral cavity over a 20-year period (October 1996 to September 2015) was conducted at Memorial Sloan Kettering Cancer Center. Patients were selected if they had a histopathologically confirmed diagnosis. Demographic, pathologic, and clinical information were reviewed to identify patient outcomes. RESULTS: A total of 44 patients with metastatic non-melanocytic non-hematopoietic tumor to the oral cavity were identified: 24 males and 20 females (39 adults and 5 children) with a mean age of 54.3 years. In all, 24 cases involved the jaw and 20 cases involved the oral soft tissue. Eight patients (18.2%) had oral cavity metastases as the first indication of an occult malignancy. In adult patients, the common primary sites were the lungs (n = 9, 20%), kidney (n = 7, 16%), breast (n = 5, 11%), and colon (n = 4, 9%); and in pediatric patients the adrenal gland (3/5) was the most common site. Of the adult patients, 33 (84.6%) died of disease. From the time of metastasis diagnosis, patients with jaw metastases had a median and mean survival of 12 months and 27.7 months, respectively. In comparison, patients with oral soft tissue metastases had a median survival time of 5 months, and mean of 8 months. One pediatric patient (20%) died of disease 8 months after metastasis diagnosis. CONCLUSION: Metastatic solid tumors to the oral cavity can be the first sign of a malignancy. Pediatric patients with oral cavity metastases have a better prognosis compared to adult patients. In this series, adults with oral soft tissue involvement had shorter survival times compared to patients with jaw involvement.