Fucoidan loaded PVA/Dextran blend electrospun nanofibers for the effective wound healing.

Chronic wounds have become a serious global health issue. In this study, we investigated the effect of increasing fucoidan (FD) concentration on the characteristics of nanofibers and their wound healing potential at in vitro as well as in vivo level. The results showed that increasing FD content (0.25 to 1 %) led to an significant increase in nanofiber diameter (487.7 ± 125.39 to 627.9 ± 149.78 nm), entrapment efficiency (64.26 ± 2.6 to 94.9 ± 3.1 %), and water uptake abilities (436.5 ± 1.2 to 679.7 ± 11.3 %). However, the in vitro biodegradation profile decreased with an increase in FD concentration. Water vapor transmission rate analysis showed that it was within the standard range for all FD concentrations. Nanofibers with 1 % PVA/DX/FD exhibited slow-release behavior, suggesting prolonged FD availability at the wound site. In vivo studies in rats with full-thickness wounds demonstrated that applying 1 % FD-enriched PVA/DEX nanofibers significantly (p < 0.0001) improved mean wound area closure. These findings suggest that FD-enriched nanofibers have immense potential as a wound dressing material in future if explored further.

Diester Prodrugs of a Phosphonate Butyrophilin Ligand Display Improved Cell Potency, Plasma Stability, and Payload Internalization.

Activation of Vγ9Vδ2 T cells with butyrophilin 3A1 (BTN3A1) agonists such as (E)-4-hydroxy-3-methyl-but-2-enyl diphosphate (HMBPP) has the potential to boost the immune response. Because HMBPP is highly charged and metabolically unstable, prodrugs may be needed to overcome these liabilities, but the prodrugs themselves may be limited by slow payload release or low plasma stability. To identify effective prodrug forms of a phosphonate agonist of BTN3A1, we have prepared a set of diesters bearing one aryl and one acyloxymethyl group. The compounds were evaluated for their ability to stimulate Vγ9Vδ2 T cell proliferation, increase production of interferon γ, resist plasma metabolism, and internalize into leukemia cells. These bioassays have revealed that varied aryl and acyloxymethyl groups can decouple plasma and cellular metabolism and have a significant impact on bioactivity (>200-fold range) and stability (>10 fold range), including some with subnanomolar potency. Our findings increase the understanding of the structure-activity relationships of mixed aryl/acyloxymethyl phosphonate prodrugs.

Sialic Acid Engineered Prodrug Nanoparticles for Codelivery of Bortezomib and Selenium in Tumor Bearing Mice.

Most cancer patients rarely benefit from monodrug therapy because of both cancer complexity and tumor environment. One of the main reasons for this failure is insufficient accumulation of the optimal dose at the tumorous site. Our investigation implies a promising strategy to engineer prodrug nanoparticles (NPs) of bortezomib (BTZ) and selenium (Se) using sialic acid (SAL) as a ligand to improve breast cancer therapy. BTZ was conjugated with SAL and HPMA (N-2-hydroxypropyl methacrylamide) to prepare a prodrug conjugate; BTZ-SAL-HPMA (BSAL-HP) and then fabricated into prodrug NPs with Se (Se_BSAL-HP prodrug NPs). The self-assembly of prodrug NPs functionalized with Se showed size (204.13 ± 0.02 nm) and zeta potential (-31.0 ± 0.11 mV) in dynamic light scattering (DLS) experiments and spherical shape in TEM and SEM analysis. Good stability and low pH drug release profile were characterized by Se_BSAL-HP prodrug NPs. The tumor-selective boronate-ester-based prodrug NPs of BTZ in combination with Se endowed a synergistic effect against cancer cells. Compared to prodrug conjugate, Se_BSAL-HP prodrug NPs exhibited higher cell cytotoxicity and enhanced cellular internalization with significant changes in mitochondria membrane potential (MMP). Elevated apoptosis was observed in the (G2/M) phase of the cell cycle for Se_BSAL-HP prodrug NPs (2.7-fold) higher than BTZ. In vivo studies were performed on Sprague-Dawley rats and resulted in positive trends. The increased therapeutic activity of Se_BSAL-HP prodrug NPs inhibited primary tumor growth and showed 43.05 fold decrease in tumor volume than the control in 4T1 tumor bearing mice. The surprising and remarkable outcomes for Se_BSAL-HP prodrug NPs were probably due to the ROS triggering effect of boronate ester and selenium given together.

Pre-treatment but not co-treatment with vitexin alleviates hyperthermia induced oxidative stress and inflammation in buffalo mammary epithelial cells.

This study investigated if in vitro supplementation of vitexin could mitigate the adverse effects of hyperthermia on buffalo mammary epithelial cells (BuMECs). Immortalized BuMECs were divided into seven groups (n = 3): (1) a negative control group at 37 °C; (2) BuMECs exposed to heat stress as a positive control at 42 °C for 1 h; (3-7) heat stressed BuMECs pre-treated or co-treated with different concentrations of vitexin (5 µM, 10 µM, 20 µM, 50 µM, and 100 µM), respectively. Hyperthermia was induced by exposing the cells to 42 ºC for 1 h. For the pre-treatment experiment, BuMECs were treated with vitexin for 2 h before hyperthermia exposure. For co-treatment, vitexin was added simultaneously with hyperthermia for 1 h. Subsequently, the cells were allowed to recover for 12 h at 37 °C. Results showed that pre-treatment with vitexin was more effective than co-treatment in protecting BuMECs from hyperthermia in a dose-dependent manner, with higher concentrations (50 µM and 100 µM) being the most effective. Pre-treatment with vitexin maintained cellular viability and prevented inflammation by inducing the expression of the anti-apoptotic gene (BCL-2) and reducing the expression of the pro-apoptotic gene (Bax) and pro-inflammatory mediators (IL-1ß, IL-6) in heat-stressed BuMECs. Pre-treatment with vitexin reduced oxidative stress and induced thermotolerance by increasing the expression of antioxidants mediators such as SOD, GPx and CAT at mRNA and protein levels, and modulating the expression of heat shock proteins. The findings suggest that vitexin has the potential as a therapeutic agent to protect the mammary gland from the negative impact of hyperthermia in dairy cows.

N-2-Hydroxypropylmethacrylamide-Polycaprolactone Polymeric Micelles in Co-delivery of Proteasome Inhibitor and Polyphenol: Exploration of Synergism or Antagonism.

Breast cancer leads to the highest mortality among women resulting in a major clinical burden. Multidrug therapy is more efficient in such patients compared to monodrug therapy. Simultaneous combinatorial or co-delivery garnered significant interest in the past years. Caffeic acid (CFA) (a natural polyphenol) has received growing attention because of its anticarcinogenic and antioxidant potential. Bortezomib (BTZ) is a proteasome inhibitor and may be explored for treating breast cancer. Despite its high anticancer activity, the low water solubility and chemical instability restrict its efficacy against solid tumors. In the present study, we designed and investigated a HP-PCL (N-2-hydroxypropylmethacrylamide-polycaprolactone) polymeric micellar (PMCs) system for the simultaneous delivery of BTZ and CFA in the treatment of breast cancer. The designed BTZ+CFA-HP-PCL PMCs were fabricated, optimized, and characterized for size, zeta potential, surface morphology, and in vitro drug release. Developed nanosized (174.6 ± 0.24 nm) PMCs showed enhanced cellular internalization and cell cytotoxicity in both MCF-7 and MDA-MB-231 cells. ROS (reactive oxygen species) levels were highest in BTZ-HP-PCL PMCs, while CFA-HP-PCL PMCs significantly (p < 0.001) scavenged the ROS generated in 2',7'-dichlorofluorescein diacetate (DCFH-DA) assay. The mitochondrial membrane potential (MMP) assay revealed intense and significant green fluorescence in both types of cancer cells when treated with BTZ-HP-PCL PMCs (p < 0.001) indicating apoptosis or cell death. The pharmacokinetic studies revealed that BTZ-HP-PCL PMCs and BTZ+CFA-HP-PCL PMCs exhibited the highest bioavailability, enhanced plasma half-life, decreased volume of distribution, and lower clearance rate than the pure combination of drugs. In the organ biodistribution studies, the combination of BTZ+CFA showed higher distribution in the spleen and the heart. Overall findings of in vitro studies surprisingly resulted in better therapeutic efficiency of BTZ-HP-PCL PMCs than BTZ+CFA-HP-PCL PMCs. However, the in vivo tumor growth inhibition study performed in tumor-induced mice concluded that the tumor growth was inhibited by both BTZ-HP-PCL PMCs and BTZ+CFA-HP-PCL PMCs (p < 0.0001) more efficiently than pure BTZ and the combination (BTZ+CFA), which may be due to the conversion of boronate ester into boronic acid. Henceforth, the combination of BTZ and CFA provides further indications to be explored in the future to support the hypothesis that BTZ may work with polyphenol (CFA) in the acidic environment of the tumor.

Curcumin induces thermotolerance by reducing oxidative stress, apoptosis, and inflammation in buffalo mammary epithelial cells under heat shock conditions.

The epithelial cell is the main basic unit of the udder in which milk synthesis takes place. Curcumin is well known for its antioxidant, anti-apoptotic, and anti- inflammatory properties. The present study was performed to test whether in vitro curcumin supplementation can alleviate the unfavorable impact of hyperthermia on buffalo mammary epithelial cells (BuMECs). The spontaneously immortalized BuMECs were divided into 7 groups (n = 9); 1) unstressed BuMECs (negative control, 37 °C); 2) BuMECs exposed to hyperthermia without curcumin treatment (positive control); 3-7) BuMECs cultured with different concentrations of curcumin (5, 10, 20, 40 and 60 µM), respectively, followed by hyperthermic exposure (42ºC) for 1 h and then returned to 37ºC. Changes in viability (MTT assay), proliferation (BrdU colorimetric immunoassay) and concentrations of antioxidant enzymes, CAT, and SOD (ELISA) of BuMECs were recorded. The gene expression study was performed using qRT-PCR. Lower concentrations of curcumin (5, 10 µM) maintained viability, enhanced proliferation, and content of antioxidant enzymes of heat stressed BuMECs. Curcumin induced thermotolerance and antioxidant status by upregulating the expression of antioxidants genes, anti-apoptotic genes and heat shock proteins in heat stressed BuMECs compared to the positive control group. Besides, curcumin reduced apoptosis and inflammation in BuMECs exposed to hyperthermia by downregulating the expression of genes and transcriptional factors associated with apoptosis and inflammatory immune response. The results reveal the potential roles of curcumin in eliminating the negative impact of hyperthermia on BuMECs by regulating the pathways of apoptosis, inflammation, and oxidative stress.

Polymeric Nanoparticles: A Holistic Approach to Combat Tuberculosis.

The emergence of multidrug-resistant (MDR) and extremely drug resistant (XDR) forms of pulmonary tuberculosis (TB) remains a major health challenge in this advanced era of health science. The longer therapy and higher dose of anti-tubercular drugs (ATDs) increases the patient incompliance at its peak levels of intolerance as well as toxicity. In the recent decades, nanoparticulate drug delivery has emerged as an excellent venture for the effective treatment of cancer, infectious diseases, brain as well as TB. Currently, encapsulation and conjugation of therapeutics to polymeric nanoparticles (PNPs) is an attractive strategy to enhance the effectivity of chemotherapeutics and minimize the toxic effects associated with ATDs. Various characteristics of nanoparticles (NPs) such as high stability, high loading efficiency, and high carrying capacity gives preference to the NPs over other drug delivery systems. Multiple or dual drug delivery concept is continuously gaining attention as a strict and favourable requirement of anti-TB therapy. The ideal properties of NPs including controlled or sustained drug release from the matrix enhances drug bioavailability with dose reduction and also enhance compliance of TB patients. Natural and synthetic polymers are playing important role in curtailing the side effects of chemotherapeutics. This review extensively highlights the drug delivery approaches of ATDs and emphasized on the importance and application of PNPs to combat TB.

Sialic Acid Conjugated Chitosan Nanoparticles: Modulation to Target Tumour Cells and Therapeutic Opportunities.

Targeted delivery of therapeutics forestalls the dreadful delocalized effects, drug toxicities and needless immunosuppression. Cancer cells are bounteous with sialic acid and the differential expression of glycosyl transferase, glycosidase and monosaccharide transporter compared to healthy tissues. The current study entails the development and characterisation of sialic acid (SA)-labelled chitosan nanoparticles encapsulating gemcitabine (GEM). Chitosan (CS) was conjugated with SA using coupling reaction and characterised spectroscopically. Furthermore, different concentrations of chitosan and tripolyphosphate (TPP) were optimised to fabricate surface modified chitosan nanoparticles. SA conjugated chitosan nanoparticles encapsulating GEM (SA-CS_GEM NPs) of 232 ± 9.69 nm with narrow distribution (PDI < 0.5) and zeta potential of - 19 ± 0.97 mV was fabricated. GEM was successfully loaded in the SA-CS NPs, depicting prolonged and biphasic drug release pattern more elated at low pH. Pronounced cellular uptake (FITC tagged) and cytotoxicity (IC50 487.4 nM) was observed in SA-CS_GEM NPs against A549 cells. IC50 for SA-CS_GEM NPs plunged with an increase in the time points from 24 to 72 h. Concentration-dependent haemolytic study confirmed significant haemocompatibility of SA-CS_GEM NPs. Pharmacokinetic study was performed on Sprague-Dawley rats and the kinetic parameters were calculated using PKSolver 2.0. Results demonstrated a consequential refinement of 2.98 times in modified SA-CS_GEM NPs with a significant increase in retention time, bioavailability and elimination half-life, and decrease in elimination rate constant and volume of distribution in comparison to CS_GEM NPs. Therefore, SA-CS shell core nanoparticles could be a beneficial approach to target and treat NSCLC (non-small cell lung cancer) and direct for research possibilities to target the other tumour cells.

Synthesis, Morphology, and Rheological Evaluation of HPMA (N-2-Hydroxypropyl Methacrylamide)-PCL (Polycaprolactone) Conjugates.

The design, synthesis, and physicochemical characterization of conjugates are arduous and tedious processes. Several synthetic pathways for polymeric conjugation have been reported; however, conjugation through monomers with suitable reaction conditions can be a simple and robust approach. In the present study, three different conjugates of hydrophilic N-2-hydroxypropyl methacrylamide (HPMA) and hydrophobic polycaprolactone (PCL) were synthesized. The followed synthetic pathway not only was simple and robust but also reduced the overall synthetic steps as well as harsh reaction conditions significantly. In a nutshell, three conjugates, i.e., N-2-hydroxypropyl methacrylamide and polycaprolactone (HP-PCL), n-butanol-polycaprolactone-N-2-hydroxypropyl methacrylamide (nBu-PCL-HP), and isoamyl alcohol-polycaprolactone-N-2-hydroxypropyl methacrylamide (ISAL-PCL-HP), were synthesized through this simple synthetic strategy following the monomer conjugation approach along with exhaustive spectroscopic and rheological characterization. The conjugates HP-PCL, nBu-PCL-HP, and ISAL-PCL-HP were characterized by Fourier transform infrared (FT-IR) and NMR (13C and 1H) spectroscopies. The size and ζ potential of conjugates were determined through the dynamic light scattering (DLS) method. The nBu-PCL-HP conjugate displayed a hexagonal-like shape, as evidenced by scanning electron microscopy (SEM) with an obtained size of 237.9 ± 0.21 nm. X-ray diffraction (XRD) analysis proved the crystalline nature of nBu-PCL-HP conjugates. The results of smartly synthesized conjugates intrigued us to study their flow properties in detail. Rheological evaluation resulted in their non-Newtonian type of flow with the best-fit behavior for all of the conjugates followed as per the Herschel-Bulkley and power-law models applied herein. Conclusively, the synthesized HPMA and PCL conjugates may have applications in the preparation of blends, fibers, etc. in the future. The study portrayed that the explored synthetic scheme using monomers and initiators could be a suitable approach for the synthesis of HPMA and PCL conjugates.

Immunoproteomic analysis of Clostridium botulinum type B secretome for identification of immunogenic proteins against botulism.

OBJECTIVES: To identify immunogenic proteins of C. botulinum type B secretome by immunoproteomic analysis. RESULTS: In the present study, an attempt was made to elucidate the vaccine candidates/diagnostic molecules against botulism using immuno proteomic approach. C. botulinum type B secretome was elucidated when it was grown in TPGY as well as CMM media. Predominant 51 proteins were identified in both the media using 2-DE and mass spectrometry analysis. 2D gels (CMM & TPGY) were probed with respected proteins mice antiserum and obtained 17 and 10 immunogenic proteins in TPGY as well as CMM media respectively. Hypothetical protein CLOSPO_00563, ornithine carbamoyl transferase, FlaA, molecular chaperone GroEL and secreted protease proteins were found as the common immuno dominant proteins in both media. Polyclonal Antibodies raised against C. botulinum types A and E showed cross-reactivity with secretome C. botulinum type B at the lowest dilution (1:1000) but did not show cross reactivity with highest dilution (1:30,000) with C. botulinum type B secretome. Polyclonal antibodies against C. botulinum type F secretome did not show cross reactivity with C. botulinum type B secretome. CONCLUSIONS: Identified immunogenic proteins can be used as vaccine candidates and diagnostic markers for the infant and wound botulism but common immunogenic proteins may be the best vaccine candidate molecule for development of vaccine as well as diagnostic system against the infant and wound botulism.

PEGylated Dendrimer Mediated Delivery of Bortezomib: Drug Conjugation versus Encapsulation.

Poor aqueous solubility of anticancer drug bortezomib (BTZ) still remains a major challenge in the development of a successful formulation. The dendrimeric platform can provide a better opportunity to deliver BTZ with improved solubility. BTZ encapsulated in PEGylated PAMAM dendrimers (BTZ-PEG-PAMAM) was characterized and evaluated comparatively with encapsulated and conjugated dendritic formulations. The particle size of BTZ-PEG-PAMAM was 188.6 ± 4.17 nm, with entrapment efficiency of 78.61 ± 2.91% and drug loading of 39.30 ± 1.98%. The aqueous solubility of BTZ in PAMAM-PEG conjugate was enhanced by 68.11 folds in comparison to pure drug. In vitro drug release profile was found to be sustained up to 72 h. A comparative colorimetric MTT assay against A549 and MCF-7 cancer cells resulted in maximum efficacy from BTZ-PEG-PAMAM with IC50 value 333.14 ± 15.42 and 152.60 ± 24.56 nM, respectively. Significantly higher cellular internalization was observed in FITC tagged BTZ-PEG-PAMAM. In vivo pharmacokinetic study performed on Sprague Dawley rats resulted in 8.63 folds increase in bioavailability for BTZ-PEG-PAMAM than pure drug. Pharmacokinetic parameters of BTZ-PEG-PAMAM were better and improved over BTZ and other dendritic formulations. In conclusion, the prepared formulation of BTZ-PEG-PAMAM has given significant outcome and this strategy may be further explored for better delivery of BTZ in future.

HPMA-based polymeric conjugates in anticancer therapeutics.

Polymer therapeutics has gained prominence due to an attractive structural polymer chemistry and its applications in diseases therapy. In this review, we discussed the development and capabilities of N-(2-hydroxypropyl) methacrylamide (HPMA) and HPMA-drug conjugates in cancer therapy. The design, architecture, and structural properties of HPMA make it a versatile system for the synthesis of polymeric conjugations for biomedical applications. Research suggests that HPMA could be a possible alternative for polymers such polyethylene glycol (PEG) in biomedical applications. Although numerous clinical trials of HPMA-drug conjugates are ongoing, yet no product has been successfully brought to the market. Thus, further research is required to develop HPMA-drug conjugates as successful cancer therapeutics.

Biotinylated HPMA centered polymeric nanoparticles for Bortezomib delivery.

Bortezomib (BTZ) is a proteasome inhibitor as approved by US FDA for the treatment of multiple myeloma. It exhibits significant anti-cancer properties, against solid tumors; but lacks aqueous solubility, chemical stability which hinders its successful formulation development. The present study is an attempt to deliver BTZ using N-(2-hydroxypropyl) methacrylamide (HPMA) based copolymeric conjugates and biotinylated PNPs in an effective manner. Study describes a systematic synthetic pathway to synthesize functional polymeric conjugates such as HPMA-Biotin (HP-BT) HPMA-Polylactic acid (HPLA) and HPMA-PLA-Biotin (HPLA-BT) followed by exhaustive characterization both spectroscopically and microscopically. Our strategy yielded polymeric nanoparticles (PNPs) of narrow size range of 199.7 ± 1.32 nm. Release studies were performed at pH 7.4 and 5.6. PNPs were 2-folds less hemolytic (p < 0.0001) than pure drug. BTZ loaded PNPs of HPLA-BT demonstrated significant anti-cancer activity against MCF-7 cells. IC50 value of these PNPs was 56.06 ± 0.12 nM, which was approximately two folds less than BTZ (p < 0.0001). Cellular uptake study confirmed that higher uptake of formulations might be an outcome of biotin surface tethering characteristics that enhanced selectivity and targeting of formulations efficiently. In vivo pharmacokinetics evidenced increased bioavailability (AUC0 t-∞) of DL-HPLA-BT PNPs (drug loaded) than BTZ with an improved half-life. Overall the developed PNPs led to the improved and effective BTZ delivery.

Glycine-Poly-L-Lactic Acid Copolymeric Nanoparticles for the Efficient Delivery of Bortezomib.

PURPOSE: Bortezomib (BTZ) is a proteasome inhibitor used for multiple myeloma and mantle cell lymphoma treatment. BTZ's aqueous in solubility is the main hindrance in its successful development as a commercial formulation. The main objective of the present study is to develop and characterize folic acid-glycine-poly-L-lactic acid (FA-Gly4-PLA) based nanoformulation (NPs) to improve solubility and efficacy of BTZ. METHODS: BTZ loaded FA-Gly4-PLA NPs were prepared and characterized for size, zeta potential, in vitro studies such as release, kinetics modeling, hemolytic toxicity, and cell line-based studies (Reactive Oxygen Species: ROS and cytotoxicity). RESULTS: BTZ loaded NPs (BTZ-loaded FA-Gly4-PLA) and blank NPs (FA-Gly4-PLA) size, zeta, and PDI were found to be 110 ± 8.1 nm, 13.7 ± 1.01 mV, 0.19 ± 0.03 and 198 ± 9.01 nm, 8.63 ± 0.21 mV, 0.21 ± 0.08 respectively. The percent encapsulation efficiency (% EE) and percent drug loading (% DL) of BTZ loaded FA-Gly4-PLA NPs was calculated to be 78.3 ± 4.1 and 12.38 ± 2.1. The Scanning Electron Microscopy (SEM) showed that NPs were slightly biconcave in shape. The in vitro release of BTZ from FA-Gly4-PLA NPs resulted in the sustained manner. The prepared NPs were less hemolytic than BTZ. CONCLUSIONS: BTZ loaded Gly4-PLA NPs apoptotic index was found to be much higher than BTZ but lesser than BTZ loaded FA-Gly4-PLA against breast cancer cell lines (MDA-MB-231). ROS intracellular assessment assay indicated that BTZ and BTZ loaded FA-Gly4-PLA NPs exhibited higher ROS production. Conclusively, the BTZ loaded FA-Gly4-PLA NPs were able to encapsulate more BTZ than BTZ loaded Gly4-PLA NPs and were found to be more effective as per as in vitro anti-cancer effect is concerned.

Self-Emulsifying Oral Lipid Drug Delivery Systems: Advances and Challenges.

The attempts to oral delivery of lipids can be challenging. Self-emulsifying drug delivery system (SEDDS) plays a vital role to tackle this problem. SEDDS is composed of an oil phase, surfactants, co-surfactants, emulsifying agents, and co-solvents. SEDDS can be categorized into self-nano-emulsifying agents (SNEDDS) and self-micro-emulsifying agents (SMEDDS). The characterization of SEDDS includes size, zeta potential analysis, and surface morphology via electron microscopy and phase separation methods. SEDDS can be well characterized through different techniques for size and morphology. Supersaturation is the phenomenon applied in case of SEDDS, in which polymers and copolymers are used for SEDDS preparation. A supersaturated SEDDS formulation kinetically and thermodynamically inhibits the precipitation of drug molecules by retarding nucleation and crystal growth in the aqueous medium. Self-emulsification approach has been successful in the delivery of anti-cancer agents, anti-viral drugs, anti-bacterial, immunosuppressant, and natural products such as antioxidants as well as alkaloids. At present, more than four SEDDS drug products are available in the market. SEDDS have tremendous capabilities which are yet to be explored which would be beneficial in oral lipid delivery.

Heparin appended ADH-anionic polysaccharide nanoparticles for site-specific delivery of usnic acid.

The intention of present research work is to formulate usnic acid (UA) loaded heparin modified gellan gum (HAG) nanoparticles (NPs). HAG copolymer based conjugation was synthesized and characterized by 1H NMR and FT-IR spectroscopy. Plain and UA loaded HAG NPs were prepared via nanoprecipitation technique. NPs were typified and further characterized for particle size, polydispersity index, entrapment efficiency, zeta potential, atomic force microscopy, differential scanning calorimetry, X-ray diffraction analysis, and in-vitro release. In-vitro tube formation assay, tumorsphere assay, autophagy assay, DNA cleavage assay, internalization by confocal and FACS based internalization analysis, caspase assay and cell cycle assay were performed for biological activity. Obtained experimental results explored that HAG NPs displayed a sustained release of UA (95.67% in 48 h) compared to gellan gum NPs (96.12% in 8 h). In cytotoxicity studies, UA loaded HAG NPs exhibited an enormous cytotoxic potential against A549 cancer cells. In the in vivo bio-distribution study, using albino rat model the free UA concentration was found 7.09 ±â€¯0.9%, 2.7 ±â€¯1.5%, 7.5 ±â€¯2.1, 9.2 ±â€¯2%, and 6.25 ±â€¯1.3% post two hours of intravenous administration, however, in the case of UA loaded HAG NPs the obtained level was 4.1 ±â€¯1.10, 7.7 ±â€¯1.30%, 2.21 ±â€¯0.29%, 1.85 ±â€¯0.25%, 2.2 ±â€¯0.78%, 2.9 ±â€¯1.21% respectively, in heart, lung, liver, spleen, intestine and kidney. The overall anticancer study and result of internalization deciphered the higher anticancer potential of UA loaded HAG NPs.

HPMA-PLGA Based Nanoparticles for Effective In Vitro Delivery of Rifampicin.

PURPOSE: Tuberculosis (TB) chemotherapy witnesses some major challenges such as poor water-solubility and bioavailability of drugs that frequently delay the treatment. In the present study, an attempt to enhance the aqueous solubility of rifampicin (RMP) was made via co-polymeric nanoparticles approach. HPMA (N-2-hydroxypropylmethacrylamide)-PLGA based polymeric nanoparticulate system were prepared and evaluated against Mycobacterium tuberculosis (MTB) for sustained release and bioavailability of RMP to achieve better delivery. METHODOLOGY: HPMA-PLGA nanoparticles (HP-NPs) were prepared by modified nanoprecipitation technique, RMP was loaded in the prepared NPs. Characterization for particle size, zeta potential, and drug-loading capacity was performed. Release was studied using membrane dialysis method. RESULTS: The average particles size, zeta potential, polydispersity index of RMP loaded HPMA-PLGA-NPs (HPR-NPs) were 260.3 ± 2.21 nm, -6.63 ± 1.28 mV, and 0.303 ± 0.22, respectively. TEM images showed spherical shaped NPs with uniform distribution without any cluster formation. Entrapment efficiency and drug loading efficiency of HPR-NPs were found to be 76.25 ± 1.28%, and 26.19 ± 2.24%, respectively. Kinetic models of drug release including Higuchi and Korsmeyer-peppas demonstrated sustained release pattern. Interaction studies with human RBCs confirmed that RMP loaded HP-NPs are less toxic in this model than pure RMP with (p < 0.05). CONCLUSIONS: The pathogen inhibition studies revealed that developed HPR-NPs were approximately four times more effective with (p < 0.05) than pure drug against sensitive Mycobacterium tuberculosis (MTB) stain. It may be concluded that HPR-NPs holds promising potential for increasing solubility and bioavailability of RMP.

Smartly Engineered PEGylated Di-Block Nanopolymeric Micelles: Duo Delivery of Isoniazid and Rifampicin Against Mycobacterium tuberculosis.

In an attempt to deliver multiple drugs through a nanoparticulate platform, the present study was designed to deliver isoniazid (INH) and rifampicin (RMP) together through conjugation/encapsulation approaches using PEG-PLA (polyethylene glycol-poly-L-lactic acid) polymeric micelles. The objective of this study is to identify the preparation and evaluation of PEGylated polymeric micelles with dual drug delivery of INH and RMP for the effective treatment of tuberculosis (TB). Synthesized PEG-PLA di-block-copolymer was further conjugated to INH-forming PEG-PLA-INH (PPI) conjugate. Separately, these conjugates were loaded with RMP building the rifampicin-loaded PEG-PLA-INH polymeric micelles (PMC). The critical micelle concentration (CMC) for the PEG-PLA copolymer was found to be 8.9 ± 0.96 mg/L, and the size and zeta potential were observed to be 187.9 ± 2.68 nm and - 8.15 ± 1.24 mV (0.251 ± 0.042 pdi), respectively. Percent drug loading of PMC was 16.66 ± 1.52 and 23.07 ± 1.05 with entrapment efficiency of 72.30 ± 3.49 and 78.60 ± 2.67% for RMP and INH, respectively. RBC hemolysis capacity of PMC was significantly less than pure RMP and INH. Microplate Alamar blue assay (MABA) along with microscopy showed that the nanoconstructed PMC were more effective than the drugs, and approximately 8-fold reduction in overall minimum inhibitory concentration (MIC) was observed. The prepared duo drug-loaded nano-engineered polymeric micelles were highly effective against sensitive Mycobacterium tuberculosis strains and found to be less hemolytic in nature. The micelles could be further explored (in the future) for in vivo anti-TB studies to establish further to achieve better treatment for TB.

MCM-41 Nanoparticles for Brain Delivery: Better Choline-Esterase and Amyloid Formation Inhibition with Improved Kinetics.

The present study was aimed at delivering a low bioavailability drug, rivastigmine hydrogen tartrate (RTG), to the brain through its encapsulation in mesoporous silica nanoparticles (MSNs) and targeted to amyloid inhibition in the brain. MSNs were characterized for size, zeta potential, and drug entrapment using SEM, TEM, HR-TEM, FT-IR, and PXRD. Drug-loaded MSNs were assessed for in vitro release kinetics and ex vivo followed by animal studies. The average size of the prepared blank (MCM-41B) and drug-loaded MSNs (MCM-41L) was 114 ± 2.0 and 145 ± 0.4 nm with the zeta potential of approximately -43.5 ± 1.1 and -37.6 ± 1.4 mV, respectively. MCM-41L exhibited an average entrapment efficiency of 88%. In vitro release studies exhibited early surge followed by a sluggish persistent or constant release (biphasic pattern). Hemolytic studies proved that the developed MCM-41L NPs are less hemolytic compared to RTG. A reduced ThT fluorescence was observed with MCM-41L compared to MCM-41B and RTG in the amyloid inhibition studies. A significant (p < 0.05) inhibition of AChE (acetycholinesterase) was observed for MCM-41L (80 ± 4.98%), RTG (62 ± 3.25%), and MCM-41B (54 ± 4.25%). In vivo pharmacokinetics in Wistar rats revealed that the AUC and mean residence time (MRT) for MCM-41L was sustained and significantly higher (p < 0.05) (780 ± 3.30 ng/L; 5.49 ± 0.25 h) compared to RTG solution (430 ± 3.50 ng/L; 0.768 ± 0.17 h). Similarly, the half-life was found to be significantly higher in case of MCM-41L. The promising result was brain delivery of RTG in Wistar rats which was enhanced almost 127 folds in vivo, using MCM-41L nanoparticles. MCM-41L nanoparticles effectively enhanced the bioavailability of RTG. Conclusively, these can be used for the administration of RTG and other related low bioavailability drugs for improved brain delivery.

Impact of Dendrimers on Solubility of Hydrophobic Drug Molecules.

Adequate aqueous solubility has been one of the desired properties while selecting drug molecules and other bio-actives for product development. Often solubility of a drug determines its pharmaceutical and therapeutic performance. Majority of newly synthesized drug molecules fail or are rejected during the early phases of drug discovery and development due to their limited solubility. Sufficient permeability, aqueous solubility and physicochemical stability of the drug are important for achieving adequate bioavailability and therapeutic outcome. A number of different approaches including co-solvency, micellar solubilization, micronization, pH adjustment, chemical modification, and solid dispersion have been explored toward improving the solubility of various poorly aqueous-soluble drugs. Dendrimers, a new class of polymers, possess great potential for drug solubility improvement, by virtue of their unique properties. These hyper-branched, mono-dispersed molecules have the distinct ability to bind the drug molecules on periphery as well as to encapsulate these molecules within the dendritic structure. There are numerous reported studies which have successfully used dendrimers to enhance the solubilization of poorly soluble drugs. These promising outcomes have encouraged the researchers to design, synthesize, and evaluate various dendritic polymers for their use in drug delivery and product development. This review will discuss the aspects and role of dendrimers in the solubility enhancement of poorly soluble drugs. The review will also highlight the important and relevant properties of dendrimers which contribute toward drug solubilization. Finally, hydrophobic drugs which have been explored for dendrimer assisted solubilization, and the current marketing status of dendrimers will be discussed.